General Electric CF6
This article needs additional citations for verification. (November 2008) |
CF6 | |
---|---|
![]() | |
CF6 turbofan at the KLM engine shop | |
Type | Turbofan |
Manufacturer | GE Aviation |
First run | 1971 |
Major applications | Airbus A300 Airbus A310 Airbus A330 Boeing 747 Boeing 767 Lockheed C-5M Super Galaxy McDonnell Douglas DC-10 McDonnell Douglas MD-11 |
Number built | 8,300 (2018)[1] |
Developed from | General Electric TF39 |
Developed into | General Electric LM6000 |
The General Electric CF6 is a family of high-bypass turbofan engines produced by GE Aviation. Based on the TF39, the first high-power high-bypass jet engine, the CF6 powers a wide variety of civilian airliners. The basic engine core also powers the LM2500, LM5000, and LM6000 marine and power generation turboshafts. The newer GEnx family has been introduced, intended to replace the CF6 family.
Development
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/75/MADRID_060508_MXALX_054.jpg/170px-MADRID_060508_MXALX_054.jpg)
After developing the TF39 for the C-5 Galaxy in the late 1960s, GE offered a more powerful variant for civilian use, the CF6, and quickly found interest in two designs being offered for a recent Eastern Airlines contract, the Lockheed L-1011 and the McDonnell Douglas DC-10. Lockheed eventually selected the Rolls-Royce RB211, but Douglas stuck with the CF6 and the DC-10 entered service in 1971. It was also selected for versions of the Boeing 747. Since then, the CF6 has powered versions of the Airbus A300, A310 and A330, Boeing 767, and McDonnell Douglas MD-11.
The high bypass of the CF6 represented a historic breakthrough in fuel efficiency.[2]
By 2018, GE has delivered more than 8,300 CF6s: 480 -6s, 2,200 -50s, 4,400 -80C2s, more than 730 -80E; plus 3,000 LM6000 industrial and marine derivatives. The in-service fleet include 3,400 engines, more than all the GE90s and GEnx, generating over than 600 shop visits per year. GE will be delivering engines well into the 2020s and they will fly for 20 to 25 years, until 2045-50: more than 75 years since the first CF6.[1]
As express delivery spurs an air cargo resurgence, Boeing plans to increase the CF6-80C2-powered 767 delivery rate from 2.5 to 3 per month in 2020, a type introduced in 1982. As CF6-80E1s are still delivered for the A330 and A330 MRTT, CF6 production will grow from 50 to 60-80 per year by 2020. GE also studies reengining the Progress D-18-powered Antonov An-124 freighters with CargoLogicAir, a Volga-Dnepr subsidiary. This would likely provide a range increase, and Volga-Dnepr Group operates 12 aircraft, implying a 50-60 engines with spares program.[1]
Variants
CF6-6
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f0/CF6-6_engine_cutaway.jpg/220px-CF6-6_engine_cutaway.jpg)
The CF6-6 was a development of the military TF39. It was first used on the McDonnell Douglas DC-10-10.
This initial version of the CF6 has a single-stage fan with one core booster stage, driven by a 5-stage LP (low pressure) turbine, turbocharging a 16-stage HP (high pressure) axial compressor driven by a 2-stage HP turbine; the combustor is annular; separate exhaust nozzles are used for the fan and core airflows. The 86.4-in (2.19-m) diameter fan generates an airflow of 1,300 lb/s (590 kg/s), resulting in a relatively high bypass ratio of 5.72. The overall pressure ratio of the compression system is 24.3. At maximum take-off power, the engine develops a static thrust of 41,500 lb (185.05 kN).
Undeveloped variants
The General Electric CF6-32 was to be a lower thrust derivative of the CF6-6 for the Boeing 757. In 1981, General Electric formally abandoned development of the engine, leaving the Boeing 757 engine market to Pratt & Whitney and Rolls-Royce.[3]
CF6-50
The CF6-50 series are high-bypass turbofan engines rated between 51,000 and 54,000 lb (227.41 to 240.79 kN, or '25 tons') of thrust. The CF6-50 was developed into the LM5000 industrial turboshaft engines. It was launched in 1969 to power the long range McDonnell Douglas DC-10-30, and was derived from the earlier CF6-6.
