Niobium: Difference between revisions
No edit summary |
Undid revision 284275491 by 164.58.69.2 (talk) Vandalism |
||
Line 1: | Line 1: | ||
{{infobox niobium}} |
{{infobox niobium}} |
||
'''Niobium''' ({{pronEng|naɪˈoʊbiəm}}) ([[Greek mythology]]: ''[[Niobe]]'', daughter of ''[[Tantalus]]''), or '''columbium''' ({{IPA|/kəˈlʌmbiəm/}}), is the [[chemical element]] with the symbol '''Nb''' and the [[atomic number]] 41{{cn}}. A rare, soft, grey, [[ductile]] [[transition metal]], niobium is found in the minerals [[pyrochlore]], the main commercial source for niobium, and [[columbite]]. |
'''Niobium''' ({{pronEng|naɪˈoʊbiəm}}) ([[Greek mythology]]: ''[[Niobe]]'', daughter of ''[[Tantalus]]''), or '''columbium''' ({{IPA|/kəˈlʌmbiəm/}}), is the [[chemical element]] with the symbol '''Nb''' and the [[atomic number]] 41{{cn}}. A rare, soft, grey, [[ductile]] [[transition metal]], niobium is found in the minerals [[pyrochlore]], the main commercial source for niobium, and [[columbite]]. |
||
[[File:car.jpg]] |
|||
Niobium has physical and chemical properties similar to those of the element [[tantalum]], and the two are therefore difficult to distinguish. The English chemist [[Charles Hatchett]] reported a new element similar to tantalum in 1801, and named it columbium. In 1809, the English chemist [[William Hyde Wollaston]] wrongly concluded that tantalum and columbium were identical. The German chemist [[Heinrich Rose]] determined in 1846 that tantalum ores contain a second element, which he named niobium. In 1864 and 1865, a series of scientific findings clarified that niobium and columbium were the same element (as distinguished from tantalum), and for a century both names were used interchangeably. The name of the element was officially adopted as niobium in 1949. |
Niobium has physical and chemical properties similar to those of the element [[tantalum]], and the two are therefore difficult to distinguish. The English chemist [[Charles Hatchett]] reported a new element similar to tantalum in 1801, and named it columbium. In 1809, the English chemist [[William Hyde Wollaston]] wrongly concluded that tantalum and columbium were identical. The German chemist [[Heinrich Rose]] determined in 1846 that tantalum ores contain a second element, which he named niobium. In 1864 and 1865, a series of scientific findings clarified that niobium and columbium were the same element (as distinguished from tantalum), and for a century both names were used interchangeably. The name of the element was officially adopted as niobium in 1949. |
||
DEFLEMMMMMMMMMMMMMMMMMMMMMMMMM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
|||
[[File:car.jpg]] |
|||
It was not until the early 20th century that niobium was first used commercially. [[Brazil]] is the leading producer of niobium and [[ferroniobium]], an [[alloy]] of niobium and iron. Niobium is used mostly in alloys, the largest part in special [[steel]] such as that used in gas [[Pipeline transport|pipelines]]. Although alloys contain only a maximum of 0.1%, that small percentage of Niobium improves the strength of the steel. The temperature stability of niobium-containing [[superalloy]]s is important for its use in [[jet engine]]s and [[rocket engine]]s. Niobium is used in various [[Superconductivity|superconducting]] materials. These [[Type-II superconductor|superconducting alloy]]s, also containing [[titanium]] and tin, are widely used in the [[Superconducting magnet|superconducting magnets]] of [[Magnetic resonance imaging|MRI scanners]]. Other applications of niobium include its use in welding, nuclear industries, electronics, optics, [[numismatics]] and jewellery. In the last two applications, niobium's low toxicity and ability to be coloured by [[Anodizing|anodisation]] are particular advantages. |
It was not until the early 20th century that niobium was first used commercially. [[Brazil]] is the leading producer of niobium and [[ferroniobium]], an [[alloy]] of niobium and iron. Niobium is used mostly in alloys, the largest part in special [[steel]] such as that used in gas [[Pipeline transport|pipelines]]. Although alloys contain only a maximum of 0.1%, that small percentage of Niobium improves the strength of the steel. The temperature stability of niobium-containing [[superalloy]]s is important for its use in [[jet engine]]s and [[rocket engine]]s. Niobium is used in various [[Superconductivity|superconducting]] materials. These [[Type-II superconductor|superconducting alloy]]s, also containing [[titanium]] and tin, are widely used in the [[Superconducting magnet|superconducting magnets]] of [[Magnetic resonance imaging|MRI scanners]]. Other applications of niobium include its use in welding, nuclear industries, electronics, optics, [[numismatics]] and jewellery. In the last two applications, niobium's low toxicity and ability to be coloured by [[Anodizing|anodisation]] are particular advantages. |
Revision as of 20:25, 16 April 2009
![]() | |||||||||||||||||||||||||||||||||||||||||
Niobium | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pronunciation | /naɪˈoʊbiəm/ | ||||||||||||||||||||||||||||||||||||||||
Appearance | Gray metallic, bluish when oxidized | ||||||||||||||||||||||||||||||||||||||||
Standard atomic weight Ar°(Nb) | |||||||||||||||||||||||||||||||||||||||||
Niobium in the periodic table | |||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||
