This is an old revision of this page, as edited by DevvyDog(talk | contribs) at 06:29, 8 July 2024(Added the term "14L" with more citations and information.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 06:29, 8 July 2024 by DevvyDog(talk | contribs)(Added the term "14L" with more citations and information.)
This article contains a list of terms, jargon, and slang used to varying degrees by railfans and railroad employees in the United States and Canada. Although not exhaustive, many of the entries in this list appear from time to time in specialist, rail-related publications. Inclusion of a term in this list does not necessarily imply its universal adoption by all railfans and railroad employees, and there may be significant regional variation in usage.
The protection given by a locomotive engineer to an employee working near, between, or under cars to which the locomotive is coupled, via a three-step process:
Fully apply independent brake.
Set reverser to neutral.
Turn off generator field (or notify the ground employee, depending on company-specific rules and locomotive type, that protection is provided).[1][2]
Procession of a train past a stop signal with verbal permission from the dispatcher.[4] Derives from Rule 241, which is used to grant such permission under certain rule sets.[5]
251 (US)
On most Class I railroads, this rule references the tradition of "right hand" running on double track (or more) main lines. Trackage signaled for 251 operation typically has full speed signals and speed limits on the right main, and reduced speed (dwarf) signals and speed limits on the left main.
261 (US)
On most Class I railroads, this rule references bi-directional operation on any mainline track. Multi track mainlines signaled for 261 operation have full speed signals and speed limits on all available tracks as conditions warrant. Rule 261 operation is the default operating procedure on single track mainlines.
14L, 14(l), or 19b
Refers to the "Long Long Short Long" or "- - o -" Horn pattern used by US and Canadian railroads at grade crossings. The term "14L" is derived from Rule 14(l) in the Canadian Rail Operating Rules and Consolidated Code of Operating Rules.[6][7] "19b" is derived from Rule 19(b) in the Northeast Operating Rules Advisory Committee, mainly used by railroads located in the Northeast United States.[8]
A system of railroad equipment designed to ensure safety by monitoring locomotive and train locations, providing analysis and reporting, and automating track warrants and similar orders.[13]
An Amfleet passenger car, named because the car shape is a rounded stainless steel tube[17]
Angel seat (US)
A cupola-style caboose with an angel seat above The second level seats on a cupola-style caboose[18][19]
Angle bar
A metal plate that joins the ends of rails in jointed track[20]
Amshack
A small shelter that serves as a train station for Amtrak trains in a small town. Normally, there are no manned services offered at these small stations.[21] More generally, any station built under Amtrak's Standard Stations Program in the 1970s and 1980s.[22][23]
A consist of autorack carsA specialized freight car for transporting automobiles[25][27]
B
B-Boat
A GE B23-7, B30-7, or B36-7 locomotive. By analogy with U-boat, since with the Dash 7 line, the "B" or "C" moved to the beginning of the designation.[28]
A rail car that has a mechanical defect, and is sometimes set out on a spur to be repaired. The statement, "I am going to set out a bad order" is railroader slang for a bathroom break (usually a "number two" type break).
Bandit
A nickname for Chicago, Milwaukee, St. Paul and Pacific Railroad (Milwaukee Road) locomotives after the railroad was sold to the Soo Line Railroad. Soo Line covered up the Milwaukee Road name and logo on the orange locomotives with black paint, causing them to resemble bandits.[29] Also often applied to similarly patched, second-hand locomotives, especially if the patches are crudely applied.[30]
A nickname for Conrail due to the medium blue livery that their locomotives were painted[35][36]
Big G
A Guilford Rail System locomotive showing the Big G paint scheme A nickname for Guilford Rail System, in reference to the large "G" emblem on their locomotives and boxcars[37]
The "Big Hole" is the Emergency position of the engineer's air brake valve.
When the engineer makes an emergency brake application, he moves his brake valve to the emergency, "Big Hole", position. The result of putting the air brake valve into the Big Hole position will cause the instantaneous total loss of all brake air pressure in the train line which causes the brakes on all train cars and engines to automatically apply creating an emergency stop of the train. This action is called, "Big Holing It".
If a train line is "broken" either to an unexpected uncoupling or a train line hose rupture caused by a derailment or other accident, a "Big Hole" condition occurs which causes the total loss of all brake air pressure in the train line which automatically causes an emergency stop of the train.
