Isotopes of plutonium

Actinides and fission products by half-life
Actinides by decay chain				Half-life range (a)	Fission products of 235U by yield
4n	4n + 1	4n + 2	4n + 3		4.5–7%	0.04–1.25%	<0.001%
228Ra№				4–6 a		155Euþ
244Cmƒ	241Puƒ	250Cf	227Ac№	10–29 a	90Sr	85Kr	113mCdþ
232Uƒ		238Puƒ	243Cmƒ	29–97 a	137Cs	151Smþ	121mSn
248Bk	249Cfƒ	242mAmƒ		141–351 a	No fission products have a half-life in the range of 100 a–210 ka ...
	241Amƒ		251Cfƒ	430–900 a
		226Ra№	247Bk	1.3–1.6 ka
240Pu	229Th	246Cmƒ	243Amƒ	4.7–7.4 ka
	245Cmƒ	250Cm		8.3–8.5 ka
			239Puƒ	24.1 ka
		230Th№	231Pa№	32–76 ka
236Npƒ	233Uƒ	234U№		150–250 ka	99Tc₡	126Sn
248Cm		242Pu		327–375 ka		79Se₡
				1.53 Ma	93Zr
	237Npƒ			2.1–6.5 Ma	135Cs₡	107Pd
236U			247Cmƒ	15–24 Ma		129I₡
244Pu				80 Ma	... nor beyond 15.7 Ma
232Th№		238U№	235Uƒ№	0.7–14.1 Ga
₡,  has thermal neutron capture cross section in the range of 8–50 barns ƒ,  fissile №,  primarily a naturally occurring radioactive material (NORM) þ,  neutron poison (thermal neutron capture cross section greater than 3k barns)

Plutonium (Pu) has no stable isotopes. A standard atomic mass cannot be given.

• Plutonium-238 has a half-life of 87.74 years and emits alpha particles. Pure Pu-238 for radioisotope thermoelectric generators which power some spacecraft is produced by neutron capture on neptunium-237 but plutonium from spent nuclear fuel can contain as much as a few percent of Pu-238, from either ²³⁷Np, alpha decay of ²⁴²Cm, or (n,2n) reactions.
• Plutonium-239 is the most important isotope of plutonium, with a half-life of 24,100 years. Pu-239 and Pu-241 are fissile, meaning that the nuclei of its atoms can break apart by being bombarded by slow moving thermal neutrons, releasing energy, gamma radiation and more neutrons. It can therefore sustain a nuclear chain reaction, leading to applications in nuclear weapons and nuclear reactors. Pu-239 is synthesized by irradiating uranium-238 with neutrons in a nuclear reactor, then recovered via nuclear reprocessing of the fuel. Further neutron capture produces successively heavier isotopes.
• Plutonium-240 has a high rate of spontaneous fission, raising the background neutron radiation of plutonium containing it. Plutonium is graded by proportion of Pu-240: weapons grade (< 7%), fuel grade (7–19%) and reactor grade (> 19%). Lower grades are less suited for nuclear weapons and thermal reactors but can fuel fast reactors. Pu-240 is not fissile, but is fertile material like U-238.
• Plutonium-241 is fissile, but also beta decays with a halflife of 14 years to americium-241.
• Plutonium-242 is not fissile, not very fertile (requiring 3 more neutron captures to become fissile), has a low neutron capture cross section, and a longer halflife than any of the lighter isotopes.
• Plutonium-244 is the most stable isotope of plutonium, with a half-life of about 80 million years, long enough to be found in trace quantities in nature. It is not significantly produced in nuclear reactors because Pu-243 has a short halflife, but some is produced in nuclear explosions.

Decay modes

Twenty plutonium radioisotopes have been characterized. The most stable are Pu-244, with a half-life of 80.8 million years, Pu-242, with a half-life of 373,300 years, and Pu-239, with a half-life of 24,110 years. All of the remaining radioactive isotopes have half-lives that are less than 7,000 years. This element also has eight meta states, though none are very stable (all have half-lives less than one second).

The isotopes of plutonium range in atomic weight from 228.0387 u (Pu-228) to 247.074 u (Pu-247). The primary decay modes before the most stable isotope, Pu-244, are spontaneous fission and alpha emission; the primary mode after is beta emission. The primary decay products before Pu-244 are uranium and neptunium isotopes (neglecting the wide range of daughter nuclei created by fission processes), and the primary products after are americium isotopes.

Production and uses

A pellet of plutonium-238, glowing under its own light, used for radioisotope thermoelectric generators.

