Mazda RX-7

Mazda RX-7
Overview
Manufacturer	Mazda
Production	1978–2002 811 634 produced
Assembly	Hiroshima, Japan
Body and chassis
Class	Sports car
Body style	2-door sports coupe
Layout	FR layout
Chronology
Predecessor	Mazda RX-3
Successor	Mazda RX-8

The Mazda RX-7 (also called the Ẽfini RX-7) is a sports car produced by the Japanese automaker Mazda from 1978 to 2002. The original RX-7 competed in the affordable sports car segment with the likes of the Nissan Fairlady Z. The styling was inspired by the Lotus Elan 2+2. It featured a unique twin-rotor Wankel rotary engine and a sporty front-midship, rear-wheel drive layout, making it well balanced and appropriate for racing. The RX-7 was a direct replacement for the RX-3 (both were sold in Japan as the Savanna) and subsequently replaced all other Mazda rotary cars with the exception of the Cosmo.

The original RX-7 was a true sports coupé design, as opposed to a sports car like the Triumph TR6 or a sedan with sporting intentions. The compact and light-weight Wankel engine, also known as a rotary engine is situated slightly behind the front axle. It was offered in America as a two-seat coupé, with four seats being optional in Japan, Australia, and other parts of the world.

The RX-7 made Car and Driver magazine's Ten Best list five times. In total, 811,634 RX-7s were produced.

First generation (SA/FB)

SA/FB
Overview
Production	1978–1984
Powertrain
Engine	12A 13B-DEI (GSL-SE)

1983 Mazda RX-7

• Series 1 (1979–1980) is commonly referred to as the "SA22C" from the first alphanumerics of the vehicle identification number- although RX-7 tech site Rotorhead.ca points out that the chassis code used by Mazda was 'P642'. This series of RX-7 had exposed steel bumpers and a high-mounted license plate located in an indented part of the rear of the car, famously criticized by Werner Buhrer of Road & Track magazine as a "Baroque depression." Buhrer published his own suggested design for this part of the car.
• Series 2 (1981–1983) had smoothly integrated plastic-covered bumpers, wide black rubber body side moldings, wraparound taillights and updated engine control components. The GSL package provided optional 4-wheel disc brakes and clutch-type rear limited slip differential (LSD). Known as the "FB" in North America after the US Department of Transportation mandated 17 digit Vehicle Identification Number changeover. Elsewhere in the world, the 1981-1985 RX-7 is technically still an 'SA22C' among enthusiasts. The license-plate surround looks much like Buhrer's "Styling Impressions."
• Series 3 (1984–1985) featured an updated lower front fascia and different instrument cluster (the S3 RX-7 is the only rotary-engined car to not have a centrally mounted tachometer). GSL package was continued into this series, but Mazda introduced the GSL-SE sub-model. The GSL-SE had a fuel injected 1.3 L 13B RE-EGI engine producing 135 hp (101 kW) and 135 lb-ft. GSL-SEs had much the same options as the GSL (clutch-type rear LSD and rear disc brakes), but the brake rotors were larger, allowing Mazda to use the more common lug nuts (versus bolts), and a new bolt pattern of 4x114.3 (4x4.5"). Also, they had upgraded suspension with stiffer springs and shocks, and a new, heavy duty oil cooler.

The 1984 RX-7 G has an estimated 29 highway miles per gallon (12.33 kilometres per litre) /19 estimated city miles per gallon (8.08 km/l). According to Mazda, its rotary engine, licensed by NSU-Wankel allowed the RX-7 G to accelerate from 0 to 50 (80 km/h) in 6.3 seconds. Kelley Blue Book, in its January-February 1984 issue, noted that a 1981 RX-7 G retained 93.4% of its original sticker price.

