Nissan H engine
 | This article needs additional citations for verification. (December 2009) |
| Nissan H engine | |
|---|---|
| Overview | |
| Manufacturer | Nissan Motors |
| Production | 1956-1960, 1962-present |
| Layout | |
| Configuration | I4 & I6 |
| Displacement |
|
| Cylinder block material | Cast iron |
| Cylinder head material | |
| Valvetrain | |
| Combustion | |
| Fuel system | Carburetor |
| Chronology | |
| Predecessor | Nissan G engine |
The Nissan H series of automobile engines is an evolution of the Nissan "R" engine which was based on the 1.5L 3 main "G" used in the 1960s. Both straight-4 and straight-6 versions were produced, it is a pushrod OHV design with iron block, early models with an iron head, later models with aluminum head. Versions of this motor have been used in many Nissan autos and forklifts, well into the eighties and a version called H20II is still in production today. The SD diesels are based on this series of motors (bore spacing and basic block layout)
Inline-4
1H
The 1H is not related to the later H engines. It was also an all-iron, OHV engine, but with a bore and stroke of 73 and 89 mm it displaced 1,489 cc. Power was 50 PS (49 hp) at 4,400 rpm in 1956, but this increased to 57 PS (56 hp) in August 1958.[1]
Applications:
- 1954-1959 Nissan Austin
- 1956-1960 Nissan Junior B40/42
H
The basic H is a 1.9 L (1,883 cc) engine produced from 1962 for Nissan's Cedric. Bore was 85 mm (3.3 in) and stroke was 83 mm (3.3 in). The 8.0:1 compression version produced 92 hp (69 kW) and 117 lb·ft (159 Nm), while a high-compression engine (8.5:1) produced 95 hp (71 kW) and 120 lb·ft (163 Nm).
Applications:
- 1962 Nissan Cedric 31 (high-compression)
- 1962-1965 Nissan Junior 40
- 1962-1965 Nissan Caball C141
H20
The H20 is the most-common member of the family. Displacing 2.0 L (1,982 cc) thanks to a larger (87.2 mm) bore, H20 engines produced around 99 hp (74 kW) and 123 lb·ft (167 Nm).
Applications:
- 1965-1971 Nissan Cedric 130
- 1966-1970 Nissan Junior 41
- 1966-1967 Nissan Caball C142
- 1966-1972 Nissan Clipper T65
- 1967-1976 Nissan Caball C240
- 1971-1975 Nissan Cedric 230
- 1971-1975 Nissan Junior 140
- 1975-1982 Nissan Junior 141
- 1976-1979 Nissan Cedric 330
- 1979-1983 Nissan Cedric 430
- 1970s Yue Loong Cedric 803 (91 PS or 67 kW at 4,800 rpm)[2]
- Nissan Caravan/Homy
- 1980-1982 Nissan Urvan
Also N230S, T40, forklifts and other machinery
H20P
The H20P is the LPG-powered version of the H20.
Applications:
- 1976-1979 Nissan Cedric 330
- 1975-1979 Nissan Gloria 330
H25
The H25 was developed as a high-output version of the H20. This engine was used in forklifts.
2472 cc (2.5L) bore x stroke: 92.0 mm (3.6 in) x 93.0 mm (3.7 in).
- compression ratio 8.7
- maximum output (gross) 62 bhp (46 kW; 63 PS) @ 3200 rpm
- maximum torque (gross) 132 lb⋅ft (179 N⋅m; 18.2 kg⋅m) @ 1600 rpm
R
The R engine utilised essentially the same block as the H20, but a 17 mm shorter piston stroke resulted in a capacity reduction of 387 cc. The R was later named H16. The "R" motor made the switch from 3 to 5 main bearings in 1967 for improved reliability, and the H20 was developed from this arrangement. The R/H16 bore and stroke is 87.2mm x 66mm displacing 1,595 cc. With 9.0:1 compression, the engine produced 96 hp (97 PS) and 103 lb⋅ft (140 N⋅m).
Applications:
- 1965-1967 Nissan Bluebird R411 SSS
- 1965-1968 Nissan Silvia CSP311
- 1967-1970 Datsun Sports SP311/SPL311
- 1968-1972 Nissan Homer T641
U20
The U20 was similar to the H20 but with an SOHC cylinder head designed by Prince. The U20 produced 135-150 hp.
Applications:
- 1967.5-1970 Datsun Sports SR311
Straight-6
K
The K engine is a 2.8 L (2,825 cc) straight-6 engine produced from 1963 to 1965. The K engine is an H engine with two extra cylinders. The K engine produced 118 hp (120 PS).
Applications:
- 1963-1965 Nissan Cedric Special 50
H30
The H30 is a 3.0 L (2,974 cc) straight-6 version produced from 1965. Output was 120 hp (122 PS) and 163 lb⋅ft (221 N⋅m). The H30 is an H20 with two extra cylinders.
Applications:
- 1965-1973 Nissan President H150
- 1973-1989 Nissan President H250
- 1966-1976 Nissan C80
This engine is used in large forklifts
See also
References
- ^ Ozeki, Kazuo (2007).
日本のトラック・バス 1918~1972 (in Japanese). Tokyo: Miki Press. pp. 98–99. ISBN 978-4-89522-494-9.{{cite book}}: Unknown parameter|trans_title=ignored (|trans-title=suggested) (help)CS1 maint: extra punctuation (link) - ^ Quattroruote: Tutte le Auto del Mondo 77/78 (in Italian). Milano: Editoriale Domus S.p.A. 1977. pp. 554–556.
