CNP-300
The CNP-300 is a pressurized water nuclear reactor developed by the China National Nuclear Corporation (CNNC).
It is China's first domestic commercial nuclear reactor design, with development beginning in the 1970s based on a nuclear submarine reactor design.[1][2]
The reactor has a thermal capacity of 999 MW and a gross electrical capacity of 325 MW, with a net output of about 300 MWe and a single-loop design.[3]
The first CNP-300 unit started operations in Qinshan Nuclear Power Plant in 1991.[1]
The CNP-300 was the first Chinese nuclear reactor to be exported, with the installation of the first unit at Chashma Nuclear Power Plant in Pakistan.[4] The unit began operation in 2000. Another unit was completed in 2011 and two more units began operation in 2016 and 2017 at the same plant.
See also
[edit]References
[edit]- ^ a b "Chinese reactor design evolution - Nuclear Engineering International". www.neimagazine.com. Retrieved 28 May 2018.
- ^ Biello, David (29 March 2011). "China forges ahead with nuclear energy". Nature. doi:10.1038/news.2011.194. Retrieved 28 May 2018.
- ^ "Status of Small and Medium Sized Reactor Designs" (PDF). International Atomic Energy Agency. September 2011. Retrieved 28 May 2018.
- ^ "UxC: SMR Design Profile". www.uxc.com. Retrieved 29 May 2018.
 | This article about nuclear power and nuclear reactors for power generation is a stub. You can help Wikipedia by expanding it. |
| Operating power plants | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Power plants under construction | |||||||||||
| Planned power plants |
| ||||||||||
| Proposed power plants | |||||||||||
| Research, experimental and prototype reactors | |||||||||||
| Commercial reactor designs | |||||||||||
| Organizations |
| ||||||||||
| Related categories | |||||||||||
