Sonata 8
Development | |
---|---|
Designer | Gary Mull |
Location | United States |
Year | 1979 |
Builder(s) | Investigator Yachts |
Name | Sonata 8 |
Boat | |
Displacement | 2,822 lb (1,280 kg) |
Draft | 5.09 ft (1.55 m) |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 26.25 ft (8.00 m) |
LWL | 19.75 ft (6.02 m) |
Beam | 8.20 ft (2.50 m) |
Hull appendages | |
Keel/board type | lifting keel |
Ballast | 500 lb (227 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
General | Fractional rigged sloop |
I foretriangle height | 25.75 ft (7.85 m) |
J foretriangle base | 9.00 ft (2.74 m) |
P mainsail luff | 28.00 ft (8.53 m) |
E mainsail foot | 11.48 ft (3.50 m) |
Sails | |
Mainsail area | 160.72 sq ft (14.931 m2) |
Jib/genoa area | 115.88 sq ft (10.766 m2) |
Total sail area | 276.60 sq ft (25.697 m2) |
The Sonata 8 is a sailboat that was designed by American Gary Mull as a one design racer and first built in 1979. The design is out of production.[1][2]
The boat was built by Investigator Yachts in Australia.[1]
The Sonata 8 design was developed into the Sonata 26 in 1980 and produced by the same manufacturer. The two boats share the same specifications.[1]
Design
The Sonata 8 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a transom-hung rudder and a lifting or optionally fixed fin keel. It displaces 2,822 lb (1,280 kg) and carries 500 lb (227 kg) of ballast.[1]
The boat has a draft of 5.09 ft (1.55 m) with the keel down and 0.69 ft (0.21 m) with the keel retracted. The fixed keel version has a draft of 5.2 ft (1.6 m).[1]
Operational history
After its introduction in 1979 the design was raced in Australia as a one-design class.[1]
See also
Related development
Similar sailboats
References
- ^ a b c d e f Browning, Randy (2016). "Sonata 8 sailboat specifications and details". sailboatdata.com. Retrieved 18 October 2016.
- ^ Browning, Randy (2016). "Garry Mull (1939-1994)". sailboatdata.com. Retrieved 18 October 2016.