IEEE Standards Association

The Institute of Electrical and Electronics Engineers Standards Association (IEEE-SA) is an organization within IEEE that develops global standards in a broad range of industries, including: power and energy, biomedical and health care, information technology, telecommunication, transportation, nanotechnology, information assurance, and many more.

IEEE-SA has developed standards for over a century, through a program that offers balance, openness, fair procedures, and consensus. Technical experts from all over the world participate in the development of IEEE standards.

IEEE-SA is not a body formally authorized by any government, but rather a community. Formally recognized international standards organizations (ISO, IEC, ITU, CEN) are federations of national standards bodies (American ANSI, German DIN, Japanese JISC, etc.).

Standards and the IEEE Standards Development Process

Each year, the IEEE-SA conducts over 200 standards ballots, a process by which proposed standards are voted upon for technical reliability and soundness. In 2005, IEEE had close to 900 active standards, with 500 standards under development. One of the more notable are the IEEE 802 LAN/MAN group of standards, with the widely used computer networking standards for both wired (ethernet) and wireless (IEEE 802.11) networks.

The IEEE standards development process can be broken down into seven basic steps:

1. Securing Sponsorship: An IEEE-approved organization must sponsor a standard. A sponsoring organization is in charge of coordinating and supervising the standard development from inception to completion. The professional societies within IEEE serve as the natural sponsor for many standards.
2. Requesting Project Authorization: To gain authorization for the standard a Project Authorization Request (PAR) is submitted to the IEEE-SA Standards Board. The New Standards Committee (NesCom) of the IEEE-SA Standards Board reviews the PAR and makes a recommendation to the Standards Board about whether to approve the PAR.
3. Assembling a Working Group: After the PAR is approved, a working group of individuals affected by, or interested in, the standard is organized to develop the standard. IEEE-SA rules ensure that all Working Group meetings are open and that anyone has the right to attend and contribute to the meetings.
4. Drafting the Standard: The Working Group prepares a draft of the proposed standard. Generally, the draft follows the IEEE Standards Style Manual that sets guidelines for the clauses and format of the standards document.
5. Balloting: Once a draft of the standard is finalized in the Working Group, the draft is submitted for Balloting approval. The IEEE Standards Department sends an invitation-to-ballot to any individual who has expressed an interest in the subject matter of the standard. Anyone who responds positively to the invitation-to-ballot becomes a member of the balloting group, as long as the individual is an IEEE Standards Association member or has paid a balloting fee. The IEEE requires that a proposed draft of the standard receive a response rate of 75% (i.e., at least 75% of potential ballots are returned) and that, of the responding ballots, at least 75% approve the proposed draft of the standard. If the standard is not approved, the process returns to the drafting of the standard step in order to modify the standard document to gain approval of the balloting group.
6. Review Committee: After getting 75% approval, the draft standard, along with the balloting comments, are submitted to the IEEE-SA Standards Board Review Committee (RevCom). The RevCom reviews the proposed draft of the standard against the IEEE-SA Standards Board Bylaws and the stipulations set forth in the IEEE-SA Standards Board Operations Manual. The RevCom then makes a recommendation about whether to approve the submitted draft of the standard document.
7. Final Vote: Each member of the IEEE-SA Standards Board places a final vote on the submitted standard document. In some cases external members are invited to vote. It takes a majority vote of the Standards Board to gain final approval of the standard. In general, if the RevCom recommends approval, the Standards Board will vote to approve the standard.

Notable IEEE Standards committees and formats

IEEE 260	Standard Letter Symbols for Units of Measurement, IEEE-260-1978 (now 260.1-2004).
IEEE 488	Standard Digital Interface for Programmable Instrumentation, IEEE-488-1978 (now 488.1).
IEEE 610	Standard Glossary of Software Engineering Terminology.
IEEE 754	floating point arithmetic specifications.
IEEE 802	LAN/MAN
IEEE 802.1	Standards for LAN/MAN bridging and management and remote media access control (MAC) bridging.
IEEE 802.2	Standards for Logical Link Control (LLC) standards for connectivity.
IEEE 802.3	Ethernet Standards for Carrier Sense Multiple Access with Collision Detection (CSMA/CD).
IEEE 802.4	Standards for token passing bus access.
IEEE 802.5	Standards for token ring access and for communications between LANs and MANs
IEEE 802.6	Standards for information exchange between systems.
IEEE 802.7	Standards for broadband LAN cabling.
IEEE 802.8	Fiber optic connection.
IEEE 802.9	Standards for integrated services, like voice and data.
IEEE 802.10	Standards for LAN/MAN security implementations.
IEEE 802.11	Wireless Networking – "WiFi".
IEEE 802.12	Standards for demand priority access method.
IEEE 802.14	Standards for cable television broadband communications.
IEEE 802.15.1	Bluetooth
IEEE 802.15.4	Wireless Sensor/Control Networks – "ZigBee"
IEEE 802.16	Wireless Networking – "WiMAX"
IEEE 829	Software Test Documentation
IEEE 830	Software Requirements Specifications.
IEEE 896	Futurebus
IEEE 1003	Unix compatibility programming standard - POSIX
IEEE 1044	Standard Classification for Software Anomalies
IEEE 1059	Software Verification And Validation Plan
IEEE 1073	Point of Care Medical Device Communication Standards
IEEE 1074	Software Development Life Cycle
IEEE 1076	VHDL – VHSIC Hardware Description Language
IEEE 1149.1	JTAG
IEEE 1149.6	AC-JTAG
IEEE 1180	Discrete cosine transform accuracy
IEEE 1275	Open Firmware
IEEE 1284	Parallel port
IEEE P1363	Public key cryptography
IEEE 1394	Serial bus - "FireWire", "i.Link"
IEEE 1471	software architecture / system architecture
IEEE 1541	Prefixes for Binary Multiples
IEEE 1584	Guide for Performing Arc Flash Hazard Calculations
IEEE 1588	Precision Time Protocol
IEEE P1619	Security in Storage Working Group (SISWG)
IEEE 1667	Standard Protocol for Authentication in Host Attachments of Transient Storage Devices
IEEE 1801	Unified Power Format
IEEE 1900	Dynamic Spectrum Access Networks (DySPAN)
IEEE 1901	Broadband over Power Line Networks
IEEE 2600	Hardcopy Device and System Security (and related ISO/IEC 15408 Protection Profiles)
IEEE 12207	Information Technology - Software life-cycle processes
IEEE Switchgear Committee	C37 series of standards for Low and High voltage equipment

Awards

The IEEE Standard Association Award is presented annually to an IEEE-SA individual member (who is also an IEEE member) who has made an extraordinary contribution to establishing the IEEE-SA as a world-class leader in standardization. Recognition consists of a crystal globe and certificate.

External links

• IEEE Standards website
• IEEE JTAG 1149.x Standards