User:Dsalas11/sandbox
This article needs additional citations for verification. (September 2012) |
Developer(s) | Doug Salas |
---|---|
Initial release | July 1985 |
Operating system | MS-DOS |
Type | Bulletin board system |
License | ShareWare |
Website | (defunct) |
Minotaur BBS is a worldwide computer network that is used for communication between bulletin board systems (BBSs). It uses a store and forward system to exchange private (email) and public (forum) messages between the BBSs in the network, as well as other files and protocols in some cases. To save on long distance calling charges when those were expensive, FidoNet used a number of techniques to ensure data was compressed using the then-latest methods of data compression.
As a side-effect of its creation history, FidoNet was based on a number of small interacting programs. Only one of these interacted with the BBS system directly, and was the only portion that had to be ported to support other BBS software. As a result, FidoNet was one of the few networks that was widely supported by almost all BBS software, as well as a number of systems for talking to non-BBS online services.
The rapid improvement in modem speeds during the early 1990s, combined with the rapid decrease in price of computer systems and storage, made BBSes increasingly popular, and FidoNet along with it. By the mid-1990s it was possible to communicate with millions of users on tens of thousands of FidoNet systems around the world. Only UUCP came close in terms of breadth or numbers. The network continues to operate but has shrunk considerably, primarily due to the closing of many BBSes during the increase of popularity of the Internet.
Origin
[edit]FidoNet was originally founded as a non-commercial network in 1984 by Tom Jennings,[1] as a means to network BBSes that used his own "Fido" BBS software.[2] Over time, other BBS software was independently adapted to support the relevant FidoNet protocols and the network became a popular means for computer users to communicate. Until 1994 with the arrival of commercial Internet, Fidonet was the only non Compuserve, Minerva or Prodigy methodology for most of the world's population to send email to and from the Milnet, Arpanet and Minitel networks.
FidoNet organizational structure
[edit]FidoNet is governed in a hierarchical structure according to FidoNet policy, with designated coordinators at each level to manage the administration of FidoNet nodes and resolve disputes between members.[3] Network coordinators are responsible for managing the individual nodes within their area, usually a city or similar sized area. Regional coordinators are responsible for managing the administration of the network coordinators within their region, typically the size of a state, or small country. Zone coordinators are responsible for managing the administration of all of the regions within their zone. The world is divided into six zones, the coordinators of which elect one of themselves to be the "International Coordinator" of FidoNet.
Technical structure
[edit]FidoNet was historically designed to use modem-based dial-up (POTS) access between bulletin board systems, and much of its policy and structure reflected this.
The FidoNet system officially referred only to transfer of Netmail—the individual private messages between people using bulletin boards—including the protocols and standards with which to support it. A netmail message would contain the name of the person sending, the name of the intended recipient, and the respective FidoNet addresses of each. The FidoNet system was responsible for routing the message from one system to the other (details below), with the bulletin board software on each end being responsible for ensuring that only the intended recipient could read it. Due to the hobbyist nature of the network, any privacy between sender and recipient was only the result of politeness from the owners of the FidoNet systems involved in the mail's transfer. It was common, however, for system operators to reserve the right to review the content of mail that passed through their system.
Netmail allowed for the "attachment" of a single file to every message. This led to a series of "piggyback" protocols that built additional features onto FidoNet by passing information back and forth as file attachments. These included the automated distribution of files, and transmission of data for inter-BBS games.
By far the most commonly used of these piggyback protocols was Echomail, public discussions similar to Usenet newsgroups in nature. Echomail was supported by a variety of software that collected up new messages from the local BBSes' public forums (the scanner), compressed it using ARC or ZIP, attached the resulting archive to a Netmail message, and sent that message to a selected system. On receiving such a message, identified because it was addressed to a particular "user", the reverse process was used to extract the messages, and a tosser put them back into the new system's forums.
Echomail was so popular that for many users, Echomail was the FidoNet. Private person-to-person Netmail was relatively rare.
