Jump to content

Klingon scripts

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by ChristTrekker (talk | contribs) at 19:35, 17 November 2016 (→ConScript Unicode Registry: change to use {{script}} template). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Klinzhai or Mandel script
Script type
Alphabet
– Latin cipher
DirectionLeft-to-right Edit this on Wikidata
LanguagesKlingonaase?
On this page, Klingon text in the Latin alphabet is displayed in typewriter font, and with the modifier letter apostrophe ( ʼ ) rather than the ASCII apostrophe ( ' ), which is a punctuation mark.
See Klingon language § Writing systems.
pIqaD

Script type
DirectionLeft-to-right Edit this on Wikidata
LanguagestlhIngan Hol (Klingon)
ISO 15924
ISO 15924Piqd (293), ​Klingon (KLI pIqaD)
Unicode
CSUR U+F8D0..U+F8FF

Klingon alphabets are fictional alphabets used in the Star Trek movies and television shows to write the Klingon language.

In Marc Okrand's The Klingon Dictionary this alphabet is named as pIqaD, but no information is given about it. When Klingon symbols are used in Star Trek productions they are merely decorative graphic elements, designed to simulate real writing and to create an appropriate atmosphere.

The Astra Image Corporation designed the symbols (currently used to "write" Klingon) for Star Trek: The Motion Picture, although these symbols are often incorrectly attributed to Michael Okuda.[1] They based the letters on the Klingon battlecruiser hull markings (three letters) first created by Matt Jeffries, and on Tibetan writing because the script had sharp letter forms—used as a testament to the Klingons' love for bladed weapons.

KLI pIqaD

The KLI pIqaD
KLI pIqaD text sample

The KLI version of the pIqaD alphabet was created by an anonymous source at Paramount, who based his/her alphabet on letters seen in the show. This source sent in his/her alphabet to the Klingon Language Institute and the KLI uploaded it onto its Web site.[2] But the vast majority of Klingonists still prefer the Latin alphabet.[3]

The alphabet is quite simple: It contains twenty-six letters with a one-to-one grapheme-phoneme correspondence: that is, one letter represents one sound and one sound is written with one letter. There are also ten numerals in the set. It is written from left to right, top to bottom like English. There is no actual punctuation; however, those that use punctuation with the alphabet, use Skybox punctuation symbols (see below).

The KLI pIqaD script is registered in the ConScript registry in the Private Use Area of Unicode.

Bing translate translates between many languages and Klingon, including the KLI pIqaD script.[4] Bing currently uses the Qaak private use script code for pIqaD until an official ISO 15924 script code is assigned.

Google provides Klingon content, but its web server currently doesn't recognize the tlh language tag.

ConScript Unicode Registry

In September 1997, Michael Everson made a proposal for encoding KLI pIqaD in Unicode.[5] The Unicode Technical Committee rejected the Klingon proposal in May 2001 on the grounds that research showed almost no use of the script for communication, and the vast majority of the people who did use Klingon employed the Latin alphabet by preference.[3] Everson created a mapping of pIqaD into the Private Use Area of Unicode, which he listed in the ConScript Unicode Registry (U+F8D0 to U+F8FF[6]). Since then several fonts using that encoding have appeared, and software for typing in pIqaD has become available. Existing text in Romanization can easily be converted to pIqaD also. Bing translator can translate between pIqaD and Latin forms.[7]

If you have a ConScript-compliant font installed, the following PUA text should display:

  
Heghlu’meH QaQ jajvam.
"Today is a good day to die."

The following is a pangram:

    
qajunpaQHeylIjmo’ batlh DuSuvqang charghwI’ ’It.
"Because of your apparent audacity the depressed conqueror is willing to fight you."
Klingon[1][2]
ConScript Unicode Registry code chart
  0 1 2 3 4 5 6 7 8 9 A B C D E F
U+F8Dx
U+F8Ex
U+F8Fx
Notes
1.^ As of 1997-02-14 version
2.^ Grey areas indicate non-assigned code points

Earlier variations

Until the Klingon Language Institute promoted a standardized alphabet for Klingon there were previous variations used primarily for decorative effect. These variants were never adopted by the Klingon speaking community and aren't used in modern Klingon.

