Jump to content

DTS-HD Master Audio

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Mercy11 (talk | contribs) at 00:54, 21 July 2023 (self-published WP:SPS). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

DTS-HD Master Audio

DTS-HD Master Audio (DTS-HD MA; known as DTS++ before 2004[1]) is a multi-channel, lossless audio codec developed by DTS as an extension of the lossy DTS Coherent Acoustics codec (DTS CA; usually itself referred to as just DTS). Rather than being an entirely new coding mechanism, DTS-HD MA encodes an audio master in lossy DTS first, then stores a concurrent stream of supplementary data representing whatever the DTS encoder discarded. This gives DTS-HD MA a lossy "core" able to be played back by devices that cannot decode the more complex lossless audio. DTS-HD MA's primary application is audio storage and playback for Blu-ray Disc media; it competes in this respect with Dolby TrueHD, another lossless surround format.

Specifications

DTS-HD MA can store up to 8 discrete channels of audio (7.1 surround) at up to a 24 bit sample depth and 192 kHz sampling frequency (96 kHz for 6.1 or 7.1 surround).[2] Although DTS-HD MA, and the related DTS-HD, allow virtually any number of channels in the abstract,[3] these limits are imposed for practical reasons of limited storage and bitrate availability. A DTS-HD MA bitstream may have a bitrate no greater than 24.5 Mbit/s (instantaneous), of which no greater than 1.5 Mbit/s may be lossy DTS (as per the DTS CA specification).[4]

The Blu-ray specification stipulates DTS-HD MA as an optional codec, which means that some Blu-ray hardware may not decode it. This is the reason for the bifurcated nature of a DTS-HD MA audio stream; DTS CA, unlike its MA extension, is mandatory, so a player that is not MA-capable can automatically default to an MA-encoded disc's base DTS stream and simply ignore the supplementary data.[4] Alternatively, even if a player is MA-capable, the base stream may be needed for backward compatibility with an older AV receiver (for example, one manufactured during the DVD era).[5]

DTS-HD MA is the encoding format for DTS:X, an object-based surround-sound format that competes with Dolby Atmos. A DTS-HD MA bitstream carrying DTS:X can contain up to 9 simultaneous sound objects, which are dynamically mapped to a user's speaker system during playback, unlike the rigid number and placement of speakers required by channel-based surround (a DTS marketing executive referred to DTS:X in an interview as "whatever.1").[6]

Encoding process

DTS-HD MA is encoded in three steps. First, the audio master is fed to a DTS CA encoder, which generates the core (lossy) audio stream. Next, this lossy audio is decoded and compared to the master, with "residual" data being recorded wherever the two differ. Finally, the residual data is compressed losslessly and merged with the core into one bitstream. A DTS-HD MA decoder simply performs this process in reverse.[7]

DTS-HD MA audio, including DTS:X audio, can be created and edited using DTS's DTS:X Encoder Suite. The DTS-HD Master Audio Suite served the same function before the introduction of DTS:X, and can still be used for DTS-HD MA that does not carry DTS:X.[8]

AV transport

DTS-HD Master Audio may be transported to AV receivers in 5.1, 6.1, or 7.1 channels, in full quality, in one of three ways depending on player and/or receiver support:[7]

  • Over 6, 7 or 8 RCA connectors as analog audio, using the player's internal decoder and digital-to-analog converter (DAC).
  • Over HDMI 1.1 (or higher) connections as 6-, 7-, or 8-channel linear PCM, using the player's decoder and the AV receiver's DAC.
  • Over HDMI 1.3 (or higher) connections as the original DTS-HD Master Audio bitstream, with decoding and DAC both done by the AV receiver. (This is the transport mode required for DTS:X playback.)

S/PDIF does not have the bandwidth to carry DTS-HD MA (or PCM in more than 2 channels). A setup using S/PDIF audio may output DTS-HD MA as either lossy DTS (which S/PDIF can carry) or downmixed stereo PCM.

References

  1. ^ Thomson, Kristin (2004-11-01). "DTD Unveils DTS-HD Brand For High Definition Media Formats". Retrieved 2009-05-06.
  2. ^ "DTS-HD Master Audio Specifications (DTS-HD Master Audio™ - DTS)". January 10, 2012. Archived from the original on January 10, 2012. Retrieved January 10, 2012.
  3. ^ Morrison, Geoffrey (September 23, 2009). "Dolby Pro Logic IIz vs. Audyssey DSX vs. DTS". Home Entertainment. Archived from the original on 2010-10-10. Retrieved November 15, 2010. DTS-HD can natively support over 2,000 individual channels, so according to DTS adding any number of discrete height channels would be easy.
  4. ^ a b DeBoer, Clint (2007-06-04). "DTS Demos Master Audio via PC". Audioholics Online A/V Magazine. Retrieved 2019-01-01. DTS-HD Master Audio delivers sound that is bit-for-bit identical to the studio master. It can deliver audio at variable bit rates which are significantly higher than standard DVDs. DTS-HD Master Audio can provide up to 7.1 audio channels at a 96k sampling frequency / 24-bit depth or 5.1 audio channels at 192 kHz that are identical to the original master. The DTS-HD Master Audio bit stream also contains the DTS 1.5 Mbps core for backwards compatibility with existing DTS-enabled home theater systems, and delivery of 5.1 channels of sound at twice the resolution found on most standard DVDs.
  5. ^ "DTS-HD Master Audio: What You Need to Know". Lifewire. Archived from the original on 2019-03-17.
  6. ^ Waniata, Ryan (2015-04-13). "Lookout Dolby Atmos, DTS just entered the next era of surround sound with DTS:X". Digital Trends. Retrieved 2016-06-09.
  7. ^ a b "DTS-HD Audio: Consumer White Paper for Blu-ray Disc Applications" (PDF). November 2006. Retrieved 2020-01-24.
  8. ^ "DTS-HD Master Audio Suite(TM)". Archived from the original on 2018-03-04. Retrieved 2019-01-01.
Retrieved from "https://en.wikipedia.org/w/index.php?title=DTS-HD_Master_Audio&oldid=1166353412"