Transmutation flow between ²³⁸Pu and ²⁴⁴Cm in LWR.
Transmutation speed not shown and varies greatly by nuclide.
²⁴⁵Cm–²⁴⁸Cm are long-lived with negligible decay.

Pu-239, a fissile isotope which is the second most used nuclear fuel in nuclear reactors after U-235, and the most used fuel in the fission portion of nuclear weapons, is produced from U-238 by neutron capture followed by two beta decays.

Pu-240, Pu-241, Pu-242 are produced by further neutron capture. The odd-mass isotopes Pu-239 and Pu-241 have about a 3/4 chance of undergoing fission on capture of a thermal neutron and about a 1/4 chance of retaining the neutron and becoming the following isotope. The even-mass isotopes are fertile material but not fissile and also have a lower overall probability (cross section) of neutron capture; therefore, they tend to accumulate in nuclear fuel used in a thermal reactor, the design of all nuclear power plants today. In plutonium that has been used a second time in thermal reactors in MOX fuel, Pu-240 may even be the most common isotope. All plutonium isotopes and other actinides, however, are fissionable with fast neutrons. Pu-240 does have a moderate thermal neutron absorption cross section, so that Pu-241 production in a thermal reactor becomes a significant fraction as large as Pu-239 production.

Pu-241 has a halflife of 14 years, and has slightly higher thermal neutron cross sections than Pu-239 for both fission and absorption. While nuclear fuel is being used in a reactor, a Pu-241 nucleus is much more likely to fission or to capture a neutron than to decay. Pu-241 accounts for a significant proportion of fissions in thermal reactor fuel that has been used for some time. However, in spent nuclear fuel that does not quickly undergo nuclear reprocessing but instead is cooled for years after use, much or most of the Pu-241 will beta decay to americium-241, one of the minor actinides, a strong alpha emitter, and difficult to use in thermal reactors.

Pu-242 has a particularly low cross section for thermal neutron capture; and it takes four neutron absorptions to become another fissile isotope (either curium-245 or Pu-241) and fission. Even then, there is a chance either of those two fissile isotopes will fail to fission but instead absorb the fourth neutron, becoming curium-246 (on the way to even heavier actinides like californium, which is a neutron emitter by spontaneous fission and difficult to handle) or becoming Pu-242 again; so the mean number of neutrons absorbed before fission is even higher than 4. Therefore Pu-242 is particularly unsuited to recycling in a thermal reactor and would be better used in a fast reactor where it can be fissioned directly. However, Pu-242's low cross section means that relatively little of it will be transmuted during one cycle in a thermal reactor. Pu-242's halflife is about 15 times as long as Pu-239's halflife; therefore it is 1/15 as radioactive and not one of the larger contributors to nuclear waste radioactivity. ²⁴²Pu's gamma ray emissions are also weaker than those of the other isotopes.

Pu-243 has a halflife of only 5 hours, beta decaying to americium-243. Because Pu-243 has little opportunity to capture an additional neutron before decay, the nuclear fuel cycle does not produce the extremely long-lived Pu-244 in significant quantity.

Pu-238 is not normally produced in as large quantity by the nuclear fuel cycle, but some is produced from neptunium-237 by neutron capture (this reaction can also be used with purified neptunium to produce Pu-238 relatively free of other plutonium isotopes for use in radioisotope thermoelectric generators), by the (n,2n) reaction of fast neutrons on Pu-239, or by alpha decay of curium-242 which is produced by neutron capture from Am-241. It has significant thermal neutron cross section for fission, but is more likely to capture a neutron and become Pu-239.

Manufacture

Pu-240, Pu-241 and Pu-242

The activation cross section for ²³⁹Pu is 270 barns, while the fission cross section is 747 barns for thermal neutrons. The higher plutonium isotopes are created when the uranium fuel is used for a long time. It is the case that for high burnup used fuel that the concentrations of the higher plutonium isotopes will be higher than the low burnup fuel which is reprocessed to obtain weapons grade plutonium.

The formation of ²⁴⁰Pu, ²⁴¹Pu and ²⁴²Pu from ²³⁸U

Isotope	Thermal neutron cross section		decay mode	halflife
	Capture	Fission
238U	2.7		α	4.47 x 109 years
239U			β	23 minutes
239Np			β	2.36 days
239Pu	270		α	24,110 years
240Pu	289		α	6,564 years
241Pu	362		β	14.35 years
242Pu	18.8		α	373,300 years

Pu-239

Main article: Plutonium-239

Plutonium-239 is one of the three fissile materials used for the production of nuclear weapons and in some nuclear reactors as a source of energy. The other fissile materials are uranium-235 and uranium-233. Plutonium-239 is virtually nonexistent in nature. It is made by bombarding uranium-238 with neutrons in a nuclear reactor. Uranium-238 is present in quantity in most reactor fuel; hence plutonium-239 is continuously made in these reactors. Since plutonium-239 can itself be split by neutrons to release energy, plutonium-239 provides a portion of the energy generation in a nuclear reactor.