The handling and acceleration of the car were noted to be of a high caliber for its day. This generation RX-7 had "live axle" 4-link rear suspension with Watt's linkage, a 50/50 weight ratio, and weighed under 2600 lb (1180 kg). It was the lightest generation of RX-7 ever produced. 12A-powered models accelerated from 0–60 mph in 9.2 s, and turned 0.779 lateral Gs on a skidpad. The 12A engine produced 100 hp (75 kW) at 6000 rpm, allowing the car to reach speeds of over 120 mph (190 km/h). Because of the smoothness inherent in the Wankel rotary engine, little vibration or harshness was experienced at high rpm, so a buzzer was fitted to the tachometer to warn the driver when the 7000 rpm redline was approaching.

The 12A engine has a long thin shaped combustion chamber, there is a large surface area in relation to its volume. So combustion is cool, giving few oxides of nitrogen. However, the combustion is also incomplete, so there are large amounts of partly burned hydrocarbons and carbon monoxide. The exhaust is hot enough for combustion of these to continue into the exhaust. An engine driven pump supplies air into the exhaust to complete the burn of these chemicals. This is done in the "thermal reactor", chamber where the exhaust manifold would normally be on a conventional engine. Under certain conditions the pump injects air into the thermal reactor and at other times air is pumped through injectors into the exhaust ports. This fresh air is needed for more efficient and cleaner burning of the air/fuel mixture.

This system is extremely conducive to creating backfires because the combustion continues down the exhaust system. Further modification of the engine can yield even more impressive backfires. For example, adding a header system or disconnecting the air pump allows the unburnt fuels to build up therefore strengthening the backfires. It is not uncommon to witness unmodified RX-7's produce flaming backfires from the exhaust tips.

Options and models varied from country to country. The gauge layout and interior styling in the Series 3 was only changed for North American versions. Additionally, North America was the only market to have offered the first generation RX-7 with the fuel injected 13B. A turbocharged (but non-intercooled) 12A engine was available for the top-end model of Series 3 in Japan.

Sales were strong, with a total of 474,565 first generation cars produced; 377,878 were sold in the United States alone. In 2004, Sports Car International named this car #7 on its list of Top Sports Cars of the 1970s. In 1983, the RX-7 would appear on Car and Driver magazine's Ten Best list for the first time.

Second generation (FC)

FC
Overview
Production	1985–1991
Powertrain
Engine	1.3L 146 hp R0 1.3L 182 hp R0
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	95.7 in
Length	1986-88: 168.9 in 1989-1991: 169.9 in
Width	66.5 in
Height	49.8 in

• Series 4 (1986–1988) was available with a naturally aspirated, fuel-injected 13B-VDEI producing 146 hp (108 kW). An optional turbocharged model, known as the Turbo II, had 182 hp (135 kW).
• Series 5 (1989–1992) featured updated styling and better engine management, as well as lighter rotors and a higher compression ratio, 9.7:1 for the naturally aspirated model, and 9.0:1 for the turbo model. The Turbo II moniker was dropped, and the turbocharged model was simply dubbed Turbo. The naturally aspirated Series 5 FC made 160 hp (119 kW), while the Series 5 Turbo made 200 hp (147 kW).

The second generation RX-7 ("FC", VIN begins JM1FC3 or JMZFC1), still known as the "Savanna RX-7" in Japan, featured a complete restyling reminiscent of the Porsche 928. Mazda's stylists, lead by Chief Project Engineer Akio Uchiyama, actually focused more on the Porsche 944 for their inspiration in designing the FC because the new car was being styled primarily for the American market, where the majority of first generation RX-7's had been sold. This strategy was chosen after Uchiyama and others on the design team spent time in the United States studying owners of earlier RX-7's and other sports cars popular in the American market. The Porsche 944 was selling particularly well at the time and provided clues as to what sports-car enthusiasts might find compelling in future RX-7 styling and equipment. While the SA22/FB was a purer sports car, the FC tended toward the softer sport-tourer trends of its day. Handling was much improved, with less of the oversteer tendencies of the FB. Steering was more precise, with rack and pinion steering replacing the old recirculating ball steering of the FB. Disc brakes also became standard, with some models (S4: GXL, GTU, Turbo II, Convertible; S5: GTUs, Turbo, Convertible) offering four-piston front brakes. The revised independent rear suspension incorporated special toe control hubs which were capable of introducing a limited degree of passive rear steering under cornering loads. The rear seats were optional in some models of the FC RX-7, but are not commonly found.