Not long after the -6 entered service, an increase in thrust and therefore core power was required. Unable to increase (HP) turbine rotor inlet temperature, General Electric chose the expensive path of reconfiguring the CF6 core to increase its basic size. They removed two stages from the rear of the HP compressor, leaving an empty air passage where the blades and vanes had once been. Two booster stages were added to the LP (low pressure) compressor, which increased the overall pressure ratio to 29.3. Although the 86.4 in (2.19 m) diameter fan was retained, the airflow was raised to 1,450 lb/s (660 kg/s), yielding a static thrust of 51,000 lbf (227 kN). The increase in core size and overall pressure ratio raised the core flow, decreasing the bypass ratio to 4.26.
In late 1969, the CF6-50 was selected to power the then new Airbus A300. Air France became the launch customer for the A300 by ordering six aircraft in 1971. In 1975, KLM became the first airline to order the Boeing 747 powered by the CF6-50. This led further developments to the CF6 family such as the CF6-80. The CF6-50 also powered the Boeing YC-14 USAF AMST transport prototype.
The basic CF6-50 engine was also offered with a 10% thrust derate for the 747SR, a short-range high-cycle version used by All Nippon Airways for domestic Japanese operations. This engine is termed the CF6-45.
The engine is designated the General Electric F103 in United States Air Force service on KC-10 Extenders and Boeing E-4s.
CF6-80
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/35/General_Electric_CF6-80C2K1F_Engine_at_JASDF_Gifu_Air_Base_October_30%2C_2016_%28cropped%29.jpg/220px-General_Electric_CF6-80C2K1F_Engine_at_JASDF_Gifu_Air_Base_October_30%2C_2016_%28cropped%29.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/75/Ge_cf6_turbofan.jpg/220px-Ge_cf6_turbofan.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/25/National_Air_and_Space_Museum_-_Washington_DC_-_General_Electric_CF6_-_Compressor_and_Combustor_Cut_Out.jpg/220px-National_Air_and_Space_Museum_-_Washington_DC_-_General_Electric_CF6_-_Compressor_and_Combustor_Cut_Out.jpg)
The CF6-80 series are high-bypass turbofan engines with a thrust range of 48,000 to 75,000 lb (214 to 334 kN). Although the HP compressor still has 14 stages, GE did take the opportunity to tidy-up the design, by removing the empty air passage at compressor exit.[citation needed]
The -80 series is divided into three distinct models.
CF6-80A
The CF6-80A, which has a thrust rating of 48,000 to 50,000 lb (214 to 222 kN), powered two twinjets, the Boeing 767 and Airbus A310. The GE-powered 767 entered airline service in 1982, and the GE powered A310 in early 1983. It is rated for ETOPS operations.
For the CF6-80A/A1, the fan diameter remains at 86.4 in (2.19 m), with an airflow of 1435 lb/s (651 kg/s). Overall pressure ratio is 28.0, with a bypass ratio of 4.66. Static thrust is 48,000 lbf (214 kN). The basic mechanical configuration is the same as the -50 series.
CF6-80C2
For the CF6-80C2-A1, the fan diameter is increased to 93 in (2.36 m), with an airflow of 1750 lb/s (790 kg/s). Overall pressure ratio is 30.4, with a bypass ratio of 5.15. Static thrust is 59,000 lb (263 kN). An extra stage is added to the LP compressor, and a 5th to the LP turbine.[4]
The CF6-80C2 is currently certified on eleven widebody aircraft models including the Boeing 747-400, and McDonnell Douglas MD-11. The CF6-80C2 is also certified for ETOPS-180 for the Airbus A300, Airbus A310, Boeing 767, Kawasaki C-2, and, as the F138, the Lockheed C-5M Super Galaxy.