A ring of weapons-grade electrorefined plutonium, with 99.96% purity. This 5.3 kg ring is enough plutonium for use in an efficient nuclear weapon. The ring shape is needed to depart from a spherical shape and avoid criticality.

The formation of ²³⁹Pu from ²³⁸U

Element	Isotope	Thermal neutron capture cross section (barn)	Thermal neutron fission Cross section (barn)	decay mode	halflife
U	238	2.68	5·10-6	α	4.47 x 109 years
U	239	22	15	β	23 minutes
Np	239	30	1	β	2.36 days
Pu	239	271	750	α	24,110 years

Pu-238

Main article: Plutonium-238

There are small amounts of Pu-238 in the plutonium of usual plutonium-producing reactors. However, isotopic separation would be quite expensive compared to another method: when a U-235 atom captures a neutron, it is converted to an excited state of U-236. Some of the excited U-236 nuclei undergo fission, but some decay to the ground state of U-236 by emitting gamma radiation. Further neutron capture creates U-237 which has a half-life of 7 days and thus quickly decays to Np-237. Since nearly all neptunium is produced in this way or consists of isotopes which decay quickly, one gets nearly pure Np-237 by chemical separation of neptunium. After this chemical separation, Np-237 is again irradiated by reactor neutrons to be converted to Np-238 which decays to Pu-238 with a half-life of 2 days.

The formation of ²³⁸Pu from ²³⁵U

Element	Isotope	Thermal neutron cross section	decay mode	halflife
U	235	99	α	703,800,000 years
U	236	5.3	α	23,420,000 years
U	237	-	β	6.75 days
Np	237	165 (capture)	α	2,144,000 years
Np	238	-	β	2.11 days
Pu	238	-	α	87.7 years

Pu-240 as obstacle to nuclear weapons

Pu-240 undergoes spontaneous fission as a secondary decay mode at a small but significant rate. The presence of Pu-240 limits the plutonium's nuclear bomb potential because the neutron flux from spontaneous fission, initiates the chain reaction prematurely and reduces the bomb's power by exploding the core before full implosion is reached. Plutonium consisting of more than about 90% Pu-239 is called weapons-grade plutonium; plutonium from spent nuclear fuel from commercial power reactors generally contains at least 20% Pu-240 and is called reactor-grade plutonium. However, modern nuclear weapons use fusion boosting which mitigates the predetonation problem; if the pit can generate a nuclear weapon yield of even a fraction of a kiloton, which is enough to start deuterium-tritium fusion, the resulting burst of neutrons will fission enough plutonium to ensure a yield of tens of kilotons.

Pu-240 contamination is the reason plutonium weapons must use the implosion method. Theoretically, pure Pu-239 could be used in a gun-type nuclear weapon, but achieving this level of purity is prohibitively difficult. Pu-240 contamination has proven a mixed blessing to nuclear weapons design. While it created delays and headaches during the Manhattan Project because of the need to develop implosion technology, those very same difficulties are currently a barrier to nuclear proliferation. Implosion devices are also inherently more efficient and less prone toward accidental detonation than are gun-type weapons.