A Southern Pacific locomotive (post-1959 gray and red paint scheme where the nose of the diesel locomotive was painted in scarlet red),[16] or the Amtrak Phase I paint scheme: A reddish-orange nose and then the Amtrak Chevron logo on the side of the locomotive.
Bluebonnet
One of two Santa Fe paint schemes. The standard freight scheme from 1972 until the BNSF Railway merger was dark blue with yellow on the front, with the same color division as the warbonnet scheme. It is also known as Yellowbonnet. Bluebonnet can also mean a warbonnet unit with only the red painted over, resulting in a silver and blue locomotive; this was used on passenger engines transferred to freight service after the formation of Amtrak.[16]
Bluebirds
There are two different uses of this term.
1. A nickname given to GE U34CH locomotives because they were delivered in dark blue and silver NJDOT paint
2. A nickname given to Alco PA locomotives of the Nickel Plate Road due to their distinctive royal blue and white paint scheme.
Blueliners
A nickname given to the Reading Railroad's heavyweight MU cars, in reference to the bright blue and white paint scheme they wore in later years before being sold to SEPTA
A train crew member who performs railcar and track management, often a single job description along with switchman ("brakeman/switchman"). A brakeman manually activated brakes on railroad cars before the advent of air brakes.
A small hut at one end of a railway wagon to protect the brakeman from the elements
Buda Car
A type of inspection car or speeder, typically streamlined, manufactured by Buda Engine Co. They were sometimes built out of an ordinary automobile body, with flanged wheels added. They were driven by small engines from 30 to 200 horsepower.[52]
Buffer Car or Spacer Car
A railroad car, typically empty, placed between a train's locomotives and cars containing hazardous materials, particularly unit trains carrying oil.[53]
A BNSF Railway B UnitA cabless booster locomotive, controlled via multiple unit from a cab-equipped A unit, sometimes equipped with limited controls for hostling[16][55][56]
Butthead or Butt Head
GM Electro-Motive Division model 'MP' or 'SW' endcab switching locomotives[57]
C
C Light (US)
A single lamp attached to wayside signals with a "C" plate bolted to it. The aspect is Rule 280a - Clear to Next Interlocking. This aspect is only seen in the Eastern United States on rail lines operating Cab Signal Systems. Cab signal lines only have wayside signals at interlockings and diamonds. When a locomotive does not have working cab signals, the dispatcher will activate the C light (indication is a flashing white lamp) to notify the crew that they may proceed to the next interlocking at the speed permitted by the wayside signal's aspect. A locomotive without cab signals that does not receive a C light at an interlocking may proceed past the signal not exceeding Restricted Speed, or with a Form D or other Track Warrant authorization.
A locomotive which derives its structural strength from a bridge-truss design framework in the sides and roof, which cover the full width of the locomotive
Cabbage
Former EMD F40PH locomotives with the diesel engine removed, and a roll-up baggage door installed in the center of the carbody; used as cab/baggage cars in Amtrak push-pull service. Portmanteau of 'cab' and 'baggage'.[59]
A nickname given to a 12-axled Baldwin diesel locomotive. Also a tender (as on a steam engine) with seven axles (two axles in a truck, followed by five fixed axles).[64]
Railroad police detective. The term is derived from the fact that railroad police have to walk on ballast, which is sometimes known as "cinders" (before dieselization, many railroads used spent steam locomotive cinders for ballast)[68][69]
Circus loading
Loading trailers on flatcars sequentially from the end; the standard method of loading in early piggyback service[70]
Changing the front destination signs on buses or trains, sometimes including rollsign changes.
Coffin car
A nickname for a passenger car with an engineer's cab. Also known as a cab car or control car. So named due to the alleged additional danger posed to passengers in such cars (which are pushed by the heavier trailing locomotive) in frontal collisions.[73]
The person in charge of a train and its crew. On passenger trains, a conductor is also responsible for tasks such as assisting passengers and collecting tickets.
