Inca architecture

Incan architecture is the most significant pre-Columbian architecture in South America. The Incas inherited an architectural legacy from Tiwanaku, founded in the 2nd century BCE in present day Bolivia. The capital of the Inca empire, Cuzco, still contains many fine examples of Inca architecture, although many walls of Inca masonry have been incorporated into Spanish Colonial structures. The famous royal estate of Machu Picchu is a surviving example of Inca architecture. Other significant sites include Sacsayhuaman and Ollantaytambo. The Incas also developed an extensive road system spanning most of the western length of the continent.

Characteristics

Inca buildings were made out of fieldstones or semi-worked stone blocks set in mortar; adobe walls were also quite common, usually laid over stone foundations. The material used in Inca buildings depended on the region, for instance, in the coast they used large rectangular adobe blocks while in the Andes they used local stones. The most common shape in Inca architecture was the rectangular building without any internal walls and roofed with wooden beams and thatch. There were several variations of this basic design, including gabled roofs, rooms with one or two of the long sides opened and rooms that shared a long wall. Rectangular buildings were used for quite different functions in almost all Inca buildings, from humble houses to palaces and temples. Even so, there are some examples of curved walls on Inca buildings, mostly in regions outside the central area of the empire. Two-story buildings were infrequent; when they were built the second floor was accessed from the outside via a stairway or high terrain rather than from the first floor. Wall apertures, including doors, niches and windows, usually had a trapezoidal shape; they could be fitted with double or triple jambs as a form of ornamentation. Other kinds of decoration were scarce; some walls were painted or adorned with metal plaques, in rare cases walls were sculpted with small animals or geometric patterns.

Twelve angle stone, in the Hatun Rumiyoc street of Cuzco, is an example of Inca masonry

The most common composite form in Inca architecture was the kancha, a rectangular enclosure housing three or more rectangular buildings placed symmetrically around a central courtyard. Kancha units served widely different purposes as they formed the basis of simple dwellings as well as of temples and palaces; furthermore, several kancha could be grouped together to form blocks in Inca settlements. A testimony of the importance of these compounds in Inca architecture is that the central part of the Inca capital of Cusco consisted of large kancha, including the Temple of the Sun (Qorikancha) and the Inca palaces. The best preserved examples of kancha are found at Ollantaytambo, an Inca settlement located along the Urubamba River.

Inca architecture is widely known for its fine masonry, which features precisely cut and shaped stones closely fitted without mortar. However, despite this fame, most Inca buildings were actually made out of fieldstone and adobe as described above. In the 1940s, American archaeologist John H. Rowe classified Inca fine masonry in two types: coursed, which features rectangular shaped stones, and polygonal, which features blocks of irregular shape. Forty years later, Peruvian architect Santiago Agurto established four subtypes by dividing the categories identified by Rowe:

• Encased coursed masonry: in which stone blocks are not aligned
• Sedimentary coursed masonry: in which stones are laid out in horizontal rows (i.e., ashlars)
• Cellular polygonal masonry: with small blocks
• Cyclopean polygonal masonry: with very large stones

The first two types were used on important buildings or perimeter walls while the last two were employed mostly on terrace walls and river canalization.

Cyclopean polygonal masonry at Sacsayhuamán

According to Graziano Gasparini and Luise Margolies, Inca stonemasonry was inspired by the architecture of Tiahuanaco, an archaeological site in modern Bolivia built several centuries before the Inca Empire. They argue that according to ethnohistorical accounts the Incas were impressed by these monuments and employed large numbers of stoneworkers from nearby regions in the construction of their own buildings. In addition to this references, they also identified some formal similarities between Tiahuanaco and Inca architecture including the use of cut and polished stone blocks, as well as of double jambs. A problem with this hypothesis is the question of how was expertise preserved in the three hundred years between the collapse of Tiahuanaco and the appearance of the Inca Empire and its architecture. As a solution, John Hyslop has argued that the Tiahuanaco stonemasonry tradition was preserved in the Lake Titicaca region in sites such as Tanka Tanka, which features walls resembling Inca polygonal masonry.

A second major influence on Inca architecture came from the Huari culture, a civilization contemporary to Tiahuanaco. According to Ann Kendall, the Huari introduced their tradition of building rectangular enclosures in the Cusco region, which formed a model for the development of the Inca kancha. There is evidence that such traditions were preserved in the Cusco region after the decline of the Huari as is attested by the enclosures found at sites such as Choquequirao, 28 kilometers southeast of the Inca capital.