Atomic number (Z) | 41 | ||||||||||||||||||||||||||||||||||||||||
Group | group 5 | ||||||||||||||||||||||||||||||||||||||||
Period | period 5 | ||||||||||||||||||||||||||||||||||||||||
Block | d-block | ||||||||||||||||||||||||||||||||||||||||
Electron configuration | [Kr] 4d4 5s1 | ||||||||||||||||||||||||||||||||||||||||
Electrons per shell | 2, 8, 18, 12, 1 | ||||||||||||||||||||||||||||||||||||||||
Physical properties | |||||||||||||||||||||||||||||||||||||||||
Phase at STP | solid | ||||||||||||||||||||||||||||||||||||||||
Melting point | 2750 K (2477 °C, 4491 °F) | ||||||||||||||||||||||||||||||||||||||||
Boiling point | 5017 K (4744 °C, 8571 °F) | ||||||||||||||||||||||||||||||||||||||||
Density (at 20° C) | 8.582 g/cm3[3] | ||||||||||||||||||||||||||||||||||||||||
Heat of fusion | 30 kJ/mol | ||||||||||||||||||||||||||||||||||||||||
Heat of vaporization | 689.9 kJ/mol | ||||||||||||||||||||||||||||||||||||||||
Molar heat capacity | 24.60 J/(mol·K) | ||||||||||||||||||||||||||||||||||||||||
Vapor pressure
| |||||||||||||||||||||||||||||||||||||||||
Atomic properties | |||||||||||||||||||||||||||||||||||||||||
Oxidation states | −3, −1, 0, +1, +2, +3, +4, +5 (a mildly acidic oxide) | ||||||||||||||||||||||||||||||||||||||||
Electronegativity | Pauling scale: 1.6 | ||||||||||||||||||||||||||||||||||||||||
Ionization energies |
| ||||||||||||||||||||||||||||||||||||||||
Atomic radius | empirical: 146 pm | ||||||||||||||||||||||||||||||||||||||||
Covalent radius | 164±6 pm | ||||||||||||||||||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||||||||||||||||||
Other properties | |||||||||||||||||||||||||||||||||||||||||
Natural occurrence | primordial | ||||||||||||||||||||||||||||||||||||||||
Crystal structure | body-centered cubic (bcc) (cI2) | ||||||||||||||||||||||||||||||||||||||||
Lattice constant | a = 330.05 pm (at 20 °C)[3] | ||||||||||||||||||||||||||||||||||||||||
Thermal expansion | 7.07×10−6/K (at 20 °C)[3] | ||||||||||||||||||||||||||||||||||||||||
Thermal conductivity | 53.7 W/(m⋅K) | ||||||||||||||||||||||||||||||||||||||||
Electrical resistivity | 152 nΩ⋅m (at 0 °C) | ||||||||||||||||||||||||||||||||||||||||
Magnetic ordering | paramagnetic | ||||||||||||||||||||||||||||||||||||||||
Young's modulus | 105 GPa | ||||||||||||||||||||||||||||||||||||||||
Shear modulus | 38 GPa | ||||||||||||||||||||||||||||||||||||||||
Bulk modulus | 170 GPa | ||||||||||||||||||||||||||||||||||||||||
Speed of sound thin rod | 3480 m/s (at 20 °C) | ||||||||||||||||||||||||||||||||||||||||
Poisson ratio | 0.40 | ||||||||||||||||||||||||||||||||||||||||
Mohs hardness | 6.0 | ||||||||||||||||||||||||||||||||||||||||
Vickers hardness | 870–1320 MPa | ||||||||||||||||||||||||||||||||||||||||
Brinell hardness | 735–2450 MPa | ||||||||||||||||||||||||||||||||||||||||
CAS Number | 7440-03-1 | ||||||||||||||||||||||||||||||||||||||||
History | |||||||||||||||||||||||||||||||||||||||||
Naming | after Niobe in Greek mythology, daughter of Tantalus (tantalum) | ||||||||||||||||||||||||||||||||||||||||
Discovery | Charles Hatchett (1801) | ||||||||||||||||||||||||||||||||||||||||
First isolation | Christian Wilhelm Blomstrand (1864) | ||||||||||||||||||||||||||||||||||||||||
Recognized as a distinct element by | Heinrich Rose (1844) | ||||||||||||||||||||||||||||||||||||||||
Isotopes of niobium | |||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||
Niobium (Template:PronEng) (Greek mythology: Niobe, daughter of Tantalus), or columbium (/kəˈlʌmbiəm/), is the chemical element with the symbol Nb and the atomic number 41[citation needed]. A rare, soft, grey, ductile transition metal, niobium is found in the minerals pyrochlore, the main commercial source for niobium, and columbite.
Niobium has physical and chemical properties similar to those of the element tantalum, and the two are therefore difficult to distinguish. The English chemist Charles Hatchett reported a new element similar to tantalum in 1801, and named it columbium. In 1809, the English chemist William Hyde Wollaston wrongly concluded that tantalum and columbium were identical. The German chemist Heinrich Rose determined in 1846 that tantalum ores contain a second element, which he named niobium. In 1864 and 1865, a series of scientific findings clarified that niobium and columbium were the same element (as distinguished from tantalum), and for a century both names were used interchangeably. The name of the element was officially adopted as niobium in 1949.
It was not until the early 20th century that niobium was first used commercially. Brazil is the leading producer of niobium and ferroniobium, an alloy of niobium and iron. Niobium is used mostly in alloys, the largest part in special steel such as that used in gas pipelines. Although alloys contain only a maximum of 0.1%, that small percentage of Niobium improves the strength of the steel. The temperature stability of niobium-containing superalloys is important for its use in jet engines and rocket engines. Niobium is used in various superconducting materials. These superconducting alloys, also containing titanium and tin, are widely used in the superconducting magnets of MRI scanners. Other applications of niobium include its use in welding, nuclear industries, electronics, optics, numismatics and jewellery. In the last two applications, niobium's low toxicity and ability to be coloured by anodisation are particular advantages.