Consist
The group of rail vehicles making up a train, or more commonly a group of locomotives connected together for multiple-unit (MU) operation[76][77]
Control point (CP) (US)
An interlocking, or the location of a track signal or other marker with which dispatchers can specify when controlling trains[65]
Rail lines without wayside (train control) signals[86]
Darth Vader
Darth Vader signalsThe lens hood on a modern style of railroad signals, due to its vague resemblance to the helmet of Darth Vader from Star Wars[87][88]
A locomotive or multiple locomotives in the middle or at the end of a train. Can either be manned or automatically controlled. Manned units are preferred to be called "helpers" by railfans and some railroad personnel.[92]
A configuration in which two steam locomotives are coupled head-to-tail in order to haul a heavy train up a long or steep hill. In the present day, double headers (and occasionally triple headers) are done primarily on large passenger trains or as a show for railfans.
A method of braking in which the motors on the locomotive wheels generate electric power from the momentum of the moving train, and this power is dissipated through resistor grids as heat[94][95]
Dynamite the train or dynamite
Causing an emergency brake application (whether intentional or not)[96][97]
E
Eight and sand
Term used to wish train crews well wishes and quick uneventful journey. Comes from notch 8 (the highest power setting of modern locomotive throttles), and to apply sand to prevent wheel slipping.[98]
Elephant style
Three Burlington Northern Railroad locomotives coupled elephant style A consist of multiple locomotives with all units facing forward, resembling the nose-to-tail train of elephants in a circus parade[99][100]
Emergency
When a train has made a full brake application due to adverse event, or has lost its train air due to a defective valve (a "kicker"), or a broken air line or train separation. The train crew will normally declare that they are "in emergency" over the train radio, thus warning other trains and the dispatcher that there is a problem.[101][102]
An ETD on a container trainA form of electronic caboose with a flashing red light mounted on the end of a train. Also monitors various train functions such as brake-pipe pressure, motion, and GPS location.[103][104][105]
The Code of Federal Regulations (49 CFR 392.10) requires drivers of vehicles carrying passengers for hire, school buses carrying students, and vehicles carrying hazardous materials to stop before crossing the tracks. State or local laws or regulations establish which crossings may be posted as "exempt" from this requirement to stop; except when a train, locomotive, or other railroad equipment is approaching or occupying the highway-rail grade crossing, or the driver's view is blocked.[108]
The agency which oversees rail operation regulations and safety requirements for U.S. freight, passenger and commuter rail operations[104]
Filet
Converting a double-stack container train to single stack by removing the top layer of containers, allowing the rest of the train to proceed along track that lacks double stack clearance. The removed containers can be trucked to local destinations. The opposite process is toupee.[111]
Flares
The EMD SD45, with its dynamic brake blisters and radiators that distinctively flare from the top of the unit. Also Flare 45. Both forms distinguish the SD45 from the SD45-2 and SD45T-2, which lack flared radiators.[112] The GP40X and SD70M models also bear similar flared radiators.[citation needed]
A train of loaded flatcarsA type of rolling stock, which can be a flat-bottomed car with no sides on which freight (including intermodal containers) can be stacked. A bulkhead is a flatcar with walls on the front and rear. A center-beam bulkhead is a bulkhead flatcar with an additional wall dividing one side of the flatcar from the other, but still without any sides.[104]
Flatback
Industry slang for trailer-on-flatcar service in the 1970s, especially in the trade journal Railway Age[113]
Foamer
A railfan, particularly one whose enthusiasm appears excessive. They figuratively "foam at the mouth" while railfanning.[114]
Flying switch or drop (US)
The practice of uncoupling a locomotive from a car in motion and running over a switch, whereupon an employee on the ground lines the switch to divert the car onto an adjacent track.[115][116] Once commonplace, this practice has led to several lawsuits against railroad companies and is now strictly prohibited due to the high risk to life and property.[117][118][119][120][121]
