M4 Sherman: Difference between revisions
Gamenzo577 (talk | contribs) No edit summary Tags: Mobile edit Mobile web edit |
Gamenzo577 (talk | contribs) I a Tags: Mobile edit Mobile web edit |
||
Line 1: | Line 1: | ||
{{Redirect2|M4A2|M4A3|the firearm|Bushmaster M4 Type Carbine} |
{{Redirect2|M4A2|M4A3|the firearm|Bushmaster M4 Type Carbine}} |
||
{{stack begin}} |
{{stack begin}} |
||
{{Infobox weapon |
{{Infobox weapon |
Revision as of 02:29, 30 January 2015
Medium Tank M4 | |
---|---|
![]() An M4A3E8 76 mm armed Sherman tank made during the Second World War. | |
Type | Medium tank |
Place of origin | United States |
Service history | |
In service | 1942–55 (USA) 1945–present (Other countries) |
Used by | United States, and many others (see Foreign variants and use) |
Wars | World War II, Chinese Civil War, Indonesian National Revolution, Greek Civil War, 1948 Arab–Israeli War, Korean War, Revolución Libertadora, Suez Crisis, Indo-Pakistani War of 1965, Six-Day War, Indo-Pakistani War of 1971, Yom Kippur War, 1958 Lebanon crisis, Lebanese Civil War, Cuban Revolution, Nicaraguan Revolution |
Production history | |
Designer | U.S. Army Ordnance Department |
Designed | 1940 |
Manufacturer | American Locomotive Co., Baldwin Locomotive Works, Detroit Tank Arsenal, Federal Machine and Welder Co., Fisher Tank Arsenal, Ford Motor Company, Lima Locomotive Works, Pacific Car and Foundry Company, Pressed Steel Car Company, Pullman-Standard Car Company |
Produced | 1941–45 |
No. built | 49,234[1] |
Variants | See U.S. variants and foreign variants |
Specifications | |
Mass | 66,800 pounds (30.3 tonnes; 29.8 long tons; 33.4 short tons) |
Length | 19 ft 2 in (5.84 m) |
Width | 8 ft 7 in (2.62 m) |
Height | 9 ft (2.74 m) |
Crew | 5 (commander, gunner, loader, driver, co-driver) |
Armor | 3 in (76 mm) maximum |
Main armament | 75 mm M3 L/40 gun (90 rounds) or 76 mm gun M1 (55 rounds) |
Secondary armament | .50 cal Browning M2HB machine gun (300 rounds), 2×.30-06 Browning M1919A4 machine guns (4,750 rounds) |
Engine | Continental R975 C1, air-cooled, radial, gasoline 400 hp (298 kW) at 2,400 rpm M4A4 Model – Chrysler A57 multibank 30 cylinder 21-liter engine. 470 hp at 2,700 rpm. |
Power/weight | 13.5 hp/metric ton (early production, Chrysler A57) 15.7 hp/metric ton (late production, RD-1820) |
Transmission | Spicer[2] manual, synchromesh,[2] 4 forward (plus 1 overdrive)[2] and 1 reverse gear |
Suspension | Vertical Volute Spring Suspension (VVSS) |
Fuel capacity | 175 US gallons (660 litres) |
Operational range | 120 miles (193 km) at 175 U.S. gal (660 L); 80 octane |
Maximum speed | 25 to 30 mph (40 to 48 km/h)[3] |
The M4 Sherman, officially the Medium Tank, M4, was the primary battle tank used by the United States and the other Western Allies in World War II. It proved to be reliable and highly mobile. In spite of being outweighed by the German tanks later in the war, the Sherman was more effective overall than the German Panther according to a US Army Ballistic Research Lab study.[4] Thousands were distributed to the Allies, including the British Commonwealth and the Soviet Union, through the lend-lease program. The M4 was the second most produced tank of the World War II era, after the Soviet T-34.[citation needed] Its role in its parent nation's victory was comparable to that of the T-34.[citation needed] The tank was named after the American Civil War General William Tecumseh Sherman by the British.
The M4 Sherman evolved from the interim M3 Medium Tank,[N 1] which had its main armament in a side sponson mount. The M4 retained much of the previous mechanical design but put the main 75 mm gun in a fully traversing turret, with a gyrostabilizer enabling the crew to fire with reasonable accuracy while the tank was on the move.[5] The designers stressed mechanical reliability, ease of production and maintenance, durability, standardization of parts and ammunition in a limited number of variants, and moderate size and weight. These factors combined with M4 Sherman's then unquestionably superior armor and armament thoroughly outclassed earlier German light and medium tanks of 1939–41. The M4 went on to be produced in very large numbers. It formed the backbone of most offensives by the Western Allies, starting in late 1942.
When the M4 tank arrived in North Africa in 1942, it was clearly superior to both the German long barreled 50 mm gun Panzer III, and the short-barreled 75 mm gun on the Panzer IV. For this reason, the US Army believed the M4 would be adequate to win the war, and no pressure was exerted for further tank development. Logistical and transport restrictions, such as limitations imposed by roads, ports, and bridges, would also complicate the introduction of a more capable but heavier tank.[6][N 2] Tank Destroyer battalions, using vehicles built on the M4 hull and chassis, but with open-topped turrets and more potent, high-velocity guns, also entered widespread use among American army corps. Even by 1944, the bulk of the M4 Shermans kept their dual purpose 75 mm M3.[7] Mobility, mechanical reliability, and superior crew ergonomics supported by growing superiority in fighter-bombers and artillery, and the overall declining position of Germany meant the M4 was more than a match for a foe that had fallen far from their pinnacle.[8]
The relative ease of production allowed huge numbers of the M4 to be produced, and significant investment in tank recovery and repair units paid off with more disabled vehicles being repaired and returned to service. These factors combined to give the Americans numerical superiority in most battles, and many infantry divisions could be provided with their own M4 and TD assets.[N 3] By this stage of the war, German panzer divisions were rarely at full strength, and some U.S. infantry divisions had more fully tracked armored fighting vehicles than the depleted German panzer divisions did, providing a great advantage for the Americans.[9] The Americans also started to introduce the M4A3E8 variant, with improved suspension and a high-velocity 76 mm gun as used on the tank destroyers. As well as equipping the Allies during the war, Shermans - including updated versions - saw combat in many post-war conflicts, including the Korean War, Arab-Israeli Wars, and the Indo-Pakistani War of 1965.[10]
U.S. design prototype
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/89/Shermandriver.jpg/220px-Shermandriver.jpg)
The U.S. Army Ordnance Department designed the Medium Tank M4 as a replacement for the Medium Tank M3. The M3 was an up-gunned development of the M2 Medium Tank of 1939, itself derived from the M2 Light Tank of 1935. The M3 was developed as a stopgap measure until a new turret mounting a 75 mm gun could be devised. While it was a big improvement when tried by the British in Africa against early German tanks, the placement of a 37 mm gun turret on top gave it a very high profile; and the unusual side-sponson mounted main gun, with limited traverse, could not be aimed across the other side of the tank.
Detailed design characteristics for the M4 were submitted by the Ordnance Department on 31 August 1940, but development of a prototype had to be delayed while the final production designs of the M3 were finished and the M3 entered full-scale production. On 18 April 1941, the U.S. Armored Force Board chose the simplest of five designs. Known as the T6, the design was a modified M3 hull and chassis, carrying a newly designed turret mounting the M3 's 75 mm gun. This became the Sherman.[11]
The Sherman's reliability benefited from many features first developed in U.S. light tanks during the 1930s, including vertical volute spring suspension, rubber-bushed tracks, and a rear-mounted radial engine with drive sprockets in front. The designated goals were to produce a fast, dependable medium tank able to support infantry, provide breakthrough striking capacity, and defeat any tank then in use by the Axis nations, though it would later fall short against the much heavier tanks developed by Germany.
The T6 prototype was completed 2 September 1941. Unlike later M4s, the hull was cast and had a side hatch, which was eliminated from production models. The T6 was standardized as the M4 and production began in October.[12]
Doctrine
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/0c/Sherman_tank_and_Horsa_glider.jpg/220px-Sherman_tank_and_Horsa_glider.jpg)
As the US approached entry in World War II, armored employment was doctrinally governed by Field Manual 100–5, Operations (published May 1941, the month following selection of the M4 tank's final design). That FM stated that:
The armored division is organized primarily to perform missions that require great mobility and firepower. It is given decisive missions. It is capable of engaging in all forms of combat, but its primary role is in offensive operations against hostile rear areas.[13]
The M4 was therefore not originally intended as an infantry support tank; in fact, FM 100-5 specifically stated the opposite. It placed tanks in the "striking echelon" of the armored division, and placed the infantry in the "support echelon". The field manual covering the use of the Sherman (FM 17–33, "The Tank Battalion, Light and Medium" of September 1942) devoted one page of text and four diagrams to tank versus tank action (out of 142 pages).[14] This early armored doctrine was heavily influenced by the sweeping early war successes of German blitzkrieg tactics. By the time M4s reached combat in significant numbers, battlefield demands for infantry support and tank versus tank action far outnumbered the occasional opportunities of rear-echelon exploitation.