Geographical structure
[edit]FidoNet is politically organized into a tree structure, with different parts of the tree electing their respective coordinators. The FidoNet hierarchy consists of Zones, Regions, Networks, Nodes and Points broken down more-or-less geographically.
The highest level is the Zone, which is largely continent-based:
- Zone 1 is North America
- Zone 2 is Europe, Former Soviet Union Countries, and Israel
- Zone 3 is Australasia
- Zone 4 is Latin America (except Puerto Rico)
- Zone 5 is Africa
- Zone 6 is Asia Israel and the Asian parts of Russia, which are listed in Zone 2) -- On 26 July 2007 Zone 6 was removed, and all remaining nodes were moved to Zone 3.[4]
Each zone is broken down into regions, which are broken down into nets, which consist of individual nodes. Zones 7-4095 are used for "othernets"; groupings of nodes which use Fido-compatible software to carry their own independent message areas without being in any way controlled by FidoNet's political structure. Using un-used zone numbers would ensure that each network would have a unique set of addresses, avoiding potential routing conflicts and ambiguities for systems that belonged to more than one network.
FidoNet addresses
[edit]FidoNet addresses explicitly consist of a Zone number, a Network number (or region number), and a Node number. They are written in the form Zone:Network/Node.[5] The FidoNet structure also allows for semantic designation of region, host, and hub status for particular nodes, but this status is not directly indicated by the main address.
For example, consider a node located in Tulsa, Oklahoma, USA with an assigned node number is 918, located in Zone 1 (North America), Region 19, and Network 170. The full FidoNet address for this system would be 1:170/918. The region was used for administrative purposes, and was only part of the address if the node was listed directly underneath the Regional Coordinator, rather than one of the networks that were used to divide the region further.
FidoNet policy requires that each FidoNet system maintain a nodelist of every other member system. Information on each node includes the name of the system or BBS, the name of the node operator, the geographic location, the telephone number, and software capabilities. The nodelist is updated weekly, to avoid unwanted calls to nodes that had shut down, with their phone numbers possibly having been reassigned for voice use by the respective telephone company.
To accomplish regular updates, coordinators of each network maintain the list of systems in their local areas. The lists are forwarded back to the International Coordinator via automated systems on a regular basis. The International Coordinator would then compile a new nodelist, and generate the list of changes (nodediff) to be distributed for node operators to apply to their existing nodelist.
Routing of FidoNet mail
[edit]In a theoretical situation, a node would normally forward messages to a hub. The hub, acting as a distribution point for mail, might then send the message to the Net Coordinator. From there it may be sent through a Regional Coordinator, or to some other system specifically set up for the function. Mail to other zones might be sent through a Zone Gate.
For example, a FidoNet message might follow the path:
- 1:170/918 (node) to 1:170/900 (hub) to 1:170/0 (net coordinator) to 1:19/0 (region coordinator) to 1:1/0 (zone coordinator). From there, it was distributed 'down stream' to the destination node(s).
Originally there was no specific relationship between network numbers and the regions they reside in. In some areas of FidoNet, most notably in Zone 2, the relationship between region number and network number are entwined. For example, 2:201/329 is in Net 201 which is in Region 20 while 2:2410/330 is in Net 2410 which is in Region 24. Zone 2 also relates the node number to the hub number if the network is large enough to contain any hubs. This effect may be seen in the nodelist by looking at the structure of Net 2410 where node 2:2410/330 is listed under Hub 300. This is not the case in other zones.
In Zone 1, things are much different. Zone 1 was the starting point and when Zones and Regions were formed, the existing nets were divided up regionally with no set formula. The only consideration taken was where they were located geographically in respect to the region's mapped outline. As net numbers got added, the following formula was used.
Region number X 20
Then when some regions started running out of network numbers, the following was also used.
Region number X 200
Region 19, for instance, contains nets 380-399 and 3800-3999 in addition to those that were in Region 19 when it was formed.