From "generator set", a locomotive that uses multiple high-speed diesel engines and generators, rather than a single medium-speed diesel engine and a single generator. Sometimes confused with Green Goat locomotives; the only similarities between the two types are their outward appearance and that both are designed to reduce air pollution and fuel consumption.[126]
GEVO
A nickname for GE Evolution Series locomotives, in reference to the GEVO-12 engine used in those units[127]
Ghost
An unpainted (but usually numbered) locomotive that has not yet been painted with company's livery. A ghost locomotive can be either in transport from the locomotive builder to the paint shop, or an unpainted locomotive may have been placed in revenue service without livery due to power shortage or, in rare cases, pushed out of the factory preemptively due to an impending labor strike. May also refer to an EMD E8, #4261, belonging to the Boston commuter agency, MBTA. This locomotive was known for its unique, plain light-gray paint.[citation needed]
Goat
A locomotive used in yard switching service[38][71][125]
A gondola carA type of rolling stock with a flat bottom and relatively low sides, used to haul material such as ore or scrap, and loaded and unloaded from the top which may be covered or uncovered[125][128]
A demonstrator Green Goat locomotive A type of "hybrid" switching locomotive utilizing a small diesel engine and a large bank of rechargeable batteries[129]
A double rail section of track, sometimes found in train yards and on bridges to prevent derailments or limit damage caused by derailments by having rail on both sides of the wheel flange. Also found on curves with a tight radius, switches, and crossings.[125]
A handcarA small, hand-powered railroad car used for track inspection
Heavy rail (US)
A city-based transit rail system that runs on its own dedicated track and often underground. Subways are considered heavy rail. Refers to commuter rail and inter-city rail when used by the FRA or in other countries.[132][133]
Heavyweight (US)
During the period between around 1910 and the mid-1930s, most passenger cars in the US were built with three axle trucks, concrete floors, and riveted, double walled sides and often weighed 90 tons or more. Heavyweight construction was used to improve ride quality.[134]
A locomotive temporarily coupled to heavy-tonnage trains to assist them over steep grades[135]
High ball
Another term for a clear signal, derived from the days of steam where a station operator would hoist a large wooden ball up a standard, signaling that the engineer was authorized to proceed[38][71][134][136]
A slang term used among railroad employees to convey to the crew of a train that they were clear to proceed[137][138]
High cube (US)
A boxcar whose vertical clearance is excessive[139][140]
Hog law
The federal hours-of-service law that forbids certain classes of railroad employees, including those operating trains, from working longer than a certain time after reporting for duty, currently 12 hours[141][142]
Common term for ALCO diesel locomotives, due to their turbo lag resulting in a tendency to blow large amounts of black smoke when throttling up[144][145]
TPW 400, an ALCO RS-11, a type of hood unitA locomotive whose sides and roof are nonstructural and do not extend the full width of the locomotive. Structural strength comes from the underframe.[134]
An overheated wheel bearing. This comes from the era before the widespread use of roller bearings where the ends of an axle rested in solid copper bearings housed in a journal box filled with oil soaked cotton waste. An overheated axle led to a hot journal box that often ignited the oiled waste. The term is used to refer to a railway wheel bearing that has over-heated due to internal friction caused by some fault in the bearing.[134][148][149]
Hot rail (US)
Any section of track over which a train movement is imminent. The closer or faster the approaching train, the "hotter" the rail.[150]
On some electrified railroads and rapid transit lines, the third rail which supplies power to locomotives or cars[151][152][153]
Hotel power (US)
Electric power used to provide for the comfort of passengers aboard a train en route[154]
Hotshot (US)
A fast, long-distance train given priority on the track over other trains[155][156][157]
The interlocking tower and tracks in Des Plaines, IllinoisAny location that includes a switch or crossing of two tracks, derived from the early practice of installation of a system of mechanical equipment called an interlocking plant to prevent collisions. See also signal box. Interlocking is also the term for the actual mechanical or electrical apparatus that prevents switch/points and signals from being operated in ways that would allow for conflicting train movements.[158]
J
Jenny (plural Jennies)
A relatively short, open top hopper car primarily used in the transport of iron ore.
