Conversion of units refers to conversion factors between different units of measurement for the same quantity .
Techniques
Process
The process of conversion depends on the specific situation and the intended purpose. This may be governed by regulation, contract , Technical specifications or other published standards . Engineering judgment may include such factors as:
Some conversions from one system of units to another need to be exact, without increasing or decreasing the precision of the first measurement. This is sometimes called soft conversion . It does not involve changing the physical configuration of the item being measured.
By contrast, a hard conversion or an adaptive conversion may not be exactly equivalent. It changes the measurement to convenient and workable numbers and units in the new system. It sometimes involves a slightly different configuration, or size substitution, of the item.
Multiplication Factors
Conversion between units in the metric (SI ) system can be discerned by their prefixes (for example, 1 kilogram = 1000 grams, 1 milligram = 0.001 grams) and are thus not listed in this article. Exceptions are made if the unit is commonly known by another name (for example, 1 micron = 10−6 metre). For a full listing of multiplication factors, see SI prefix .
Table Ordering
Within each table, the units are listed alphabetically, and the SI units (base or derived) are highlighted.
Tables of conversion factors
This article gives lists of conversion factors for each of a number of physical quantities, which are listed in the index. For each physical quantity, a number of different units (some only of historical interest) are shown and expressed in terms of the corresponding SI unit.
Legend
Symbol
Definition
≡
exactly equal to
≈
approximately equal to
digits
indicates that digits repeat infinitely (e.g. 8.294 369 corresponds to 8.294 369 369 369 369… )
(H)
of chiefly historical interest
Length
Length
Name of unit
Symbol
Definition
Relation to SI units
ångström
Å
≡ 1× 10−10 m
= 0.1 nm
astronomical unit
AU
≈ Distance from Earth to Sun
≈ 149 597 871 464 m [ 1]
barleycorn (H)
≡ ⅓ in (see note above about rounding)
= 8.46 × 10 −3 m
bohr, atomic unit of length
a0
≡ Bohr radius of hydrogen
≈ 5.291 772 0859× 10−11 ± 3.6× 10−20 m [ 2]
cable length (Imperial)
≡ 608 ft
= 185.3184 m
cable length (International)
≡ 1/10 nmi
= 185.2 m
cable length (U.S.)
≡ 720 ft
= 219.456 m
chain (Gunter's ; Surveyor's)
ch
≡ 66 ft ≡ 4 rods [ 3]
= 20.1168 m
cubit (H)
≡ Distance from fingers to elbow ≈ 18in
≈ 0.5 m
ell (H)
ell
≡ 45 in [ 3]
= 1.143 m
fathom
fm
≡ 6 ft [ 3]
= 1.8288 m
fermi
fm
≡ 1× 10−15 m [ 3]
= 1× 10−15 m
finger
≡ 7/8 in
= 0.022 225 m
finger (cloth)
≡ 4½ in
= 0.1143 m
foot (Benoît) (H)
ft (Ben)
≈ 0.304 799 735 m
foot (Clarke's; Cape) (H)
ft (Cla)
≈ 0.304 797 2654 m
foot (Indian) (H)
ft Ind
≈ 0.304 799 514 m
foot (International)
ft
≡ ⅓ yd = 12 inches
= 0.3048 m
foot (Sear's) (H)
ft (Sear)
≈ 0.304 799 47 m
foot (U.S. Survey)
ft (US)
≡ 1 200/3 937 m [ 4]
≈ 0.304 800 610 m
french ; charriere
F
≡ ⅓ mm
= 3.3 × 10−4 m
furlong
fur
≡ 10 chains = 660 ft = 220 yd [ 3]
= 201.168 m
hand
≡ 4 in [ 3]
= 0.1016 m
inch
in
≡ 1/36 yd = 1/12 ft
= 0.0254 m
league (land)
lea
≡ 3 US Statute miles [ 5]
= 4 828.032 m
light-day
≡ 24 light-hours
= 2.590 206 837 12× 10 13 m
light-hour
≡ 60 light-minutes
= 1.079 252 8488× 10 12 m
light-minute
≡ 60 light-seconds
= 1.798 754 748× 10 10 m
light-second
≡ Distance light travels in one second in vacuum
= 299 792 458 m
light-year
l.y.