Table

nuclide symbol	Z(p)	N(n)	isotopic mass (u)	half-life	decay mode(s)	daughter isotopes	nuclear spin	representative isotopic composition (mole fraction)	range of natural variation (mole fraction)
	excitation energy
228Pu	94	134	228.03874(3)	1.1(+20-5) s	α (99.9%)	224U	0+
					β+ (.1%)	228Np
229Pu	94	135	229.04015(6)	120(50) s	α	225U	3/2+#
230Pu	94	136	230.039650(16)	1.70(17) min	α	226U	0+
					β+ (rare)	230Np
231Pu	94	137	231.041101(28)	8.6(5) min	β+	231Np	3/2+#
					α (rare)	227U
232Pu	94	138	232.041187(19)	33.7(5) min	EC (89%)	232Np	0+
					α (11%)	228U
233Pu	94	139	233.04300(5)	20.9(4) min	β+ (99.88%)	233Np	5/2+#
					α (.12%)	229U
234Pu	94	140	234.043317(7)	8.8(1) h	EC (94%)	234Np	0+
					α (6%)	230U
235Pu	94	141	235.045286(22)	25.3(5) min	β+ (99.99%)	235Np	(5/2+)
					α (.0027%)	231U
236Pu	94	142	236.0460580(24)	2.858(8) a	α	232U	0+
					SF (1.37E-7%)	(various)
					CD (2E-12%)	28Mg, 208Pb
					β+β+ (rare)	236U
237Pu	94	143	237.0484097(24)	45.2(1) d	EC	237Np	7/2-
					α (.0042%)	233U
237m1Pu	145.544(10) keV			180(20) ms	IT	237Pu	1/2+
237m2Pu	2900(250) keV			1.1(1) µs
238Pu	94	144	238.0495599(20)	87.7(1) a	α	234U	0+
					SF (1.9E-7%)	(various)
					CD (1.4E-14%)	32Si, 206Hg
					CD (6E-15%)	28Mg, 30Mg, 180Yb
239Pu	94	145	239.0521634(20)	2.411(3)E+4 a	α	235mU	1/2+
					SF (3.1E-10%)	(various)
239m1Pu	391.584(3) keV			193(4) ns			7/2-
239m2Pu	3100(200) keV			7.5(10) µs			(5/2+)
240Pu	94	146	240.0538135(20)	6,561(7) a	α	236U	0+
					SF (5.7E-6%)	(various)
					CD (1.3E-13%)	206Hg, 34Si
241Pu	94	147	241.0568515(20)	14.290(6) a	β- (99.99%)	241Am	5/2+
					α (.00245%)	237U
					SF (2.4E-14%)	(various)
241m1Pu	161.6(1) keV			0.88(5) µs			1/2+
241m2Pu	2200(200) keV			21(3) µs
242Pu	94	148	242.0587426(20)	3.75(2)E+5 a	α	238U	0+
					SF (5.5E-4%)	(various)
243Pu	94	149	243.062003(3)	4.956(3) h	β-	243Am	7/2+
243mPu	383.6(4) keV			330(30) ns			(1/2+)
244Pu	94	150	244.064204(5)	8.00(9)E+7 a	α (99.88%)	240U	0+
					SF (.123%)	(various)
					β-β- (7.3E-9%)	244Cm
245Pu	94	151	245.067747(15)	10.5(1) h	β-	245Am	(9/2-)
246Pu	94	152	246.070205(16)	10.84(2) d	β-	246mAm	0+
247Pu	94	153	247.07407(32)#	2.27(23) d	β-	247Am	1/2+#

Notes

• Values marked # are not purely derived from experimental data, but at least partly from systematic trends. Spins with weak assignment arguments are enclosed in parentheses.
• Uncertainties are given in concise form in parentheses after the corresponding last digits. Uncertainty values denote one standard deviation, except isotopic composition and standard atomic mass from IUPAC which use expanded uncertainties.

References

• Isotope masses from:
  • G. Audi, A. H. Wapstra, C. Thibault, J. Blachot and O. Bersillon (2003). "The NUBASE evaluation of nuclear and decay properties" (PDF). Nuclear Physics A. 729: 3–128. doi:10.1016/j.nuclphysa.2003.11.001.{{cite journal}}: CS1 maint: multiple names: authors list (link)
• Isotopic compositions and standard atomic masses from:
  • J. R. de Laeter, J. K. Böhlke, P. De Bièvre, H. Hidaka, H. S. Peiser, K. J. R. Rosman and P. D. P. Taylor (2003). "Atomic weights of the elements. Review 2000 (IUPAC Technical Report)". Pure and Applied Chemistry. 75 (6): 683–800. doi:10.1351/pac200375060683.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  • M. E. Wieser (2006). "Atomic weights of the elements 2005 (IUPAC Technical Report)". Pure and Applied Chemistry. 78 (11): 2051–2066. doi:10.1351/pac200678112051. {{cite journal}}: Unknown parameter |laysummary= ignored (help)
• Half-life, spin, and isomer data selected from the following sources. See editing notes on this article's talk page.
  • G. Audi, A. H. Wapstra, C. Thibault, J. Blachot and O. Bersillon (2003). "The NUBASE evaluation of nuclear and decay properties" (PDF). Nuclear Physics A. 729: 3–128. doi:10.1016/j.nuclphysa.2003.11.001.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  • National Nuclear Data Center. "NuDat 2.1 database". Brookhaven National Laboratory. Retrieved September 2005. {{cite web}}: Check date values in: |accessdate= (help)
  • N. E. Holden (2004). "Table of the Isotopes". In D. R. Lide (ed.). CRC Handbook of Chemistry and Physics (85th ed.). CRC Press. Section 11. ISBN 978-0849304859. {{cite book}}: Unknown parameter |nopp= ignored (|no-pp= suggested) (help)