Jump to content

Monkey's Audio

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Xhienne (talk | contribs) at 01:41, 21 February 2016 (rv - please provide a source that proves that there is a correlation with the Norwegian word ape). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Template:Distinguish2

Monkey's Audio
Developer(s)Matthew T. Ashland
Initial release2000; 24 years ago (2000)
Stable release
4.16 / 24 March 2015; 9 years ago (2015-03-24)
TypeAudio compression, Encoder
LicenseMonkey's Audio Source Code License Agreement
Websitewww.monkeysaudio.com

Monkey's Audio is an algorithm and file format for lossless audio data compression. Monkey's Audio does not discard data during the process of encoding, unlike lossy compression methods such as AAC, MP3, Vorbis and Musepack.

Data file compression is employed in order to reduce bandwidth, file transfer time, or storage requirements. A digital recording (such as a CD) encoded to the Monkey's Audio format can be decompressed into an identical copy of the original audio data. As with the FLAC and Apple Lossless format, files encoded to Monkey's Audio are typically reduced to about half of the original size,[1] with data transfer rates and bandwidth requirements being reduced accordingly.

Monkey's Audio's advantages are better compression rates compared to FLAC and WavPack,[2][3][4] as well as multithreading/multicore support.[5] Monkey's Audio main drawbacks are the fact that it employs a symmetric algorithm, meaning the decoding takes comparable resources to encoding, which makes it unsuitable for all but the fastest portable players (via Rockbox firmware),[6] and that it has limited support on software platforms other than Windows; on other platforms only decoding is officially supported by third-party programs. Although the original source code is freely available, the license is not considered to be an open source one.[7][8] A GPL version of the decoder has been independently written for Rockbox and then included in ffmpeg.[8][9]

Monkey's Audio files use the filename extension .ape for audio, and .apl for track metadata.

Comparisons

Like any lossless compression scheme, Monkey's Audio format takes up several times as much space as lossy compression formats like AAC, MP3 and Vorbis. A Monkey's Audio file is 3–5 times as large as a 192 kbit/s bitrate MP3 file.

The latest version of Monkey's Audio, Version 4.16, was released on 2015-03-24. The Shorten format, popular with live taping enthusiasts for years, is no longer in development, but is still in use on some sites such as etree. FLAC has an active development community that continues to refine the format. Because Monkey's Audio is relatively slow when encoding or decoding files (what FLAC accomplishes in several seconds can take a minute or more with Monkey's Audio) FLAC has largely eclipsed it as the preferred format for commercial distribution of lossless audio.

Although Monkey's Audio is distributed as freeware, the source code includes license terms that prevent most Linux distributions and other free software projects from including it.[7] In contrast, FLAC has only open source licenses, so it comes pre-installed with most Linux distributions, is preferred by Linux users, and enjoys broad support in applications.

Supported platforms

Officially, Monkey's Audio is available only for the Microsoft Windows platform. As of version 4.02 (19 January 2009) a DirectShow filter is distributed with the installer, allowing for compatibility with most software MP3 players running on the Windows operating system.[5]

Monkey's Audio is also supported on Linux and OS X using JRiver Media Center.

The multi-platform ffmpeg supports decoding Monkey's Audio files since version 0.5.[9] A GStreamer plug-in is also available, but only for the older 0.8.x version.[10] A number of Mac OS X players and rippers support the format as well.[11]

While the license text claims to permit using the official Monkey's Audio codec in GPL projects, several Linux distribution maintainers have found the license to be contradictory. It does not permit redistribution or modification, and thus is not considered open source or free software.[7][8]

Monkey's Audio files can be encoded and decoded on any platform which has a J2SE implementation, by the means of the unofficial JMAC library, which is Free software licensed under the GNU LGPL.

Hardware support

Monkey's Audio is supported natively on all modern Cowon media players.

On other hardware platforms, the open source jukebox firmware project Rockbox supports playback of Monkey's Audio-encoded files on most of its supported targets, but many lack sufficient processing power to play the files back in real time on any but the lowest compression settings.[6]

The FiiO X Series portable music players support Monkey's Audio.

See also

References

  1. ^ Monkey's Audio official comparison
  2. ^ "Flake: FLAC Encoder". Flake-enc.sourceforge.net. 6 November 2007.
  3. ^ "Lossless audio codec comparison". www.audiograaf.nl. 6 January 2015.
  4. ^ "Comparison of lossless audio compressors". Members.home.nl. 7 February 2005.
  5. ^ a b "Monkey's Audio - a fast and powerful lossless audio compressor". Monkeysaudio.com.
  6. ^ a b "SoundCodecMonkeysAudio < Main < Wiki". Rockbox.org. 5 November 2010.
  7. ^ a b c Gentoo Bug 94477 - new ebuild: media-sound/mac (Linux ported version of Monkey's Audio converter)
  8. ^ a b c Michael Sebastian (25 June 2007). "Ubuntu bug entry about Monkey's audio inclusion".
  9. ^ a b http://ffmpeg.org/releases/ffmpeg-0.5.changelog
  10. ^ "Release notes for GStreamer Monkey's Audio Plug-in 0.8.2 "Is there a monkey in your pants?"". Gstreamer.freedesktop.org.
  11. ^ "Audio - Software for Macintosh". Pure Mac.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Monkey%27s_Audio&oldid=706033213"