US doctrine held that anti-tank work was primarily to be done by tank destroyers. Speed was essential in order to bring the tank destroyers from the rear to destroy incoming tanks. This doctrine was not entirely followed in practice as it would create an interval of vulnerability in the armored battalion until tank destroyers moved to the front. Obviously this would make it harder for an armored force to achieve a breakthrough, a main objective of armor, if the enemy had tanks. It would also be easier for an opposing armored force to achieve a breakthrough against an American tank battalion which would not have all of its anti-tank assets at the front during the beginning of any attack.[15] The US tank destroyer doctrine was less relevant in the Pacific where tank versus tank battles were less common and where the lighter Japanese tanks were considerably outmatched by the M4.
U.S. production history
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/8f/M4A1_on_Panzermuseum_Munster.jpg/220px-M4A1_on_Panzermuseum_Munster.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/45/Sherman_Dresden_2.jpg/220px-Sherman_Dresden_2.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e4/M4_Sherman_tank_at_the_Imperial_War_Museum.jpg/220px-M4_Sherman_tank_at_the_Imperial_War_Museum.jpg)
The first production began with the Lima Locomotive Works on the assembly line set for tanks for British use. The first production Sherman was given over to the US Army for evaluation and it was the second tank of the British order that went to London. Named Michael probably after Michael Dewar, head of the British tank mission in the U.S., it was displayed in London and is now an exhibit at Bovington Tank Museum.[16][17]
In World War II, the U.S. Army ultimately fielded 16 armored divisions, along with 70 independent tank battalions; the U.S. Marine Corps also fielded six independent Sherman tank battalions. A third of all Army tank battalions, and all six Marine tank battalions, were deployed to the Pacific Theater of Operations (PTO).[18] Prior to September 1942, President Franklin D. Roosevelt had announced a production program calling for 120,000 tanks for the Allied war effort, which would have created 61 armored divisions.[citation needed] Although the American industrial complex was not affected by enemy aerial bombing nor submarine warfare as was Japan, Germany and, to a lesser degree, Great Britain, an enormous amount of steel for tank production had been diverted to the construction of warships and other naval vessels.[19] Steel used in naval construction amounted to the equivalent of approximately 67,000 tanks; and consequently only about 53,500 tanks were produced during 1942 and 1943.[20]
The Army had seven main sub-designations for M4 variants during production: M4, M4A1, M4A2, M4A3, M4A4, M4A5, and M4A6. These designations did not necessarily indicate linear improvement: for example, A4 was not meant to indicate it was better than the A3. These sub-types indicated standardized production variations, which were in fact often manufactured concurrently at different locations. The sub-types differed mainly in engines, although the M4A1 differed from the other variants by its fully cast upper hull, with a distinctive rounded appearance; the M4A4 had a longer engine system that required a longer hull, a longer suspension system, and more track blocks; the most distinguishing feature of the A4 was the wider spaces between the bogies, accommodating for the longer hull. M4A5 was an administrative placeholder for Canadian production; and the M4A6 had an elongated chassis and additional armor, but fewer than 100 of these were produced.
While most Shermans ran on gasoline, the M4A2 and M4A6 had diesel engines: the M4A2 with a pair of GMC 6–71 straight six engines,[21] the M4A6 a Caterpillar RD1820 radial.[22] These, plus the M4A4, which used the Chrysler A57 multibank engine, were mostly supplied to Allied countries under Lend-Lease.[23] "M4" can refer specifically to the initial sub-type with its Continental radial engine (R-975), or generically, to the entire family of seven Sherman sub-types, depending on context. Many details of production, shape, strength and performance improved throughout production, without a change to the tank's basic model number: more durable suspension units, safer "wet" (W) ammunition stowage, and stronger armor arrangements, such as the M4 Composite, which had a cast front hull section mated to a welded rear hull. British nomenclature differed from that employed by the U.S.
A 24-volt electrical system was used in the M4.[2]
Designation[24] | Main Armament | Hull | Engine |
---|---|---|---|
M4(105) | 105 mm howitzer | welded | gasoline Continental R975 radial |
M4 Composite | 75 mm | cast front welded sides | gasoline Continental R975 radial |
M4A1(76)W | 76 mm | cast | gasoline Continental R975 radial |
M4A2 | 75 mm | welded | GM 6046 diesel (conjoined 6-71s) |
M4A3W | 75 mm | welded | gasoline Ford GAA V8 |
M4A3E2 "Jumbo" | 75 mm (some 76 mm) | welded | gasoline Ford GAA V8 |
M4A3E8(76)W "Easy Eight" | 76 mm | welded | gasoline Ford GAA V8 |
M4A4 | 75 mm | welded lengthened | gasoline Chrysler A57 multibank |
M4A6 | 75 mm | cast front welded sides lengthened | diesel Caterpillar D200A radial |
Early Shermans mounted a 75 mm medium-velocity general-purpose gun. Although Ordnance began work on the Medium Tank T20 as a Sherman replacement, ultimately the Army decided to minimize production disruption by incorporating elements of other tank designs into the Sherman. Later M4A1, M4A2, and M4A3 models received the larger T23 turret with a high-velocity 76 mm M1 gun, which reduced the number of high explosive and smoke rounds carried and increased the number of anti-tank rounds. Later, the M4 and M4A3 were factory-produced with a 105 mm howitzer and a new distinctive mantlet in the original turret. The first standard-production 76 mm gun Sherman was an M4A1, accepted in January 1944, and a number was quickly sent to the Armored Divisions in Europe for the upcoming Operation Cobra, and the first standard-production 105 mm howitzer Sherman was an M4 accepted in February 1944.
In June–July 1944, the Army accepted a limited run of 254 M4A3E2 Jumbo Shermans, which had very thick armor for the front (glacis) plate, sloped somewhat more steeply to eliminate the forward hull entryway bulges on the upper portion of the original glacis plate, and the 75 mm gun in a new, heavier T23-style turret, in order to assault fortifications. The M4A3 was the first to be factory-produced with the option of the horizontal volute spring suspension (HVSS) system, with wider tracks to distribute weight, and the smooth ride of the HVSS with its experimental E8 designation led to the nickname Easy Eight for Shermans so equipped. Both the Americans and the British developed a wide array of special attachments for the Sherman; few saw combat, and most remained experimental. Those that saw action included the bulldozer blade for the Sherman dozer tanks, Duplex Drive for amphibious Sherman tanks, R3 flamethrower for Zippo flame tanks, and the T34 60-tube Calliope 4.5" rocket launcher mountable atop the Sherman's turret. The British variants (DDs and mine flails) formed part of the group of specialized vehicles collectively known as "Hobart's Funnies" (after Percy Hobart, commander of the 79th Armoured Division).
The M4 Sherman's basic chassis was used for all the sundry roles of a modern mechanized force: roughly 50,000 Sherman tanks, plus thousands more derivative vehicles under different model numbers. These included the M10 Wolverine (17pdr SP Achilles, in British service) and M36 tank destroyers; M7B1, M12, M40, and M43 self-propelled artillery; the M32 and M74 "tow truck"-style recovery tanks with winches, booms, and an 81 mm mortar for smoke screens; and the M34 (from M32B1) and M35 (from M10A1) artillery prime movers.