Synonym for the verb "couple" used by brakemen when flat switching a yard. Talking on the radio, they will tell the engineer how many car lengths to back up in order to couple to another car (i.e. "five cars to a joint")[160]
Joint bar (US)
A metal plate that joins the ends of rails in jointed track
To pass an absolute signal and thereby change its aspect to stop; originated in the days of semaphore signals whose arms would drop to the stop aspect when passed[162]
Kodachrome
Southern Pacific Santa Fe Railroad's red, yellow, and black paint scheme, which resembled the packaging of Kodachrome color transparency film. This was the scheme instituted when the merger between Southern Pacific and Santa Fe was assumed to be approved. Hundreds of locomotives were painted in Kodachrome colors before the merger was denied.[citation needed]
A junction in which all track crossings take place at grade and routings must therefore be controlled by signals and interlocking
Light engine or light power
A locomotive unit traveling to a destination without a train attached. Can be a power pool transfer (relocation of a surplus of locomotives from one location to another), or can be a helper locomotive/locomotives being sent or returning from helping a heavy tonnage train over a grade.[164]
To have switches aligned correctly before a move (e.g. over the radio, "Would you call the dispatcher for a lineup so we can get out of here?")[165][166]
Local
A short freight train that is localized to a specific line or area, and switches out cars from rail yards or industrial spurs
Long hood forward (LHF)
A Norfolk SouthernEMD GP38-2 operating long hood forward through Ridgewood, New Jersey.A locomotive moving backwards (the direction of its long hood) that is either leading a train, most often a local, or part of a light power move
The ability of diesel and electric locomotives or multiple units to be joined together and controlled from one driving station. Such a set of joined locomotives is called a consist or (colloquially) "lash-up" and is said to be "MUed together".[167]
The Northeast Operating Rules Advisory Committee is responsible for standardizing operations and signal rules and aspects among a variety of widely interconnected rail systems through the Northeastern region of the United States. Until 1999, Conrail was the largest system operator to follow NORAC rules. Properties formerly owned by Conrail have since modified wayside signal aspects to conform with individual company rules and aspect plans, until such time that replacement infrastructure is installed.
A train composed of passenger cars that are privately owned by the railroad corporation and which travels along their rail lines, so that upper level management can review facilities, assess the addition or reconstruction of facilities that are needed for expansion or modernization; as well as streamlining of operations or removal of obsolete infrastructure. Also, these trains are used to escort visiting upper level management from other railroads for the purpose of a proposed purchase or sale of a rail line.[176][177][178]
Operation of a train by the driver or motorman alone, without a conductor
Outlawed
Train crew members who have reached their daily 12-hour maximum of hours worked and must cease working due to regulations[179]
Overhaul
A train of exclusively locomotives, usually retired, that exceeds the ordinary maximum number of locomotives in one train[citation needed]
Owl-eyed Cars
An uncommon nickname for Pennsylvania Railroad's MP54s and related heavyweight MU cars, in reference to their distinctive porthole front windows that give the appearance of a pair of eyes when viewed from the front[180][181]
P
Pac-Man
A nickname for the Canadian Pacific Railway's 1968–1996 logo featuring a black triangle within a white half-circle, which resembles the main character of the video arcade game Pac-Man. It was CP's corporate logo for all business aspects: Railway (CP Rail), shipping (CP Ships), telecommunications (CNCP), trucking (CP Express), and airline (CP Air). It was officially known as the Multimark.[182][unreliable source?][88]
Railway vehicle for use in passenger trains[183][184]
Patch
Union Pacific 588, formerly owned by Southern Pacific, showing a patch paint job of the new owner's reporting marksA locomotive or car wearing a new reporting mark or number on a "patch" over existing paint, usually of the former owner's
An Amtrak GE Dash 8-32BWH, in reference to the units' original paint scheme with large red and blue stripes. Also referred to as "Cutters" for the striping's supposed similarity to striping on Coast Guard vessels.[citation needed]
Pig train
A train devoted exclusively to intermodal traffic, generally trailers on flatcars (TOFC) or containers on flatcars (COFC)[186][187]
Plate (US)
The measurement of a freight car's vertical clearance. Plate F and above is considered excess height, and such cars must avoid low-clearance routes.[188] See also: Loading gauge
Pole switching (also called "poling")
Detail of a photo showing the poling pocket on the corner of a freight car in the 1930s A method of switching cars on adjacent tracks in which a pole is positioned between the locomotive and car, then the locomotive pushes the car using the pole. The pole is fitted into poling pockets on the locomotive and car to ensure it does not move during the switching maneuver.[189][190][191][192]
Pointless Arrow