Part of the objective behind the formation of local nets was to implement cost reduction plans by which all messages would be sent to one or more hubs or hosts in compressed form (ARC was nominally standard, but PKZIP is universally supported); one toll call could then be made during off-peak hours to exchange entire message-filled archives with an out-of-town uplink for further redistribution.
In practice, the FidoNet structure allows for any node to connect directly to any other, and node operators would sometimes form their own toll-calling arrangements on an ad-hoc basis, allowing for a balance between collective cost saving and timely delivery. For instance, if one node operator in a network offered to make regular toll calls to a particular system elsewhere, other operators might arrange to forward all of their mail destined for the remote system, and those near it, to the local volunteer. Operators within individual networks would sometimes have cost-sharing arrangements, but it was also common for people to volunteer to pay for regular toll calls either out of generosity, or to build their status in the community.
This ad-hoc system was particularly popular with networks that were built on top of FidoNet. Echomail, for instance, often involved relatively large file transfers due to its popularity. If official FidoNet distributors refused to transfer Echomail due to additional toll charges, other node operators would sometimes volunteer. In such cases, Echomail messages would be routed to the volunteers' systems instead.
The FidoNet system was best adapted to an environment in which local telephone service was inexpensive and long-distance calls (or intercity data transfer via packet-switched networks) costly. Therefore, it fared somewhat poorly in Japan, where even local lines are expensive, or in France, where tolls on local calls and competition with Minitel or other data networks limited its growth.
Points
[edit]As the number of messages in Echomail grew over time, it became very difficult for users to keep up with the volume while logged into their local BBS. Points were introduced to address this, allowing technically savvy users to receive the already compressed and batched Echomail (and Netmail) and read it locally on their own machines.
To do this, the FidoNet addressing scheme was extended with the addition of a final address segment, the point number. For instance, a user on the example system above might be given point number 10, and thus could be sent mail at the address 1:170/918.10.
In real-world use, points are fairly difficult to set up. The FidoNet software typically consisted of a number of small utility programs run by manually adjusted scripts. Reading and editing the mail required either a "sysop editor" or a BBS be run locally.
In North America (Zone 1) points were used only briefly, and even then only to a limited degree. Dedicated offline mail reader programs such as Blue Wave, Squiggy and Silver Xpress (OPX) were introduced in the mid 1990s, and quickly rendered the point system obsolete. Many of these packages supported the QWK offline mail standard.
In other parts of the world, especially Europe, this was different. Contrary to North America where local calls usually are free, in Europe local calls are mostly metered and so there was an incentive to keep the duration of the calls as short as possible. Point software employs standard compression (ZIP, ARJ etc.) and so keeps the calls down to a few minutes a day at most.
In Europe (Zone 2) pointing became very popular. Many regions distribute a pointlist in parallel with the nodelist. The pointlist segments are maintained by Net- and Region Pointlist Keepers and the Zone Point List Keeper assembles them into the Zone pointlist. At the peak of FidoNet there were over 120,000 points listed in the Z2 pointlist. Listing points is on a voluntary basis and not every point is listed, so how many points there really were is anybody's guess. As of June 2006, there are still some 50,000 listed points. Most of them are in Russia and Ukraine.
Technical specifications
[edit]FidoNet contained several technical specifications for compatibility between systems. The most basic of all was FTS-0001, with which all FidoNet systems were required to comply as a minimal requirement. FTS-0001 defined:
- Handshaking - the protocols used by mailer software to identify each other and exchange meta information about the session.
- Transfer protocol (XMODEM) - the protocols to be used for transferring files containing FidoNet mail between systems.
- Message format - the standard format for FidoNet messages during the time which they were exchanged between systems.
Other specifications that were commonly used provided for echomail, different transfer protocols and handshake methods (e.g.: Yoohoo/Yoohoo2u2, EMSI), file compression, nodelist format, transfer over reliable connections such as the Internet (Binkp), and other aspects.
