Jump to content

South African Class 5E1, Series 1

From Wikipedia, the free encyclopedia
(Redirected from SAR Class 5E1, Series 1)

South African Class 5E1, Series 1
No. E464 at Salt River, Cape Town, 7 January 1966
Type and origin
Power typeElectric
DesignerMetropolitan-Vickers
BuilderMetropolitan-Vickers
Serial number1032-1166
ModelMV 5E1
Build date1959-1961
Total produced135
Specifications
Configuration:
 • AARB-B
 • UICBo′Bo′
 • CommonwealthBo-Bo
Gauge3 ft 6 in (1,067 mm) Cape gauge
Wheel diameter1,220 mm (48.03 in)
Wheelbase11,279 mm (37 ft 116 in) ​
 • Bogie3,430 mm (11 ft 3+116 in)
Pivot centres7,849 mm (25 ft 9 in)
Panto shoes6,972 mm (22 ft 10+12 in)
Length:
 • Over couplers15,494 mm (50 ft 10 in)
 • Over beams14,631 mm (48 ft 0 in)
Width2,896 mm (9 ft 6 in)
Height:
 • Pantograph4,089 mm (13 ft 5 in)
 • Body height3,937 mm (12 ft 11 in)
Axle load21,591 kg (47,600 lb)
Adhesive weight86,364 kg (190,400 lb)
Loco weight86,364 kg (190,400 lb)
Electric system/s3 kV DC catenary
Current pickup(s)Pantographs
Traction motorsFour MV 281 ​
 • Rating 1 hour485 kW (650 hp)
 • Continuous364 kW (488 hp)
Gear ratio18:67
Loco brakeAir & regenerative
Train brakesVacuum
CouplersAAR knuckle
Performance figures
Maximum speed97 km/h (60 mph)
Power output:
 • 1 hour1,940 kW (2,600 hp)
 • Continuous1,456 kW (1,953 hp)
Tractive effort:
 • Starting250 kN (56,000 lbf)
 • 1 hour184 kN (41,000 lbf)
 • Continuous122 kN (27,000 lbf) @ 40 km/h (25 mph)
Career
OperatorsSouth African Railways
Spoornet
ClassClass 5E1
Number in class135
NumbersE364-E498
Delivered1959-1961
First run1959

The South African Railways Class 5E1, Series 1 of 1959 was an electric locomotive.

Between 1959 and 1961, the South African Railways placed 135 Class 5E1, Series 1 electric locomotives with a Bo-Bo wheel arrangement in mainline service. It was an upgraded and more powerful version of the Class 5E.[1][2]

Manufacturer

[edit]

The first series of the 3 kV DC Class 5E1 electric locomotive was designed and built for the South African Railways (SAR) by Metropolitan-Vickers (Metrovick) at its Bowesfield Works. Metrovick was one of the companies owned by the Associated Electrical Industries holding group (AEI) who supplied the electrical equipment. In all, 135 locomotives were delivered between 1959 and 1961, numbered in the range from E364 to E498. These were the last electric locomotives to be imported from the United Kingdom.[1][3]

Builder's plate on no. E397

The Class 5E1 was virtually identical in outward appearance to the forerunner Class 5E, but with more powerful traction motors and with a new Commonwealth bogie design that gave a smoother ride. Apart from the bogies, an externally visible difference from the Class 5E is the size and location of the small access panels on the lower body sides.[2][4][5]

Class 5E1 series

[edit]

The Class 5E1 was produced in five series, the Metrovick built Series 1 and the Union Carriage & Wagon (UCW) built Series 2 to 5. Between 1959 and 1969 altogether 690 of them were built, 135 Series 1, 130 Series 2, 100 Series 3, 100 Series 4 and 225 Series 5.[1][5]

With the exception of the Series 2 and 3, the series distinction between Class 5E1 locomotives was mainly based on the different model traction motors each was equipped with, MV 281 in Series 1, AEI 281 AZX in Series 2 and 3, AEI 281 AX in Series 4 and AEI 281 BX in Series 5. The distinction between the series 2 and 3 locomotives appears to have been based on the difference in the design of their traction motor bearings.[1][6]

Identifying features

[edit]

These dual cab locomotives had a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end was marked as the no. 2 end. A corridor along the centre of the locomotive connected the cabs, which were identical except that cab 2 was where the handbrake was located.[1]

The locomotive had two cut-outs on the roofline on the roof access ladder side, but an unbroken roofline on the opposite side. Like the predecessor Class 5E, the Class 5E1, Series 1 had two rectangular access panels on the lower sides above the battery box, but it also had an additional rectangular panel on the lower sides above the second axle from the left.

The Series 1 and 2 locomotives could be distinguished from each other by the builder's plates on their end doors, a rectangular Metropolitan-Vickers plate on Series 1 locomotives and an oval Union Carriage and Wagon plate on Series 2. The Series 3, 4 and 5 locomotives could be visually distinguished from earlier models by their three small square access panels on the lower sides above the battery box, compared to the two larger rectangular panels on the Series 1 and 2 locomotives. Series 4 and 5 locomotives could be distinguished from all earlier models by their one small square and one larger rectangular access panels on the lower sides above the second axle from the left, compared to the single rectangular panel on all earlier models.

Brakes

[edit]

The locomotive itself used air brakes, but it was only equipped to operate trains with vacuum brakes. While hauling a train, the locomotive's air brake system would be made subordinate to the train's brake system and would come into operation as the train brakes were being applied, gradually building up to its maximum pressure of 350 kilopascals (51 pounds per square inch). While working a train downgrade, the locomotive's regenerative braking system would also work in conjunction with the train brakes.