History
![](http://upload.wikimedia.org/wikipedia/commons/6/62/Charles_Hatchett.jpg)
Niobium was discovered by the English chemist Charles Hatchett in 1801.[5] He found a new element in a mineral sample that had been sent to England from Massachusetts in 1734 by a John Winthrop,[6] and named the mineral columbite and the new element columbium after Columbia, the poetical name for America.[7] The columbium discovered by Hatchett was probably a mixture of the new element with tantalum.[7]
Subsequently, there was considerable confusion[8] over the difference between columbium (niobium) and the closely related tantalum. In 1809, the English chemist William Hyde Wollaston compared the oxides derived from both columbium—columbite, with a density 5.918 g/cm3, and tantalum—tantalite, with a density 7.935 g/cm3, and concluded that the two oxides, despite the significant difference in density, were identical; thus he kept the name tantalum.[8] This conclusion was disputed in 1846 by the German chemist Heinrich Rose, who argued that there were two different elements in the tantalite sample, and named them after children of Tantalus: niobium (from Niobe, the goddess of tears), and pelopium (from Pelops).[9][10] This confusion arose from the minimal observed differences between tantalum and niobium. Both tantalum and niobium react with chlorine and traces of oxygen, including atmospheric concentrations, with niobium forming two compounds: the white volatile niobium pentachloride (NbCl5) and the non-volatile niobium oxychloride (NbOCl3). The claimed new elements pelopium, ilmenium and dianium[11] were in fact identical to niobium or mixtures of niobium and tantalum.[12]
The differences between tantalum and niobium were unequivocally demonstrated in 1864 by Christian Wilhelm Blomstrand,[12] and Henri Etienne Sainte-Claire Deville, as well as Louis J. Troost, who determined the formulas of some of the compounds in 1865[12][13] and finally by the Swiss chemist Jean Charles Galissard de Marignac[14] in 1866, who all proved that there were only two elements. These discoveries did not stop scientists from publishing articles about ilmenium until 1871.[15] De Marignac was the first to prepare the metal in 1864, when he reduced niobium chloride by heating it in an atmosphere of hydrogen.[16]
Although de Marignac was able to produce tantalum-free niobium on an increased scale by 1866, it was not until the early 20th century that niobium was first used commercially, in incandescent lamp filaments.[13] This use quickly became obsolete through the replacement of niobium with tungsten, which has a higher melting point and thus is preferable for use in incandescent lamps. The discovery that niobium improves the strength of steel was made in the 1920s, and this remains its predominant use.[13] In 1961 the American physicist Eugene Kunzler and coworkers at Bell Labs discovered that niobium-tin continues to exhibit superconductivity in the presence of strong electric currents and magnetic fields,[17] making it the first material known to support the high currents and fields necessary for making useful high-power magnets and electrically powered machinery. This discovery would allow—two decades later—the production of long multi-strand cables that could be wound into coils to create large, powerful electromagnets for rotating machinery, particle accelerators, or particle detectors.[18][19]
Columbium (symbol Cb[20]) was the name originally given to this element by Hatchett, and this name remained in use in American journals—the last paper published by American Chemical Society with columbium in its title dates from 1953[21]—while niobium was used in Europe. To end this confusion, the name niobium was chosen for element 41 at the 15th Conference of the Union of Chemistry in Amsterdam in 1949.[22] A year later this name was officially adopted by the International Union of Pure and Applied Chemistry (IUPAC) after 100 years of controversy, despite the chronological precedence of the name Columbium.[22] The latter name is still sometimes used in US industry.[23] This was a compromise of sorts;[22] the IUPAC accepted tungsten instead of wolfram, in deference to North American usage; and niobium instead of columbium, in deference to European usage. Not everyone agreed, and while many leading chemical societies and government organizations refer to it by the official IUPAC name, many leading metallurgists, metal societies, and the United States Geological Survey still refer to the metal by the original "columbium".[24][25]
Characteristics
Niobium is a lustrous, grey, ductile, paramagnetic metal in group 5 of the periodic table (see table to right),
Z | Element | No. of electrons/shell |
---|---|---|
23 | vanadium | 2, 8, 11, 2 |
41 | niobium | 2, 8, 18, 12, 1 |
73 | tantalum | 2, 8, 18, 32, 11, 2 |
105 | dubnium | 2, 8, 18, 32, 32, 11, 2 |
although it has an atypical configuration in its outermost electron shells compared to the rest of the members. (This can be observed in the neighborhood of niobium (41), ruthenium (44), rhodium (45), and palladium (46).)
The metal takes on a bluish tinge when exposed to air at room temperature for extended periods.[26] Despite presenting a high melting point in elemental form (2,468 °C), it has a low density in comparison to other refractory metals. Furthermore, it is corrosion resistant, exhibits superconductivity properties, and forms dielectric oxide layers. These properties— especially the superconductivity —are strongly dependent on the purity of the niobium metal.[27] When very pure, it is comparatively soft and ductile, but impurities make it harder.[28]
Niobium is slightly less electropositive and smaller[clarification needed] than its predecessor in the periodic table, zirconium, while it is virtually identical in size to the heavier tantalum as a consequence of the lanthanide contraction.[28] As a result, niobium's chemical properties are very similar to the chemical properties of tantalum, which appears directly below niobium in the periodic table.[13] Although its corrosion resistance is not as outstanding as that of tantalum, its lower price and greater availability make niobium attractive for less exact uses such as linings in chemical plants.[28]
Isotopes
Naturally occurring niobium is composed of one stable isotope, 93Nb.[29] As of 2003, at least 32 radioisotopes have also been synthesized, ranging in atomic mass from 81 to 113. The most stable of these is 92Nb with a half-life of 34.7 million years. One of the least stable is 113Nb, with an estimated half-life of 30 milliseconds. Isotopes that are lighter than the stable 93Nb tend to decay by β+ decay, and those that are heavier tend to decay by β- decay, with some exceptions. 81Nb, 82Nb, and 84Nb have minor β+ delayed proton emission decay paths, 91Nb decays by electron capture and positron emission, and 92Nb decays by both β+ and β- decay.[29]
At least 25 nuclear isomers have been described, ranging in atomic mass from 84 to 104. Within this range, only 96Nb, 101Nb, and 103Nb do not have isomers. The most stable of niobium's isomers is 93mNb with a half-life of 16.13 years. The least stable isomer is 84mNb with a half-life of 103 ns. All of niobium's isomers decay by isomeric transition or beta decay except 92m1Nb, which has a minor electron capture decay chain.[29]
Chemistry
Niobium is in many ways similar to its predecessors in group 5. It reacts with most nonmetals at high temperatures: niobium reacts with fluorine at room temperature, with chlorine and hydrogen at 200 °C, and with nitrogen at 400 °C, giving products that are frequently interstitial and nonstoichiometric.[28] The metal begins to oxidize in air at 200 °C,[30] and is resistant to corrosion by fused alkalis and by acids, including aqua regia, chlorhydric, sulfuric, nitric and phosphoric acids.[28] Niobium is attacked by hot, concentrated mineral acids, such as fluorhydric acid and fluorhydric/nitric acid mixtures. Although niobium exhibits all the formal oxidation states from +5 down to -1, its most stable state is +5.[28]
Niobium is able to form oxides with the oxidation states +5 (Nb2O5), +4 (NbO2) and +3 (Nb2O3),[30] as well as with the rarer oxidation state +2 (NbO).[31] The most stable oxidation state is +5, the pentoxide which, along with the dark green non-stoichiometric dioxide, is the most common of the oxides.[30] Niobium pentoxide is used mainly in the production of capacitors, optical glass, and as starting material for several niobium compounds.[32] The compounds are created by dissolving the pentoxide in basic hydroxide solutions or by melting it in another metal oxide. Examples are lithium niobate (LiNbO3) and lanthanum niobate (LnNbO4). In the lithium niobate, the niobate ion NbO3− is not alone but part of a perovskite-like structure, while the lanthanum niobate contains lone NbO43− ions.[30] Lithium niobate, which is a ferroelectric, is used extensively in mobile telephones and optical modulators, and for the manufacture of surface acoustic wave devices. It belongs to the ABO3 structure ferroelectrics like lithium tantalate and barium titanate.[33]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/be/Niobium_pentachloride.jpg/220px-Niobium_pentachloride.jpg)