≡ Distance light travels in vacuum in 365.25 days [ 6]
= 9.460 730 472 5808× 10 15 m
line
ln
≡ 1/12 in [ 7]
= 0.002 116 m
link (Gunter's; Surveyor's)
lnk
≡ 1/100 ch [ 3]
= 0.201 168 m
link (Ramsden's; Engineer's)
lnk
≡ 1 ft [ 3]
= 0.3048 m
metre (SI base unit )
m
≡ Distance light travels in 1/299 792 458 of a second in vacuum.[ 8]
= 1 m
mickey
≡ 1/200 in
= 1.27× 10−4 m
micron
µ
≡ 1× 10−6 m
mil; thou
mil
≡ 1× 10−3 in
= 2.54× 10−5 m
mil (Sweden and Norway)
mil
≡ 10 km
= 10 000 m
mile
mi
≡ 1 760 yd = 5 280 ft = 80 chains
= 1 609.344 m
mile (geographical) (H)
≡ 6 082 ft
= 1 853.7936 m
mile (telegraph) (H)
mi
≡ 6 087 ft
= 1 855.3176 m
mile (U.S. Survey)
mi
≡ 5 280 ft (US Survey feet)
= 5 280 × 1 200/3 937 m ≈ 1 609.347 219 m
nail (cloth)
≡ 2¼ in [ 3]
= 0.057 15 m
nautical league
NL; nl
≡ 3 nmi [ 3]
= 5 556 m
nautical mile (Admiralty)
NM (Adm); nmi (Adm)
≡ 6 080 ft
≡ 1 853.184 m
nautical mile (international)
NM; nmi
≡ 1 852 m [ 9]
= 1 852 m
pace
≡ 2.5 ft [ 3]
= 0.762 m
palm
≡ 3 in [ 3]
= 0.0762 m
parsec
pc
Distance of star with par allax shift of one arc sec ond from a base of one astronomical unit
≈ 3.085 677 82× 10 16 ± 6× 10 6 m [ 10]
pica
≡ 12 points
Dependent on point measures.
point (American, English) [ 11] [ 12]
pt
≡ 1/72.272 in
≈ 0.000 351 450 m
point (Didot; European) [ 12] [ 13]
pt
≡ 1/12 × 1/72 of pied du roi ; After 1878: ≡ 5/133 cm
≈ 0.000 375 97 m; After 1878: ≈ 0.000 375 939 85 m
point (PostScript ) [ 11]
pt
≡ 1/72 in
= 0.000 352 7 m
point (TeX ) [ 11]
pt
≡ 1/72.27 in
= 0.000 351 4598 m
quarter
≡ ¼ yd
= 0.2286 m
rod ; pole; perch (H)
rd
≡ 16½ ft
= 5.0292 m
rope (H)
rope
≡ 20 ft [ 3]
= 6.096 m
span (H)
≡ 9 in [ 3]
= 0.2286 m
spat [ 14]
≡ 1× 10 12 m
stick (H)
≡ 2 in
= 0.0508 m
stigma; bicron (picometre )
pm
≡ 1× 10−12 m
twip
twp
≡ 1/1 440 in
= 1.7638 × 10−5 m
x unit ; siegbahn
xu
≈ 1.0021× 10−13 m [ 3]
yard (International)
yd
≡ 0.9144 m [ 4] ≡ 3 ft ≡ 36 in
≡ 0.9144 m
Area
Area
Name of unit
Symbol
Definition
Relation to SI units
acre (international)
ac
≡ 1 ch × 10 ch = 4 840 sq yd
= 4 046.856 4224 m2
acre (U. S. survey)
ac
≡ 10 sq ch = 4 840 sq yd
= 4 046.873 m2 [ 15]
are
a
≡ 100 m2
= 100 m2
barn
b
≡ 10−28 m2
= 10−28 m2
barony
≡ 4 000 ac
= 1.618 742 568 96× 10 7 m2
board
bd
≡ 1 in × 1 ft