The locomotive's air brakes would usually only be used along with the train brakes during emergencies. Under normal circumstances the train would be controlled using the train brakes alone to slow down and stop.

While the locomotive was stopped, the air brakes on each bogie could be applied independently. The handbrake or parking brake, located in cab 2, only operated on the unit's last axle, the no. 7 and 8 wheels.

Traction motor bearings

[edit]

The axle-hung traction motors of all earlier SAR electric locomotives up to and including the Class 5E1, Series 1, were suspended on the axles by means of plain oil-lubricated bearings consisting of bronze shells with white metal linings. With the introduction of the more powerful Class 5E1, Series 1, considerable trouble was experienced due to flaking of the white metal linings as a result of the increased intensity of the pressure on these bearings. The use of roller bearings was investigated and one traction motor of a Class 1E locomotive was converted for trial purposes. Since satisfactory results were obtained, it was decided to equip the traction motors of the subsequent UCW built Series 2 and later locomotives with roller-type suspension bearings.[6]

Liveries

[edit]

Prior to 1960, green was the traditional colour for electric locomotives, with yellow whiskers and side-stripes being added in the late 1950s. When the SAR celebrated 100 years of railways in South Africa in 1960, new colour schemes were adopted for passenger stock as well as electric and diesel-electric locomotives. Gulf Red with signal red cowcatchers was the colour initially chosen for locomotives and the yellow whiskers and stripes were carried over from the earlier green livery. The yellow side-stripes were initially applied to the full body-length of electric locomotives, but these were later curtailed to just beyond the cab-sides, with the number plates on the sides enclosed in three-stripe wings.[7]

The early deliveries of Series 1 units still entered service in the bottle green and yellow whiskers livery with red cowcatchers. The later arrivals of Series 1 locomotives were delivered in this newly adopted livery. The change from the green to the red livery appears to have occurred somewhere between no. E446 in green and no. E451 in Gulf Red. The units were delivered in plain green or red and the yellow whiskers were added in South Africa during their erection.[3][5][8]

Some selected electric and diesel-electric locomotives were painted blue for use with the Blue Train, but without altering the layout of the various paint schemes. Blue Train locomotives were therefore blue with yellow whiskers in the SAR era. During the 1970s eight Class 5E1, Series 1 locomotives, numbers E441 to E448, were painted blue with yellow whiskers for use with the Blue Train between Cape Town and Beaufort West in the Cape Western region. By 1981 they were all back in pool service and were gradually repainted to Gulf Red and whiskers again as they were shopped for major overhauls.[4]

Service

[edit]

The Class 5E1 family served on all 3 kV DC electrified mainlines country-wide for almost forty years. The Class 5E1 worked the vacuum-braked goods and mainline passenger trains over the lines radiating south, west and north of Durban almost exclusively until the mid-1970s and Class 6E1s only became regular motive power in Natal when air-braked car trains began running between Durban and the Reef.[8]

By the early 2000s the Series 1 locomotives had all been withdrawn from SAR service. Unit no. E496 was still in service by 2014 as shop shunting locomotive at MetroRail's depot at Salt River, Cape Town, painted in a grey and yellow livery to match that of Metrorail’s carriages, with yellow cowcatchers and with reflective stripe whiskers on the ends. Apart from this unit, the shells of numbers E397 and E461 have been converted to a club room at Sentrarand. No more of the Metrovick built Class 5E1, Series 1 are known to have survived. While these two shells are now painted in the SAR Blue Train livery, neither unit wore the blue livery while still in service.[4]

Works numbers

[edit]

The Metrovick works numbers of the Class 5E1, Series 1 and their years of construction are listed in the table.[4]

Illustration

[edit]

The main picture shows no. E464 at the Salt River Depot, Cape Town, on 7 January 1966. The Series 1 locomotives served only in the SAR livery with whiskers, be it bottle green, Gulf Red or Blue Train blue.

References

[edit]
  1. ^ a b c d e South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended
  2. ^ a b Dulez, Jean A. (2012). Railways of Southern Africa 150 Years (Commemorating One Hundred and Fifty Years of Railways on the Sub-Continent – Complete Motive Power Classifications and Famous Trains – 1860–2011) (1st ed.). Garden View, Johannesburg, South Africa: Vidrail Productions. p. 293. ISBN 9 780620 512282.
  3. ^ a b c Soul of A Railway, System 6, Part 1: Durban Old Station. Captions 24, 43, 45, 51. (Accessed on 8 March 2017)
  4. ^ a b c d Middleton, John N. (2002). Railways of Southern Africa Locomotive Guide - 2002 (as amended by Combined Amendment List 4, January 2009) (2nd, Dec 2002 ed.). Herts, England: Beyer-Garratt Publications. pp. 50, 53.
  5. ^ a b c Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 128. ISBN 0869772112.
  6. ^ a b SAR&H Annual Report 1963-64, Research - Mechanical engineering. p. 73.
  7. ^ Soul of A Railway, System 7, Western Transvaal, based in Johannesburg, Part 9. South-Eastwards as far as Volksrust (2nd part) by Les Pivnic. Caption 4. (Accessed on 11 April 2017)
  8. ^ a b Soul of A Railway, System 6, Part 3: Durban Harbour, Wests, the Bluff & Cato Creek to Congella; featuring SAR & H Harbour Craft. Captions 88-93, 98. (Accessed on 11 March 2017)