Zone mail hour
[edit]Since computer bulletin boards historically used the same telephone lines for transferring mail as were used for dial-in human users of the BBS, FidoNet policy dictates that at least one designated line of each FidoNet node must be available for accepting mail from other FidoNet nodes during a particular hour of each day.[6]
"Zone Mail Hour," as it was named, varies depending on the geographic location of the node, and was designated to occur during the early morning. The exact hour varies depending on the time zone, and any node with only one telephone line is required to reject human callers. In practice, particularly in later times, most FidoNet systems tend to accept mail at any time of day when the phone line is not busy, usually during night.
FidoNet deployments
[edit]Most FidoNet deployments were designed in a modular fashion. A typical deployment would involve several applications that would communicate through shared files and directories, and switch between each other through carefully designed scripts or batch files. However, monolithic software that encompassed all required functions in one package is available, such as D'Bridge. Such software eliminated the need for custom batch files and is tightly integrated in operation. The preference of deployment was that of the operator and there were both pros and cons of running in either fashion.
Arguably the most important piece of software on a DOS-based Fido system was the FOSSIL driver, which was a small device driver which provided a standard way for the Fido software to talk to the modem.[7] This driver needed to be loaded before any Fido software would work. An efficient FOSSIL driver meant faster, more reliable connections.
Mailer software was responsible for transferring files and messages between systems, as well as passing control to other applications, such as the BBS software, at appropriate times. The mailer would initially answer the phone and, if necessary, deal with incoming mail via FidoNet transfer protocols. If the mailer answered the phone and a human caller was detected rather than other mailer software, the mailer would exit, and pass control to the BBS software, which would then initialise for interaction with the user. When outgoing mail was waiting on the local system, the mailer software would attempt to send it from time to time by dialing and connecting to other systems who would accept and route the mail further. Due to the costs of toll calls which often varied between peak and off-peak times, mailer software would usually allow its operator to configure the optimal times in which to attempt to send mail to other systems.
BBS software was used to interact with human callers to the system. BBS software would allow dial-in users to use the system's message bases and write mail to others, locally or on other BBSes. Mail directed to other BBSes would later be routed and sent by the mailer, usually after the user had finished using the system. Many BBSes also allowed users to exchange files, play games, and interact with other users in a variety of ways (i.e.: node to node chat).
A scanner/tosser application, such as FastEcho, FMail, TosScan and Squish, would normally be invoked when a BBS user had entered a new FidoNet message that needed to be sent, or when a mailer had received new mail to be imported into the local messages bases. This application would be responsible for handling the packaging of incoming and outgoing mail, moving it between the local system's message bases and the mailer's inbound and outbound directories. The scanner/tosser application would generally be responsible for basic routing information, determining which systems to forward mail to.
In later times, message readers or editors that were independent of BBS software were also developed. Often the System Operator of a particular BBS would use a devoted message reader, rather than the BBS software itself, to read and write FidoNet and related messages. One of the most popular editors in 2008 was GoldED+. In some cases FidoNet nodes, or more often FidoNet points, had no public bulletin board attached, and existed only for the transfer of mail for the benefit of the node's operator. Most nodes in 2009 had no BBS access, but only points, if anything.
The original Fido BBS software, and some other FidoNet-supporting software from the 1980s, is no longer functional on modern systems. This is for several reasons, including problems related to the Y2K bug. In some cases, the original authors have left the BBS or shareware community, and the software, much of which was closed source, has been rendered abandonware.