CF6-80E1
The CF6-80E1 is the highest thrust power of CF6-80 Series family, the fan tip diameters increased more to 96.2 in (2.443m), with Overall pressure ratio is 32.6, with a bypass ratio of 5.3.[5] The 68,000 to 72,000 lbf (300 to 320 kN) variant competes with the Rolls-Royce Trent 700 and the Pratt & Whitney PW4000 to power the Airbus A330.[6]
Other variants
The industrial and marine development of the CF6-80C2, the LM6000 Series, has found wide use including fast ferry and high speed cargo ship applications, as well as in power generation. The LM6000 gas turbine family provides power in the 40 to 56 MW range for utility, industrial, and oil & gas applications.[7]
Accidents and incidents
In 1973, a CF6-6 fan assembly disintegrated, resulted in the loss of cabin pressurization of National Airlines Flight 27 over New Mexico, United States.[8] In 1989, a CF6-6 failed, causing United Airlines Flight 232 to crash in Sioux City, Iowa.
In 2000, the National Transportation Safety Board (NTSB) warned that the high-pressure compressor could crack.[9]
Following a series of high-pressure turbine failures on 6 September 1997,[10] 7 June 2000[11] and 8 December 2002,[12] and resulting in 767s being written off on 22 September 2000,[13] on 2 June 2006,[14] and on 28 October 2016,[15] the Federal Aviation Administration issued an airworthiness directive mandating inspections for over 600 engines and the NTSB believed that this number should be increased to include all -80 series engines with more than 3000 cycles since new or since last inspection.[16]
In May 2010, The NTSB warned that the low-pressure turbine rotor disks could fail.[17] Four uncontained failures of CF6-45/50 engines in the preceding two years prompted it to issue an "urgent" recommendation to increase inspections of the engines on U.S. aircraft : none of the four incidents of rotor disk imbalance and subsequent failure resulted in an accident, but parts of the engine did penetrate the engine housing in each case[18]
Applications
- Airbus A300
- Airbus A310
- Airbus A330
- Boeing 747
- Boeing 767
- Boeing E-4
- Boeing E-767
- Boeing KC-767
- Boeing VC-25A (Air Force One)
- Boeing YC-14
- Kawasaki C-2
- Lockheed C-5M Super Galaxy
- McDonnell Douglas DC-10
- McDonnell Douglas KC-10 Extender
- McDonnell Douglas MD-11
- Northrop Grumman E-10 MC2A
-
after the Airbus A300 first flight in 1972
-
on an Airbus A330
-
Two CF6s under a Boeing 747 wing
-
Single CF6 on a Boeing 767 wing
-
installed under the Kawasaki C-2 high wing
Specifications
Variant | CF6-6 | CF6-50 | CF6-80A | CF6-80C2 | CF6-80E1 |
---|---|---|---|---|---|
Type | Dual rotor, axial flow, high bypass ratio turbofan, annular combustor | ||||
Compressor | Fan & 1LP + 16HP | Fan & 3LP + 14HP | Fan & 4LP + 14HP | ||
Turbine | 2HP + 5LP | 2HP + 4LP | 2HP + 5LP | ||
Length | 188 in (478 cm) | 183 in (465 cm) | 167 in (424 cm) | 168 in (427 cm) | |
Diameter | 105 in (267 cm)[20][21][22] | 106 in (269 cm)[4] | 114 in (290 cm)[4] | ||
Takeoff thrust | 41,500 lbf 185 kN |
51,500–54,000 lbf 229–240 kN |
48,000–50,000 lbf 210–220 kN |
52,200–61,960 lbf 232.2–275.6 kN |
65,800–69,800 lbf 293–310 kN |
Pressure ratio | 25–25.2 | 29.2–31.1 | 27.3–28.4 | 27.1–31.8 | 32.4–34.8 |
Bypass ratio | 5.76–5.92[20] | 4.24–4.4[21] | 4.59–4.66[22] | 5–5.31[4] | 5–5.1[23] |
Max. power TSFC | 0.35 lb/lbf/h 9.9 g/kN/s[20] |
0.368–0.385 lb/lbf/h 10.4–10.9 g/kN/s[21] |
0.355–0.357 lb/lbf/h 10.1–10.1 g/kN/s[22] |
0.307–0.344 lb/lbf/h 8.7–9.7 g/kN/s[4] |
0.332–0.345 lb/lbf/h 9.4–9.8 g/kN/s[4] |
Application[24] | DC-10-10 | B747, DC-10-15/30, A300 | A310, B767 | A300/310, B747-400, B767, MD-11, C-5M | A330 |
TCDS | CF6-6[25] | CF6-50[25] | CF6-80A[26] | CF6-80C2[26] | CF6-80E1[27] |
Weight[a] | 8,176 lb 3,709 kg |
8,825–9,047 lb 4,003–4,104 kg |
8,760–8,776 lb 3,973–3,981 kg |
9,480–9,860 lb 4,300–4,470 kg |
11,225 lb 5,092 kg |
Max. LP RPM | 3,810 | 4,102 | 4,016 | 3,854 | 3,835 |
Max. HP RPM | 9,925 | 10,761 | 10,859 | 11,055 | 11,105 |
Thrust-to-weight ratio | 5.08 | 5.84–5.97 | 5.48–5.7 | 5.51–6.28 | 5.86–6.22 |
- ^ Dry, includes basic engine accessories & optional equipment
See also
Related development
Comparable engines
- Ivchenko-Progress D-18
- Pratt & Whitney JT9D
- Pratt & Whitney PW4000
- Rolls-Royce RB211
- Rolls-Royce Trent 700
Related lists
References
- ^ a b c Guy Norris (Oct 10, 2018). "Freighter Growth And Possible An-124 Reengining Boost CF6 Prospects". Aviation Week & Space Technology.
