|This article needs additional citations for verification. (January 2008)|
Tamper resistance is resistance to tampering (intentional malfunction or sabotage) by either the normal users of a product, package, or system or others with physical access to it. There are many reasons for employing tamper resistance.
Tamper resistance ranges from simple features like screws with special drives, more complex devices that render themselves inoperable or encrypt all data transmissions between individual chips, or use of materials needing special tools and knowledge. Tamper-resistant devices or features are common on packages to deter package or product tampering.
Anti-tamper devices have one or more components: tamper resistance, tamper detection, tamper response, and tamper evidence.  In some applications, devices are only tamper-evident rather than tamper-resistant.
Tampering involves the deliberate altering or adulteration of a product, package, or system. Solutions may involve all phases of product production, packaging, distribution, logistics, sale, and use. No single solution can be considered as "tamper-proof". Often multiple levels of security need to be addressed to reduce the risk of tampering. Some considerations might include:
- Identify who a potential tamperer might be: average user, child, psychopath, misguided joker, saboteur, organized criminals, terrorists. What level of knowledge, materials, tools, etc. might they have?
- Identify all feasible methods of unauthorized access into a product, package, or system. In addition to the primary means of entry, also consider secondary or "back door" methods.
- Control or limit access to products or systems of interest.
- Improve the tamper resistance to make tampering more difficult, time-consuming, etc.
- Add tamper-evident features to help indicate the existence of tampering.
- Educate people to watch for evidence of tampering.
Tamper means interfere with (something) without authority or so as to cause damage.
Nearly all mains appliances and accessories can only be opened with the use of a screwdriver (or a substitute item such as a nail file or kitchen knife). This prevents children and others who are careless or unaware of the dangers of opening the equipment from doing so and hurting themselves (from electrical shocks, burns or cuts, for example) or damaging the equipment. Sometimes (especially in order to avoid litigation), manufacturers go further and use tamper-resistant screws, which cannot be unfastened with standard equipment. Tamper-resistant screws are also used on electrical fittings in many public buildings primarily to reduce tampering or vandalism that may cause a danger to others.
Warranties and support
A user who breaks equipment by modifying it in a way not intended by the manufacturer might deny they did it, in order to claim the warranty or (mainly in the case of PCs) call the helpdesk for help in fixing it. Tamper-evident seals may be enough to deal with this. However, they cannot easily be checked remotely, and many countries have statutory warranty terms that mean manufacturers may still have to service the equipment. Tamper proof screws will stop most casual users from tampering in the first place. In the US, the Magnuson-Moss Warranty Act prevents manufacturers from voiding warranties solely due to tampering. A warranty may be dishonored only if the tampering actually affected the part that has failed, and could have caused the failure.
Tamper-resistant microprocessors are used to store and process private or sensitive information, such as private keys or electronic money credit. To prevent an attacker from retrieving or modifying the information, the chips are designed so that the information is not accessible through external means and can be accessed only by the embedded software, which should contain the appropriate security measures.
It has been argued that it is very difficult to make simple electronic devices secure against tampering, because numerous attacks are possible, including:
- physical attack of various forms (microprobing, drills, files, solvents, etc.)
- freezing the device
- applying out-of-spec voltages or power surges
- applying unusual clock signals
- inducing software errors using radiation (e.g., microwaves or ionising radiation)
- measuring the precise time and power requirements of certain operations (see power analysis)
Tamper-resistant chips may be designed to zeroise their sensitive data (especially cryptographic keys) if they detect penetration of their security encapsulation or out-of-specification environmental parameters. A chip may even be rated for "cold zeroisation", the ability to zeroise itself even after its power supply has been crippled. In addition, the custom-made encapsulation methods used for chips used in some cryptographic products may be designed in such a manner that they are internally pre-stressed, so the chip will fracture if interfered with.
Nevertheless, the fact that an attacker may have the device in his possession for as long as he likes, and perhaps obtain numerous other samples for testing and practice, means that it is practically impossible to totally eliminate tampering by a sufficiently motivated opponent. Because of this, one of the most important elements in protecting a system is overall system design. In particular, tamper-resistant systems should "fail gracefully" by ensuring that compromise of one device does not compromise the entire system. In this manner, the attacker can be practically restricted to attacks that cost less than the expected return from compromising a single device (plus, perhaps, a little more for kudos). Since the most sophisticated attacks have been estimated to cost several hundred thousand dollars to carry out, carefully designed systems may be invulnerable in practice.
Anti-tamper (AT) is required in all new military programs in the U.S.
Tamper resistance finds application in smart cards, set-top boxes and other devices that use digital rights management (DRM). In this case, the issue is not about stopping the user from breaking the equipment or hurting themselves, but about either stopping them from extracting codes, or acquiring and saving the decoded bitstream. This is usually done by having many subsystem features buried within each chip (so that internal signals and states are inaccessible) and by making sure the buses between chips are encrypted.
DRM mechanisms also use certificates and asymmetric key cryptography in many cases. In all such cases, tamper resistance means not allowing the device user access to the valid device certificates or public-private keys of the device. The process of making software robust against tampering attacks is referred to as "software anti-tamper".
||This article contains weasel words: vague phrasing that often accompanies biased or unverifiable information. (January 2011)|
Nuclear reactors that are intended to be sold to countries that otherwise do not possess nuclear weapons must be made tamper-resistant to prevent nuclear proliferation. For example, the proposed SSTAR will feature a combination of anti-tamper techniques that will make it difficult to get at the nuclear material, ensure that where the reactors are transported to is closely tracked, and have alarms in place that sound if attempts at entry are detected (which can then be responded to by the military).
Tamper resistance is sometimes needed in packaging. for example:
- Regulations for some pharmaceuticals require it
- High value products may be subject to theft and pilferage
- Evidence needs to remain unaltered for possible legal proceedings
- Extra layers of packaging (no single layer or component is "tamper-proof")
- Packaging that requires tools to enter
- Extra-strong and secure packaging
- Packages that cannot be resealed
- Tamper-evident seals and features
The tamper resistance of packaging can be evaluated by consultants and experts in the subject. Also, comparisons of various packages can be made by careful field testing of the lay public.
Software is also said to be tamper-resistant when it contains measures to make reverse engineering harder, or to prevent a user from modifying it against the manufacturer's wishes (removing a restriction on how it can be used, for example). One commonly used method is code obfuscation.
However, effective tamper resistance in software is much harder than in hardware, as the software environment can be manipulated to near-arbitrary extent by the use of emulation.
If implemented, trusted computing would make software tampering of protected programs at least as difficult as hardware tampering, as the user would have to hack the trust chip to give false certifications in order to bypass remote attestation and sealed storage. However, the current specification makes it clear that the chip is not expected to be tamper-proof against any reasonably sophisticated physical attack; that is, it is not intended to be as secure as a tamper-resistant device.
A side effect of this is that software maintenance gets more complex, because software updates need to be validated and errors in the upgrade process may lead to a false-positive triggering of the protection mechanism.
- Tamper-evident devices
- Chicago Tylenol murders
- Packaging and labelling
- Package pilferage
- FIPS 140-2
- Child-resistant packaging
- Wrap rage
- Smith, Sean; Weingart, Steve (1999). "Building a High-Performance, Programmable Secure Coprocessor". Computer Networks 31 (9): 831–860. doi:10.1016/S1389-1286(98)00019-X.
- Rosette, Jack L (1992). Improving tamper-evident packaging: Problems, tests, and solutions. ISBN 978-0877629061.
- Tamper Resistance – a Cautionary Note
- Design Principles for Tamper-Resistant Smartcard Processors
- Low cost attacks on tamper resistant devices