Skybox pIqaD

The Klingon pIqaD according to Skybox
Skybox pIqaD text sample

The KLI adapted version of pIqaD utilizes the character set originally assembled by author Thomas E. Scheuer in his publication "Mortas-te-Kaase - the Death's Hand Battle Fleet" fan organization group operations manual (compiled, written, illustrated and published by author Thomas E. Scheuer from 1989–1994) which the author and founder of the KLI later became a member of, and learned of the MTK character assemblage and membership booklet designations, isn't the only mapping of Klingon letters. The Astra Image letters as released in the "Mortas-te-Kaase" were taken and used in the Paramount-endorsed Bitstream font pack. They were used to make a font with ten letters of the English alphabet: "e" to "n" being represented by the ten different klingon letters. This font itself has been used by the Star Trek production team when creating Klingon graphics; however it is still used only as random gibberish on the shows. Dr. Schoen would often refer inquiries to Thomas Scheuer as he was still a student of the Klingon language at the time. The Mortas-te-Kaase organisation was also in very close contact with linguist Marc Okrand, who was also an active member of MTK and would often release exclusive additional words and phrases through the regular publications of the organisation via their newsletter "veS QonoS". Scheuer was never credited however, in any of Dr. Schoen's works or publications, and thus following commercial usage was not credited properly either. A copy of the original release as photocopied from MTK member manual is displayed at the right. (See also the MTK 1990 Klin-Kon flier utilizing the MTK pIqaD)

The trading card company Skybox used this font when they created the Klingon language cards in their Star Trek: The Next Generation trading card collection [year needed]. The Klingon cards themselves detail aspects of Klingon culture and feature pIqaD text and a transliteration and translation provided by Marc Okrand. Some of these cards, notably S7, S8 and card S9 feature pIqaD, which corresponds to the Latin transcription. Other known cards include S19 and S20 (which contain belittling references to Blockbuster, probably an allusion to Blockbuster Video) the season seven card selection s37, s38 and s39 (which featured no actual tlhIngan Hol, but only English and on card S39 Latin, written in the Skybox alphabet), and finally, the Checklist cards for each season's set of cards had the word cards written in Klingon on them when listing the above-mentioned cards.

The script is written in horizontal lines running from left to right, top to bottom, just like English. Klingon can be written with spaces between words (a word being defined as any noun, verb or leftover, plus any prefixes and suffixes attached to it) and punctuation. When this is the case, four punctuation marks are used:

The triangular punctuation marks have been accepted into the common usage of the KLI pIqaD (see above).

Klingon can also be written with no spaces or punctuation at all; this form is more common on the TV shows. As in English, Klingon text can be left-justified, center-justified, or right-justified, and written in vertical columns on banners.

Due to its nature, the "Skybox" Alphabet is ill-suited to writing Klingon, in that ambiguity in the alphabet is apparent, so different words are spelled the same way; these are homographs. The heartiest commendations and the gravest insults could be written identically; however, context would go a long way to disambiguating homographs.

Mandel script

The Klinzhai alphabet

A third script, known as the Klinzhai or Mandel script, was included in The U.S.S. Enterprise Officer's Manual (1980). It holds more closely to the D7 battlecruiser hull markings and is also loosely based upon the conceptual art of Matt Jeffries, TOS set designer.

Its letters map to various letters and digraphs of English, but they have no relation to Marc Okrand's Klingon language. Like the other two alphabets, it is probably written in the same direction as English.

Some fans have suggested this alphabet could be used to write Klingonaase in its native form.[citation needed]

Wikipedia's logo used from 2003 until 2010

Prior to the 2010 logo update, there was a pIqaD r () in the upper right corner of the globe written in the Code2000 font.

See also

References

  1. ^ Symbols attributed to Okuda: the Klingon Language Institute's Klingon FAQ (edited by d'Armond Speers), question 2.13 by Will Martin (August 18, 1994). Symbols incorrectly attributed to Okuda: KLI founder Lawrence M. Schoen's "On Orthography" (PDF), citing J. Lee's "An Interview with Michael Okuda" in the KLI's journal HolQed 1.1 (March 1992), p. 11. Symbols actually designed by Astra Image Corporation: Michael Everson's Proposal....[2].
  2. ^ http://www.kli.org/about-klingon/writing-klingon
  3. ^ a b The Unicode Consortium (August 14, 2001). "Approved Minutes of the UTC 87 / L2 184 Joint Meeting".
  4. ^ Microsoft (November 25, 2015). "Klingon pIqaD use on Bing translate".
  5. ^ Michael Everson (September 18, 1997). "Proposal to encode Klingon in Plane 1 of ISO/IEC 10646-2".
  6. ^ Michael Everson (January 15, 2004). "Klingon: U+F8D0 - U+F8FF".
  7. ^ "Bing Translator". December 25, 2014.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Klingon_scripts&oldid=750091380"