Though about 80 lb heavier and more isolated than its predecessor, the FC continued to win accolades from the press. The FC RX-7 was Motor Trend's Import Car of the Year for 1986, and the Turbo II was on Car and Driver magazine's Ten Best list for a second time in 1987. Many car drivers still favor the FC more than the FD because of its high tuning potential and upfront affordability.

In 1988, a convertible version started production in atmospheric and turbocharged form, proving an instant success. This sleek, clean-lined model featured a cabriolet design and was introduced to the American market in splashy television advertisements featuring Hollywood actor James Garner, who was known to race cars in his spare time. Several leading car magazines at the time also selected the convertible as the best ragtop available on the market, and it was the star of auto shows around the globe. The convertible's well orchestrated introduction caused a notable public sensation and heavy demand for these vehicles. Dealers took full advantage of the situation, charging up to $5,000 above Mazda's suggested retail selling price with buyers happy to pay the premium. It is believed Mazda exported approximately five thousand convertibles to the United States in 1988 and fewer in each of the next three model years, although it is difficult to confirm these figures, as Mazda USA did not keep RX-7 import records by model type. Despite production ceasing in October 1991, Mazda built a limited run of 500 convertibles for 1992 as "specials" for the domestic market only. In Japan, the United Kingdom, and other regions outside the US, a turbocharged version of the convertible was available. Being former "dream cars", it now appears a nascent collectors market is developing for these classic, semi-exotic sports cars.

In the Japanese market, only the turbo engine was available; the atmospheric version was allowed only as an export. This can be attributed to insurance companies penalising turbo cars (thus restricting potential sales). This emphasis on containing horsepower and placating insurance companies to make RX-7's more affordable seems ironic in retrospect. Shortly after the discontinuance of the second generation RX-7's in 1991, an outright horsepower "arms race" broke out between sports car manufacturers, with higher and higher levels of horsepower required to meet buyer demands.

Overall, the second generation was the most successful for Mazda sales wise, with 86,000 units sold in the US alone in 1986, its first model year. The FC model is believed to have achieved its peak in sales in 1988.

Third generation (FD)

FD
Overview
Production	1991–2002
Powertrain
Engine	1.3L 255 hp R0
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	95.5 in
Length	168.5 in
Width	68.9 in
Height	48.4 in

Mazda RX-7 R1 FD3S (Brilliant Black)

Mazda 13B-REW Engine (Modified)

