Bergmann MP 18
|Place of origin||German Empire|
|In service||1918–1945 (Germany)|
|Wars||World War I
Second Sino-Japanese War
Chinese Civil War
World War II
Spanish Civil War
Qingdao Iron Works
|Weight||4.18 kg (9.2 lb)|
|Length||832 mm (32.8 in)|
|Barrel length||200 mm (7.9 in)|
|Rate of fire||~500 round/min|
|Muzzle velocity||380 m/s (1,247 ft/s)|
|Feed system||32-round detachable drum magazine TM 08 (World War I); 20-, 30- and 50-round detachable box magazine (post-World War I)|
The MP 18 manufactured by Theodor Bergmann Abteilung Waffenbau was the first submachine gun used in combat. It was introduced into service in 1918 by the German Army during World War I as the primary weapon of the Sturmtruppen, assault groups specialized in trench combat. Although MP 18 production ended in the 1920s, its design formed the basis of most submachine guns manufactured between 1920 and 1960.
A common myth is that the Treaty of Versailles banned the production and use of the MP 18 by Germany. In fact, the treaty only limited the number of machine guns that Germany was permitted to stockpile, and no mention is made of machine pistols or the MP 18 in particular.
What became known as the "submachine gun" had its genesis in the early 20th Century and developed around the concepts of fire and movement and infiltration tactics, specifically for the task of clearing trenches of enemy soldiers, an environment within which engagements were unlikely to occur beyond a range of a few feet.
In 1915, the German Rifle Testing Commission at Spandau decided to develop a new weapon for trench warfare. An attempt to modify existing semi-automatic pistols, specifically the Luger and C96 Mauser failed, as accurate aimed fire in full automatic mode was impossible due to their light weight and high rate of fire of 1,200 rounds per minute. The Commission determined that a completely new kind of weapon was needed. Hugo Schmeisser, working for the Bergmann Waffenfabrik was part of a team composed of Theodor Bergmann and a few other technicians. They designed a new type of weapon to fulfill the requirements, which was designated the Maschinenpistole 18/I. It is not clear what the "I" designation is intended to indicate, although its successor, the MP28, was designated the Maschinenpistole 28/II.
Full-scale production did not begin until early 1918. Though technically not the world's first submachine gun, being beaten by the double-barreled Italian Villar-Perosa of 1915, in modern usage of the term the MP 18 is considered the world's first submachine gun since the Villar Perosa had been designed to be used as a light machine gun on aircraft before it was adapted to infantry use as a single-barreled shoulder-fired weapon in late 1918.
The MP 18 primarily served in the final stages of World War I in 1918, especially in the Kaiserschlacht offensive. At least 5,000 MP 18.1s were built and used during World War I, based upon observed serial number ranges of captured weapons; however, it is possible that up to 10,000 were built for the war.
The MP 18 proved to be an excellent weapon. Its concept was well-proven in trench fighting. The basic design directly influenced later submachine gun designs and showed its superiority over the regular infantry rifle in urban, mobile, and guerrilla warfare. The MP 18 served with German police and paramilitary forces after the end of the war. It was widely used in combat by the Freikorps Von Epp against the Spartacus League in Bavaria and by other Freikorps in Berlin, where its efficiency in urban combat was demonstrated.
All the limited conflicts between 1920 and 1940 saw an increasing use of this new class of weapons, first in South America during the Chaco War, then in Europe during the Spanish Civil War, and in China during the Japanese invasion, where its use by well-trained Chinese troops was costly for the invaders as in the Battle of Shanghai, where fierce street fights prefigured World War II urban combat of Stalingrad, Warsaw, Vienna and Berlin.
Since the treaty allowed the Weimar Republic to keep a small quantity of submachine guns for police use, a few hundred MP 18.1s were modified to accept Schmeisser's original 20-round magazine design. This modification, conducted by Haenel Waffenfabrik, required removal of the existing magazine well collar, and replacement with a different one. These weapons were overstamped with the date "1920" on the receiver and magazine well to show they were legitimate weapons owned by the Weimar Republic and not war bringbacks or clandestine weapons.
