Jump to content

Transcode (character encoding)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Cyberbot II (talk | contribs) at 09:50, 26 February 2016 (Rescuing 1 sources. #IABot). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Transcode, or Transmission Code, was a 6-bit plus parity BCD character set which was used by IBM for a short time for Binary Synchronous communications. The IBM 2780 data transmission terminal was announced with Transcode support in 1967. The IBM 3780 data communication terminal, the 2780 successor announced in 1972, dropped Transcode support.

Transcode was a 64 character set including twenty-six upper case alphabetic characters, ten numerics, thirteen special characters, and sixteen control characters. Characters were transmitted with odd parity.[1]

Character
 
Punched card
code
6-bit
transcode
Hex 
SOH 12-9-1              P 00
A 12-1            5   01
B 12-2          4     02
C 12-3          4 5 P 03
D 12-4        3       04
E 12-5        3   5 P 05
F 12-6        3 4   P 06
G 12-7        3 4 5   07
H 12-8      2         08
I 12-9      2     5 P 09
STX 12-0-2      2   4   P 0A
. 12-9-3      2   4 5   0B
12-9-4      2 3     P 0C
BEL 0-9-8-7      2 3   5   0D
Sub 9-8-7      2 3 4     0E
ETB 9-8-6      2 3 4 5 P 0F
& 12    1           10
J 11-1    1       5 P 11
K 11-2    1     4   P 12
L 11-3    1     4 5   13
M 11-4    1   3     P 14
N 11-5    1   3   5   15
O 11-6    1   3 4     16
P 11-7    1   3 4 5 P 17
Q 11-8    1 2       P 18
R 11-9    1 2     5   19
Space no punch    1 2   4     1A
$ 11-8-3    1 2   4 5 P 1B
* 11-8-4    1 2 3       1C
US 11-9-8-7    1 2 3   5 P 1D
EOT 9-7    1 2 3 4   P 1E
DLE 12-11-9-8-1    1 2 3 4 5   1F
- 11  0             20
/ 0-1  0         5 P 21
S 0-2  0       4   P 22
T 0-3  0       4 5   23
U 0-4  0     3     P 24
V 0-5  0     3   5   25
W 0-6  0     3 4     26
X 0-7  0     3 4 5 P 27
Y 0-8  0   2       P 28
Z 0-9  0   2     5   29
ESC 9-8-7  0   2   4     2A
' 0-8-3  0   2   4 5 P 2B
% 0-8-4  0   2 3       2C
ENQ 0-9-8-5  0   2 3   5 P 2D
ETX 12-9-3  0   2 3 4   P 2E
HT 12-9-5  0   2 3 4 5   2F
0 0  0 1         P 30
1 1  0 1       5   31
2 2  0 1     4     32
3 3  0 1     4 5 P 33
4 4  0 1   3       34
5 5  0 1   3   5 P 35
6 6  0 1   3 4   P 36
7 7  0 1   3 4 5   37
8 8  0 1 2         38
9 9  0 1 2     5 P 39
SYN 9-2  0 1 2   4   P 3A
# 8-3  0 1 2   4 5   3B
@ 8-4  0 1 2 3     P 3C
NAK 9-8-5  0 1 2 3   5   3D
EM 11-9-8-1  0 1 2 3 4     3E
DEL 12-9-7  0 1 2 3 4 5 P 3F

Devices using Transcode

References

  1. ^ IBM Corporation (1971). Component Description: IBM 2780 Communications Terminal (PDF). Archived from the original (PDF) on September 29, 2011. {{cite book}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)