Designation | Manufacture | Total | Date |
---|---|---|---|
M4 | Pressed Steel Car Company Baldwin Locomotive Works American Locomotive Co. Pullman-Standard Car Company Detroit Tank Arsenal |
6,784 | July 1942 – January 1944 |
M4(105) | Detroit Tank Arsenal | 800 | February 1944 – March 1945 |
M4A1 | Lima Locomotive Works Pressed Steel Car Company Pacific Car and Foundry Company |
6,281 | February 1942 – December 1943 |
M4A1(76)W | Pressed Steel Car Company | 3,246 | January 1944 – July 1945 |
M4A2 | Fisher Tank Arsenal Pullman-Standard Car Company American Locomotive Co. Baldwin Locomotive Works Federal Machine and Welder Co. |
8,053 | April 1942 – May 1944 |
M4A2(76)W | Fisher Tank Arsenal Pressed Steel Car Company |
2,915 | April 1944 – May 1945 |
M4A3 | Ford Motor Company | 1,690 | June 1942 – September 1943 |
M4A3(105) | Detroit Tank Arsenal | 500 | May 1944 – June 1945 |
M4A3(75)W | Fisher Tank Arsenal | 3,071 | February 1944 – March 1945 |
M4A3(76)W | Fisher Tank Arsenal Detroit Tank Arsenal |
1,400 | March 1944 – April 1945 |
M4A3E2 | Fisher Tank Arsenal | 254 | June 1944 – July 1944 |
M4A3E8 (76) | Detroit Tank Arsenal Fisher Tank Arsenal |
3,142 | August 1944 |
M4A3E8 (105) | Detroit Tank Arsenal | 2,539 | September 1944 |
M4A4 | Detroit Tank Arsenal | 7,499 | July 1942 – November 1943 |
M4A6 | Detroit Tank Arsenal | 75 | October 1943 – February 1944 |
Service history
This section needs additional citations for verification. (February 2010) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/21/SC180455t.jpg/220px-SC180455t.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e1/8th_shrm.jpg/220px-8th_shrm.jpg)
Allocation
During World War II, approximately 19,247 Shermans were issued to the US Army and about 1,114 to the US Marine Corps.[27] The U.S. also supplied 17,184 to Great Britain (some of which in turn went to the Canadians and the Free Poles), while the Soviet Union received 4,102[28] and an estimated 812 were transferred to China.[29] These numbers were distributed further to the respective countries' allied nations.
The U.S. Marine Corps used the diesel M4A2 and gasoline-powered M4A3 in the Pacific. However, the Chief of the Army's Armored Force, Lt. Gen. Jacob L. Devers, ordered no diesel-engined Shermans be used by the Army outside the Zone of Interior (the continental U.S.). The Army used all types for either training or testing within the United States but intended the M4A2 and M4A4 (with the A57 Multibank engine) to be the primary Lend-Lease exports.
First combat
The Sherman was being issued in small numbers for familiarization to U.S. armored divisions when there was a turn of events in the Western Desert campaign. Axis forces had taken Tobruk and were advancing into Egypt and the Britain's supply line through the Suez Canal was threatened. The US considered collecting all Shermans together so as to be able to send the 2nd Armored Division under Patton to reinforce Egypt, but delivering the Shermans directly to the British was quicker and 300 had arrived there by September 1942.[16]
The M4A1 Sherman first saw combat at the Second Battle of El Alamein in October 1942 with the British 8th Army. The first U.S. Shermans in battle were M4A1s in Operation Torch the next month. At this time, Shermans successfully engaged German Panzer IIIs and Panzer IVs at ranges up to 2,000 yards (1,800 m).[30] Additional M4s and M4A1s replaced M3s in U.S. tank battalions over the course of the North African campaign.
The M4 and M4A1 were the main types in U.S. units until late 1944, when the Army began replacing them with the preferred M4A3 with its more powerful 500 hp (370 kW) engine and 76 mm gun. Some M4s and M4A1s continued in U.S. service for the rest of the war. The first Sherman to enter combat with the 76 mm gun in July 1944 was the M4A1, closely followed by the M4A3. By the end of the war, half the U.S. Army Shermans in Europe had the 76 mm gun. The first HVSS Sherman to see combat was the M4A3E8(76)W in December 1944.
Pacific Theater
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b5/Medium_tank_crosses_Suicide_Creek.jpg/220px-Medium_tank_crosses_Suicide_Creek.jpg)
While combat in the European Theater of Operations (ETO) consisted of high-profile armored warfare, the mainly naval nature of the Pacific Theater of Operations (PTO) relegated it to secondary status for both the Allies and the Japanese. While the US Army fielded 16 armored divisions and 70 independent tank battalions during the war, only a third of the battalions and none of the divisions were deployed to the Pacific Theater.[31] The Imperial Japanese Army (IJA) deployed only their 2nd Tank Division to the Pacific during the war.[32] Armor from both sides mostly operated in jungle terrain that was poorly suited for armored warfare. For this type of terrain, the Japanese and the Allies found light tanks easier to transport and employ.[33]
During the early stages of combat in the Pacific, specifically the Guadalcanal Campaign, the U.S. Marine Corps' M2A4 light tank fought against the equally matched Type 95 Ha-Go light tank; both were armed with a 37 mm main gun, however the M2 (produced in 1940) was newer by five years.[34] By 1943, the IJA still used the Type 95 and Type 97 Chi-Ha medium tanks, while Allied forces were quickly replacing their light tanks with 75 mm-armed M4s.[35] The Chinese in India received 100 M4 Shermans and used them to great effect in the subsequent 1943 and 1944 offensives.
To counter the Sherman,[36] the Japanese developed the Type 3 Chi-Nu and the heavier Type 4 Chi-To; both tanks were armed with 75 mm guns, albeit of different type. Only 166 Type-3's and two Type-4's were built and none saw combat; they were saved for the defense of the Japanese homeland, leaving 1930s vintage light and medium tanks to do battle against 1940s built medium Allied armor.[citation needed]
During these latter years of the war, General Purpose High Explosive (HE) ammunition was preferred, because armor-piercing rounds, which had been designed for penetrating thicker steel, often went through the thin armor of Japanese tanks and out the other side without stopping. Although the high-velocity guns of the tank destroyers were useful for penetrating fortifications, M4s armed with flamethrowers were often deployed, as direct fire seldom destroyed Japanese fortifications.[37][38]
Post–World War II
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e7/Sherman-korea.jpg/220px-Sherman-korea.jpg)
After World War II, the U.S. kept the M4A3E8 Easy Eight in service with either the 76 mm gun or a 105 mm M4 howitzer, being the most advanced type of Sherman that the US developed. The Sherman remained a common U.S. tank in the Korean War. Despite no longer being the primary U.S. tank, it fought alongside the M26 Pershing and M46 Patton. The M4A3E8 Sherman and T-34-85 were comparable and could destroy each other when hit, although the use of High Velocity Armor Piercing shells gave the Sherman a firepower advantage. The Sherman had better optics, which gave it a better chance of scoring a first round hit.[39] The M4A3E8 Sherman, using 76mm HVAP ammunition, destroyed a total of 41 enemy tanks from July-November 1950. The lighter M4A3E8 tank became the preferred US tank in the later phases of the Korean conflict, due to the mechanical reliability of the M4, its ease of maintenance, and its driveability compared to the M26 tank.[40]
The U.S. Army replaced them with M46 Pattons, an improved M26, during the 1950s. The U.S. continued to transfer Shermans to its allies, which contributed to widespread foreign use.
