Carlingford railway line

Carlingford railway line
Buffer at the end of the line at Carlingford
Overview
Status	Active
Owner	RailCorp
Locale	Sydney, Australia
Termini	Carlingford Clyde
Stations	7
Service
Services	T6 Carlingford Line
Operator(s)	Sydney Trains
Rolling stock	K and M sets
History
Opened	17 November 1888
Closed	5 January 2020 (scheduled close)
Technical
Line length	7.19 km
Character	At-grade
Track gauge	1,435 mm (4 ft 8+1⁄2 in) standard gauge
Electrification	Overhead 1500 V DC
Route map km0 27.85 Carlingford 26.34 Telopea 24.84 Dundas 24.01 Rydalmere Parramatta River 22.95 Camellia Sandown Line 22.42 Rosehill Parramatta Road 20.66 Main Suburban railway line

T6 Carlingford Line

S set at Clyde station
Overview
Service type	Commuter rail
Current operator(s)	Sydney Trains
Ridership	512 000 (2016-17)
Route
Termini	Clyde Carlingford
Stops	7
Service frequency	1-2 trains per hour
Line(s) used	Carlingford railway line
Sydney Trains services Metro North West North Shore & Western Inner West & Leppington Bankstown Eastern Suburbs & Illawarra Cumberland Lidcombe & Bankstown Olympic Park Airport & South Northern

The Carlingford railway line is a branch railway line in Sydney, Australia. It was opened from Clyde to Subiaco (later renamed Camellia) in January 1885, then by means of the construction of a bridge across the Parramatta River, to Carlingford in April 1896. The line runs north-south between the suburb of Carlingford and the Main Suburban railway line at Clyde. Passenger services on the line form part of the Sydney Trains commuter rail network and are marketed as the T6 Carlingford Line. The railway line's small catchment, low patronage, short platforms and single track for much of its length mean the T6 generally operates as a shuttle service, with passengers changing at Clyde for T1 North Shore, Northern & Western Line services to the Sydney central business district and Parramatta. Most of the line is planned for conversion to light rail as part of the Parramatta Light Rail network and will close to passenger services on 5 January 2020, to be replaced by a more frequent bus bus route 535 to Parramatta instead of Clyde, until the light rail opens.

Line description

The Carlingford line branches off the Western line at Clyde heading north over Parramatta Road on a level crossing, before heading under the M4 Western Motorway to a station opposite Rosehill Gardens Racecourse. It is a double track line to this point.

Immediately south of Rosehill, the two tracks join, before dividing into two bidirectional tracks, the Sandown line and the Carlingford line. At Rosehill, two platforms are provided, one four-car long platform on the Carlingford line and one platform which is approximately sixteen-cars long on the Sandown line track which is used for special events at the racecourse. During large special events at Rosehill Racecourse, such as horse racing meetings, a charter train is provided to operate a shuttle service with 20-minute frequency between Clyde and Rosehill only.

The line then heads in a north-easterly direction over the Parramatta River to Carlingford. The stations from Camellia to Carlingford consist of a single platform of a sufficient length to accommodate four-car suburban trains. All other stations on the Sydney Trains network are capable of accommodating eight-car trains. There are no crossing loops or any further sections of double track on the line, and thus no capacity for trains to pass each other. Unlike most other lines, trains on this section of line are protected by an axle counter at Rosehill. There are no track circuits or signals between Rosehill and Carlingford, so trains are blocked from passing the last signal at Rosehill until all axles have been counted out. The lack of track circuits also means that trains on this line will appear to be stopped at Rosehill on realtime apps when between Rosehill and Carlingford. The average 12 minute travel time between Clyde and Carlingford allows a theoretical maximum capacity of approximately two trains per hour on this line. The Carlingford line is Sydney's least-used suburban railway line.

Additionally, as the line is lightly used, the electrical system on this line cannot handle large loads. As a result, OSCARs (H sets) over four cars long or Waratahs of any length are not permitted to run on the line.

Stations

Name	Distance from Central	Opened	Railway line	Serving suburbs	Other lines
colspan=6 style=background:#Template:Sydney Trains color| Clyde - Carlingford
Clyde	20.660 km	1882	Main Suburban	Clyde, Granville	T1 T2
Rosehill	22.420 km	1888	Carlingford	Rosehill
Camellia	22.950 km	1885	Carlingford	Camellia
Rydalmere	24.01 km	1896	Carlingford	Rydalmere
Dundas	24.84 km	1896	Carlingford	Dundas
Telopea	26.34 km	1925	Carlingford	Telopea
Carlingford	27.85 km	1896	Carlingford	Carlingford

Sidings

Sign informing drivers about special working between Carlingford and Rosehill

A number of industrial and car storage sidings have been built on the line.

Starting from the Clyde end:

• Prestressed Concrete Siding: located between Clyde station and the Parramatta Road crossing. Served the railways prestressed concrete manufacturing plant which no longer operates. Currently used to stable an automated track recording vehicle. The junction is on the branch down line with the points facing north (down).
• Shell Refinery Siding: located between A'Beckett Creek and Rosehill station. The siding and junctions points have been removed. Junction was on the branch up line with the points facing south (up).
• Rheem Siding and Loop: located at Rydalmere station. Served the Rheem factory. The siding consisted of a short loop line with junctions north and south of the original Rydalmere station and a siding branch into the factory itself at the southern end of the yard. The loop, factory branch and all junctions have been removed. The new Rydalmere station is now situated on the opposite side of the branch line from the original station and occupies the site of the former loop.
• Electricity Commission Siding: located at the southern end of Carlingford station. The siding was built to move large electrical transformers into the Carlingford Electrical sub-station, one of the major substations distributing electric power to Sydney. The siding and junction points have been removed. The junction was on the run-around loop with the points facing north.
• Carlingford Produce Siding and Loop: a locomotive run-around loop alongside Carlingford station and a siding serving the Carlingford Produce store. The produce store siding joined the run-around loop at the southern end of the station with the points facing south. The loop and siding, together with all their junctions, have been removed.
• Carlingford Car Storage Sidings: a two track siding north of Carlingford station connected to both the branch line and the locomotive run-around loop. The sidings and junctions have been removed.

