Jump to content

Explorer 32

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ninney (talk | contribs) at 17:49, 15 April 2015 (Copyedit (minor)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Explorer 32
Scientist working on satellite using a tool on the presumed front of the craft
Names
  • Atmosphere Explorer-B
  • 02183
Mission typeAeronomy
OperatorNASA - Office of Space Science Applications
COSPAR ID1966-044A Edit this at Wikidata
SATCAT no.02183
WebsiteNSSDC Master Catalog - Explorer 32
Mission duration10 months
Spacecraft properties
Payload mass224.5 kilograms (495 lb)
Start of mission
Launch date13:55:00, May 25, 1966 (1966-05-25T13:55:00)
RocketDelta-C1
Launch siteCape Canaveral, United States
End of mission
DisposalDeorbited (battery failure)
Decay dateFebruary 22, 1985 (1985-02-22)
Orbital parameters
Eccentricity0.15532
Apogee altitude2,725 kilometres (1,693 mi)
Inclination64.67°
Period116 minutes
Argument of perigee276 kilometres (171 mi)
Earth orbiter
Payload
Ion Mass Spectrometer
Neutral Particle Magnetic Mass Spectrometer
Satellite Drag Atmospheric Density
Pressure Gauges
Electron Temperature and Density
Instruments
Mass Spectrometer

Explorer 32, also known as Atmosphere Explorer-B (AE-B), was a satellite launched by the United States to study the Earth's upper atmosphere. It was launched from Cape Canaveral on a Delta-C1 rocket, on May 25, 1966. It was the second of five Atmosphere Explorers, the first being Explorer 17.

Technical specifications

Explorer 32 was a stainless steel, vacuum-sealed sphere, 0.889 metres (2.92 ft) in diameter.[1] It carried one ion and two neutral mass spectrometers, three magnetron density gauges, and two electrostatic probes. It used a tape recorder to save data that was acquired when the satellite was not in range of one of the 13 ground stations. It was powered by silver-zinc batteries and a solar cell array.

The satellite had an operational life of 10 months. The two neutral mass spectrometers failed a few days after launch, but the remaining instruments operated throughout most of the satellite's lifetime. Explorer 32 suffered a depressurization which led to battery failure, at which point it ceased functioning.[1]

Scientific experiments

Explorer 32 was designed to directly measure the temperature, composition, density, and pressure of the upper atmosphere.[2]

The ion mass spectrometers measured the concentrations of different types of ions in the topside ionosphere, principally atomic hydrogen, helium, nitrogen, and oxygen. The concentrations were recorded as a function of time, location, and solar and geomagnetic activity. The satellite was able to perform a global study of the diurnal variation of the atmosphere during nearly two complete diurnal cycles, since the orbit plane precessed one revolution each 5.5 months. The data from the ion mass spectrometers allowed for studies of: (1) the diurnal and seasonal variation of atmospheric ion composition, (2) the effect of atmospheric winds on the atomic hydrogen-atomic oxygen ion transition level, (3) the density and temporal variation of thermospheric atomic hydrogen, and (4) the altitude variation of ion composition in the midlatitude trough region.

The three magnetron density gauges measured the density of the neutral atmosphere as a function of altitude, time, latitude, and solar and geomagnetic activity.[3]

The electron temperature and density instrument measure the distribution of electron temperatures and densities using a swept voltage electron probe.[3]

The two neutral particle magnetic mass spectrometers were intended to measure the composition of the neutral atmosphere at altitudes between 285 and 1,000 kilometres (935,000 and 3,281,000 ft). One spectrometer failed after 4 days, and the other failed after 7 days in orbit.

The satellite drag atmospheric density experiment measured the density of the upper atmosphere as a function of altitude, latitude, season, and solar activity. The experiment was possible due to the symmetrical shape of Explorer 32. When the satellite was near perigee, it was observed by networks of ground-based Baker-Nunn cameras, as well as being tracked by radio and radar. Sequences of these observations were used to deduce the density of the atmosphere that the satellite was passing through.[4]

See also

References

  1. ^ a b "NSSDC/COSPAR ID: 1966-044A". NSSDC Master Catalog Search. National Aeronautics and Space Administration. Retrieved March 22, 2015.
  2. ^ "Atmosphere and Earth Sciences". planet4589.org. Retrieved March 22, 2015.
  3. ^ a b "In situ measurements of neutral and electron density wave structure from the Explorer 32 satellite". Retrieved April 15, 2015.
  4. ^ "Resolution of the difference between atmospheric density measurements from Explorer 17 satellite by density gage and drag techniques". Retrieved April 15, 2015.