The Israeli Army used M4 Shermans (M4A1) in the Arab-Israeli Conflict of 1956, obtaining them from foreign sources. Before the Six Day War in 1967 erupted, the Israeli Army replaced the 76 mm gun of the M4 Shermans with the French 105 mm gun, re-engined them with Cummins engines and renamed the upgunned Sherman as the Isherman, popularly known as Super Shermans. The Super Sherman tanks, fighting alongside the 105 mm Centurion Sh'ot Kal and M48 Patton tanks, were able to defeat the T34/85, T54/55 series, and IS-3 tanks used by the Egyptian forces in the 1967 Six Day War. [41]
Armament
The gun on the original M4 was the short-barreled medium-velocity 75 mm M3 gun. When it first saw combat in North Africa in late 1942 against the Panzer III and Panzer IV, the Sherman's gun could penetrate the armor of these tanks within 1,000 yd (910 m). U.S. Army Intelligence discounted the arrival of the Tiger I in late 1942 and the Panther tank in 1943, predicting the Panther to be a heavy tank like the Tiger, and doubted they would produce many. There were also reports of relatively small caliber British QF 6 pdr (57 mm) guns being able to destroy the Tiger. However, this was only happening at very close ranges and against the thinner side armor. Due to their misconceptions related to this, and also due to tests that seemed to prove that the 76 mm gun was able to destroy both the Tiger and the Panther, the leadership of Army Ground Forces were not especially concerned by the Tiger. The tests of the 76 mm were later ruled inaccurate, with Eisenhower even remarking he was wrongly told by Ordnance the 76 mm could knock out any German tank. The Army also failed to anticipate the Germans would make the Panther the standard tank of their panzer divisions in 1944, supported by some Tigers.[42]
Despite the Bureau of Ordnance development of new 76 mm and 90 mm anti-tank guns, the Army Ground Forces rejected their deployment on U.S. tanks as unnecessary. Even in 1943, most German armored fighting vehicles (later models of the Panzer IV, StuG III, and Marder III) mounted the 7.5 cm KwK 40. As a result, even weakly armored light German tank destroyers such as the Marder III, which was meant to be a stop-gap measure to fight Soviet tanks in 1942, could destroy Shermans from a distance. The disparity in firepower between the German armored fighting vehicles of 1943 and the 75 mm-armed M4 was the impetus to begin production of 76 mm-armed M4s in April 1944.[43] However, transfer of the tanks to the front started slowly, and most tanks still had 75 mm M3 guns, even by Operation Cobra in July 1944.[44]
The M1A2 76 mm gun could penetrate some 98 mm (3.9 in) of unsloped face hardened armor plate at 2,000 meters (2,200 yd) using M62 APCBC ammunition, about twice the average tank engagement range noted by the Canadians. This was easily enough to reliably penetrate a Panzer IV's glacis, which offered a maximum of about 87 millimetres (3.4 in) of protection. However, the 76 mm was not powerful enough against the upper glacis of a Panther. Due to its 55 degree angle, the Panther's 80 millimetres (3.1 in) upper glacis had a line of sight thickness of 140 mm (5.51 in) with actual effectiveness being even greater. Utilizing standard M79 armor piercing shot, a M4 might only knock out a Panther frontally from point-blank ranges. Therefore, Shermans had to aim for the Panther's weaker turret and mantlet. A 76 mm M1A2 armed Sherman could penetrate the upper frontal hull superstructure of a Tiger I heavy tank from 400 meters (440 yd); although this lessened the gap between the tanks, the Tiger I was capable of knocking a M4 out frontally from over 2,000 meters (2,200 yd).[45] Sherman crews also had concerns about firing from longer ranges, as the Sherman's high-flash powder made their shots easy to spot. Their gun sights were fixed magnification, while German tanks had multiple magnification settings, although Sherman gunners had the use of a secondary unmagnified unity sight which allowed them to acquire targets faster than the German counterparts in practice. In summer 1944, after breaking out of the bocage and moving into open country, U.S. tank units which engaged at longer ranges from German defensive positions sometimes took 50% casualties before spotting where the fire was coming from.[46]
The Sherman was first equipped with the L/40 75 mm M3 Gun, which could penetrate 87 millimetres (3.4 in) of unsloped rolled homogeneous armor at 100 meters (110 yd) and 70 millimetres (2.8 in) at 1,000 meters (1,100 yd) firing the usual M61 round.[47] The average combat range noted by the Americans for tank vs. tank action was 800 meters (870 yd) to 900 meters (980 yd). Conditions later in the war necessitated up-gunning to the 76 mm L/55 M1A2, which could penetrate 143 millimetres (5.6 in) of unsloped rolled homogeneous armor at 100 meters (110 yd) and 97 millimetres (3.8 in) at 1,000 meters (1,100 yd) using the usual M79 round.[48] The M1A2 helped to equalize the Sherman and the Panzer IV in terms of firepower, although the M4 still needed improved ammunition in the form of tungsten rounds to equal the Panther, with its much more powerful 7.5 cm KwK 42 gun. The KwK 42 could penetrate 185 millimetres (7.3 in) at 100 meters (110 yd)[49] and 149 millimetres (5.9 in)[50] at 1,000 meters (1,100 yd) using the usual PzGr.39/42 round. The British-developed Sherman Firefly was an M4 re-gunned with their own, 3-inch (76.2 mm) caliber QF 17 pounder anti-tank gun. The 17 pdr was a 76 mm gun and had a 55 caliber barrel but used a much bigger charge which allowed it to penetrate 140 millimetres (5.5 in) (of RHA sloped at 30 degrees) at 100 meters (110 yd) and 120 millimetres (4.7 in) at 1,000 meters (1,100 yd) using APC Mk.IV shot.[51] This gun allowed the Firefly a firepower equal to that of the Panther, especially with APDS, although the muzzle flash due to unburnt powder from the increased charge left crews momentarily blinded after firing.[9] A US comparison concluded that the 17 pdr gun and turret was generally inferior "to like components" of the M4A3 (76 mm).[52] The sabot 17 pdr rounds also suffered from far greater dispersion than either the American 90 mm or 76 mm guns.[53][54]
The tank destroyer doctrine
General Lesley J. McNair was head of Army Ground Forces. McNair, an artilleryman, championed the tank destroyer (TD) within the U.S. Armored Forces. Tanks were to support the infantry, exploit breakthroughs, and avoid tank-to-tank battles. Enemy tanks were to be engaged by the tank destroyer force, composed of a mix of self-propelled tank destroyers and towed anti-tank guns. U.S. tank destroyers, called "gun motor carriages" (as were any US Army self-propelled armored vehicles mounting an artillery piece of heavy caliber) were similar to tanks but were lightly armored with open-topped turrets. The tank destroyers were supposed to be faster and carry a more powerful anti-tank gun than tanks; armor was sacrificed for speed. The tank destroyer doctrine played a large role in the lack of urgency in improving the firepower of the M4 Sherman, as the emphasis was on its role as infantry support.[55]
McNair approved the 76 mm upgrade to the M4 Sherman and production of the 90 mm gun-armed M36 tank destroyer, but he staunchly opposed development of the T26 and other proposed heavy tanks during the crucial period of 1943 because he saw no "battle need" for them.
In mid-1943, Lt. General Devers, commander of U.S. forces in the European Theater of Operations (ETO), asked for 250 T26s for use in the invasion of France. McNair refused. Devers appealed to General George Marshall, the Army Chief of Staff. Marshall summarily ordered the tanks to be provided to the ETO as soon as they could be produced. Soon after the Normandy invasion, General Dwight D. Eisenhower urgently requested heavy tanks (now designated M26 Pershing), but McNair's continued opposition delayed production. General Marshall intervened again and the tanks were eventually brought into production. However, only a few saw combat on February 25, 1945, too late to have any effect on the battlefield.[56]
Gun development
When the 76 mm gun was first installed in the M4 turret, it was found to unbalance the turret, and the gun barrel was also thought to protrude too far forward, making it more difficult to transport and susceptible to hitting the ground on undulating terrain. Army Ordnance reduced the barrel length by 15 inches (380 mm) (from 57 calibers long to 52), which decreased performance by 10%.[citation needed] Mounting this gun in the original M4 turret proved to be problematic, and so the turret for the aborted T23 tank project was used instead for the definitive production version of the 76 mm M4 Shermans.[57]
Although tests against armor plate suggested the new M1A1 76 mm gun would be adequate, testing against captured Panther tanks was never done. This would have shown the gun could penetrate the gun mantlet and possibly the glacis of the Panther only at point blank or very close ranges.[58] In practice, this meant that despite both the Panther and Sherman being classed and produced as "medium tanks" by their respective forces, the Panther was basically invincible in frontal engagements against the Sherman at anything but point blank range. Once this was discovered, it was insisted that the superior mobility of the open-topped tank destroyers would obviate the deficiency in firepower; this assumption proved to be flawed as well, as most tank combat occurred in confined urban or bocage areas[citation needed] where mobility was highly limited and the light armor and lack of overhead cover of the TDs was readily exploited by Panzerschreck- and Panzerfaust-armed infantry troops.
The 90 mm gun developed by U.S. Ordnance could not be easily installed on the M4 but was installed on the open-turreted M36 tank destroyer and was the main gun for the T26 tank project (which eventually became the M26 Pershing). An attempt to upgrade the M4 Sherman by installing the 90 mm T26 turret on a M4A3 hull in April 1944 was halted after realizing it could not go into production sooner than the T26 and would likely delay T26 development.[59]
In testing prior to the invasion of Normandy, the new 76 mm gun on the M4 Sherman was found to have an undesirably large muzzle blast that kicked up dust from the ground and obscured vision for further firing. The addition of a muzzle brake solved this problem by directing the blast sideways. It also had a much weaker high-explosive shell than the existing 75 mm gun. Standard Army doctrine at the time emphasized the importance of the infantry support role of the tank, and the high-explosive round was considered more important. Hence the 76 mm M4 was not initially accepted by various US Armored Division commanders, even though a number had already been produced and were available. All of the US Army M4s deployed initially in Normandy in June 1944 had the 75 mm gun.[60]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/75/British_Sherman_Firefly_Namur.jpg/220px-British_Sherman_Firefly_Namur.jpg)
The British were more astute in their anticipation of the future development of German armor — beginning development of a 3-inch (76 mm) anti-tank gun even before its 57 mm predecessor entered service and planning for its use in tanks that would replace the M4. Out of expediency driven by delays in their new tank designs, they mounted this high-powered Ordnance QF 17-pounder gun in a standard 75 mm M4 Sherman turret. This conversion became the Sherman Firefly. The 17 pounder still could not penetrate the glacis plate of the Panther but it could penetrate the Panther's gun mantlet at over 2,500 yards (2,300 m);[61][62] moreover it was estimated it could penetrate the Tiger I's front from 1,900 yards (1,700 m) well before the Tiger would penetrate the Sherman's glacis, which at 30 degrees was invulnerable to the 8.8 cm KwK 36.[63][64] Late in 1944, the British began to produce tungsten-cored sabot rounds for the 17 pounder gun, which could readily penetrate the armor of even the Tiger II, but these rounds were not as accurate as standard rounds and not generally available.
