Jump to content

Atkinson Hyperlegible

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by LightNightLights (talk | contribs) at 02:57, 17 December 2022 (→History: Give a compromise for the "tactile writing system" sentence (MOS:STYLEVAR and WP:AINTBROKE aren't really applicable as the former is for MoS recommendations and changing the sentence arguably "improves the encyclopedia a little")). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Atkinson Hyperlegible
The 335 characters of Atkinson Hyperlegible in its regular style, comprising Arabic numerals, Latin letters, common punctuation and symbols, common Latin diacritics and ligatures, and selected mathematical and typographical symbols.
CategorySans-serif
ClassificationGrotesque
Designer(s)Applied Design Works
FoundryBraille Institute
Date created2019
Websitehttps://brailleinstitute.org/freefont

Atkinson Hyperlegible is a freely available typeface built around a grotesque sans-serif core, intended to be optimally legible for readers who are partially visually impaired, with all characters easily distinguishable from one another. It was developed by the Braille Institute of America in collaboration with Applied Design Works and is available under the SIL Open Font License. It won Fast Company's Innovation by Design Award for Graphic Design in 2019 and was shortlisted for a graphic design award by Dezeen in 2020.

History

On the top line, the characters "B8 1Iil". On the bottom line, the same characters, very blurred but still readable to most people.
Above: How the font appears normally.
Below: A blur effect simulates how the same letters might appear to someone with a low-vision condition.

The project began as part of a visual rebranding at the Braille Institute,[1] which contracted the studio Applied Design Works to work with a specialist in low-vision conditions from the Braille Institute and a panel of people with such conditions.[2] Most students that the Braille Institute works with are not fully blind and do not use the tactile writing system braille.[3] Applied Design Works looked for a typeface that would suit the Braille Institute's needs but were unable to find one.[3] Experimenting with both serif and sans-serif fonts including Times New Roman and Frutiger, they found that distinguishing among homoglyphs, and even among some characters that do not appear very similar to fully sighted people, was difficult for partially visually impaired people because of these fonts' focus on uniformity. Thus the project shifted to creating a typeface that would be as legible as possible for the community the Braille Institute serves.[1]

Applied Design Works' creative director, Craig Dobie, put Elliott Scott in charge of designing the typeface.[1] Building around a grotesque sans-serif core,[4] the Applied Designs Works team worked to make sure that none of the typeface's glyphs could be mistaken for any other, consulting with clients of the Braille Institute and familiarizing themselves with research into legibility.[3] The Braille Institute named the finished product after the institute's founder, J. Robert Atkinson,[5] and released it under the SIL Open Font License on its website[6] and through Google Fonts.[7]

In 2019, Atkinson Hyperlegible won Fast Company's Innovation by Design Award for Graphic Design.[1] The next year, it was shortlisted for a graphic design award by Dezeen,[8] losing to a series of heat-reactive stamps that illustrate climate change.[9]

Design

The characters "8ië?;", with all dots circled.
Atkinson Hyperlegible uses many circles, in a nod to braille.

Atkinson Hyperlegible contains four styles, each of 335 glyphs: regular, bold, italics, and italics bold. It supports diacritics in 27 languages.[4]

Elliott Scott of Applied Design Works and studio creative director Craig Dobie made the decision "to break a lot of rules that a lot of designers will care about",[1] for instance adding serifs to the uppercase i but not the uppercase tee[2] and giving the uppercase ef a significantly longer tie (middle bar) than the uppercase e.[1] Mark Wilson of Fast Company writes:[1]

Stare too long at its quirks, and Atkinson Hyperlegible almost feels like it has an identity crisis, as if a dozen fonts were smashed together to make one. But typed out on a page, it's been treated with careful kerning that the average eye just kind of accepts, as if it was any other typeface.

Other efforts to make letters distinct include exaggerating letters' shapes and angling their spurs. There are many circles in Atkinson Hyperlegible, a nod to braille dots and the Braille Institute.[2]

References

  1. ^ a b c d e f g Wilson, Mark (19 September 2019). "This typeface hides a secret in plain sight. And that's the point". Innovation by Design. Fast Company. New York City. Retrieved 10 November 2022.
  2. ^ a b c Crook, Lizzie (11 September 2020). "Atkinson Hyperlegible typeface is designed for visually impaired readers". Dezeen. London. Retrieved 10 November 2022.
  3. ^ a b c Mangan, Tom (9 June 2022) [8 November 2019]. "New Typeface Boosts Legibility for Low Vision Readers". All About Vision. Retrieved 10 November 2022.
  4. ^ a b Budrick, Callie (14 October 2020). "The Hyperlegible Typeface Changing How We See Print". Design Inspiration. Print. Retrieved 10 November 2022.
  5. ^ Marsden, Rhodri (23 August 2021). "What's in a font? How typography can help us read better". The National. Abu Dhabi, UAE. Retrieved 10 November 2022.
  6. ^ "Download the Atkinson Hyperlegible Font". Braille Institute of America. Retrieved 23 September 2021.
  7. ^ "Atkinson Hyperlegible". Google Fonts. Retrieved 10 November 2022.
  8. ^ "Shortlists". Dezeen Awards 2020. Dezeen. London. Retrieved 10 November 2022.
  9. ^ "Climate Change Stamps | Winner". Dezeen Awards 2020. Dezeen. London. Retrieved 10 November 2022.
Wikimedia Commons has media related to Atkinson Hyperlegible.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Atkinson_Hyperlegible&oldid=1127868055"