= 7.741 92× 10−3 m2
boiler horsepower equivalent direct radiation
bhp EDR
≡ (1 ft2 ) (1 bhp) / (240 BTUIT /h)
≈ 12.958 174 m2
circular inch
circ in
≡ π/4 sq in
≈ 5.067 075× 10−4 m2
circular mil; circular thou
circ mil
≡ π/4 mil2
≈ 5.067 075× 10−10 m2
cord
≡ 192 bd
= 1.486 448 64 m2
dunam
≡ 1 000 m2
= 1 000 m2
Guntha
≡ 33 ft x 33 ft[citation needed ]
≈ 101.17 m2
hectare
ha
≡ 10 000 m2
= 10 000 m2
hide
≈ 120 ac (variable)
≈ 5× 10 5 m2
rood
ro
≡ ¼ ac
= 1 011.714 1056 m2
shed
≡ 10−52 m2
= 10−52 m2
square (roofing)
≡ 10 ft × 10 ft
= 9.290 304 m2
square chain (international)
sq ch
≡ 66 ft × 66 ft = 1/10 ac
= 404.685 642 24 m2
square chain (U.S. Survey)
sq ch
≡ 66 ft(US) × 66 ft(US) = 1/10 ac
= 404.687 3 m2
square foot
sq ft
≡ 1 ft × 1 ft
= 9.290 304× 10−2 m2
square foot (U.S. Survey)
sq ft
≡ 1 ft (US) × 1 ft (US)
≈ 9.290 341 161 327 49× 10 −2 m2
square inch
sq in
≡ 1 in × 1 in
= 6.4516× 10−4 m2
square kilometre
km2
≡ 1 km × 1 km
= 106 m2
square link
sq lnk
≡ 1 lnk × 1 lnk
= 4.046 856 4224× 10−2 m2
square metre (SI unit)
m2
≡ 1 m × 1 m
= 1 m2
square mil; square thou
sq mil
≡ 1 mil × 1 mil
= 6.4516× 10−10 m2
square mile ; section
sq mi
≡ 1 mi × 1 mi
= 2.589 988 110 336× 10 6 m2
square mile (U.S. Survey)
sq mi
≡ 1 mi (US) × 1 mi (US)
≈ 2.589 998× 10 6 m2
square rod/pole/perch
sq rd
≡ 1 rd × 1 rd
= 25.292 852 64 m2
square yard
sq yd
≡ 1 yd × 1 yd
= 0.836 127 36 m2
stremma
≡ 1 000 m2
= 1 000 m2
township
≡ 36 sq mi (US)
≈ 9.323 994× 10 7 m2
yardland
≈ 30 ac
≈ 1.2× 10 5 m2
Volume
Volume
Name of unit
Symbol
Definition
Relation to SI units
acre-foot
ac ft
≡ 1 ac x 1 ft = 43 560 ft3
= 1 233.481 837 547 52 m3
acre-inch
≡ 1 ac × 1 in
= 102.790 153 128 96 m3
barrel (Imperial)
bl (Imp)
≡ 36 gal (Imp)
= 0.163 659 24 m3
barrel (petroleum)
bl; bbl
≡ 42 gal (US)
= 0.158 987 294 928 m3
barrel (U.S. dry)
bl (US)
≡ 105 qt (US) = 105/32 bu (US lvl)
= 0.115 628 198 985 075 m3
barrel (U.S. fluid)
fl bl (US)
≡ 31½ gal (US)
= 0.119 240 471 196 m3
board-foot
fbm
≡ 144 cu in
= 2.359 737 216× 10−3 m3
bucket (Imperial)
bkt
≡ 4 gal (Imp)
= 0.018 184 36 m3
bushel (Imperial)
bu (Imp)
≡ 8 gal (Imp)
= 0.036 368 72 m3
bushel (U.S. dry heaped)
bu (US)
≡ 1 ¼ bu (US lvl)
= 0.044 048 837 7086 m3
bushel (U.S. dry level)
bu (US lvl)
