South African Class GEA 4-8-2+2-8-4

South African Class GEA & GEAM 4-8-2+2-8-4
No. 4010 and sister at Steenbras, 13 August 1973
Type and origin ♠ Locomotive as built ♥ Locomotive with modified front water tank Power type Steam Designer South African Railways (Dr. M.M. Loubser) Builder Beyer, Peacock and Company Serial number 7168-7217 Model Class GEA Build date 1945-1947 Total produced 50
Specifications Configuration: ​  • Whyte 4-8-2+2-8-4 (Double Mountain)  • UIC 2'D1'+1'D2'h4t Driver 3rd & 6th coupled axles Gauge 3 ft 6 in (1,067 mm) Cape gauge Leading dia. 28+1⁄2 in (724 mm) Coupled dia. 48 in (1,219 mm) Trailing dia. 34 in (864 mm) Minimum curve 275 ft (84 m) Wheelbase 80 ft 10 in (24,638 mm) ​  • Engine 28 ft 4 in (8,636 mm) each  • Leading 6 ft 4 in (1,930 mm) each  • Coupled 13 ft 4+1⁄2 in (4,077 mm) each Pivot centres 37 ft 9 in (11,506 mm) Length: ​  • Over couplers 88 ft 5 in (26,949 mm) Height 13 ft (3,962 mm) Frame type Bar Axle load ♠ 15 LT (15,240 kg) ♥ 15 LT (15,240 kg) ​  • Leading ♠ 22 LT 7 cwt (22,710 kg) front 22 LT 7 cwt (22,710 kg) rear ♥ 22 LT 7 cwt (22,710 kg) front 20 LT 10 cwt (20,830 kg) rear  • 1st coupled ♠ 14 LT (14,220 kg) ♥ 13 LT 6 cwt (13,510 kg)  • 2nd coupled ♠ 15 LT (15,240 kg) ♥ 14 LT 7 cwt (14,580 kg)  • 3rd coupled ♠ 15 LT (15,240 kg) ♥ 15 LT (15,240 kg)  • 4th coupled ♠ 14 LT (14,220 kg) ♥ 13 LT 7 cwt (13,560 kg)  • 5th coupled ♠ 14 LT (14,220 kg) ♥ 13 LT 6 cwt (13,510 kg)  • 6th coupled ♠ 15 LT (15,240 kg) ♥ 14 LT 19 cwt (15,190 kg)  • 7th coupled ♠ 15 LT (15,240 kg) ♥ 14 LT 16 cwt (15,040 kg)  • 8th coupled ♠ 14 LT (14,220 kg) ♥ 13 LT 15 cwt (13,970 kg)  • Trailing ♠ 13 LT 3 cwt (13,360 kg) front 18 LT 8 cwt (18,700 kg) rear ♥ 13 LT 3 cwt (13,360 kg) front 13 LT 2 cwt (13,310 kg) rear Adhesive weight ♠ 116 LT (117,900 kg) ♥ 112 LT 16 cwt (114,600 kg) Loco weight ♠ 187 LT (190,000 kg) ♥ 183 LT 18 cwt (186,900 kg) Fuel type Coal Fuel capacity 10 LT (10.2 t) Water cap. 3,800 imp gal (17,300 L) front 1,800 imp gal (8,180 L) rear Firebox: ​  • Type Round-top  • Grate area 51.3 sq ft (4.77 m2) Boiler: ​  • Pitch 8 ft 6 in (2,591 mm)  • Diameter 6 ft 9 in (2,057 mm)  • Tube plates 11 ft 8+5⁄8 in (3,572 mm)  • Small tubes 282: 2 in (51 mm)  • Large tubes 36: 5+1⁄2 in (140 mm) Boiler pressure 200 psi (1,379 kPa) Safety valve Ross-pop Heating surface: ​  • Firebox 185 sq ft (17.2 m2)  • Tubes 2,328 sq ft (216.3 m2)  • Arch tubes 27 sq ft (2.5 m2)  • Total surface 2,540 sq ft (236 m2) Superheater: ​  • Heating area 470 sq ft (44 m2) Cylinders Four Cylinder size 18+1⁄2 in (470 mm) bore 26 in (660 mm) stroke Valve gear Walschaerts Valve type Piston Valve travel 6+1⁄2 in (165 mm) Couplers AAR knuckle
Performance figures Tractive effort 55,620 lbf (247.4 kN) @ 75%
Career Operators South African Railways Class Class GEA Number in class 50 Numbers 4001-4050 Delivered 1946-1947 First run 1946 Withdrawn 1976

The South African Railways Class GEA 4-8-2+2-8-4 of 1946 was an articulated steam locomotive.