THE MOST AMAZING CAR EVER FUCKING BUILT EATS EVERY CAR OFF THE LINE NIGGAS

• Series 6 (1992–1995) was exported throughout the world and had the highest sales. In Japan, Mazda sold the RX-7 through its Efini brand as the Efini RX-7. Only the 1993–1995 model years were sold in the U.S. and Canada. Series 6 came with 230hp and 200ft-lbs.
• Series 7 (1996–1998) included minor changes to the car. Updates included a simplified vacuum routing manifold and a 16-bit ECU allowing for increased boost which netted an extra 10 hp. In Japan, the Series 7 RX-7 was marketed under the Mazda brand name. The Series 7 was also sold in Australia, New Zealand and the UK. Series 7 RX-7s were produced only in right-hand-drive configuration.
• Series 8 (January 1999– August 2002) was the final series, and was only available in the Japanese market. More efficient turbochargers were installed, while improved intercooling and radiator cooling was made possible by a revised frontal area. The seats, steering wheel, and front and rear lights were all changed. The rear wing was modified and gained adjustability. The top-of-the-line "Type RS" came equipped with a Bilstein suspension and 17" wheels as standard equipment, and reduced weight to 1280 kg. Power was officially claimed as 250 ps (276 hp, 208 kW) (with 330 N·m (243 ft·lbf) of torque) as per the maximum Japanese limit, though realistic power was more likely 220–230 kW (290–308 hp). The Type RZ version included all the features of the Type RS, but at a lighter weight (at 1270 kg). It also featured custom gun-metal colored BBS wheels and a custom red racing themed interior. Further upgrades included a new 16-bit ECU and ABS system upgrades. The improved ABS system worked by braking differently on each wheel, allowing the car better turning during braking. The effective result made for safer driving for the average buyer. Easily the most collectible of all the RX-7s was the last 1,500 run-out specials. Dubbed the "Spirit R", they combined all the "extra" features Mazda had used on previous limited-run specials and all sold within days of being announced. They still command amazing prices on the Japanese used car scene years later.

- There are three kinds of "Spirit R": the "Type A", "Type B", and "Type C". The "Type A", which accounts for 500 of the 1,500 "Spirit" models produced, has a 5-speed manual transmission, and is said to have the best performance of the three models. The "Type B" has a 2+2 seat configuration and also sports a 5-speed manual transmission, 500 of which were also made. "The Spirit C" is also a 2+2, but has a 3-speed automatic transmission and 500 were made.

There is also a "Touring Model" which includes a sun roof, and Bose stereo system. Compared to the R1 and R2 which both don't have a moon roof, and they have an extra front oil cooler in the front bumper, and other race modification equipment

The third and final generation of the RX-7, FD (with FD3S for the JDM and JM1FD for the USA VIN), was an outright, no-compromise sports car by Japanese standards. It featured an aerodynamic, futuristic-looking body design (a testament to its near 11-year lifespan). The 13B-REW was the first-ever mass-produced sequential twin-turbocharger system to export from Japan, boosting power to 255 hp (190 kW) in 1993 and finally 280 DIN hp (276 hp, 208 kW, the Japanese manufacturers' gentlemen's agreement on engine power) by the time production ended in Japan in 2002.

The FD RX-7 was Motor Trend's Import\Domestic Car of the Year. When Playboy magazine first reviewed the FD RX-7 in 1993, they tested it in the same issue as the [then] new Dodge Viper. In that issue, Playboy declared the RX-7 to be the better of the two cars. It went on to win Playboy's Car of the Year for 1993. The FD RX-7 also made Car and Driver magazine's Ten Best list for 1993 through 1995, for every year in which it was sold state-side. June, 2007 Road&Track magazine proclaimed "The ace in Mazda's sleeve is the RX-7, a car once touted as the purest, most exhilarating sports car in the world.

The sequential twin turbocharged system was a very complex piece of engineering, developed with the aid of Hitachi and previously used on the domestic Cosmo series (JC Cosmo=90–95). The system was comprised of two small turbochargers, one to provide torque at low RPM. The 2nd unit was on standby until the upper half of the rpm range during full throttle acceleration. The first turbocharger provided 10 psi of boost from 1800 rpm, and the 2nd turbocharger was activated at 4000 rpm and also provided 10 psi (70 kPa). The changeover process was incredibly smooth, and provided linear acceleration and a very wide torque curve throughout the entire rev range.

Handling in the FD was regarded as world-class, and it is still regarded as being one of the finest handling and best balanced cars of all time. The continued use of the front-midship engine and drivetrain layout, combined with an 50:50 front-rear weight distribution ratio and low center of gravity made the FD a very competent car at the limits.

In North America, three models were offered; the "base", the touring, and the R models. The touring FD had a sunroof, leather seats, and a complex Bose Acoustic Wave system. The R (R1 in 1993 and R2 in 1994–95) models featured stiffer suspensions, an aerodynamics package, suede seats, and Z-rated tires.