History

Bridge over the Parramatta River

The Carlingford and Sandown lines

The line was opened in two sections: Clyde to Camellia was opened on 17 November 1888, and Camellia to Carlingford (then known as Pennant Hills) was opened on 20 April 1896. Telopea station was added in 1925. Originally the line was privately owned by two companies: the line from Clyde to Rosehill was owned by John Bennett and the line from Rosehill to Carlingford was owned by the Rosehill Railway Company. The lines were taken over by their bank in 1896, with the Government purchasing the line in 1898 and recommencing services on 1 August 1900.

The line from Clyde to Rosehill was electrified on 12 December 1936. The electrification was extended to Carlingford on 9 August 1959.

In 1996, the original iron lattice bridge over the Parramatta River was replaced. The new bridge only has one track, although it was built to allow a second track to be laid in the future. It sits on the refurbished piers of the original bridge.

In early 2007 the pedestrian crossings at Telopea and Dundas stations were rebuilt. The new automatic crossings provide audible and visual warnings of an approaching train and a short time later close the metal gates.

Over the week of 20 to 26 October 2007, the section of track from Telopea to Carlingford was completely replaced, utilising concrete sleepers instead of timber ones. The section from Telopea to Rosehill was similarly upgraded over the fortnight of 22 June to 3 July 2009. The railway remains on timber sleepers from Rosehill to Clyde.

The line was colour-coded orange in CityRail promotional material until 1991 when it was coded yellow (along with the Western Line). Since 2000, it has been colour-coded dark blue.

Until January 2010, the line carried oil trains to and from the Clyde Refinery on the Sandown line. During October 2016, the Sandown line traffic was officially suspended. A Stop Block was placed on the Sydney side of Access Road level crossing.

Modification proposals

The line's low frequency and levels of patronage have led to various inquiries and studies into the future of the Carlingford line. A major problem remains the level crossing over Parramatta Road, which holds up traffic when trains travel across the road. Proposals have been made including tunnel links to Clyde or Granville stations, or even to replace the line altogether with a more frequent light rail or busway service.

The New South Wales Government originally planned for the Carlingford line to be part of Stage 2 of the Parramatta Rail Link. The plan would have incorporated the majority of the line, with the line between Carlingford and Camellia duplicated. Telopea, Dundas, and Rydalmere stations would also have been duplicated and upgraded to allow eight car trains. Camellia station would have been demolished, Rosehill station closed and replaced by a new underground station with a preliminary name of 'Rosehill/Camellia'. Carlingford station would also have been replaced by a new underground station. Various proposals were put forward, including a three-way underground junction near Carlingford linking the station to the proposed North West Rail Link as well as the line to Chatswood. In 2003, the Minister for Transport, Michael Costa announced that only Stage 1 of the line, from Chatswood to Epping, would be built, and the Carlingford line section indefinitely postponed.

However, on 11 August 2010, the Australian Government promised $2.6 billion towards this project, who, along with the New South Wales Government, would extend the line from Epping to Parramatta via the Carlingford line. Work was to commence in 2011, with a projected 2017 finish. However, following a change of state government at the 2011 election, the project was shelved. A large amount of land lies behind Carlingford station, for future extensions of the line.

Under the Rail Clearways Project, the line was to have a crossing loop constructed at Dundas station and thus increase train frequency to half-hourly throughout the day, however this project was cancelled in November 2008.

Parramatta Light Rail

In 2013, Parramatta City Council published a feasibility study into a proposed Western Sydney Light Rail network. The study proposed the construction of a light rail line from Parramatta to the Macquarie Centre, running parallel to the Carlingford line between Camelia and Dundas. The report noted that while the future of the railway line was a matter for the state government, conversion of the line to light rail would reduce the cost of the light rail's construction significantly.

In December 2015 the NSW government announced the Camellia – Carlingford section of the line would be converted to light rail, forming a branch of the Parramatta Light Rail network. This would replace the connection to the Sydney Trains network at Clyde with a link to Parramatta and Westmead. Construction is expected to begin in 2020 and be completed by 2023. The Carlingford line north of Parramatta Road has been gazetted for closure from 5 January 2020 to allow conversion works to take place. The duration of this closure has yet to be decided. Much of the remaining section will be closed permanently. This includes Rosehill station, which is not on the light rail route. The short section between Clyde and the Parramatta Road level crossing will officially remain open for use by Sydney Trains and will be retained for future transport use. The Sandown line has been permanently closed since July 2019.

Patronage

The following table shows the patronage of Sydney Trains network for the year ending 30 June 2019. The patronage figure is so low the Carlingford Line can barely be seen in the graph.

2021–22 Sydney Trains patronage by line

T1	41,980,000
T2	23,077,000
T3	11,198,000
T4	27,775,000
T5	3,503,000
T7	605,000
T8	16,879,000
T9	10,415,000

Further reading

• Singleton, CC (April 1955). "Railways and Tramways of the Parramatta Hills District - Clyde to Carlingford and Sandown Railways". Australian Railway Historical Society Bulletin: 50–54, 57–62.
• Jenkins, Christopher (December 1974). "The Carlingford-Clyde Branch Line". Australian Railway Historical Society Bulletin: 266–283.

External links

Media related to Carlingford railway line at Wikimedia Commons