Niobium forms halogen compounds in the oxidation states of +5, +4, and +3 of the type NbX
5, NbX
4, and NbX
3, although multi-core complexes and substoichiometric compounds are also formed.[30][34] Niobium pentafluoride (NbF5) is a white solid with a melting point of 79.0 °C and niobium pentachloride (NbCl5) is a yellowish-white solid (see image at left) with a melting point of 203.4 °C. Both are hydrolyzed by water and react with additional niobium at elevated temperatures by forming the black and highly hygroscopic niobium tetrafluoride (NbF4) and niobium tetrachloride (NbCl4). While the trihalogen compounds can be obtained by reduction of the pentahalogens with hydrogen, the dihalogen compounds do not exist.[30] Spectroscopically, the monochloride (NbCl) has been observed at high temperatures.[35] The fluorides of niobium can be used after its separation from tantalum.[36] The niobium pentachloride is used in organic chemistry as a Lewis acid in activating alkenes for the carbonyl-ene reaction and the Diels-Alder reaction.[37] The pentachloride is also used to generate the organometallic compound niobocene dichloride ((C
5H
5)
2NbCl
2), which in turn is used as a starting material for other organoniobium compounds.[38]
Other binary compounds of niobium include niobium nitride (NbN), which becomes a superconductor at low temperatures and is used in detectors for infrared light,[39] and niobium carbide, an extremely hard, refractory, ceramic material, commercially used in tool bits for cutting tools. The compounds niobium-germanium (Nb
3Ge) and niobium-tin (Nb
3Sn), as well as the niobium-titanium alloy, are used as a type II superconductor wire for superconducting magnets.[40][41] Niobium sulfide as well as a few interstitial compounds of niobium with silicon are also known.[28]
Occurrence
According to estimates, niobium is 33rd on the list of the most common elements in the Earth’s crust with 20 ppm.[42] The abundance on Earth should be much greater, but the “missing” niobium may be located in the Earth’s core due to the metal's high density.[24] The free element is not found in nature, but it does occur in minerals.[28] Minerals that contain niobium often also contain tantalum, for example, columbite ((Fe,Mn)(Nb,Ta)2O6), columbite-tantalite (or coltan, (Fe,Mn)(Ta,Nb)2O6) and pyrochlore ((Na,Ca)2Nb2O6(OH,F)).[36] Columbite-tantalite minerals are most usually found as accessory minerals in pegmatite intrusions, and in alkaline intrusive rocks. Less common are the niobates of calcium, uranium, thorium and the rare earth elements such as pyrochlore and euxenite ((Y,Ca,Ce,U,Th)(Nb,Ta,Ti)2O6). These large deposits of niobium have been found associated with carbonatites (carbonate-silicate igneous rocks) and as a constituent of pyrochlore.[43]
The two largest deposits of pyrochlore were found in the 1950s in Brazil and Canada, and both countries are still the major producers of niobium mineral concentrates.[13] The largest deposit is hosted within a carbonatite intrusion at Araxá, Minas Gerais Brazil, owned by CBMM (Companhia Brasileira de Metalurgia e Mineração); the other deposit is located at Catalão, Goiás owned by Anglo American plc (through its subsidiary Mineração Catalão), also hosted within a carbonatite intrusion.[44] Altogether these two Brazilian mines produce around 75% of world supply. The third largest producer of niobium is the carbonatite-hosted Niobec Mine, Saint-Honoré near Chicoutimi, Quebec owned by Iamgold Corporation Ltd, which produces around 7% of world supply.[44]
Extensive though unexploited resources are located in Nigeria, Democratic Republic of Congo, Malawi, Australia and in Russia.
Production
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/53/World_Niobium_Production_2006.svg/300px-World_Niobium_Production_2006.svg.png)
After the separation from the other minerals, the mixed oxides of tantalum Ta2O5 and niobium Nb2O5 are obtained. The first step in the processing is the reaction of the oxides with hydrofluoric acid:[36]
- Ta2O5 + 14HF → 2H2[TaF7] + 5H2O, and
- Nb2O5 + 10HF → 2H2[NbOF5] + 3H2O
The first industrial scale separation, developed by de Marignac, used the difference in solubility between the complex niobium and tantalum fluorides, dipotassium oxypentafluoroniobate monohydrate (K2[NbOF5]·H2O) and dipotassium heptafluorotantalate (K2[TaF7]) in water. Newer processes use the liquid extraction of the fluorides from aqueous solution by organic solvents like cyclohexanone.[36] The complex niobium and tantalum fluorides are extracted separately from the organic solvent with water and either precipitated by the addition of potassium fluoride to produce a potassium fluoride complex, or precipitated with ammonia as the pentoxide:[30]
- H2[NbOF5] + 2KF → K2[NbOF5]↓ + 2HF, then
- 2H2[NbOF5] + 10NH4OH → Nb2O5↓ + 10NH4F + 7H2O
Several methods are used for the reduction to metallic niobium. The electrolysis of a molten mixture of K2[NbOF5] and sodium chloride is one; the other is the reduction of the fluoride with sodium. With this method niobium with a relatively high purity can be obtained. In large scale production the reduction of Nb2O5 with hydrogen or carbon[30] is used. In the process involving the aluminothermic reaction a mixture of iron oxide and niobium oxide is reacted with aluminium:
- 3Nb2O5 + Fe2O3 + 12Al → 6Nb + 2Fe + 6Al2O3
To enhance the reaction, small amounts of oxidizers like sodium nitrate are added. The result is aluminium oxide and ferroniobium, an alloy of iron and niobium used in the steel production.[45][46] The ferroniobium contains between 60 and 70% of niobium.[44] Without addition of iron oxide, aluminothermic process is used for the production of niobium. Further purification is necessary to reach the grade for superconductive alloys. Electron beam melting under vacuum is the method used by the two major distributors of niobium.[34][47]
The United States Geological Survey estimates that the production increased from 38,700 metric tonnes in 2005 to 44,500 tonnes in 2006.[48][49] The world wide resources are estimated to be 4,400,000 tonnes.[49] During the ten year period between 1995 and 2005, the production more than doubled starting from 17,800 tonnes in 1995.[50]
Applications
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f4/Niobium_metal.jpg/220px-Niobium_metal.jpg)
It is estimated that out of 44,500 metric tons of niobium mined in 2006, 90% ended up in the production of high-grade structural steel, followed by its use in superalloys.[51] The use of niobium alloys for superconductors and in electronic components account only for a small share of the production.[51]
Steel production
Niobium is an effective microalloying element for steel. Adding niobium to the steel causes the formation of niobium carbide and niobium nitride within the structure of the steel.[24] These compounds improve the grain refining, retardation of recrystallization, and precipitation hardening of the steel. These effects in turn increase the toughness, strength, formability, and weldability of the microalloyed steel.[24] Microalloyed stainless steels have a niobium content of less than 0.1%.[52] It is an important alloy addition to high strength low alloy steels which are widely used as structural components in modern automobiles.[24] These niobium containing alloys are strong and are often used in pipeline construction.[53][54]
Superalloys
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c0/Apollo_CSM_lunar_orbit.jpg/220px-Apollo_CSM_lunar_orbit.jpg)
Appreciable amounts of the element, either in its pure form or in the form of high-purity ferroniobium and nickel niobium, are used in nickel-, cobalt-, and iron-base superalloys for such applications as jet engine components, gas turbines, rocket subassemblies, and heat resisting and combustion equipment. Niobium precipitates a hardening γ''-phase within the grain structure of the superalloy.[55] The alloys contain up to 6.5% niobium.[52] One example of a nickel-based niobium-containing superalloy is Inconel 718, which consists of roughly 50% nickel, 18.6% chromium, 18.5% iron, 5% niobium, 3.1% molybdenum, 0.9% titanium, and 0.4% aluminium.[56][57] These superalloys are used, for example, in advanced air frame systems such as those used in the Gemini program.
