Traffic calming
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/61/Traffic-calmed_neighbourhood.jpg/220px-Traffic-calmed_neighbourhood.jpg)
Traffic calming uses physical design and other measures to improve safety for motorists, pedestrians and cyclists. It aims to encourage safer, more responsible driving and potentially reduce traffic flow. Urban planners and traffic engineers have many strategies for traffic calming, including narrowed roads and speed humps. Such measures are common in Australia and Europe (especially Northern Europe), but less so in North America. Traffic calming is a calque (literal translation) of the German word Verkehrsberuhigung – the term's first published use in English was in 1985 by Carmen Hass-Klau.[1]
History
In its early development in the UK in the 1930s, traffic calming was based on the idea that residential areas should be protected from through-traffic. Subsequently, it became valued for its ability to improve pedestrian safety and reduce noise and air pollution from traffic.[citation needed]
For much of the 20th century, streets were designed by engineers who were charged only with ensuring smooth motor vehicular traffic flow and not with fostering the other functions of streets. Traffic calming initiatives have grown to consider other design functions as well. For example, it has been shown that car traffic severely impairs the social and recreational functions of public streets. The Livable Streets study by Donald Appleyard (1981)[2] found that residents of streets with light traffic had, on average, three more friends and twice as many acquaintances as the people on streets with heavy traffic which were otherwise similar in dimensions, income, etc.
Measures
Traffic engineers refer to three "E's" when discussing traffic calming: engineering, (community) education, and (police) enforcement. Because neighborhood traffic management studies have shown that residents often contribute to the perceived speeding problem within their neighborhoods, instructions on traffic calming (for example in Hass-Klau et al., 1992[3]) stress that the most effective traffic calming plans entail all three components—that engineering measures alone will not produce satisfactory results.
Engineering measures
Engineering measures involve physically altering the road layout or appearance to actively or passively retard traffic by increasing the cognitive load of driving, in other words, making driving more difficult. Measures include speed humps, chicanes, curb extensions, and living street and shared space type schemes. The town of Hilden in Germany has achieved a rate of 24% of trips being on two wheels, mainly via traffic calming and the use of 30 km/h or 20 mph zones.[4] In 1999, the Netherlands had over 6000 woonerven where cyclists and pedestrians have legal priority over cars and where a motorised "walking speed" limit applies.[5] However, some UK and Irish "traffic calming" schemes, particularly involving road narrowings, are viewed as extremely hostile and have been implicated directly in death and injury to cyclists and pedestrians.[6][7]
A number of visual changes to roads are being made to encourage more attentive driving, reduced speed, reduced crashes, and a greater tendency to yield to pedestrians. Visual traffic calming includes lane narrowings (9-10'), road diets (reduction in lanes), use of trees next to streets, on-street parking, and buildings placed in urban fashion close to streets.
Physical devices include speed humps, speed cushions, and speed tables, sized for the desired speed. Such measures normally slow cars to between 10 and 25 miles per hour (16 and 40 km/h). Most devices are made of asphalt or concrete but rubber traffic calming products are emerging as an effective alternative with several advantages.
Traffic calming can include the following engineering measures, grouped by similarity of method:[8]
- Narrowing: Narrowing traffic lanes makes slower speeds seem more natural to drivers and are less intrusive than other treatments that limit speed or restrict route choice. Narrowing measures include:
- Lane narrowings can be created by extending sidewalks, adding bollards or planters, or adding a bike lane or on-street parking[9].
- Curb extensions (also called bulbouts) narrow the width of the roadway at pedestrian crossings
- Chokers are curb extensions that narrow roadways to a single lane at certain points[10]
- Road diets remove a lane from the street. For example, allowing parking on one or both sides of a street to reduce the number of driving lanes.
- Pedestrian refuges or small islands in the middle of the street can help reduce lane widths.
- Converting one-way streets into two-way streets forces opposing traffic into close proximity, which requires more careful driving.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b6/Construction_of_a_crosswalk_using_polymer_modified_cement_slurry.jpg/220px-Construction_of_a_crosswalk_using_polymer_modified_cement_slurry.jpg)
- Vertical deflection: Raising a portion of a road surface can create discomfort for drivers travelling at high speeds. Both the height of the deflection and the steepness affect the severity of vehicle displacement. Vertical deflection measures include:
- Speed bumps, sometimes split or offset in the middle to avoid delaying emergency vehicles
- Speed humps, parabolic devices that are less aggressive than speed bumps.
- Speed cushions, two or three small speed humps sitting in a line across the road that slow cars down but allows wider emergency vehicles to straddle them so as not to slow emergency response time.
- Speed tables, long flat-topped speed humps that slow cars more gradually than humps
- Raised pedestrian crossings, which act as speed tables, often situated at intersections.