During 1946 and 1947, the South African Railways placed fifty Class GEA Garratt articulated steam locomotives with a 4-8-2+2-8-4 Double Mountain type wheel arrangement in service.

Manufacturer

The Class GEA 4-8-2+2-8-4 Double Mountain type Garratt locomotive was the first new post-Second World War locomotive class to be introduced on the South African Railways (SAR). It was designed by Dr. M.M. Loubser, Chief Mechanical Engineer (CME) of the SAR from 1939 to 1949, and although it was a development of the Class GE 2-8-2+2-8-2 locomotive, it bore little resemblance to the older locomotive.

Dr. M.M. Loubser

It had a boiler which was designed to be inter­change­able with that of the earlier Garratt model regarding external dimensions, but it had a bar frame and a round-topped firebox instead of the plate frame and Belpaire firebox of the earlier locomotive. The Class GEA was the first South African Garratt to have streamlined water tanks and coal bunkers and its engine units were radically different from those of the Class GE, with an expanded wheel arrangement in the form of a leading four-wheeled bogie instead of a two-wheeled Bissel truck.

An order for fifty locomotives was placed with Beyer, Peacock and Company in 1945, the largest single Garratt order ever placed with them. When they were delivered during 1946 and 1947, they were erected at the Uitenhage shops and numbered in the range from 4001 to 4050.

Characteristics

The locomotives were superheated and had Walschaerts valve gear. They were the only post-war Garratts on the SAR to be without mechanical stokers and also one of the largest designs of Garratt to be manually stoked.

Its round-topped firebox was fitted with eight flexible cross-stays at the front end. The inner firebox was of steel instead of copper and it had a hopper type ashpan, fitted with an efficient arrangement of drench pipes. The ashpan doors were steam-operated with provision for hand operation when required. The finger bar fire grate was operated by two steam shaker cylinders and had two drop grates. The boiler pressure was 20 pounds per square inch (138 kilopascals) higher than that of the Class GE and it had a larger superheater area with 36 elements and incorporating a multiple valve regulator. The locomotive had a self-cleaning smokebox and was fitted with a spark arrester.

Instead of plate frames, it was built on bar frames of 4 inches (102 millimetres) thick rolled steel bar with a tensile strength of 32 to 38 long tons per square inch (5 to 6 tonnes per square centimetre). The pivots were of the adjustable type and were oil lubricated. The wheel arrangement was extended from a 2-8-2+2-8-2 Double Mikado to a 4-8-2+2-8-4 Double Mountain configuration, which permitted increased coal and water capacities. It had 2 inches (51 millimetres) larger diameter coupled wheels, all flanged. The locomotive was designed to negotiate a minimum curve of 275 feet (84 metres) radius, with 4+1⁄2 inches (114 millimetres) superelevation and gauge widening not exceeding 3⁄4 inch (19 millimetres).

The outer bogies had two-pin swing links and laminated side control springs which provided for a total side-play of 7 inches (178 millimetres). The outer pairs of bogie wheels were arranged with tyre flange watering gear. The inner bissel trucks were of the radial-arm type with helical spring side control and a total side-play of 4 inches (102 millimetres). The bogies and bissels both had Timken roller bearing axle boxes. The front engine unit had two 21 inches (533 millimetres) diameter vacuum brake cylinders, while the hind engine units were provided with steam and hand brakes.

The cab arrangement was made especially convenient for the crew. The double roof was lined with teak while side louvre ventilators with roller slides were fitted. The cab front and sides had ventilating doors. Sliding louvres in the cab sides provided adequate weather protection while the lookout had hinged adjustable glass windscreens. The cab was completely enclosed with sliding side doors and the crew had upholstered hinged seats with armrests.

At least one locomotive was named. No. 4023 bore the name Peacock on a plate mounted above its cabside number plates.