An alloy used for liquid rocket thruster nozzles, such as in the main engine of the Apollo Lunar Modules, is C103, which consists of 89% niobium, 10% hafnium and 1% titanium.[58] Another niobium alloy was used for the nozzle of the Apollo Service Module. As niobium is oxidized at temperatures above 400 °C, a protective coating is necessary for these applications to prevent the alloy from becoming brittle.[58]
Superconducting magnets
Niobium becomes a superconductor when lowered to cryogenic temperatures. At atmospheric pressure, it has the highest critical temperature of the elemental superconductors: 9.2 K.[59] Niobium has the largest magnetic penetration depth of any element.[59] In addition, it is one of the three elemental Type II superconductors, along with vanadium and technetium. Niobium-tin and niobium-titanium alloys are used as wires for superconducting magnets capable of producing exceedingly strong magnetic fields. These superconducting magnets are used in magnetic resonance imaging and nuclear magnetic resonance instruments as well as in particle accelerators.[60] For example, the Large Hadron Collider uses 600 metric tons of superconducting strands, while the International Thermonuclear Experimental Reactor is estimated to use 600 metric tonnes of Nb3Sn strands and 250 metric tonnes of NbTi strands.[61] In 1992 alone, niobium-titanium wires were used to construct more than 1 billion US dollars worth of clinical magnetic resonance imaging systems.[18]
Numismatics
![](http://upload.wikimedia.org/wikipedia/en/c/c9/2004_Austria_25_Euro_150_Years_Semmering_Alpine_Railway_front.jpg)
Niobium is used as a precious metal in commemorative coins, often with silver or gold. For example, Austria produced a series of silver niobium euro coins starting in 2003; the colour in these coins is created by diffraction of light by a thin oxide layer produced by anodising. In 2008, six coins are available showing a broad variety of colours in the centre of the coin: blue, green, brown, purple, violet, or yellow. Two more examples are the 2004 Austrian 25 euro 150 Years Semmering Alpine Railway commemorative coin,[62] and the 2006 Austrian 25 euro European Satellite Navigation commemorative coin.[63] Latvia produced a similar series of coins starting in 2004,[64] with one following in 2007.[65]
Other uses
Niobium and some niobium alloys are used in medical devices such as pacemakers, because they are physiologically inert (and thus hypoallergenic).[66] Niobium treated with sodium hydroxide forms a porous layer that aids osseointegration.[67] Along with titanium, tantalum, and aluminium, niobium can also be electrically heated and anodized, resulting in a wide array of colours using a process known as reactive metal anodizing which is useful in making jewelry.[68][69] The fact that niobium is hypoallergenic also benefits its use in jewelry.[70]
The arc-tube seals of high pressure sodium vapor lamps are made from niobium, or niobium with 1% of zirconium, because niobium has a very similar coefficient of thermal expansion to the sintered alumina arc tube ceramic, a translucent material which resists chemical attack or reduction by the hot liquid sodium and sodium vapour contained inside the operating lamp.[71][72][73] The metal is also used in arc welding rods for some stabilized grades of stainless steel.[74]
Niobium was evaluated as a cheaper alternative to tantalum in capacitors,[75] but tantalum capacitors are still predominant. Niobium is added to glass in order to attain a higher refractive index, a property of use to the optical industry in making thinner corrective glasses. The metal has a low capture cross-section for thermal neutrons;[76] thus it is used in the nuclear industries.[77]
The Superconducting Radio Frequency (RF) cavities used in the free electron lasers TESLA and XFEL are made from pure niobium.[78]
The high sensitivity of superconducting niobium nitride bolometers make them an ideal detector for electromagnetic radiation in the THz frequency band. These detectors were tested at the Heinrich Hertz Submillimeter Telescope, the South Pole Telescope, the Receiver Lab Telescope, and at APEX and are now used in the HIFI instrument on board the Herschel Space Observatory.[79]
Precautions
Niobium has no known biological role. While niobium dust is an eye and skin irritant and a potential fire hazard, elemental niobium on a larger scale is physiologically inert (and thus hypoallergenic) and harmless. It is frequently used in jewelry and has been tested for use in some medical implants.[80][81]
Niobium-containing compounds are rarely encountered by most people, but some are toxic and should be treated with care. The short and long term exposure to niobates and niobium chloride, two chemicals that are water soluble, have been tested in rats. Rats treated with a single injection of niobium pentachloride or niobates show a median lethal dose (LD50) between 10 and 100 mg/kg.[82][83][84] For oral administration the toxicity is lower; a study with rats yielded a LD50 after seven days of 940 mg/kg.[82]
References
- ^ "Standard Atomic Weights: Niobium". CIAAW. 2017.
