Jump to content

Ideal 18

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ahunt (talk | contribs) at 00:50, 7 October 2020 (moved text up). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Ideal 18
Development
DesignerBruce Kirby
LocationCanada
Year1989
No. built325
Builder(s)Ontario Yachts
Shumway Marine
NameIdeal 18
Boat
Displacement1,240 lb (562 kg)
Draft3.25 ft (0.99 m)
Hull
TypeMonohull
ConstructionFibreglass
LOA17.85 ft (5.44 m)
LWL14.35 ft (4.37 m)
Beam6.20 ft (1.89 m)
Hull appendages
Keel/board typefin keel
Ballast700 lb (318 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height19.00 ft (5.79 m)
J foretriangle base7.00 ft (2.13 m)
P mainsail luff23.50 ft (7.16 m)
E mainsail foot9.25 ft (2.82 m)
Sails
SailplanFractional rigged sloop
Mainsail area108.69 sq ft (10.098 m2)
Jib/genoa area66.50 sq ft (6.178 m2)
Spinnaker area240 sq ft (22 m2)
Total sail area175.19 sq ft (16.276 m2)
Racing
D-PN99.6

The Ideal 18 is a Canadian trailerable sailboat that was designed by Bruce Kirby as a one design racer and first built in 1989.[1][2][3]

Production

The design was built by Ontario Yachts in Burlington, Ontario, Canada and also by Shumway Marine in Rochester, New York, United States, where production continues. By 1994, 60 boats had been completed and by 2020, 325 boats had been built.[1][3][4][5][6]

Design

The Ideal 18 is a recreational keelboat, built predominantly of fibreglass. It has a fractional sloop rig with aluminum spars and swept spreaders. The hull has a raked stem, a walk-through reverse transom, an internally mounted spade-type rudder controlled by a wooden tiller and a fixed fin keel. It displaces 1,240 lb (562 kg) and carries 700 lb (318 kg) of fibreglass-encased lead ballast. It has built-in flotation for safety.[1][3]

The boat has a draft of 3.25 ft (0.99 m) with the standard keel. The design has a hinged mast for ease of ground transport.[1]

For sailing the design is equipped with a roller furling jib. The seating is on benches moulded into the cockpit sides. The boat has no winches and does not require them. The boat is a displacement, non-planing, design.[3]

The design has a Portsmouth Yardstick racing average handicap of 99.6 and is normally raced with a crew of two sailors, although the cockpit can accommodate four adults.[3]

Operational history

In a 1994 review, Richard Sherwood described the Ideal 18 as, "a strong little keelboat designed for club racing, with rigid rules, such as only one set of sails a year, and no hiking. The jib barely overlaps, is a decksweeper, is self-tacking, and has roller furling. (The roller furling gear is set below deck level.)"[3]

See also

References

  1. ^ a b c d McArthur, Bruce (2020). "Ideal 18 sailboat". sailboatdata.com. Archived from the original on 6 October 2020. Retrieved 6 October 2020.
  2. ^ McArthur, Bruce (2020). "Bruce Kirby". sailboatdata.com. Archived from the original on 6 October 2020. Retrieved 6 October 2020.
  3. ^ a b c d e f Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 88-89. Houghton Mifflin Company, 1994. ISBN 0-395-65239-1
  4. ^ McArthur, Bruce (2020). "Ontario Yachts". sailboatdata.com. Archived from the original on 6 October 2020. Retrieved 6 October 2020.
  5. ^ McArthur, Bruce (2020). "Shumway Marine (USA)". sailboatdata.com. Archived from the original on 6 October 2020. Retrieved 6 October 2020.
  6. ^ Shumway Marine (2020). "The Ideal Boat". shumwaymarine.com. Archived from the original on 6 October 2020. Retrieved 6 October 2020.