Amtrak's first paint scheme, circa 1971
Pooch
A nickname for the General Electric P30CH locomotives. So termed by the similar appearance of the model name to the word pooch: P30CH / POOCH.[193]
Position light signal (Pennsylvania)
Signals made by the Pennsylvania Railroad that make use of a circular disc with up to eight lights mounted in a circle, with one light in the center. The lights would line up in a straight line to give the indication.[194][195]
Power Move (PM)
When multiple locomotives move within a place to get to another without railcars[citation needed]
Quarterly inspection, Q-inspection, or periodic inspection (US)
In the United States, a federally-mandated safety inspection performed on a locomotive every 92 operating days[201]
Quiet zone (US)
A designation by the Federal Railroad Administration that removes the requirement for train operators to sound their horn when approaching each public crossing in a certain area, often near residential neighborhoods who have asked for the status. Because the train does not sound its horn while approaching the crossings, safety upgrades to all of the crossings must be made in order to compensate. These upgrades usually include double gates, additional signage, lights, and bells, if they are not already present. Additionally, the residents requesting the status must indemnify the railroad from any resulting crossing mishaps.[202]
R
Racetrack
A nickname for a stretch of MetraCommuter Rail line and BNSF freight line between Chicago and Aurora where commuter trains and freight trains commonly attain high speeds.[203]
The portion of an autorack which is attached to a flatcar in order to protect the vehicles inside and may contain one, two, or three levels depending on the height of the vehicles being shipped[citation needed]
The practice of detaching a locomotive from its train, driving it to the other end of the train and re-attaching it, to allow the train to proceed in the direction it has just come from (e.g. when it reaches its destination and forms a service in the other direction).[218][219]
Run through
A train that originates on one railroad, with its destination on another road, that is simply "run through" to its destination instead of being exchanged for home road rolling stock at the crew-change point, in order to save expense[220][221]
An EMD F40PH locomotive, in reference to it operating in a constant state of full throttle (in order to provide head-end power to passenger cars).[223]
Sergeant Stripes
Canadian National EMD SD60F 5500 in the sergeant stripes paint schemeA Canadian National locomotive in the 1970s and 1980s paint scheme featuring light-gray stripes on the locomotive's long hood[224]
Shoofly (US)
A temporary stretch of track that takes trains around construction or an accident scene[225][226]
Shove
To push a cut of cars backward with a locomotive[227][228]
A length of track feeding a number of sidings that permits the sidings to be shunted without blocking the main line, or where two lines merge into one before ending with a buffer, to allow a run-round procedure to take place[229]
Looseness in a train caused by mating clearances in couplers[225]
Slug
A locomotive, with or without an operator's cab, which lacks a diesel engine, and draws power for its traction motors from a normal locomotive, known as a "mate" or "mother"[45][49]
A locomotive in a blue and white livery, most notably GATX units and BNSF units formerly owned by GATX, named after their vague resemblance to the blue-and-white creatures in The Smurfs
Snail
A locomotive with a diesel engine, but does not have traction motors, often used for external power for a rotary snow plow[233]
Snake head
A section of strap rail that has come loose and curled upward due to the weight of railway cars passing over it[234]
Speeder, motorcar, trackcar, putt putt, or golf cart
A privately owned speeder on display A small, motorized track inspection vehicle[235]
SpongeBob, SpongeBob Cab, or SpongeBob SquareCab
Rebuilt CSX SD40 or GP40 locomotives with fully yellow noses and a fully square hood ("square cab")
Wood (left track) and concrete (right track) ties beneath the railsBars of wood or concrete placed beneath and perpendicular to track to support the rails[236]
An iron or steel plate used to spread the weight of rail over a larger area of sleeper (tie) and facilitate a secure, low maintenance, fastening with bolts or clips
Toaster
An Amtrak AEM-7, sometimes called a toaster due to its boxy shapeEMD AEM-7 and ABB ALP-44 locomotives, due to their visual appearance and tendency to emit sparking and clicking sounds when idling. Also sometimes used to refer to any GE locomotive, due both to their tendency to shoot flames out of the exhaust stack during turbo lag and to General Electric's historic involvement in the manufacture of household appliances.[citation needed]
A small explosive device strapped to the top of a rail to alert an approaching train of danger ahead by creating a loud noise upon contact with a locomotive wheel[236]
Toupee
When a single stack train coming from reduced clearance territory has additional containers placed on top for the rest of its trip; the opposite of filet[111]
A system for authorizing main track occupancy using telephone, telegraph, and wayside stations to pass authority to train crews
Triclops
A name given by railfans to locomotives, most notably EMD SD60s, with three front windows.