- Speed dips, sunken instead of raised (often seen as double dips in cycleways in The Netherlands)
- Changing the surface material or texture (for example, the selective use of brick, cobblestone, or polymer cement overlay). Changes in texture may also include changes in color to highlight to drivers that they are in a pedestrian-centric zone.
- Horizontal deflection, i.e. make the vehicle swerve slightly. These include:
- Chicanes, which create a horizontal deflection that causes vehicles to slow as they would for a curve.
- Pedestrian refuges again can provide horizontal deflection, as can curb extensions and chokers.
- Block or restrict access. Such traffic calming means include:
- Median diverters to prevent left turns or through movements into a residential area.
- Converting an intersection into a cul-de-sac or dead end.
- Boom barrier, restricting through traffic to authorised vehicles only.
- Closing of streets to create pedestrian zones.
- Other means
Quite often residents have used a variety of homemade devices ranging from faux enforcement camera signs and even faux speed cameras and including dummy police. Some Canadian communities erect flexible bollards in the middle of the street in school zones. The bollards have a sign affixed indicating a 40 km/hr speed limit.
Enforcement and education measures
Enforcement and education measures for traffic calming include:
- Reducing speed limits near institutions such as schools and hospitals (see below)
- Vehicle activated sign, signs which react with a message if they detect a vehicle exceeding a pre-determined speed.
- Embedded pavement flashing-light systems which react to pedestrian presence at crossings to signal drivers and increase awareness.
- Watchman, traffic calming system
Speed limits
Speed reduction has traditionally been attempted by the introduction of statutory speed limits. Traffic speeds of 30 km/h (20 mph) and lower are said to be more desirable on urban roads with mixed traffic.[11] The Austrian city of Graz, which has achieved steady growth in cycling, has applied 30 km/h limits to 75% its streets since 1994.[12] Zones where speeds are set at 30 km/h (or 20 mph) are gaining popularity [13] as they are found to be effective at reducing crashes and increasing community cohesion.[14] Speed limits which are set below the speed that most motorists perceive to be reasonable for the given road require additional measures to improve compliance. Attempts to improve speed limit observance are usually by either education, enforcement or road engineering. "Education" can mean publicity campaigns or targeted road user training.
Speed limit enforcement techniques include: direct police action, automated systems such as speed cameras or vehicle activated signs or traffic lights triggered by traffic exceeding a preset speed threshold. One cycling expert argues for placing direct restrictions on motor-vehicle speed and acceleration performance.[15] An EU report on promoting walking and cycling specifies as one of its top measures comprehensive camera-based speed control using mainly movable equipment at unexpected spots.[16] The Netherlands has an estimated 1,500 speed/red-light camera installations and has set a target for 30 km/h limits on 70% of urban roads. The UK has more than 6,000 speed cameras, which took more than £100 million in fines in 2006/07.[17]
Examples around the world
Europe
Traffic calming has been successfully used for decades in cities across Europe. For example, a living street (sometimes known as home zones or by the Dutch word woonerf, as the concept originated in the Netherlands) towards the end of the 1960s, initially in Delft, is a street in which the needs of car drivers are secondary to the needs other road users; traffic calming principles are integrated into their design. From the Netherlands, the concept spread rapidly to Germany, starting in North Rhine-Westphalia in 1976, and had become very widespread by the early 1980s. The ideas and techniques also spread to the UK towards the end of the 1980s, and practice there was advocated by academics such as Tim Pharaoh and Carmen Hass-Klau. The guidelines published by Devon County Council (of which Tim Pharaoh was the principal author) in 1991 were particularly well received.[18]
North America
More recently, in response to growing numbers of traffic accidents and speeding problems[citation needed], cities across North America have begun creating traffic calming programs to improve safety and liveability on residential streets. Many municipalities create asphalt or concrete measures, although preformed rubber products that are easier to install and consistently meet standardized requirements are becoming increasingly popular.[citation needed] However, after two years, San Francisco's Vision Zero program, which heavily features traffic calming, failed to abate traffic fatalities.[19]
Japan
Various forms of traffic calming are used in Japanese cities, particularly in large cities like Tokyo and Yokohama. Tokyo's narrow streets force automobiles and pedestrians to be close to one another; a common traffic calming technique in Tokyo is to change the surface material and/or texture of the shoulder of narrow roads,[20] which helps define the boundary between cars and pedestrians, while allowing cars to use those spaces to pass oncoming traffic.