Modifications

Soon after they entered service, the front tanks of some of the locomotives were modified. While the tank capacity apparently remained the same, the all-up weight of the modified locomotives and their adhesive weight were 4 long tons (4,064 kilograms) less and their individual axle loads were different, although their maximum axle loads remained at 15 long tons (15,240 kilograms).

Two locomotives, numbers 4036 and 4049, were modified in 1952 by having their coal capacity increased by means of extensions to the upper sides of their coal bunkers. Photographs show that more locomotives were later similarly modified. It does not appear as if these locomotives were ever officially reclassified to identify them as mainline locomotives, although they are referred to as Class GEAM in an annotation in the South African Railways and Harbours Locomotive Diagram Book. The post-modification coal capacity is not specified in the documentation.

In the Western Cape, wheatland fires caused by locomotives were a huge problem for farmers as well as for the SAR who had to pay out the claims. In the late 1960s Johannes Barnard, the assistant locomotive superintendent at Cape Town, used two locomotives to experiment with spark-extinguishing equipment, a Class GEA and a Class 19C. The spark extinguishers were mounted on the chimneys and consisted of two long tubes to extend the exhaust horizontally. The tubes had spray pipes around the vertical outlet at the end to drench any sparks that may have survived the journey along the tubes. In the case of Class GEA no. 4009 the tubes fed the exhaust forward to the outlet above the front end of the Garratt’s water bunker, which led to the engine being nicknamed Renoster (rhinoceros). The experiments were not successful.

Service

South African Railways

The locomotives were designed for goods traffic on light 60 pounds per yard (30 kilograms per metre) rail on branch lines. Some teething troubles were experienced when they were first placed in service, but these were solved and they proved themselves as fine performers. They started their service lives working goods traffic on the lines from Johannesburg to Zeerust in the Western Transvaal.

In the Cape Province, they worked from Voorbaai to Oudtshoorn across the Montagu Pass and in the opposite direction to Riversdale. Some were later transferred to Natal to work on the North Coast line, based at Stanger and Empangeni, and on the Eshowe and Nkwalini branches. They also worked on the Franklin branch and the Overberg line from Cape Town across Sir Lowry's Pass to Caledon. The Class GEA was withdrawn from service by 1976.

Royal visit, 1947

Princesses Margaret and Elizabeth on the footplate of no. 4024

During 1947, King George VI, accompanied by Queen Elizabeth and the Princesses Elizabeth and Margaret, visited the British territories in Southern Africa. The Royal Visit began in South Africa in February. Transport during the Royal Visit was aboard the Royal Train of the SAR, most of which later became the White Train for use by the Governor General of South Africa during the remaining years of the Union era and until the mid-1970s by the State President in the Republican era. During the Royal Visit, only selected British-built locomotives were used as motive power for the Royal Train. One of these was Class GEA no. 4024.

Industrial

Six Class GEA locomotives were sold into industrial service.

• No. 4003 went to Dunns Locomotive Works in the Witbank area.
• No. 4020 went to Dunns Locomotive Works and was initially used at Enyati Colliery and later at Vryheid Coronation Colliery.
• No. 4023 went to Vryheid Coronation Colliery as no. 6.
• No. 4024 went to Dunns Locomotive Works, for hire in the Witbank area.
• No. 4027 went to Dunns Locomotive Works for use at Enyati Colliery.
• No. 4031 went to Vryheid Coronation Colliery as no. 5.

Preservation

Of the Class Gea, several survived into preservation. By 2018

+ 4003 Owned (Transnet Heritage Foundation) currently stored at Witbank Locomotive Depot, awaiting Disposal either scrap or preservation. South Africa

+ 4022 Owned (Transnet Heritage Foundation) currently stored at Millsite Locomotive Depot awaiting Disposal either scrap or preservation. South Africa

+ 4023 Owned (Transnet Heritage Foundation) currently on display at the Outiniqua Transport Museum and selected as THF representative of the class for the National Heritage Collection. South Africa

Illustration

• 
  No. 4027 with an unmodified coal bunker, c. 1950
• 
  No. 4023 taking water at Camfer on the Montagu Pass, 2002
• 
  No. 4023 Peacock being fired up, Voorbaai, 30 May 2005
• 
  No. 4023, Outeniqua Transport Museum, 15 April 2013