Trops
Tropicana reeferboxcar. Shortened from Tropicana, referring to the orange or white refrigerated boxcars used to haul frozen concentrated orange juice to packaging facilities north of Florida. Term is specifically used by CSX crews in Cincinnati Terminal where a large such packaging facility is located.[citation needed]
The undercarriage assembly of rolling stock incorporating the train wheels, suspension, brakes and, in powered units, the traction motors
Tunnel Motor
Southern Pacific EMD SD40T-2 or EMD SD45T-2. Named for the lower-located air intakes to prevent the locomotive from pulling diesel exhaust in with clean air while traveling through a tunnel.[236]
Turn
A local freight train that makes a round trip, returning to originating station[240][241]
Non-operating railroad companies which own rights-of-way[243]
Unit Train
A unit train, also called a block train or a trainload service, is a train in which all cars (wagons) carry the same commodity and are shipped from the same origin to the same destination, without being split up or stored en route.[244][circular reference]
The main concourse building and façade of Cincinnati Union TerminalA railway station or terminal at which tracks and facilities are shared by two or more railway companies[246]
V
Vomit Bonnet
A derogatory name for BNSF's first attempt at a paint scheme, which used olive and beige as its principal colors but in the configuration of the traditional AT&SF "Warbonnet" scheme, first seen on SD70MAC 9647.[247]
W
Warbonnet
Santa Fe Dash 8 #881 at CN's Battle Creek fueling depot, displaying the modern interpretation of the classic red and silver warbonnet liveryThe combined Super Chief/El Capitan passenger train at Los Angeles Union Passenger Terminal in 1966 showing the red and silver warbonnet liverySanta Fe's red and silver paint scheme.[248] The scheme first appeared in 1937 on the railroad's E1 passenger locomotives for the Super Chief train.[249] It is widely considered the most famous and the most recognizable of railroad color schemes.[250][251] The Santa Fe phased out its use from the early 1970s on, then revived it in 1989.[252] It has become less common since the BNSF Railway merger in 1995.[253]
Washboards
M.U. cars, subway cars, and other equipment made with corrugated side panels that resembled washboards[254][255]
A document giving details and instructions relating to a shipment of goods. A waybill is issued by the railroad after receipt of the Bill Of Lading.[256]
One of two Santa Fe paint schemes. The standard freight scheme from 1972 until the BNSF merger was dark blue with yellow on the front, with the same color division as the warbonnet scheme. It is also known as Bluebonnet. Yellowbonnet can also mean a warbonnet unit with only the red painted over, resulting in a silver and yellow locomotive; this was used on passenger engines transferred to freight service after the formation of Amtrak.[261]
YN1
CSX's first yellow-nose paint scheme; gray overall with dark blue on the top half of the cab and yellow on the front of the nose; blue "CSX" lettering[262]
YN2
A CSX unit wearing the YN2 paint schemeCSX's second yellow-nose paint scheme; more yellow on the nose; the whole cab is dark blue, along with a stripe on the side; blue or yellow "CSX" lettering[262]
Z
Zebra Stripes
A Santa Fe locomotive in the early black scheme with white warning stripes.[263] CN Rail has also used this scheme on earlier locomotives.[264][265]
Z-Train
An intermodal train (such as the ZBRLC or ZLTLC). Such trains are commonly operated by BNSF and Union Pacific. Usually the hottest (fastest), highest priority train.[266]
^Loumiet, James R.; Abrams, Bernard S.; Jungbauer, William G. (2005). "3". Train Accident Reconstruction and FELA and Railroad Litigation. Lawyers & Judges Publishing Company. p. 20. ISBN9781930056930. Retrieved September 18, 2014.
^White, John (1968). A History of the American Locomotive - Its Development: 1830–1880. New York: Dover Publications. p. 57. ISBN0-486-23818-0.
^Mallaband, P.; Bowles, L. J. (1982). Coaching Stock of British Railways 1978. RCTS Railway Correspondence and Travel Society. p. 91. ISBN0-901115-44-4.
^"GE U28C". Conrail Historical Society. Retrieved September 5, 2015.
^"Car knocker". Merriam-Webster. Retrieved September 5, 2015.