Australia had a special high performance version of the RX-7 in 1995, dubbed the RX-7 SP. This model was developed as a homologated road-going version of the race car used in the 12hr endurance race held at Bathurst, New South Wales, beginning in 1991. An initial run of 25 were made, and later an extra 10 were built by Mazda due to demand. The RX-7 SP produced 204 kW (274 hp) and 357 N·m (263 ft·lbf) of torque, compared to 176 kW (236 hp) and 294 N·m (217 ft·lbf) on the standard version. Other changes included a race-inspired nose cone, race-proven rear wing, a 120 L fuel tank (as opposed to the 76 L tank in the standard car), a 4.3:1-ratio rear differential, 17 in diameter wheels, larger brake rotors and calipers. An improved intercooler, exhaust, and modified ECU were also included. Weight was reduced significantly with the aid of carbon fibre; a lightweight bonnet and seats were used to reduce weight to just 1218 kg (from 1310 kg). It was a serious road going race car that matched their rival Porsche 968CSRS for the final year Mazda officially entered. The formula paid off when the RX-7SP won the title, giving Mazda the winning trophy for a fourth straight year. A later special version, the Bathurst R, was released in 2001.

A popular modification to the 3rd Gen RX-7 is the substitution of a 20B (2.0 litre) 3-rotor engine taken from the Eunos Cosmo in place of the stock 13B (1.3 litre) 2-rotor engine. Many aftermarket performance houses sell conversion kits with the 20B engine, such as Stillen and Pettit Racing. Such 3-rotor configurations typically produce 550 hp and a top speed of well over 200 mph. While critics claim that any 13B 2-rotor RX-7 can be highly tuned to achieve this level of performance, the difference is in daily drivability and reliability that makes the 20B conversion superior to the stock 13B motor at those high horsepower levels.

Third Generation RX-7 USA Sales Figures (1993-1995)

Year: 1993

Model	R1	BS	BS-P	TR-A	TR-P
Competition Yellow Mica	350	0	0	0	0
Vintage Red	1177	151	731	430	1775
Brilliant Black	138	109	418	244	954
Silver Stone Metallic	1	58	266	187	824
Montego Blue Metallic	0	72	319	258	1015

Year:.... 1994

Model	R2	BS-A	BS-P	PE-P	TR-A	TR-P
Chaste White	0	26	54	203	63	276
Perlie White	0	0	0	1	0	0
Vintage Red	156	14	60	159	59	248
Brilliant Black	156	16	48	150	42	235
Silver Stone Metallic	83	4	22	74	26	118
Montego Blue Metallic	0	50	116	323	105	516

Year:.... 1995

Model	R2	Base (auto)	Base (manual)	PEP (auto)	PEP (manual)
Chaste White	0	2	13	2	33
Vintage Red	23	7	19	5	69
Brilliant Black	18	5	21	9	62
Silver Stone Metallic	16	2	6	4	34
Montego Blue Metallic	0	10	23	16	101

Grand Total:..13,879

Motorsport

Racing versions of the first-generation RX-7 were entered at the prestigious 24 hours of Le Mans endurance race. The first outing for the car, equipped with a 13B engine, failed by less than one second to qualify in 1979. The next year, a 12A-engine car not only qualified, it placed 21st overall. That same car did not finish in 1981, along with two more 13B cars. Those two cars were back for 1982, with one 14th place finish and another DNF. The RX-7 Le Mans effort was replaced by the 717C prototype for 1983. In 1991, Mazda became the first (and so far, only) Japanese manufacturer to win the 24 hours of Le Mans. The car was a 4-rotor prototype class car, the 787B. The FIA outlawed rotary engines shortly after this win.

Mazda began racing RX-7s in the IMSA GTU series in 1979. That first year, RX-7s placed first and second at the 24 Hours of Daytona, and claimed the GTU series championship. The car continued winning, claiming the GTU championship seven years in a row. The RX-7 took the GTO championship ten years in a row from 1982. The RX-7 has won more IMSA races than any other car model.

