Jump to content

Lutke's Meule, Nijeveen

Coordinates: 52°43′47″N 6°10′04″E / 52.72972°N 6.16778°E / 52.72972; 6.16778
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Simeon (talk | contribs) at 18:52, 2 April 2020 (Adding short description: "Dutch windmill" (Shortdesc helper)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Lutke's Meule
Lutke's Meule, February 2009
Map
Origin
Mill nameLutke's Meule
Mill locationBurgemeester Haitsmanlaan 24, 7948 AE, Nijeveen
Coordinates52°43′47″N 6°10′04″E / 52.72972°N 6.16778°E / 52.72972; 6.16778
Operator(s)G Lutke
Year built1990
Information
PurposeCorn mill
TypeSmock mill
StoreysTwo-storey smock
Base storeysOne-storey base
Smock sidesEight sides
No. of sailsFour sails
Type of sailsCommon sails, Faueël streamlined leading edges
WindshaftWood
WindingTailpole
No. of pairs of millstonesOne pair
Size of millstones600 millimetres (2 ft 0 in)
Year lostDismantled 2009

Lutke's Meule was a small smock mill in Nijeveen, Drenthe, the Netherlands. It was built in 1990 and dismantled in June 2009.

History

Lutke's Meule was built in 1990 by Gerard Lutke, miller at De Sterrenberg. The mill was able to turn by wind by October 1992 and a pair of millstones were installed in 1993. In 2008, one of the wooden stocks broke, reducing the mill to two sails. Development in the surrounding area had reduced the ability of the wind to power the mill. In June 2009 Lutke's Meule was dismantled. It is intended that it will be rebuilt in New Zealand.[1]

Description

Lutke's Meule was what the Dutch describe as an "achtkante stellingmolen". It was a small smock mill on a single-storey base with a stage at first-floor level,[1] 2.30 metres (7 ft 7 in) above ground level.[2] The base and smock were covered in weatherboards and the cap was covered in Dakleer. The mill was winded by tailpole and winch. The four Common sails had a span of 7.50 metres (24 ft 7 in).[1] The leading edges were streamlined using the Faueël system. The sails were carried in a wooden windshaft.[2] The mill drove one pair of 600 millimetres (2 ft 0 in) diameter millstones.[1]

References

  1. ^ a b c d "Lutke's Meule, Nijeveen" (in Dutch). Molendatabase. Retrieved 12 September 2009.
  2. ^ a b "Technische gegevens" (in Dutch). De Hollandsche Molen. Archived from the original on 4 March 2016. Retrieved 12 September 2009. (Click on "Technische Gegevens" to view.)