Bergmann sold the license of the MP 18. 1 to SIG Switzerland; the Swiss made model was known as SIG Bergmann 1920. It existed in .30 Luger, 9mm Parabellum and 7.63 mm Mauser. The Bergmann MP 18.1 represents a milestone both in terms of armament technology and warfare tactics. It opened the way for a whole new class of weapons and triggered the research for lighter automatic firearms to be used by mobile troops. Its first direct competitors did not see service in World War I, but most of them saw use in all the limited conflicts taking place in the inter-war period.
The Chinese produced a modified MP 18 in Tsing Tao with the assistance of Heinrich Vollmer. The French, despite being moderately interested by this class of armament because they had designed and introduced in service many semi-automatic and automatic weapons, immediately launched studies based on captured MP 18s. The design of the STA 1922 was adopted and the MAS 1924 entered service and was used in colonial war. The French MAS 35 and MAS 38 derived from one of the many prototypes of the immediate post war.
The Austrian Steyr MP 34 was created by a team of technicians led by Louis Stange who designed a submachine gun for Rheinmetall in 1919 and used Bergmann's MG 15 to design the MG 30. The SIG Bergmann 1920 was used by Finland and Estonia, it was the inspiration for the Estonian Tallinn 1923 and the Finnish Suomi model 31, which in turn inspired Degtyarev for his PPD 34.
Emil Bergmann, Theodor Bergmann's son designed the MP 32 that evolved into the MP34 as adopted by Denmark before to receive the MP35 name when adopted by nascent Wehrmacht in 1935. This submachine gun is often mistaken with the Mitraillette 34, a MP28 made in Belgium by Pieper Bayard, former Bergmann licensed manufacturer or with the MP34 made by Steyr. It is easy to identify the Bergmann MP 32/34/35 or its final version 35/1 since the cocking lever works exactly like a rifle bolt.
In 1940, with a pressing need for individual automatic weapons, the British copied the MP 28 and developed the Lanchester submachine gun for the Royal Navy. Solidly built with the use of brass for the magazine well, and a bayonet mount, it entered service in 1940. The magazine and the bolt of the MP 28 could be used in the Lanchester.
The OVP 1918, an offspring of Revelli's Villar Perosa 1915, inspired Heinrich Vollmer for his telescopic bolt used in the VPM 1930, EMP, MP 38, MP 40 and MP 41. The MP 18 remained in limited service with the German armed forces during the Second World War, specifically with the Sicherheitsdienst, later eastern foreign divisions of the Waffen SS and also with Kriegsmarine coastal artillery units.
The MP 18 was a heavy weapon, weighing over 5 kg (11.0 lb) when fully loaded. The receiver tube was very thick (~3 mm), compared with later World War II submachine guns with half that thickness or less, such as the Sten gun or MP 40.
Though Schmeisser designed a conventional 20-round-capacity "box" magazine for the weapon, the Testing Commission, for practical reasons, insisted that the MP 18 be adapted to use the 32-round TM 08 Luger "snail" drum magazine that was widely used with the long-barreled version of the P 08 pistol known as the Artillery model.
Like many other open-bolt designs, the MP 18 was prone to accidental discharge. If the buttstock of a loaded gun was given a hard knock while the bolt was fully forward, the gun could accidentally fire because of the bolt overcoming the action spring resistance and moving rearward enough to pick up a round, chamber it and fire. Soldiers liked to leave the bolt of their firearm in this closed or forward position, so dirt and debris would not enter the barrel and chamber. This 'Bolt-closure' practice acted as a dust cover for the weapon's chamber, preventing a malfunction from occurring because of the presence of foreign debris, but making accidental discharge more likely.