Several DOS based legacy FidoNet Mailers such as FrontDoor, Intermail, MainDoor and D'Bridge from the early 1990s can still be run today under Windows without a modem, by using the freeware NetFoss Telnet FOSSIL driver, and by using a Virtual Modem such as NetSerial. This allows the mailer to "Dial" an IP address or hostname via Telnet, rather than dialing a real POTS phone number. There are similar solutions for Linux such as MODEMU (modem emulator) which has limited success when combined with DOSEMU (DOS emulator). Mail Tossers such as FastEcho and FMail are still used today under both Windows and Linux/DOSEMU.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/07/Qcc-0.57.1xe_master_queue.png/220px-Qcc-0.57.1xe_master_queue.png)
There are several modern Windows based FidoNet Mailers available today with source code, including Argus, Radius, and Taurus. MainDoor is another Windows based Fidonet mailer, which also can be run using either a modem or directly over TCP/IP. Two popular free and open source software FidoNet mailers for Unix-like systems are the binkd (cross-platform, IP-only, uses the binkp protocol) and qico (supports modem communication as well as the IP protocol of ifcico and binkp).
On the hardware side, Fido systems were usually well-equipped machines, for their day, with quick CPUs, high-speed modems and 16550 UARTs, which were at the time an upgrade. As a Fidonet system was usually a BBS, it needed to quickly process any new mail events before returning to its 'waiting for call' state. In addition, the BBS itself usually necessitated lots of storage space. Finally, a FidoNet system usually had at least one dedicated phoneline. Consequently, operating a Fidonet system often required significant financial investment, a cost usually met by the owner of the system.
FidoNet availability
[edit]While the use of FidoNet has dropped dramatically compared with its use up to the mid-1990s, it is still used in many countries and especially Russia and former republics of the USSR.[citation needed] Some BBSes, including those that are now available for users with Internet connections via telnet, also retain their FidoNet netmail and echomail feeds.
Some of FidoNet's echomail conferences are available via gateways with the Usenet news hierarchy using software like UFGate. There are also mail gates for exchanging messages between Internet and FidoNet. Widespread net abuse and e-mail spam on the Internet side has caused some gateways (such as the former 1:1/31 IEEE fidonet.org gateway) to become unusable or cease operation entirely.
FidoNews
[edit]FidoNews is the newsletter of the FidoNet community. Affectionately nicknamed "The Snooze", it is published weekly. It was first published in 1984. Throughout its history, it has been published by various people and entities, including the short-lived International FidoNet Association.
See also
[edit]References
[edit]- ^ Sadofsky, Jason Scott. "BBS: The Documentary". FIDONET Episode. May 21, 2005.
- ^ Scott 2005, At time 5:19 . "Tom Jennings rewrote the Fido BBS program to network with other Fidos. He named this network 'Fidonet'."
- ^ "FidoNet Policy Document: Version 4.07". FidoNet. June 9, 1989. Retrieved 2010-09-30.
- ^ Shenkenberger, Carol (26 July 2007), Felten, Björn (ed.), "Removal of Zone 6", FidoNews, vol. 24, no. 31 (published 30 July 2007), p. 2, retrieved 2010-10-08,
With sadness I have removed the last entry for Zone6 as of this writing. All remaining members have been transitioned to Zone3 as previously determined by Z6 members at large.
- ^ Schuyler 1992, Section 4.0.
- ^ Schuyler 1992, Section 6.0.
- ^ Schuyler 1992, Section 10.0.
- Schuyler, Michael (1992). "The Big Dummy's Guide to FidoNet". FidoNet. Retrieved 2010-09-30.
{{cite web}}
: Unknown parameter|month=
ignored (help) - Scott, Jason (director) (2005). BBS: The Documentary (DVD, Episode 4: "Fidonet"). Boston, MA, USA: Bovine Ignition Systems. OCLC 61156153. Archived from the original on 2008-05-10. Retrieved 2010-08-01.
External links
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- International FidoNet Home Page
- Alternate FidoNet Home Page
- FidoNet Technical Standards Committee Home Page
- FidoNews, the weekly newsletter of the FidoNet community
- International Echolist Home Page
- IFDC FileGate Project
- Fidonet On The Internet (FOTI)
- Fidonet Showcase Project
Category:Virtual communities
Category:Computer-mediated communication
Category:Internet Protocol based network software
Category:Pre–World Wide Web online services
Category:1984 introductions