RS-56
| Country of origin | United States |
|---|---|
| Manufacturer | Rocketdyne |
| Liquid-fuel engine | |
| Propellant | LOX / RP-1 |
| Cycle | Gas-generator cycle |
| Performance | |
| Thrust, sea-level | RS-56-OBA: 207,000 lbf (920.8 kN) RS-56-OSA: 60,500 lbf (269.0 kN) |
| Chamber pressure | 4.8 MPa (48 bar) |
| Specific impulse, vacuum | RS-56-OBA: 299 s (2.93 km/s) RS-56-OSA: 316 s (3.10 km/s) |
| Specific impulse, sea-level | RS-56-OBA: 263 s (2.58 km/s) RS-56-OSA: 220 s (2.2 km/s) |
| Burn time | RS-56-OBA: 172 RS-56-OSA: 283 sec |
| Dimensions | |
| Length | RS-56-OBA: 11.3 ft (3.43 m) 8.9 ft (2.7 m) |
| Diameter | RS-56-OBA: 8.0 ft (2.45 m) 10.0 ft (3.05 m) |
| Used in | |
| Atlas II | |
RS-56 was an American liquid fueled rocket engine, developed by Rocketdyne. RS-56 was derived from the RS-27 rocket engine.[1] Two variants of this engine were built, both for use on the Atlas II rocket series. The first, RS-56-OBA, was a booster engine, while the RS-56-OSA was designed for use as a sustainer and produced lower thrust but at a higher specific impulse.[2][3]
References
- ^ "Atlas IIA(S) Data Sheet". Space Launch Report. Retrieved 9 January 2016.
- ^ Lua error in Module:Citation/CS1/Date_validation at line 961: bad argument #3 to 'format' (string expected, got nil).
- ^ Lua error in Module:Citation/CS1/Date_validation at line 961: bad argument #3 to 'format' (string expected, got nil).
| Liquid fuel |
|  | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Solid fuel |
| |||||||||||||||||
| ||||||||||||||||||