In late 1943, the British offered the 17 pounder to the U.S. Army for use in their M4 tanks. General Devers insisted on comparison tests between the 17 pounder and the U.S. 90 mm gun (even though the 17 pounder could be mounted in a standard M4 turret while the 90 mm gun needed a new turret). The tests were finally done on March 25 and May 23, 1944; they seemed to show that the 90 mm gun was equal to or better than the 17 pounder. By then, production of the 76 mm M4 and the 90 mm M36 tank destroyer were both underway and U.S. Army interest in the 17 pounder waned.
Fighting against Panther tanks in Normandy quickly demonstrated the need for better anti-tank firepower, and the 76 mm M4s were deployed to First Army units in July 1944. General George S. Patton's Third Army were initially issued 75 mm M4s and accepted 76 mm M4 Shermans only after the Battle of Arracourt against Panther tanks in late September 1944.[65]
High-Velocity Armor Piercing (HVAP) ammunition, standardized as M93, became available in August 1944 for the 76 mm gun. The projectile contained a tungsten core penetrator surrounded by a lightweight aluminum body, which gave it a higher velocity and more penetrating power. The increased penetration of HVAP allowed the 76 mm gun M1 to match the Panther's 7.5 cm KwK 42 APCR shot. [66] However, its performance was heavily degraded by sloped armor such as the Panther's glacis, which was immune to HVAP rounds necessitating shots to be aimed at the mantlet and turret front.[67] Because of tungsten shortages, HVAP rounds were constantly in short supply. Priority was given to U.S. tank destroyer units; most Shermans carried only a few rounds and some units never received any.[68]
After the heavy tank losses of the Battle of the Bulge, in January 1945, General Eisenhower asked that no more 75 mm M4s be sent to Europe: only 76 mm M4s were wanted.[69]
Interest in mounting the British 17-pounder in U.S. Shermans flared anew. In February 1945, the U.S. Army began sending 75 mm M4s to England for conversion to the 17-pounder. Approximately 100 conversions were completed by the beginning of May. By then, the end of the war in Europe was clearly in sight, and the U.S. Army decided the logistic difficulties of adding a new ammunition caliber to the supply train was not warranted. None of the converted 17-pounder M4s were deployed by the U.S., and it is unclear what happened to most of them, although some were given to the British as part of Lend-Lease.[70]
The higher-velocity 76 mm M1 gun gave Shermans anti-tank firepower at least equal to most of the German vehicles they encountered, particularly the Panzer IV, and StuG III. However, with a regular AP (Armor Piercing shot) ammunition (M79), the 76 mm might knock out a Panther only at point blank range with a shot to the upper glacis, at close range with a shot to its mantlet, or at long range with a shot its flank. At long range, the Sherman was outmatched by the Panther's 75 mm gun, which could easily penetrate the Sherman's armor from all angles. This, and the US Army's usual offensive tactical situation, contributed to losses suffered by the U.S. Army in Europe.[71]
The M4 was criticized by its crews for inability to pivot turn (turn in place), limiting its usefulness in urban warfare against pivot-turning Panthers.[72] This deficiency was partially compensated by the faster traverse of its turret.
Miscellaneous
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a8/Ronson_flame_tank_Iwo_Jima.jpg/290px-Ronson_flame_tank_Iwo_Jima.jpg)
The Sherman was one of the first widely produced tanks to feature a gyroscopic stabilized gun and sight. The stabilization was only in the vertical plane, as the mechanism could not slew the turret. The stabilizer was sufficient to keep the gun within 1/8th of a degree, or 2 mils while crossing moderately rough terrain at 15 miles per hour (24 km/h). This gave a hit probability of 70% on enemy tanks at ranges of 300 yards (270 m) to 1,200 yards (1,100 m).[73] The utility of the stabilization is debatable, with some saying it was useful for its intended purpose, others only for using the sights for stabilized viewing on the move.[74] Some operators disabled the stabilizer.[citation needed]
The 75 mm gun also had an effective canister round that functioned as a large shotgun. In the close fighting of the French bocage, the 2nd Armored Division tanks used Culin Hedgerow Cutters fitted to their tanks to push three tanks together through a hedgerow. The flank tanks would clear the back of the hedgerow on their side with canister rounds while the center tank would engage and suppress known or suspected enemy positions on the next hedgerow. This approach permitted surprisingly fast progress through the very tough and well-defended hedgerows in Normandy. Over 500 sets of these were fitted to US armored vehicles, and many fitted to various British tanks (where they were called "Prongs").
A variant of the M4 Sherman was armed with the 105 mm M4 howitzer, which provided even more powerful high-explosive armament. This variant was employed in six-vehicle "assault gun" platoons in armored battalions to provide close fire support and smoke. The 105 mm-armed variants were of limited use against enemy tanks due to the poor anti-armor performance of the howitzer, which was not intended to fight other tanks, though a high explosive anti-tank (HEAT) round for the 105 mm howitzer was available for self-defense.
The 75 mm gun had a white phosphorus shell originally intended for use as an artillery marker to help with targeting. M4 tank crews discovered that the shell could also be used against the Tiger and Panther—when the burning white phosphorus adhered to the German tanks, their excellent optics would be blinded and the acrid smoke would get sucked inside the vehicle, making it difficult or impossible for the crew to breathe. This, and the fear of the fire spreading inside the tank, would sometimes cause the crew to abandon the tank.[75] There were several recorded instances where white phosphorus shells defeated German tanks in this fashion.[76]
Armor
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/bc/M4A4-Sherman-latrun-6.jpg/220px-M4A4-Sherman-latrun-6.jpg)
The steel frontal turret armor of the M4 ranged from 64–76 mm (2.52–2.99 in).[77] The M4's gun mantlet was also protected by 76 mm (2.99 in) of armor[77] sloped at 30 degrees from the vertical,[78] The turret side armor was 50 mm (1.97 in) a 5-degree angle[78] while the rear was 64 mm (2.52 in) at a 90-degree angle and the turret roof was 25 mm (0.98 in) thick.[79] The frontal hull armor was 51 mm (2.01 in) thick.[77][79] The Sherman's upper hull was angled at 56 degrees, while the lower half of the hull was curved.[79] The hull sides were 38–45 mm (1.50–1.77 in) thick,[78][80] and vertical.[79] The hull rear—which protected and was offset from the rear radiator on some versions—was 38 mm (1.50 in) of steel ranging from 0 to 22 degrees to the vertical, depending on the variant.[81] The hull roof was 25 mm (0.98 in).[79]
Upgraded Shermans with the T23 turret and new 76 mm gun had upgraded frontal hull armor that was 64 mm (2.52 in) thick and sloped at 47 degrees from the vertical, or in the case of the M4A1(76)W, curved from 37 to 55 degrees from the vertical, with the large majority of the plate sitting closer to a 55° angle.[81] The lower hull was 51–108 mm (2.01–4.25 in) thick and sloped at 56 to 0 degrees from the vertical, respectively.[48] The turret was 64 mm (2.52 in) thick, sitting at 40 to 45 degrees from the vertical.[81] The frontal turret was further protected by an unsloped 89 mm (3.50 in) gun mantlet.[48] The turret sides were 64 mm (2.52 in) ranging from 0 to 13 degrees to the vertical, while the turret rear was unsloped.[48]
The armor of the M4 was effective against most early war anti-tank weapons,[77] but needed a compound angle to resist later German tank and anti-tank guns. Early versions had unfortunate shot traps, locations where the effect of slope was greatly reduced, located just in front of the driver and assistant driver. The KwK 40 7.5 cm L/48 tank gun that armed late war versions of the Panzer IV could penetrate a Sherman's armor up to a range of 1,370[82]–1,500 meters, and larger guns could penetrate past 2,000 meters (2,200 yd).[83] Regardless of this vulnerability, historian John Buckley has stated the M4 was "moderately superior" to the relatively small but older Panzer IV. A Wa Pruef 1 report estimated [84] that with the M4 angled 30 degrees sidewards, the Sherman's glacis was impervious to the Tiger's 8.8 cm KwK 36 L/56[85] and that the Panther with its 7.5 cm KwK 42 L/70 would have to close in to 100 meters (110 yd) in the same situation.[86] Although the later-model medium and heavy tanks were greatly feared, Buckley opined "The vast majority of German tanks encountered in Normandy were either inferior, or at least, merely equal to the Sherman."[87]