The RX-7 also fared well at the Spa 24 Hours race. Three Savanna/RX-7s were entered in 1981 by Tom Walkinshaw Racing. After hours of battling with several BMW 530i and Ford Capri, the RX-7 driven by Pierre Dieudonné and Tom Walkinshaw won the event. Mazda had turned the tables on BMW, who had beaten Mazda's Familia Rotary to the podium eleven years earlier at the same event. TWR's prepared RX-7s also won the British Touring Car Championship in 1980 and 1981, driven by Win Percy.

Canadian/Australian touring car driver Allan Moffat was instrumental in bringing Mazda into the Australian touring car scene. Over a four year span beginning in 1981, Moffat took the Mazda RX-7 to victory in the 1983 Australian Touring Car Championship, as well as a trio of Bathurst 1000 podiums, in 1981 (3rd with Derek Bell), 1983 (second with Yoshima Katayama) and 1984 (third with former motorcycle champion Gregg Hansford). Australia's adoption of international Group A regulations, combined with Mazda's reluctance to homologate a Group A RX-7, ended Mazda's active participation in the touring car series at the end of the 1984 season.

The RX-7 even made an appearance in the World Rally Championship. The car finished 11th on its debut at the RAC Rally in Wales in 1981. Group B received much of the focus for the first part of the 1980s, but Mazda did manage to place third at the 1985 Acropolis Rally, and the Familia 4WD claimed the victory at Swedish Rally in both 1987 and 1989.

The RX-7 is considered as a popular choice in import drag racing, during the late nineties toward 2004 Abel Ibarra raced a spaceframe FD which averaged no less than high 6 seconds passes, until he replaced it with a spaceframe RX-8, the FD was later to shipped and sold to an Australian.

The FC and FD is considered a popular choice for drifting contests, given the long wheelbase and an average of 450 bhp. Youichi Imamura won the D1 Grand Prix title in 2003 and Masao Suenaga narrowly lost his in 2005, both in FDs.

The RX-7 is a popular choice among autocross drivers,

In Japan, the RX-7 has always been a popular choice in domestic events, competing in Group 5 based Formula Silhouette to its modern day incarnation, the Super GT series from when the Japan Sport Sedan series would become the GT300 category which it had been competing in. Its patience would pay off as in 2006, RE Amemiya Racing Asparadrink FD3S won the GT300 class championship.

Notes

Recently, Mazda has revived the rotary engine in the form of the RX-8. It produces approximately 232 hp naturally aspirated, while the Japanese market version produces around 250 hp.

It's also been said by Automobile Magazine that a new generation of RX-7s will be returning in 2011.

Movies and TV

• The car appeared in the Japanese anime series, Initial D, driven by both the Takahashi brothers-Keisuke and Ryosuke, with Keisuke driving a yellow twin-turbo FD3S and Ryosuke driving a white FC3S-and the girl that likes Keisuke, Kyoko, who drives a black single turbo FD3S.
• A yellow FB is used in the Metal Heroes show Uchuu Keiji Shaider by Annie to patrol the streets.
• The FD was featured in several Need for Speed games as well as Japanese imported racing computer games. The RX-7 has made an appearance in every Gran Turismo game to date, which includes many types of the different generations, including specially tuned racing versions by the various 'shops' in 'Gran Turismo mode'.
• The RX-7 FD has also been featured in every film in the 'Fast and the Furious' franchise so far.
• The FD RX-7 is shown in "Office Space" in the parking lot of Initech.
• The FD RX-7 is featured in "Fast Getaway II". It is the center of a high-speed chase.
• The FC RX-7 is shown in "Don't be a Menace To South Central While Drinking Juice in the Hood"
• Strangely, the FC RX-7 is very often classified as a higher class(harder) car than the FD in video games.
• A highly modified RX-7 was fabricated by Veilside, one of Japan's largest automotive aftermarket companies, to show off its "Fortune" wide-body kit at the 2005 Tokyo Auto Salon. The car won the Grand Prix of show, soon after picture Car Coordinator Dennis McCarthy saw it and decided it should, repainted Sunset Orange Pearl, co-star in The Fast and the Furious: Tokyo Drift. Veilside also built three duplicates for the film while the Tokyo Drift shop built three more visual clones — including one destined for destruction using a Mazda RX-7 that appeared in both previous Fast and Furious films as its base. http://www.edmunds.com/insideline/do/Features/articleId=115635