- ^ Prohaska, Thomas; Irrgeher, Johanna; Benefield, Jacqueline; Böhlke, John K.; Chesson, Lesley A.; Coplen, Tyler B.; Ding, Tiping; Dunn, Philip J. H.; Gröning, Manfred; Holden, Norman E.; Meijer, Harro A. J. (2022-05-04). "Standard atomic weights of the elements 2021 (IUPAC Technical Report)". Pure and Applied Chemistry. doi:10.1515/pac-2019-0603. ISSN 1365-3075.
- ^ a b c Arblaster, John W. (2018). Selected Values of the Crystallographic Properties of Elements. Materials Park, Ohio: ASM International. ISBN 978-1-62708-155-9.
- ^ Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties" (PDF). Chinese Physics C. 45 (3): 030001. doi:10.1088/1674-1137/abddae.
- ^ Hatchett, Charles (1802). "Eigenschaften und chemisches Verhalten des von Charlesw Hatchett entdeckten neuen Metalls, Columbium". Annalen der Physik (in German). 11 (5): 120–122. doi:10.1002/andp.18020110507.
- ^ Griffith, William P. (2003). "Charles Hatchett FRS (1765-1847), Chemist and Discoverer of Niobium". Notes and Records of the Royal Society of London. 57 (3): 299. doi:10.1098/rsnr.2003.0216.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ a b Noyes, William Albert (1918). A Textbook of Chemistry. H. Holt & Co. p. 523.
- ^ a b Wollaston, William Hyde (1809). "On the Identity of Columbium and Tantalum". Philosophical Transactions of the Royal Society of London. 99: 246–252. doi:10.1098/rstl.1809.0017.
- ^ Rose, Heinrich (1844). "Ueber die Zusammensetzung der Tantalite und ein im Tantalite von Baiern enthaltenes neues Metall". Annalen der Physik (in German). 139 (10): 317–341. doi:10.1002/andp.18441391006.
- ^ Rose, Heinrich (1847). "Ueber die Säure im Columbit von Nordamérika". Annalen der Physik (in German). 146 (4): 572–577. doi:10.1002/andp.18471460410.
- ^ Kobell, V. (1860). "Ueber eine eigenthümliche Säure, Diansäure, in der Gruppe der Tantal- und Niob- verbindungen". Journal für Praktische Chemie. 79 (1): 291–303. doi:10.1002/prac.18600790145.
- ^ a b c Marignac, Blomstrand, H. Deville, L. Troost und R. Hermann (1866). "Tantalsäure, Niobsäure, (Ilmensäure) und Titansäure". Fresenius' Journal of Analytical Chemistry. 5 (1): 384–389. doi:10.1007/BF01302537.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ a b c d e Gupta, C. K. (1994). Extractive Metallurgy of Niobium. CRC Press. pp. 1–16. ISBN 0849360714.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Marignac, M. C. (1866). "Recherches sur les combinaisons du niobium". Annales de chimie et de physique (in French). 4 (8): 7–75.
- ^ Hermann, R. (1871). "Fortgesetzte Untersuchungen über die Verbindungen von Ilmenium und Niobium, sowie über die Zusammensetzung der Niobmineralien (Further research about the compounds of ilmenium and niobium, as well as the composition of niobium minerals)". Journal für Praktische Chemie (in German). 3 (1): 373–427. doi:10.1002/prac.18710030137.
- ^ "Niobium". Universidade de Coimbra. Retrieved 2008-09-05.
- ^ Geballe et al. (1993) gives a critical point at currents of 150 kiloamperes and magnetic fields of 8.8 tesla.
- ^ a b Geballe, Theodore H. (October 1993). "Superconductivity: From Physics to Technology". Physics Today. 46 (10): 52–56. doi:10.1063/1.881384.
{{cite journal}}
:|format=
requires|url=
(help) - ^ Matthias, B. T. (1954). "Superconductivity of Nb3Sn". Physical Review. 95: 1435–1435. doi:10.1103/PhysRev.95.1435.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Kòrösy, F. (1939). "Reaction of Tantalum, Columbium and Vanadium with Iodine". Journal of the American Chemical Society. 61 (4): 838–843. doi:10.1021/ja01873a018.
- ^ Ikenberry, Luther (1953). "Photometric Determination of Columbium, Tungsten, and Tantalum in Stainless Steels". Analytical Chemistry. 25 (9): 1340–1344. doi:10.1021/ac60081a011.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ a b c Rayner-Canham, Geoff (2008). "Naming elements after scientists: an account of a controversy". Foundations of Chemistry. 10 (1): 13–18. doi:10.1007/s10698-007-9042-1.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Clarke, F. W. (1914). "Columbium Versus Niobium". Science. 39 (995): 139–140. doi:10.1126/science.39.995.139. PMID 17780662.
- ^ a b c d e Patel, Zh. (2001). "Niobium for Steelmaking". Metallurgist. 45 (11–12): 477–480. doi:10.1023/A:1014897029026.
{{cite journal}}
:|format=
requires|url=
(help); Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Norman N., Greenwood (2003). "Vanadium to dubnium: from confusion through clarity to complexity". Catalysis Today. 78 (1–4): 5–11. doi:10.1016/S0920-5861(02)00318-8.
- ^ Lide, David R. (2004). "The Elements". CRC Handbook of Chemistry and Physics (85 ed.). CRC Press. pp. 4–21. ISBN 9780849304859.
- ^ Salles Moura, Hernane R. (2007). "Melting And Purification Of Niobium". AIP Conference Proceedings (927(Single Crystal - Large Grain Niobium Technology)). American Institute of Physics: 165–178. ISSN 0094-243X.
{{cite journal}}
: Unknown parameter|coauthor=
ignored (|author=
suggested) (help) - ^ a b c d e f g h Nowak, Izabela; Ziolek, Maria (1999). "Niobium Compounds: Preparation, Characterization, and Application in Heterogeneous Catalysis". Chemical Reviews. 99 (12): 3603–3624. doi:10.1021/cr9800208.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ a b c Georges, Audi (2003). "The NUBASE Evaluation of Nuclear and Decay Properties". Nuclear Physics A. 729. Atomic Mass Data Center: 3–128. doi:10.1016/j.nuclphysa.2003.11.001.