Progressively thicker armor was added to hull front and turret mantlet in various improved models. Many had an additional rectangular patch on each side protecting ammunition stowage, others had an additional slanted plate in front of each front crew hatch. Field improvisations included placing sandbags, spare track links, concrete, wire mesh, or even wood for increased protection against shaped-charge rounds. While mounting sandbags around a tank had little effect against high-velocity anti-tank gunfire it was thought to provide standoff protection against HEAT weapons, primarily the German Panzerfaust anti-tank grenade launcher and Panzerschreck anti-tank rocket launcher. By 1945, it was rare to see a Sherman without any field improvisations. In the only study known to have been done to test the use of sandbags, on March 9, 1945, officers of the 1st Armored Group tested standard Panzerfaust 60s against sandbagged M4s; shots against the side blew away the sandbags and still penetrated the side armor, whereas shots fired at an angle against the front plate blew away some of the sandbags but failed to penetrate the armor. Earlier, in the summer of 1944, General Patton, informed by his ordnance officers that sandbags were useless and that the machines' chassis suffered from the extra weight, had forbidden the use of sandbags. Following the clamor for better armor and firepower after the losses of the Battle of the Bulge, Patton ordered extra armor plates salvaged from knocked-out American and German tanks welded to the front hulls of tanks of his command. Approximately 36 of these up-armored M4s were supplied to each of the armored divisions of the Third Army in the spring of 1945.[88]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/40/M4A3E2_Sherman_Jumbo_75mm_gun.jpg/220px-M4A3E2_Sherman_Jumbo_75mm_gun.jpg)
The M4A3E2 Sherman Jumbo variant had frontal armor almost twice as effective as the Tiger I. Its 102 millimetres (4.0 in) thick glacis was angled at 47 degrees from vertical, which resulted in a glacis 150 millimetres (5.9 in) LOS thick and over 180 millimetres (7.1 in) effective,[89] proof against all German tank guns. It also had no protrusions from the forward crew hatchways which the original M4 designs possessed, sponson sides uparmored to 76.2 millimetres (3.00 in), a significantly thicker transmission casing, a thicker welded mantlet and a thicker cast turret for the main gun. Intended for the assault to break out of the Normandy beachhead, it was initially armed with the 75 mm although the gun mount was designed for the 76 mm allowing the 76 mm to be easily mounted in the field. It arrived in Europe in the Fall of 1944 and was employed throughout the remainder of the fighting. They were highly successful and 254 of them were built.[90]
The M4 had a hatch on the hull bottom to dispose of spent shell casings and to provide an emergency escape route. In the Pacific, Marines used this Sherman feature in reverse to recover wounded infantry under fire. Combat experience indicated the single hatch in the three-man turret to be inadequate for timely evacuation, so Ordnance added a loader's hatch beside the commander's. Later M4s also received redesigned hull hatches for better egress.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/39/Yanks_of_60th_Infantry_Regiment_advance_into_a_Belgian_town_under_the_protection_of_a_heavy_tank._-_NARA_-_531213.tif/lossy-page1-220px-Yanks_of_60th_Infantry_Regiment_advance_into_a_Belgian_town_under_the_protection_of_a_heavy_tank._-_NARA_-_531213.tif.jpg)
Research conducted by the British No. 2 Operational Research Section, after the Normandy campaign, concluded that a Sherman would be set alight 82% of the time following an average of 1.89 penetrations of the tank's armor; in comparison they also concluded the Panzer IV would catch fire 80% of the time following an average of 1.5 penetrations, the Panther would light 63% of the time following 3.24 penetrations, and the Tiger would catch fire 80% of the time following 3.25 penetrations.[91] John Buckley, using a case study of the British 8th and 29th Armoured Brigades found that of their 166 Shermans knocked out in combat during the Normandy campaign, 94 were burnt out; 56.6%. Buckley also notes that an American survey carried out concluded that 65% of tanks burnt out after being penetrated.[92] United States Army research proved that the major reason for this was the stowage of main gun ammunition in the sponsons above the tracks. A U.S. Army study in 1945 concluded that only 10–15 percent of wet-stowage Shermans burned when penetrated, compared to 60–80 percent of the older dry-stowage Shermans.[93]
At first a partial remedy to ammunition fires in the M4 was found by welding 1-inch-thick (25 mm) appliqué armor plates to the sponson sides over the ammunition stowage bins, though there was doubt that these had any effect. Later models moved ammunition stowage to the hull floor, with additional water jackets surrounding the main gun ammunition stowage. The practice, known as wet stowage, reduced the chance of fire after a hit to about 15%.[94] The Sherman gained grim nicknames like "Tommycooker" (by the Germans, who referred to British soldiers as "Tommies"; a tommy cooker was a World War I-era trench stove). The British took to calling it the "Ronson"[95] Fuel fires occasionally occurred, but such fires were far less common and less deadly than ammunition fires.[93] In many cases the fuel tank of the Sherman was found intact after a fire. Tankers described "fierce, blinding jets of flame," which is inconsistent with gasoline-related fires.[92]
The armor of the Sherman and Panther were compared in a report to General Eisenhower at SHAEF, among anecdotes reported by US servicemen:
I have actually seen ricochets go through an M4 at 3000 yards.... I have seen HEAT fired from a 105mm Howitzer at a Mark V [Panther] at 400 yards. The track was hit and damaged, and a direct hit exploded on the turret which only chipped the paint.[96]
Mobility
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a0/Volutespring.jpg/220px-Volutespring.jpg)
In its initial specifications for the replacement tank for the M3 Medium Tank, the U.S. Army restricted the Sherman's height, width, and weight so that it could be transported via typical bridges, roads, railroads and landing craft without special accommodation. This greatly aided the strategic, logistical, and tactical flexibility and mobility of all Allied armored forces using the Sherman.
The Sherman had good speed both on- and off-road. Off-road performance varied. In the desert, the Sherman's rubber tracks performed well. In the confined, hilly terrain of Italy, the Sherman could often cross terrain that some German tanks could not.
Albert Speer recounted in his autobiography Inside the Third Reich
On the southwestern front (Italy) reports on the cross country mobility of the Sherman have been very favorable. The Sherman climbs mountains our tank experts consider inaccessible to tanks. One great advantage is that the Sherman has a very powerful motor in proportion to its weight. Its cross-country mobility on level ground is, as the 26th Panzer Division reports, definitely superior to that of our tanks[97]
However, while this may have held true compared with the first generation German tanks such as the Panzer III and Panzer IV, comparative testing with the second generation German tanks (Panther and Tiger) conducted by the Germans at their Kummersdorf testing facility, as well as by the U.S. 2nd Armored Division, proved otherwise.
Lieutenant Colonel Wilson M. Hawkins of the 2nd AD wrote the following comparing the US M4 Sherman and German Panther in a report to Allied headquarters:
It has been claimed that our tank is the more maneuverable. In recent tests we put a captured German Mark V [Panther] against all models of our own. The German tank was the faster, both across country and on the highway and could make sharper turns. It was also the better hill climber.[98]
This was backed up in an interview with Technical Sergeant Willard D. May of the 2nd AD who commented:
I have taken instructions on the Mark V [Panther] and have found, first, it is easily as maneuverable as the Sherman; second the flotation [ability to avoid bogging down] exceeds that of the Sherman.[98]
Staff Sergeant and Tank Platoon Sergeant Charles A. Carden completes the comparison in his report:
The Mark V [Panther] and VI [Tiger] in my opinion have more maneuverability and certainly more flotation. I have seen in many cases where the Mark V and VI tanks could maneuver nicely over ground where the M4 would bog down. On one occasion I saw at least 10 Royal Tigers [Tiger II] make a counter attack against us over ground that for us was nearly impassable.[98]
U.S. crews found that on soft ground such as mud or snow, the narrow tracks gave poor (i.e., high) ground pressure compared to wide-tracked second-generation German tanks such as the Panther and the Tiger — these two tanks used the so-called Schachtellaufwerk overlapping, and interleaved roadwheel suspension system pioneered on German half-track vehicles before World War II, but which were troublesome in bad weather conditions and when repairs were needed. Soviet experiences were similar, and tracks were modified to give better grip in the snow. The U.S. Army issued extended end connectors, "grousers" or "duckbills" to add width to the standard tracks as a stopgap solution. Duckbills began to reach front-line tank battalions in July 1944, and were original factory equipment for the heavy M4A3E2 Jumbo to compensate for the extra weight of armor. The M4A3E8 "Easy Eight" Shermans and other late models with wider-tracked HVSS suspension and twinned road wheels on each axle — rather than the single road wheel of the VVSS suspension designs — corrected these problems but formed only a small proportion of the tanks in service even in 1945.