The German police asked for an external safety on their MP 18s, and a universal bolt-locking safety was added on all the submachine guns used by the police. Later submachine gun designs like the Sten and the MP 40 were modified to allow the cocking handle to be pushed inwards to lock the closed bolt to the tubular receiver casing. This design change prevented accidental discharges when the bolt was left forward and a loaded magazine was inserted.
The original MP 18.1 was designed to use the snail drum magazine of the Luger Artillery model pistol. This rotary design type of magazine holds 32 rounds of 9 mm Parabellum, the user having to load the magazine with a proprietary loading tool. A special sleeve was required when the snail drum was used on the MP 18 to stop the snail drum from being inserted too far in the magazine well.
After 1920, the MP 18 was modified to use a straight magazine similar to those used in the later developed MP 40 submachine gun. The MP 18 could only fire in the fully automatic mode. Its successor, the MP 28/2, received a modified mechanism with a selector for single shot or fully automatic fire.
Britain directly copied the MP28 at the beginning of World War II. The result was the Lanchester submachine gun, which saw service with the Royal Navy. The British Sten used the side-mounted magazine configuration and a simplified version of the open-bolt firing operating system of the MP28.
- Canada: Some evidence that captured MP 18s in use with Alberta Provincial Police
- Empire of Japan:(Used Switzerland version MP 18 named a SIG M1920)
- German Empire
- Russian Empire
- Ottoman Empire
- Republic of China
- Republic of Korea: (Korean Liberation Army used at Second Sino-Japanese War received by National Revolutionary Army)
- Weimar Republic
- Nazi Germany
- Romania: Large numbers of MP 28/II submachine guns were supplied to the Iron Guard by the Sicherheitsdienst.
- Soviet Union: Some of firearms captured during World War II
- Cornish, Paul (2009). Machine Guns and the Great War. Pen & Sword Books Limited. ISBN 978-1848840478.
- Cornish (2009): "It is frequently repeated as fact that the Bergmann Muskete had so impressed the Allies during the 1918 campaign that they specifically banned its production and military issue. In fact no such prohibition appears in the terms of the Treaty of Versailles. Strict controls were placed on the production of fire arms – principally by means of severely limiting the number of companies permitted to manufacture war materials – Bergmann was not among them. With regard to military issue, the numbers and types of weapons permitted to the 100,000-man German Army were carefully stipulated. There is no mention whatsoever made of machine pistols, although every other weapon type (apart from pistols) is listed – from cavalry carbines to 105mm Howitzers. Given the care that was taken to lay down such specific restrictions, it would appear that, far from having impressed the Allies, the MP 18 had not really registered on their consciousness at all. The fact that they were still unconvinced of the utility of such weapons on the eve of the Second World War would also suggest that the impact of the MP 18 on the fighting of 1918 was marginal."
- Historic Firearm of the Month, July 2000
- armement reglementaire francais les prototypes
- Mark Axworthy (1992). The Romanian Army of World War II. Osprey Publishing. p. 46. ISBN 1855321696.
- Gotz, Hans Dieter, German Military Rifles and Machine Pistols, 1871–1945, Schiffer Publishing, Ltd. West Chester, Pennsylvania, 1990. OCLC 24416255
- G. de Vries, B.J. Martens: The MP 38, 40, 40/1 and 41 Submachine gun, Propaganda Photos Series, Volume 2, Special Interest Publicaties BV, Arnhem, The Netherlands. First Edition 2001
- Smith, W.H.B, Small arms of the world: the basic manual of military small arms, Harrisburg, Pa.: Stackpole Books, 1955. OCLC 3773343
- Günter Wollert; Reiner Lidschun; Wilfried Kopenhagen, Illustrierte Enzyklopädie der Schützenwaffen aus aller Welt: Schützenwaffen heute (1945-1985), Berlin : Militärverlag der Deutschen Demokratischen Republik, 1988. OCLC 19630248
- CLINTON EZELL, EDWARD. Small arms of the world, Eleventh Edition, Arms & Armour Press, London, 1977