Reception and evaluation
A Cochrane Review of studies found that there is evidence to demonstrate the efficacy of traffic calming measures in reducing traffic-related injuries and may even reduce deaths. However, the review found that more evidence is needed to demonstrate its efficacy in low income countries.[21]
According to economic commentator and smart growth critic Randal O'Toole, the main goal of traffic calming is to increase traffic congestion for the sake of social engineering. He claims that some traffic calming measures such as reverting one way roads into two-way roads or creating "bump outs" have increased motor traffic congestion, resulted in more accidents and increased pedestrian fatalities.[22] According to Florida urban planner Dom Nozzi "[c]ongestion is a powerful disincentive for sprawl; sprawl that steamrolls outlying ecosystems. With congestion, the sprawl market wither."[clarification needed][23]
Gallery
-
Curb extension at a mid-block pedestrian crossing
-
Chicane on a one-lane road
-
A diverter replaces a four-leg intersection with two curves, forcing motor vehicles to turn
-
A motorist disregards a directional closure (a two-lane roadway with one terminus converted to one-way access)
-
Two traffic calming measures: speed cushions (the two reddish pads in the road) and a curb extension (marked by the black posts and white stripes)
-
A (rather wide) speed table
See also
References
- ^ Hass-Klau, Carmen (February 1985). "Trying to calm the motor car". Town and Country Planning: 51–53.
- ^ Appleyard, Donald (1981). Livable Streets. CA USA: University of California Berkeley.
- ^ Hass-Klau, Carmen (1992). Civilised Streets: A Guide to Traffic Calming. Brighton, UK: Environmental and Transport Planning. p. 223. ISBN 0-9519620-0-0.
- ^ Learning from Hilden’s Successes Archived 29 October 2008 at the Wayback Machine, Rod King, Warrington Cycle Campaign, August 2004 (Accessed 24 January 2007)
- ^ Home Zones briefing sheet, Robert Huxford, Proceedings, Institution of Civil Engineers, Transport, 135, 45-46, February 1999
- ^ Road Narrowings and Pinch Points Archived 6 December 2007 at the Wayback Machine An Information Sheet, Galway Cycling Campaign, February 2001
- ^ Cyclists at Road Narrowings, by Howard Peel, The Bike Zone. (Accessed 27 January 2007)
- ^ Fitzgerald & Halliday, Inc. Traffic Calming Resource Guide (PDF). South Central Regional Council of Governments.
- ^ "Bigger Isn't Always Better: Narrow Traffic Lanes Make Cities Safer | TheCityFix". TheCityFix. Retrieved 17 April 2017.
- ^ single lane choker ITE
- ^ Speed reduction, traffic calming or cycling facilities: a question of what best achieves the goals?, Michael Yeates, Convenor, Cyclists Urban Speed limit Taskforce, Bicycle Federation of Australia, Velomondial Conference Proceedings, Amsterdam 2000
- ^ The Graz traffic calming model and its consequences for cyclists, Manfred Hoenig, Department of transportation, City Council Graz, Velomondial Conference Proceedings, Amsterdam 2000
- ^ "No Need for Speed: 20s Plenty for Us". Streetfilms. 30 August 2010. Retrieved 9 September 2013.
- ^ "Archived copy" (PDF). Archived from the original (PDF) on 26 April 2012. Retrieved 27 November 2011.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help)CS1 maint: archived copy as title (link) - ^ Enabling and encouraging people to cycle, John Franklin, Paper presented to the Cambridge Cycling Campaign AGM, 5 October 1999
- ^ How to enhance WALking and CYcliNG instead of shorter car trips and to make these modes safer, Deliverable D6 WALCYNG Contract No: UR-96-SC.099, Department of Traffic Planning and Engineering, University of Lund, Sweden 1999
- ^ Gary Cleland (14 March 2008). "Speed cameras collect over £100m in fines". The Daily Telegraph. Telegraph Media Group. Retrieved 18 March 2008.
- ^ Devon County Council, 1991, "Traffic Calming Guidelines
- ^ Will Carruthers. "'Vision Zero' Has Yet To Reduce San Francisco Traffic Fatalities". Hoodline. Retrieved 22 June 2017.
- ^ "(25) Traffic calming in Tokyo 交通静穏化". the tokyo files: urban design 東京の都市デザイン. 7 March 2017. Retrieved 18 February 2018.
- ^ Bunn, F; Collier, T; Frost, C; Ker, K; Steinbach, R; Roberts, I; Wentz, R (2003). "Area-wide traffic calming for preventing traffic related injuries". Cochrane Database of Systematic Reviews (1): CD003110. doi:10.1002/14651858.CD003110.
- ^ Randal O'Toole "Gridlock" p. 32-33
- ^ "Congestion is our friend" Gainesville Sun, 10 February 2008. http://www.walkablestreets.com/congestionfriend.htm
External links
Media related to Traffic calming at Wikimedia Commons