U.S. variants
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2e/M4A1_to_M4A3_tank_animation.gif/220px-M4A1_to_M4A3_tank_animation.gif)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/85/M32-ARV-batey-haosef-2.jpg/220px-M32-ARV-batey-haosef-2.jpg)
Vehicles that used the M4 chassis or hull:
- 3in Gun Motor Carriage M10 a.k.a. Wolverine - tank destroyer
- 90 mm Gun Motor Carriage M36 – tank destroyer
- 105 mm Howitzer Motor Carriage M7B1 a.k.a. Priest – self-propelled artillery
- 155 mm Gun Motor Carriage M12 – self-propelled gun, paired in service with the Cargo Carrier M30 (also derived from the Sherman)
- 155/203/250 mm Motor Carriages – 155 mm self-propelled artillery (armed with the Long Tom artillery piece), 8 in. (203 mm) HMC M43, 250 mm (10-inch) MMC T94, and Cargo Carrier T30
- Sexton 88mm (25 Pndr) self-propelled gun and variants
- Flame Tank Sherman – M4A3R3 Zippo, M4 Crocodile, and other flame-throwing Shermans
- Rocket Artillery Sherman – T34 Calliope, T40 Whizbang, and other Sherman rocket launchers
- Amphibious tanks – Duplex Drive (DD) swimming Sherman. A British variant used by U.S. forces.
- Engineer tanks – D-8, M1, and M1A1 dozers, M4 Doozit, Mobile Assault Bridge, and Aunt Jemima and other mine-clearers
- Recovery tanks – M32 and M74 Tank Recovery Vehicles
- Artillery tractors – M34 and M35 prime movers
Foreign variants and use
The Sherman was extensively supplied through Lend-Lease to Britain, the Soviet Union and the Free French. Britain received 17,287 Shermans of various models. The Soviet Union received 4,035 M4A2 Shermans. The Free French was the third largest recipient, taking 657 Shermans 1943-1944. 57 Shermans were delivered to other nations.[99]
After World War II, Shermans were supplied to some NATO armies; Shermans were used by U.S. and allied forces in the Korean War.
Shermans also went to Israel.[100] The Israeli up-gunned 75 mm M-50 and 105 mm armed M-51 Super Shermans are remarkable examples of how a long obsolete design can be upgraded for front-line use.[101] They saw combat in the 1967 Six-Day War, fighting Soviet World War II-era armor like the T34/85, and also in the 1973 Yom Kippur War, proving effective even against newer, heavier Soviet tanks like the T-54 and T-55.
Users
Afghanistan
Albania
Argentina
Australia
Austria
Bangladesh
Belgium
Brazil
Canada
Chile
China
Cuba
Denmark
Egypt
Ethiopia
Free France
Nazi Germany (Captured in WWII[102])
Greece
Iran
Iraq
Israel
Ireland
Italy (Captured in WWII and post war)
Indonesia
Japan (Captured tanks and post-war supply)
Jordan
Laos
Lebanon
Malta
Mexico
Myanmar
Netherlands
New Zealand
Nicaragua
Norway
Oman
Pakistan
Paraguay
Peru
Philippines
Poland
Portugal
Republic of China
Saudi Arabia
Syria
South Africa
South Korea
Soviet Union
Sri Lanka
Turkey
Uganda
Uruguay
United Kingdom
United States of America
Vietnam
Yemen
Yugoslavia
See also
- SCR-508
- Detroit Arsenal Tank Plant
- List of land vehicles of the U.S. Armed Forces
- Vickers Tank Periscope MK.IV
- SOMUA S35, believed to have been a key inspiration for the Sherman's hull shape[citation needed]
- Allied technological cooperation during World War II
- G-numbers
- M50 Super Sherman
Tanks of comparable role, performance and era
- Australia Sentinel
- British Cromwell
- Canadian Ram II
- German Panzer IV
- German Panther - comparable to M4A3(76) or M4A1(76)
- Hungarian Turán III
- Italian Carro Armato P 40
- Japanese Type 3 Chi-Nu
- Soviet T-34
References
- Notes
- ^ Also known by the British service names "Grant" and "Lee".
- ^ An Army Ground Forces policy statement of November 1943 concluded thus: "The recommendation of a limited proportion of tanks carrying a 90 mm gun is not concurred in for the following reasons: The M4 tank has been hailed widely as the best tank of the battlefield today ... There appears to be no fear on the part of our forces of the German Mark VI (Tiger) tank. There can be no basis for the T26 tank other than the conception of a tank-vs.-tank duel-which is believed to be unsound and unnecessary."[6]
- ^ By 1944 a typical U.S. infantry division had as semi-permanently attached units an M4 Sherman battalion, a TD battalion, or both.
- Citations
- ^ Zaloga (Armored Thunderbolt) p. 57
- ^ a b c d Berndt, p. 195.
- ^ Zaloga 1993, p. 19
- ^ Zaloga, Steven (2008). Panther vs. Sherman: Battle of the Bulge 1944. Osprey Publishing Ltd. pp. 67–69. ISBN 9781846032929.
- ^ Zaloga, Stephen J. Panther vs Sherman: Battle of the Bulge 1944. Osprey Publishing, 2008, p. 28.
- ^ a b AGF policy statement. Chief of staff AGF. November 1943. MHI
- ^ Zaloga, Steven (2008). Panther vs. Sherman: Battle of the Bulge 1944. Osprey Publishing Ltd. p. 72. ISBN 9781846032929.
- ^ Doyle, Hilary; Zaloga, Steven. "Operation Think Tank Part 4". YouTube/. Wargaming.net. Retrieved 23 October 2014.
- ^ a b "Tank Tactics: From Normandy to Lorraine" by Roman Jarymowycz [page needed]
- ^ Hunnicutt 1978[page needed]
- ^ AFV database
- ^ Canavan, Michael J., Opening Salvo: M4A1 Sherman Tank, Avalon Hill / Wizards.com
- ^ War Department (22 May 1941). FM 100–5, Field Service Regulations, Operations (reprint). Washington, DC: GPO. OCLC 49969146. Retrieved 5 September 2013.
- ^ FM 17–33 (PDF)
- ^ Tank Tactics: From Normandy to Lorraine by Roman Jarymowycz, Ch. 5 "Creating North American Panzer Armies"
- ^ a b Fletcher p93
- ^ M4A1 Tank Medium, Bovington Tank Museum
- ^ Zaloga (Armored Thunderbolt) p. 24 & 301
- ^ Zaloga (Armored Thunderbolt) pp. 22, 24 & 28
- ^ Zaloga (Armored Thunderbolt) p. 24
- ^ Berndt, Thomas. Standard Catalog of U.S. Military Vehicles (Krause Publications, 1993), pp. 192–3.
- ^ Berndt, pp.192–3.
- ^ Berndt, pp. 190 & 192–3.
- ^ W = ammunition stowage system
- ^ Siemers, Cary (2014). "United States' M4 medium tank production, Sherman". wwiivehicles.com. Retrieved 9 January 2014.
- ^ Conners, Chris (2000–2013). "Medium Tank M4A1 Sherman". Retrieved 9 January 2014.
- ^ Zaloga, Armored Thunderbolt, p. 332
- ^ Zaloga, Armored Thunderbolt, p. 57
- ^ Hunnicutt p. 166
- ^ Moran, Nicholas. "Sherman PR 42". World of Tanks. Wargaming.net. Retrieved 9 November 2014.
- ^ Zaloga (Armored Thunderbolt) p. 301
- ^ Zaloga (Japanese Tanks) p. 37
- ^ Zaloga, pp.15 & 33
- ^ Zaloga, p. 40
- ^ Zaloga, p.34
- ^ Zaloga, Stephen Japanese Tanks 1939-45 pp. 21–22
- ^ Zaloga, Armored Thunderbolt, "Bunker Blasters" p. 215–217 and 318 caption.