^Solomon, Brian (June 15, 2016). The Field Guide to Trains: Locomotives and Rolling Stock. Minneapolis, Minnesota: Voyageur Press. p. 189. ISBN9780760349977. OCLC928614280.
^"Centipede Tender". Transportation Dictionary. Retrieved September 5, 2015.
^US 5733091, Long, James, "Rail transportable ramps for circus loading standard highway semi-trailers", published 1998-03-31, assigned to General Electric Company
^"Missouri, K. & T. Ry. Co. of Texas v. Stinson". The Southwestern Reporter. Vol. 78. St. Paul: West Publishing Company. 1904. pp. 986–987. Retrieved October 13, 2014.
^Walter J. Eagle, ed. (1902). American Negligence Cases. Vol. XII. New York: Remick, Schilling & Co. p. 185.
^"Hotbox". The Hotbox. North Central Region National Model Railroad Association. January 7, 2008. Archived from the original on January 7, 2008. Retrieved January 25, 2016.
^US 4659043, Gallagher, Cornelius A., "Railroad hot box detector", published 1987-04-21, assigned to Servo Corporation of America
^Cunningham, William A. (1997). The Railroad Lantern, 1865 to 1930: The Evolution of the Railroad Hand Lantern as Reflected by the United States Patent Records and by Lanterns Made by Cross, Dane & Westlake, Dane, Westlake & Covert, the Adams & Westlake Manufacturing Co. & the Adams & Westlake Company. Wm. A. Cunningham.
^Cudahy, Brian J. (2001). The Cruise Ship Phenomenon in North America. Cornell Maritime Press. p. 45. ISBN0870335294. Retrieved September 6, 2015. Called the multimark, it was a geometric design showing a triangle and crescent inside a square, rendered in colors appropriate for the service in question. When used on the locomotives and passenger cars of CP Rail, the multimark was rendered in red, white, and black.
^"Canadian Pacific has new "Multimark"". Railway Carmen's Journal. Vol. 73–74. 1968. p. 144. Retrieved September 6, 2015.
^Pritchard, Robert; Hall, Peter (2013). British Railways, Locomotives & Coaching Stock 2013. Sheffield: Platform 5 Publishing. p. 94. ISBN978-1-909431-02-7.
^Mallaband, P.; Bowles, L. J. (1982). Coaching Stock of British Railways 1978. RCTS Railway Correspondence and Travel Society. p. 3. ISBN0-901115-44-4.
^Stilgoe, John R. (2009). "6: Fast Freight". Train Time: Railroads and the Imminent Reshaping of the United States Landscape. University of Virginia Press. ISBN978-0813930503. Retrieved September 6, 2015.
^Haines, Henry Stevens (1919). Efficient Railway Operation. New York: The Macmillan Company. p. 276 – via Internet Archive. poling pocket.
^Middleton, William D.; Smerk, George; Diehl, Roberta L., eds. (2007). "Poling Yards". Encyclopedia of North American Railroads. Bloomington and Indianapolis: Indiana University Press. p. 281. ISBN978-0-253-34916-3 – via Google Books.
^Droege, John Albert (1906). "Chapter X: Pole Switching". Yards and Terminals and Their Operation. New York: The Railroad Gazette. pp. 97–103 – via Google Books.
^US 1263426, Kadel, Byers W., "Push-pole pocket for railway-cars", published 1918-04-23
^Schumacher, Richard (July 28, 1999). "Designing Model Railroad Operations". Gateway NMRA [National Model Railroad Association]. Retrieved September 14, 2015.
^"Our First Warbonnet". Illinois Railway Museum. November 22, 2005. Retrieved September 17, 2015. Reprinted from Rail & Wire issue 165.
^"ATSF-98". Orange Empire Railway Museum. Retrieved September 17, 2015.
^Glischinski, Steve (1997). Santa Fe Railway. Railroad Color History. Osceola, Wisconsin: Andover Junction Publications. p. 72. ISBN0-7603-0380-0. Retrieved September 17, 2015.
^Solomon, Brian (2003). Santa Fe Railway. St. Paul, Minnesota: Motorbooks International. p. 9. ISBN0-7603-1072-6. Retrieved September 17, 2015.
Transport portal
.jpg)