Video Game Appearances

• Auto Modellista features all three generations of the RX-7, which can also be customized and driven.
• Chase HQ in stage 5, the villain (Eastern Bloc Spy) robs a red Mazda RX-7 FC.
• Driving Emotion Type-S features the FC and FD RX-7.
• D1 Grand Prix features the FC and FD models which can be customized and driven.
• Enthusia Professional Racing features all three generations of the RX-7.
• Forza Motorsport features both the FD and FC RX-7.
• Forza Motorsport 2 Features the FC and FD RX-7, but oddly enough not the SA or FB..
• Full Throttle (known as Top Speed outside Japan) was the first game to feature an FC3S in its 1987 release.
• Initial D Arcade Versions 1,2,3, and 4 features the FC and FD RX-7 which can be customized and driven.
• Juiced features the stock FD RX-7.
• Juiced 2 will feature a RX-7
• Gran Turismo features racing and stock versions of the FC and FD RX-7.
• Gran Turismo 2 features more racing and stock versions of the RX-7.
• Gran Turismo 3: A-Spec features more racing and stock versions of the RX-7 and also offers the LM version as a prize car.
• Gran Turismo 4 features more racing and stock versions of the RX-7. Some RX-7s are also available in the Used Car Shops. The LM version again makes an appearance with notable engine sound effects.
• Gran Turismo HD will feature the Veilside RX-7.
• Metropolis Street Racer, the precursor to Project Gotham Racing, featured an RX-7.
• The Need for Speed features the 1993 FD RX-7.
• Need for Speed: Underground features an FD RX-7 that can be unlocked and then driven and modified in the game.
• Need for Speed: Underground 2 features the RX-7 with more parts available.
• Need for Speed: Most Wanted features the RX-7.
• Need for Speed: Carbon features the RX-7. Kenji, a boss, drives one.
• Need for Speed: ProStreet will feature a RX-7.
• R:Racing Evolution features the FC and FD RX-7.
• Sega GT also features the last two generations of the RX-7.
• Sega GT 2002 and its Online incarnation feature all three generations of the RX-7.
• Street Racing Syndicate features a customisable FD RX-7.
• Tokyo Xtreme Racer: Zero features all three generations of the RX-7, which can also be customized and driven
• Tokyo Xtreme Racer: 3 features all three generations of the RX-7, which can also be customized and driven
• Import Tuner Challenge features the Mazda RX7 (1993)
• The Fast and The Furious features the Mazda RX7 Efini and the original RX7
• Wangan Midnight Maximum Tune features the FC and FD series
• Wangan Midnight Maximum Tune II features the FC and FD series

External links

• Mazda RX-7 at Curlie

References

• Mauck, Scott and Haynes, John H. (1986). Mazda RX-7 Automotive Repair Manual. Haynes North America,Inc. ISBN 1-85010-050-0.{{cite book}}: CS1 maint: multiple names: authors list (link)
• Yamaguchi, Jack K. (1985). The New Mazda RX-7 and Mazda Rotary Engine Sports Cars. St. Martin's Press, New York. ISBN 0-312-69456-3.
• "Generations: Mazda RX-7 and RX-8". Edmunds.com. {{cite web}}: Unknown parameter |accessmonthday= ignored (help); Unknown parameter |accessyear= ignored (|access-date= suggested) (help)