- ^ Stephen Trimble (3 Jul 2015). "Industry sees path to carbon-neutral aviation". Flight Global.
- ^ "New engine proposed as GE drops CF6-32" (PDF). Flightglobal. January 31, 1981. Retrieved October 23, 2013.
- ^ a b c d e f "CF6-80C2 Engine". GE Aviation. Archived from the original on 2008-11-21.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ "CF6-80E1 - GE Aviation" (PDF).
- ^ "CF6-80E: Past, present and future" (PDF). Engine Yearbook. 2006.
- ^ "LM6000 & SPRINT Aeroderivative Gas Turbine Packages (36 - 64 MW)". GE Distributed Power. Retrieved 2014-06-28.
- ^ "National Airlines Flight 27, McDonnell Douglas DC-10-10, N60NA". Lessons Learned. Federal Aviation Administration.
- ^ "Safety Recommendation A-00-104" (PDF). National Transportation Safety Board. August 9, 2000.
- ^ "Report on aircraft C-FTCA 6 September 1997 engine failure". Aviation Safety Network.
- ^ "Report on aircraft PP-VNN 7 June 2000 engine failure". Aviation Safety Network.
- ^ "Report on aircraft ZK-NBC 8 December 2002 engine failure". Aviation Safety Network.
- ^ "Report on aircraft N654US 22 September 2000 engine failure". Aviation Safety Network.
- ^ "Report on aircraft N330AA 2 June 2006 engine failure". Aviation Safety Network.
- ^ "Report on aircraft N345AN 28 October 2016 engine failure". Aviation Safety Network.
- ^ "NTSB wants at-risk GE CF6 engines removed". Flight International. September 5, 2006.
- ^ "Four Recent Uncontained Engine Failure Events Prompt NTSB to Issue Urgent Safety Recommendations to FAA". National Transportation Safety Board. May 27, 2010.
- ^ Mike M. Ahlers (May 28, 2010). "Jet engine failures overseas prompt 'urgent' NTSB recommendation here". CNN.
- ^ "The CF6 Engine". GE Aviation.
- ^ a b c "Model CF6-6". GE Aviation. Archived from the original on 2008-11-21.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ a b c "Model CF6-50". GE Aviation. Archived from the original on 2008-11-21.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ a b c "Model CF6-80A". GE Aviation. Archived from the original on 2008-11-21.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ "Model CF6-80A". GE Aviation. Archived from the original on 2008-11-21.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ "Commercial Aircraft Engines > CF6". MTU.
- ^ a b "Type Certificate Data Sheet E23EA" (PDF). FAA. June 10, 2013.
- ^ a b "Type Certificate Data Sheet E13NE" (PDF). FAA. September 11, 2014.
- ^ "Type Certificate Data Sheet E41NE" (PDF). FAA. June 10, 2013.
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Official website
- "CF6-80C2 engine history and evolution" (PDF). The Engine Yearbook. 2007.
- Stephen Trimble (21 Dec 2010). "General Electric celebrates 25th anniversary of best-selling widebody engine". Flight Global.