- ^ Zaloga (M3/M5 Stuart) p. 35, "tank guns could not penetrate bunkers"
- ^ Zaloga, Stephen (2001). M26/M46 Pershing Tank 1943–53. City: Osprey Publishing (UK). ISBN 1-84176-202-4.[page needed]
- ^ Zaloga, Stephen. T-34-85 vs M26 Pershing: Korea 1950. Osprey Publishing (UK), 2010. pp. 74-77. ISBN 978-1-84603-990-4
- ^ Zaloga, Steven. Armour of the Middle East Wars 1948-1978. Vanguard 19. London: Osprey, 1981. pp. 12-24. ISBN 0 85045 388 7
- ^ Zaloga 2008, p. 94-97
- ^ Zaloga p.115-116
- ^ Zaloga 2008. p. 93
- ^ Tigerfibel supplements
- ^ Tank Tactics: From Normandy to Lorraine by Roman Jarymowycz, Ch. 13 "'Who killed Tiger?' The Great Scandal"
- ^ www.tarrif.net – M4A3 Sherman[self-published source]
- ^ a b c d http://www.tarrif.net – M4A3 Sherman(76)W E8 HVSS Sherman[self-published source][full citation needed]
- ^ at 0 degrees 50% of hits World War II Ballistics: Armor and Gunnery. Albany NY: Overmatch Press. 2001.
- ^ 0 degrees and 50% of hits World War II Ballistics: Armor and Gunnery. Albany NY: Overmatch Press. 2001.
- ^ Cruiser Tank Sherman VC "Firefly"[self-published source]
- ^ Moran, Nicholas. "US Firefly Part 3". World of Tanks. Retrieved 10 October 2014.
- ^ Moran, Nicholas. "US Firefly Part 1". World of Tanks. Retrieved 24 October 2014.
- ^ Moran, Nicholas. "US Army Anti-Armor Firing Tests Of 1944". World of Tanks. Wargaming.net. Retrieved 24 October 2014.
- ^ Zaloga 2008, "McNair's Folly" pp. 72–77
- ^ Zaloga 2008, pp. 120–125, 287
- ^ Zaloga pp. 106–108, 115–116
- ^ Zaloga 2008 pp. 124–125
- ^ Zaloga 2008, pp. 126–130
- ^ Zaloga 129–131
- ^ Jentz, Thomas; Doyle, Hilary (1995). Germany's Panther Tank. Schiffer Publishing, Ltd. p. 129. ISBN 0887408125.
- ^ Zaloga 2008, p. 132-135
- ^ Jentz, Thomas; Doyle, Hilary (1993). Tiger I Heavy Tank 1942-45. Osprey Publishing, Ltd. p. 20. ISBN 1855323370.
{{cite book}}
: line feed character in|title=
at position 7 (help) - ^ Jentz 1997 p. 13-14 German Army Wa Pruef 1 report dated October 5, 1944, and British Department of Tank Design, Experimental Report A.T.No.252 Part II, trials conducted March 16–22, 1945
- ^ Zaloga 2008, pp. 166, 193
- ^ Nicholas, Moran. "The Chieftain's Hatch: US Firefly Part 3". World of Tanks. Wargaming.net. Retrieved 28 October 2014.
- ^ Nicholas, Moran. "The Chieftain's Hatch: US Firefly Part 3". World of Tanks. Wargaming.net. Retrieved 28 October 2014.
- ^ Zaloga 2008, pp. 194–195
- ^ Zaloga 2008, pp. 268–269
- ^ Zaloga 2008, pp. 276–277
- ^ "12th Army Group, Report of Operations (Final After Action Report)" Vol. XI, Wiesbaden, Germany, 1945, pp. 66–67.
- ^ Green 2005, p. 88.
- ^ "Ohio State Engineer", vol 28 number 4 (March 1945) pages 10,11,23.
- ^ "M4 Sherman at War" by Michael Green, James D. Brown, Zenith Press; 1st edition (February 15, 2007), pp. 87–88.
- ^ Zaloga 2008 p. 182
- ^ Schneider 2004, p. 303
- ^ a b c d Zaloga (1993), p.14
- ^ a b c Reid, p. 215
- ^ a b c d e Hart, p. 27
- ^ Buckley, p. 110
- ^ a b c American Fighting Vehicle Database - M4 Sherman
- ^ Reid, p. 374
- ^ Buckley, p. 126
- ^ Jentz, Thomas; Doyle, Hilary (1993). Tiger 1 Heavy Tank 1942-45. Osprey Publishing. p. 20. ISBN 1855323370.
- ^ Jentz, Thomas. Tiger I Heavy Tank 1942-45. Osprey Publishing. p. 19.
- ^ Jentz 1995:128
- ^ Buckley, p. 117
- ^ Zaloga (2008), p. 279–284
- ^ WO 185/118, DDG/FV(D) Armor plate experiments
- ^ Hunnicutt, R.P. Sherman: A History of the American Medium Tank. Presidio Press. pp. 289–290.
- ^ Copp, pp. 399–406
- ^ a b Buckley, p. 127
- ^ a b Zaloga (2008), p. 116-118
- ^ Buckley page 128
- ^ Zaloga, Steve Armored Thunderbolt: The U.S. Army Sherman in World War II, Stackpole Books, 2008, p. 168
- ^ Maj. Gen I. D. White. "Comparison of US equipment with Similar German Equipment" Report for Supreme Commander Allied Expeditionary Force. 20 March 1945
- ^ Speer, Albert (2009). Inside the Third Reich. Ishi Press. p. 2nd note on chapter 17. ISBN 978-0-923891-73-2.
- ^ a b c "M4 SHERMAN AT WAR" by Michael Green & James D. Brown [Page 53]
- ^ Zaloga, Steve, Armored Thunderbolt: The U.S. Army Sherman in World War II, Stackpole Books (2008), ISBN 0811704246, Appendix C, p. 346
- ^ M-50 Sherman
- ^ Gelbart 1996:45
- ^ Lexikon der Wehrmacht - Beutefahrzeuge
Further reading
- Berndt, Thomas. Standard Catalog of U.S. Military Vehicles. Iola, WI: Krause Publications, 1993. ISBN 0-87341-223-0.
- Buckley, John (2006) [2004]. British Armour in the Normandy Campaign 1944. London: Taylor & Francis. ISBN 0-415-40773-7. OCLC 154699922.
- Cooper, Belton Y (1998). Death Traps: The Survival of an American Armored Division in World War II. Novato, CA: Presidio. ISBN 0-89141-670-6.
- Copp, Terry, ed. (2000). Montgomery's Scientists: Operational Research in Northwest Europe. The work of No.2 Operational Research Section with 21 Army Group June 1944 to July 1945. ISBN 0-9697955-9-9.
- Green, Michael (2005). Panzers at War. City: Zenith Press. ISBN 978-0-7603-2152-2.
- Green, Michael (2007). M4 Sherman at War. City: Zenith Press. ISBN 978-0-7603-2784-5.
- Hart, Stephen Ashley (2007). Sherman Firefly Vs Tiger: Normandy 1944 (Duel): Normandy 1944. Osprey Publishing. ISBN 1-84603-150-8.
- Hernandez Cabos, Rodrigo; Prigent, John (2001). M4 Sherman. Osprey. ISBN 1-84176-207-5.
- Hunnicutt, R. (1978). Sherman. San Rafeal: Taurus Enterprises. ISBN 978-0-89141-080-5.
- Jentz, Thomas (1997). Germany's Tiger Tanks Tiger I & II: Combat Tactics. Atglen, PA: Schiffer Military History. ISBN 0-7643-0225-6.
- Reid, Brian (2005). No Holding Back. Robin Brass Studio. ISBN 1-896941-40-0.
- Schneider, Wolfgang (2004). Tigers in Combat I. Mechanicsburg, PA: Stackpole Books; 2nd edition, originally published 2000 by J.J. Fedorowicz Publishing, Inc. Winnipeg, Canada. ISBN 0-8117-3171-5.
- Wilbeck, Christopher (2004). Sledgehammers: Strengths and Flaws of Tiger Tank Battalions in World War II. The Aberjona Press. ISBN 978-0-9717650-2-3.
- Zaloga, Steven (1993). Sherman Medium Tank 1942–1945. UK: Osprey Publishing. ISBN 978-1-85532-296-7.
- Zaloga, Steven (1999). M3 & M5 Stuart Light Tank 1940–45. UK: Osprey Publishing. ISBN 978-1-85532-911-9.
- Zaloga, Steven (2008). Armored Thunderbolt. Mechanicsburg, PA: Stackpole Books. ISBN 978-0-8117-0424-3.
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Interview with Soviet Tanker Dmitriy Loza detailing the comparative utility of Shermans in the 6th Guards Tank Army at www.iremember.ru
- U.S. 75mm M61 Tank Round – WWII
- M4 Sherman Photos and Walk Arounds on Prime Portal
- Sherman Register
- OnWar
- AFV Database
- World War II vehicles
- israeli-weapons.com
- About.com Military History
- M4 Sherman