- ^ a b c d e f g h Holleman, Arnold F. (1985). "Niob". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 1075–1079. ISBN 3110075113.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help)CS1 maint: extra punctuation (link) - ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
- ^ Cardarelli, Francois (2008). Materials Handbook. Springer London. ISBN 978-1-84628-668-1.
- ^ Volk, Tatyana (2008). Lithium Niobate: Defects, Photorefraction and Ferroelectric Switching. Springer. pp. 1–9. ISBN 9783540707653.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ a b Agulyansky, Anatoly (2004). The Chemistry of Tantalum and Niobium Fluoride Compounds. Elsevier. pp. 1–11. ISBN 9780444516046.
- ^ Ram, R.S. (2004). "Fourier transform emission spectroscopy and ab initio calculations on NbCl" (PDF). Journal of Molecular Spectroscopy. 228: 544–553.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ a b c d Soisson, Donald J. (1961). "Staff-Industry Collaborative Report: Tantalum and Niobium". Industrial and Engineering Chemistry. 53 (11): 861–868. doi:10.1021/ie50623a016.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Andrade, C. K. Z.; Rocha, R. O.; Russowsky, D.; & Godoy, M. N. (2005). "Studies on the Niobium Pentachloride-Mediated Nucleophilic Additions to an Enantiopure Cyclic N-acyliminium Ion Derived from (S)-malic acid" (PDF). Journal of the Brazilian Chemical Society. 16: 535–539. doi:10.1590/S0103-50532005000400007.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ C. R. Lucas, J. A. Labinger, J. Schwartz (1990). Robert J. Angelici (ed.). "Dichlorobis(η5-Cyclopentadienyl)Niobium(IV)". Inorganic Syntheses. 28. New York: J. Wiley & Sons: 267–270. doi:10.1002/9780470132593.ch68. ISBN 0-471-52619-3.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ Verevkin, A. (2004). "Ultrafast superconducting single-photon detectors for near-infrared-wavelength quantum communications". Journal of Modern Optics. 51 (12): 1447–1458. doi:10.1080/09500340410001670866.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Lindenhovius, J.L.H. (2000). "Powder-in-tube (PIT) Nb/sub 3/Sn conductors for high-field magnets". IEEE Transactions on Applied Superconductivity. 10: 975–978. doi:10.1109/77.828394.
- ^ Nave, Carl R. "Superconducting Magnets". Georgia State University, Department of Physics and Astronomy. Retrieved 2008-11-25.
- ^ Emsley, John (2001). "Niobium". Nature's Building Blocks: An A-Z Guide to the Elements. Oxford, England, UK: Oxford University Press. pp. 283–286. ISBN 0198503407.
- ^ Lumpkin, Gregory R. (1995). "Geochemical alteration of pyrochlore group minerals: Pyrochlore subgroup" (PDF). American Mineralogist. 80: 732–743.
{{cite journal}}
: Unknown parameter|coauthor=
ignored (|author=
suggested) (help) - ^ a b c Kouptsidis, J. "Niob für TESLA" (PDF) (in German). Deutsches Elektronen-Synchrotron DESY. Retrieved 2008-09-02.
{{cite web}}
: Unknown parameter|coauthor=
ignored (|author=
suggested) (help) - ^ Tither, Geoffrey (2001). Minerals, Metals and Materials Society, Metals and Materials Society Minerals (ed.). "Progress in Niobium Markets and Technology 1981–2001" ([dead link] – Scholar search). Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA). Niobium 2001 Ltd, 2002. ISBN 9780971206809.
{{cite journal}}
: External link in
(help)CS1 maint: date and year (link) CS1 maint: multiple names: editors list (link)|format=
- ^ Dufresne, Claude (2001). Minerals, Metals and Materials Society, Metals and Materials Society Minerals (ed.). "The Production of Ferroniobium at the Niobec mine 1981–2001" ([dead link] – Scholar search). Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA). Niobium 2001 Ltd, 2002. ISBN 9780971206809.
{{cite journal}}
: External link in
(help); Unknown parameter|format=
|coauthor=
ignored (|author=
suggested) (help)CS1 maint: date and year (link) CS1 maint: multiple names: editors list (link) - ^ Choudhury, Alok (1992). "Electron Beam Melting and Refining of Metals and Alloys". The Iron and Steel Institute of Japan International. 32 (5): 673–681.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Papp, John F. "Niobium (Columbium)" (PDF). USGS 2006 Commodity Summary. Retrieved 2008-11-20.
- ^ a b Papp, John F. "Niobium (Columbium)" (PDF). USGS 2007 Commodity Summary. Retrieved 2008-11-20.
- ^ Papp, John F. "Niobium (Columbium)" (PDF). USGS 1997 Commodity Summary. Retrieved 2008-11-20.
- ^ a b Papp, John F. "Niobium (Columbium ) and Tantalum" (PDF). USGS 2006 Minerals Yearbook. Retrieved 2008-09-03.
- ^ a b Heisterkamp, Friedrich (2001). Minerals, Metals and Materials Society, Metals and Materials Society Minerals (ed.). "Niobium: Future Possibilities – Technology and the Market Place" ([dead link] – Scholar search). Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA). Niobium 2001 Ltd, 2002. ISBN 9780971206809.
{{cite journal}}
: External link in
(help); Unknown parameter|format=
|coauthors=
ignored (|author=
suggested) (help)CS1 maint: date and year (link) CS1 maint: multiple names: editors list (link) - ^ Eggert, Peter (1982). "Niobium: a steel additive with a future". Economic Bulletin. 19 (9): 8–11. doi:10.1007/BF02227064.
{{cite journal}}
:|format=
requires|url=
(help); Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Hillenbrand, Hans–Georg (2001-05-02). "Development and Production of High Strength Pipeline Steels" (PDF). Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA). Europipe.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Donachie, Matthew J. (2002). Superalloys: A Technical Guide. ASM International. pp. 29–30. ISBN 9780871707499.
- ^ Bhadeshia, H. K. D. H. "Nickel Based Superalloys". University of Cambridge. Retrieved 2008-09-04.
- ^ Pottlacher, G. (2002). "Thermophysikalische Eigenschaften von festem und flüssigem Inconel 718". Thermochimica Acta (in German). 382: 55–267. doi:10.1016/S0040-6031(01)00751-1.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help); Unknown parameter|issues=
ignored (help) - ^ a b Hebda, John (2001-05-02). "Niobium alloys and high Temperature Applications" ([dead link] – Scholar search). Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA). Companhia Brasileira de Metalurgia e Mineração.