Masonry and construction methods

Inca wall in Cuzco

[[Image:Cyark Tambo Colorado Rm42 3.jpg|thumb|left|Digital reconstruction of original Inca painting on Room 42 wall, Tambo Colorado; this late Inca period fortress/palace is still largely intact despite being constructed of adobe and located in an earthquake-prone area of Peru. Remaining traces of the original paint guided this 2005 reconstruction. Laser scan data taken from a CyArk/University of California research

Water engineer Ken Wright estimates that 60 percent of the Inca construction effort was underground. The Inca built their cities with locally available materials, usually including limestone or granite. To cut these hard rocks the Inca used stone, bronze or copper tools, usually splitting the stones along the natural fracture lines. Without the wheel the stones were rolled up wood beams on earth ramps. Extraordinary manpower would have been necessary. Hyslop comments that the “ ‘secret’ to the production of fine Inca masonry…was the social organization necessary to maintain the great numbers of people creating such energy-consuming monuments.”

Usually the walls of Incan buildings were slightly inclined inside and the corners were rounded. This, in combination with masonry thoroughness, led Incan buildings to have a peerless seismic resistance thanks to high static and dynamic steadiness, absence of resonant frequencies and stress concentration points. During an earthquake with a small or moderate magnitude, masonry was stable, and during a strong earthquake stone blocks were “ dancing ” near their normal positions and lay down exactly in right order after an earthquake.

Another building method was called “pillow-faced” architecture. Pillow faced building was achieved by using fired adobe bricks, and mud mortar. The Incas would then sand large, finely shaped stones coated in mud and clay. Then they would fit the bricks and stones together using the mud mortar into jigsaw like patterns. Pillow-faced architecture was typically used for temples and royal places like Machu Picchu.

Agricultural architecture

[[Image:Pisac006.jpg|thumb|Inca agricultural terraces in Pisac]] Perhaps the most renowned aspect of Incan architecture is the use of terraces to increase the land available for farming. These steps provided flat ground surface for food production while protecting their city centers against erosion and landslides common in the Andes. Modern engineers copied this agriculture architecture method, such as Pepperdine University in Malibu, California. The masons at Machu Picchu built these so well that they were still intact in 1912 when Hiram Bingham re-discovered the lost site.

Roads

Main article: Inca road system

The Incas had an extensive road system. A high road crossed the higher regions of the Cordillera from north to south and another lower north-south road crossed the coastal plains. Shorter crossroads linked the two main highways together in several places. The terrain, according to Cieza de Leon, an early chronicler of Inca culture, was formidable. The road system ran through deep valleys and over mountains, through piles of snow, quagmires, living rock, along turbulent rivers; in some places it ran smooth and paved, carefully laid out; in others over sierras, cut through the rock, with walls skirting the rivers, and steps and rests through the snow; everywhere it was clean swept and kept free of rubbish, with lodgings, storehouses, temples to the sun, and posts along the way.

To help travelers on their way, rest houses or tambos were built, here they could spend a night, cook a meal and feed their llamas.

The Incas built suspension rope bridges using natural fibers. These bridges which were made from ropes ingeniously tied together formed a narrow but effective structure. This was the only way to cross rivers on foot. If only one of their hundreds of bridges was damaged, a major road could not fully function. Fortunately, every time a bridge broke, the locals would repair it as quickly as possible.

See also

• Suspension bridge
• Inca rope bridge

References

• Template:Es icon Vergara, Teresa. “Arte y Cultura del Tahuantinsuyo”. Historia del Peru. Editorial Lexus, 2000. ISBN 9972-625-35-4
• Template:Es icon Agurto, Santiago. Estudios acerca de la construcción, arquitectura y planeamiento incas. Lima: Cámara Peruana de la Construcción, 1987.
• Gasparini, Graziano and Margolies, Luize. Inca architecture. Bloomington: Indiana University Press, 1980. ISBN 0-253-30443-1
• Hyslop, John. Inka settlement planning. Austin: University of Texas Press, 1990. ISBN 0-292-73852-8
• Kendall, Ann. Aspects of inca architecture: description, function and chronology. Oxford: British Archaeological Reports, 1985.
• Protzen, Jean-Pierre. Inca architecture and construction at Ollantaytambo. New York: Oxford University Press, 1993.
• Rowe, John. An introduction to the archaeology of Cuzco. Cambridge: Harvard University, 1944.

External links

• Peru Cultural Society - Inca Architecture
• Witnessing the In-visibility of Inca Architecture - University of Minnesota Press