M3 Scout Car

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 187.185.122.154 (talk) at 05:19, 29 August 2016 (→‎Former operators: Added Mexico as a previous operator. (See: English, Adrian J., Armed Forces of Latin America)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

M3A1 Scout Car
M3 Scout Car
TypeArmored car
Place of originUnited States
Service history
WarsWorld War II, Second Sino-Japanese War, Chinese Civil War, 1948 Arab–Israeli War, First Indochina War, Algerian War
Production history
DesignerWhite Motor Company
ManufacturerWhite Motor Company
Specifications
Mass8,900 lb (4.0 t)[1]
Length222 in (5.6 m)[2]
Width80 in (2.0 m)[3]
Height79 in (2.0 m)[3]
Crewdriver + 7

Armor6–13 mm (0.25 inch sides, 0.5 inch windshield)
Main
armament
.50 cal (12.7 mm) M2 Browning machine gun
Secondary
armament
.30 cal (7.62 mm) Browning M1919A4 machine gun
EngineHercules JXD, 320 in3 (5,200 cc),[1] L-head[1] inline 6-cylinder, gasoline
110 hp (82 kW), compression ratio 6.5:1,[1] Zenith Model 29 carburetor[1]
Power/weight19.4 hp/t
Suspension4 x 4 wheel, leaf spring
Operational
range
403 km
Maximum speed 55 mph (89 km/h)[3]

The M3 Scout Car was an armored car in U.S. service during World War II. It was also known as the White Scout Car, after its manufacturer, the White Motor Company. It was used in various roles, including patrol, scouting, command vehicle, ambulance and gun tractor.

History

Design of the vehicle began at the White Motor Company, based in Cleveland, in 1937.[3] It had .25 in (6.4 mm) face-hardened armor,[1] full-time four-wheel drive (with no way to disengage it),[1] four-speed manual constant-mesh (non-synchromesh) transmission (with one reverse gear)[3] and two-speed transfer case, leaf spring suspension,[1] manual steering,[3] and (unusual for the period) vacuum-assisted (power) brakes.[1] The wheelbase was 131 in (3.3 m), tread 65.25 in (1.657 m). The wheels were 8.5 in (220 mm) wide, 20 in (510 mm) diameter, and used standard 12-ply military non-directional tires.[3] Fuel capacity was 30 US gal (110 L).[3]

The original order was for 64 units, all of which were given to the 7th Cavalry Brigade. Eventually, the Army decided to adopt an improved version, designated M3A1. The new version had a longer and wider hull. In front of the bumper an unditching roller was mounted. The M3A1 could carry up to seven infantry and provide fire support with three machine guns - one .50 caliber (12.7 mm) and two .30 caliber (7.62 mm) - mounted on a skate rail around the hull.[1]

Production of the M3A1 started in 1940 and lasted until 1944, with 20,918 vehicles built.[3][1]

The design influenced the later U.S. halftrack designs, such as the M3 halftrack and the post-World War II Soviet BTR-40. The early M2 halftrack copied the armor layout as well as the skate rail machine gun mounts.

Combat history

White scout car in use by British as ambulance.

The M3 and M3A1 first saw combat with the Philippine Army and Philippine Constabulary in the Philippines in 1941 to 1960s[citation needed], and was also used by the cavalry units of the US Army in the North African Campaign and the invasion of Sicily. It was used in traditional cavalry roles, such as scouting and screening; also as an armored command vehicle. By mid-1943, the drawbacks of the design - its open top, poor off-road mobility, and poor armament - were evident. During 1943, most US Army units replaced the M3A1 with the M8 armored car and similar M20 Utility Car. A small number of M3A1s were retained and employed in Normandy. A few M3A1s were used by the US Marine Corps in the Pacific theater, but none saw combat.

The Chinese Nationalist Army was supplied with M3 Scout Cars from the US from 1942. They used the M3 during both the Second Sino-Japanese War and the Chinese Civil War.

The M3A1 was also supplied via lend-lease channels to the Soviet Union (3,034; these vehicles remained in service until at least 1947) and Britain. They were also used to equip Free French Forces, as well as Belgian, Czechoslovak and Polish units. After the war, many vehicles were sold, mostly to Asian and Latin American countries. In Red Army service, the car was used primarily as a reconnaissance vehicle, but also as a gun tractor for the ZIS-3 76-mm field gun. It remained in wide service throughout the war. In British and French service, M3A1s were used as observation vehicles for field artillery observers, as ambulances and as scout vehicles.

A few vehicles were used by Israel in the 1948 Arab–Israeli War. At least one Israeli M3A1 was modified with top armor and a revolving turret. France employed its M3A1s in the First Indochina War and the Algerian War.

By late 1990, the only country to keep the M3A1 in service was the Dominican Republic.

Former operators

Variants

  • M3 (1938) - original variant. 64 units built.
  • M3A1 (1941) - bigger hull.
  • M3A1E1 - had Buda diesel engine. 100 units built.
  • M3A1E2 - had armored roof.
  • M3A1E3 - was fitted with 37 mm Gun M3 on mount T6 / M25. Never reached serial production.
  • M3A1 Command Car (1943) - thicker armor, armed with .50 cal MG.

See also

Notes

  1. ^ a b c d e f g h i j k Berndt, p.162.
  2. ^ Berndt, Thomas. Standard Catalog of U.S. Military Vehicles (Krause Publications, 1993), p.164.
  3. ^ a b c d e f g h i Berndt, p.164.

References

  • Thomas Berndt (March 1993). Standard catalog of U.S. military vehicles, 1940-1965. Motorbooks Intl. ISBN 978-0-87341-223-0..
  • TM 9-705
  • TM 9-1705
  • TM 9-1706
  • TM 9-1709

External links

  • The Encyclopedia of Tanks and Armored Fighting Vehicles, Amber Books, 2002
  • M. Baryatinskiy - US APCs of World War II, Modelist-Konstruktor, Bronekollektsiya 05-2004 (М.Барятинский - Американские бронетранспортеры Второй мировой войны, Mоделист-Конструктор, Бронеколлекция 05-2004).
  • WWII vehicles
  • Photo gallery at OldCMP
  • M3A1 Scout Car Photos at Prime Portal