Jump to content

De Hersteller, Sintjohannesga

Coordinates: 52°56′50″N 5°46′40″E / 52.94722°N 5.77778°E / 52.94722; 5.77778
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 06:18, 16 December 2020 (Task 18 (cosmetic): eval 2 templates: del empty params (1×); hyphenate params (1×); cvt lang vals (2×);). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

De Hersteller, Sintjohannesga
De Hersteller, May 2009.
Map
Origin
Mill nameDe Hersteller
Mill locationHogedijk 132, 8464 NZ, Sintjohannesga
Coordinates52°56′50″N 5°46′40″E / 52.94722°N 5.77778°E / 52.94722; 5.77778
Operator(s)Molenstichting De Hersteller
Year built1857
Information
PurposeDrainage mill
TypeSmock mill
StoreysTwo storey smock
Base storeysOne storey base
Smock sidesEight sides
No. of sailsFour sails
Type of sailsCommon sails, Fauël system on leading edges
WindshaftCast iron
WindingTailpole and winch
Type of pumpArchimedes screw

De Hersteller (Template:Lang-en) is a smock mill in Sintjohannesga, Friesland, Netherlands which was built in 1857. The mill has been converted to residential use but can turn in the wind. It is listed as a Rijksmonument.

History

De Hersteller was built in 1857. It was one of six mills that drained the Sintjohannesgaaster Veenpolder. The miller's living accommodation was built into the mill when it was constructed. The mill worked until Christmas 1930. The cap and sails were removed before the start of World War II, having been purchased by millwright K J Westra of Franeker, Friesland for ƒ500. It was proposed to demolish the remaining smock in 1948, but this plan was cancelled. De Hersteller was restored in 1980-81 by millwright J D Wal of Grou, Friesland. The restored mill was officially reopened on 19 October 1981.[1] The mill is listed as a Rijksmonument, №359671.[2]

Description

De Hersteller is what the Dutch describe as a Grondzeiler. It is a two storey smock mill on a single storey base. There is no stage, the sails reaching almost to ground level. The mill is winded by tailpole and winch. The smock and cap are thatched.[1] The sails are Common sails, with the Fauël system fitted to the leading edges.[2] They have a span of 21.52 metres (70 ft 7 in).[1] The sails are carried on a cast iron windshaft, which was cast by the Nijmeegse IJzergieterij, Nijmegen, Gelderland in 1981.[2] The windshaft carries the brake wheel which has 65 cogs. This drives the wallower (33 cogs) at the top of the upright shaft. No other machinery remains.[1]

Public access

De Hersteller is open to the public by appointment.[2]

References

  1. ^ a b c d Stichting De Fryske Mole (1995). Friese Molens (in Dutch). Leeuwarden: Friese Pers Boekerij bv. p. 247. ISBN 90 330 1522 6.
  2. ^ a b c d "St. Johannesga, Fryslân" (in Dutch). Molendatabase. Retrieved 23 September 2014.