{{cite journal}}
: External link in
(help)|format=
- ^ a b Peiniger, M. (1985). "A Superconducting Nb3Sn Coated Multicell Accelerating Cavity". Nuclear Science. 32 (5): 3610. doi:10.1109/TNS.1985.4334443.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Glowacki, B. A. (2002). "Niobium based intermetallics as a source of high-current/high magnetic field superconductors". Physica C: Superconductivity. 372–376 (3): 1315–1320. doi:10.1016/S0921-4534(02)01018-3.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Grunblatt, G. (2005). "A success story: LHC cable production at ALSTOM-MSA". Fusion Engineering and Design (Proceedings of the 23rd Symposium of Fusion Technology). 75–79: 1–5. doi:10.1016/j.fusengdes.2005.06.216.
{{cite journal}}
: Unknown parameter|coauthor=
ignored (|author=
suggested) (help) - ^ "25 Euro - 150 Years Semmering Alpine Railway (2004)". Austrian Mint. Retrieved 2008-11-04.
- ^ "150 Jahre Semmeringbahn" (in German). Austrian Mint. Retrieved 2008-09-04.
- ^ "Coin of Time". Bank of Latvia. Retrieved 2008-09-19.
{{cite web}}
: Cite has empty unknown parameter:|1=
(help) - ^ "Coin of Time II". Bank of Latvia. Retrieved 2008-09-19.
- ^ Mallela, Venkateswara Sarma (2004). "Trends in Cardiac Pacemaker Batteries" (PDF). Indian Pacing Electrophysiol J. 4 (4): 201–212. PMID 16943934.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help); Unknown parameter|day=
ignored (help); Unknown parameter|month=
ignored (help) - ^ Godley, Reut (2004). "Bonelike apatite formation on niobium metal treated in aqueous NaOH" (PDF). Journal of Materials Science: Materials in Medicine. 15: 1073–1077. doi:10.1023/B:JMSM.0000046388.07961.81.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Biason Gomes, M. A. (1991). "Anodization of niobium in sulphuric acid media". Journal of Applied Electrochemistry. 21 (11): 1023–1026. doi:10.1007/BF01077589.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Chiou, Y. L. (1971). "A note on the thicknesses of anodized niobium oxide films". Thin Solid Films. 8 (4): R37–R39. doi:10.1016/0040-6090(71)90027-7.
- ^ Azevedo, C. R. F. (2002). "Characterization of metallic piercings that caused adverse reactions during use". Journal of Failure Analysis and Prevention. 2 (4): 47–53. doi:10.1007/BF02715453.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help); Unknown parameter|doi_brokendate=
ignored (|doi-broken-date=
suggested) (help) - ^ Henderson, Stanley Thomas (1972). Lamps and Lighting. Edward Arnold Press. pp. 244–245. ISBN 0-7131-3267-1.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Eichelbrönner, G. (1998). "Refractory metals: crucial components for light sources". International Journal of Refractory Metals and Hard Materials. 16 (1): 5–11. doi:10.1016/S0263-4368(98)00009-2.
{{cite journal}}
:|format=
requires|url=
(help) - ^ Michaluk, Christopher A. (2001). Minerals, Metals and Materials Society, Metals and Materials Society Minerals (ed.). "Niobium and Niobium 1% Zirconium for High Pressure Sodium (HPS) Discharge Lamps". Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA). Niobium 2001 Ltd, 2002. ISBN 9780971206809.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help)CS1 maint: date and year (link) CS1 maint: multiple names: editors list (link) - ^ US patent 5254836, Okada, Yuuji; Kobayashi, Toshihiko; Sasabe, Hiroshi; Aoki, Yoshimitsu; Nishizawa, Makoto; Endo, Shunji, "Method of arc welding with a ferrite stainless steel welding rod", issued 1993-10-19
- ^ Pozdeev, Y. (1991). "Reliability comparison of tantalum and niobium solid electrolytic capacitors". Quality and Reliability Engineering International. 14 (2): 79–82. doi:10.1002/(SICI)1099-1638(199803/04)14:2<79::AID-QRE163>3.0.CO;2-Y.
- ^ Jahnke, L.P. (1960). "Columbium Alloys Today". Metal Progr. 77 (6): 69–74.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Nikulina, A. V. (2003). "Zirconium-Niobium Alloys for Core Elements of Pressurized Water Reactors". Metal Science and Heat Treatment. 45 (7–8): 287–292. doi:10.1023/A:1027388503837.
- ^ Lilje, L. (2004). "Achievement of 35 MV/m in the superconducting nine-cell cavities for TESLA". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 524: 1–12. doi:10.1016/j.nima.2004.01.045.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help); Unknown parameter|issues=
ignored (help) - ^ Cherednichenko, Sergey (2008). "A Hot-electron bolometer terahertz mixers for the Herschel Space Observatory". Review of Scientific Instruments. 79: 0345011–03451010. doi:10.1063/1.2890099.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Vilaplana, J. (1990). "New trends in the use of metals in jewellery". Contact Dermatitis. 25 (3): 145–148. doi:10.1111/j.1600-0536.1991.tb01819.x.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Vilaplana, J. (1998). "New developments in jewellery and dental materials". Contact Dermatitis. 39 (2): 55–57. doi:10.1111/j.1600-0536.1998.tb05832.x.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ a b Haley, Thomas J. (1962). "Pharmacology and toxicology of niobium chloride". Toxicology and Applied Pharmacology. 4 (3): 385–392. doi:10.1016/0041-008X(62)90048-0.
{{cite journal}}
: Unknown parameter|coauthor=
ignored (|author=
suggested) (help) - ^ Downs, William L. (1965). "The Toxicity of Niobium Salts". American Industrial Hygiene Association Journal. 26 (4): 337–346. doi:10.1080/00028896509342740.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Schroeder, Henry A. (1970). "Zirconium, Niobium, Antimony, Vanadium and Lead in Rats: Life term studies". Journal of Nutrition. 100 (1): 59–68. PMID 5412131.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help); Unknown parameter|day=
ignored (help); Unknown parameter|month=
ignored (help)
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/99/Wiktionary-logo-en-v2.svg/40px-Wiktionary-logo-en-v2.svg.png)
- Los Alamos National Laboratory – Niobium
- WebElements.com – Niobium
- Tantalum-Niobium International Study Center
- Niobium for particle accelerators eg ILC. 2005