≡ 2 150.42 cu in
= 0.035 239 070 166 88 m3
butt , pipe
≡ 126 gal (wine)
= 0.476 961 884 784 m3
coomb
≡ 4 bu (Imp)
= 0.145 474 88 m3
cord (firewood )
≡ 8 ft × 4 ft × 4 ft
= 3.624 556 363 776 m3
cord-foot
≡ 16 cu ft
= 0.453 069 545 472 m3
cubic fathom
cu fm
≡ 1 fm × 1 fm × 1 fm
= 6.116 438 863 872 m3
cubic foot
cu ft
≡ 1 ft × 1 ft × 1 ft
= 0.028 316 846 592 m3
cubic inch
cu in
≡ 1 in × 1 in × 1 in
= 16.387 064× 10−6 m3
cubic metre (SI unit)
m3
≡ 1 m × 1 m × 1 m
= 1 m3
cubic mile
cu mi
≡ 1 mi × 1 mi × 1 mi
= 4 168 181 825.440 579 584 m3
cubic yard
cu yd
≡ 27 cu ft
= 0.764 554 857 984 m3
cup (breakfast)
≡ 10 fl oz (Imp)
= 284.130 625× 10−6 m3
cup (Canadian)
c (CA)
≡ 8 fl oz (Imp)
= 227.3045× 10−6 m3
cup (metric)
c
≡ 250.0× 10−6 m3
= 250.0× 10−6 m3
cup (U.S. customary)
c (US)
≡ 8 US fl oz ≡ 1/16 gal (US)
= 236.588 2365× 10−6 m3
cup (U.S. food nutrition labeling)
c (US)
≡ 240 mL[ 16]
= 2.4× 10−4 m3
dash (Imperial)
≡ 1/384 gi (Imp) = ½ pinch (Imp)
= 369.961 751 302 08 3 × 10−9 m3
dash (U.S.)
≡ 1/96 US fl oz = ½ US pinch
= 308.057 599 609 375× 10−9 m3
dessertspoon (Imperial)
≡ 1/12 gi (Imp)
= 11.838 776 0416 × 10−6 m3
drop (Imperial)
gtt
≡ 1/288 fl oz (Imp)
= 98.656 467 013 8 × 10−9 m3
drop (Imperial) (alt)
gtt
≡ 1/1 824 gi (Imp)
≈ 77.886 684× 10−9 m3
drop (medical)
≡ 1/12 ml
= 83.03 × 10−9 m3
drop (metric)
≡ 1/20 mL
= 50.0× 10−9 m3
drop (U.S.)
gtt
≡ 1/360 US fl oz
= 82.148 693 22916 × 10−9 m3
drop (U.S.) (alt)
gtt
≡ 1/456 US fl oz
≈ 64.854 231× 10−9 m3
fifth
≡ 1/5 US gal
= 757.082 3568× 10−6 m3
firkin
≡ 9 gal (US)
= 0.034 068 706 056 m3
fluid drachm (Imperial)
fl dr
≡ ⅛ fl oz (Imp)
= 3.551 632 8125× 10−6 m3
fluid dram (U.S.); U.S. fluidram
fl dr
≡ ⅛ US fl oz
= 3.696 691 195 3125× 10−6 m3
fluid ounce (Imperial)
fl oz (Imp)
≡ 1/160 gal (Imp)
= 28.413 0625× 10−6 m3
fluid ounce (U.S. customary)
US fl oz
≡ 1/128 gal (US)
= 29.573 529 5625× 10−6 m3
fluid ounce (U.S. food nutrition labeling)
US fl oz
≡ 30 mL[ 16]
= 3× 10−5 m3
fluid scruple (Imperial)
fl s
≡ 1/24 fl oz (Imp)
= 1.183 877 60416 × 10−6 m3
gallon (beer)
beer gal
≡ 282 cu in
= 4.621 152 048× 10−3 m3
gallon (Imperial)
gal (Imp)
≡ 4.546 09 L
= 4.546 09× 10−3 m3
gallon (U.S. dry)
gal (US)
≡ ⅛ bu (US lvl)
= 4.404 883 770 86× 10−3 m3
gallon (U.S. fluid; Wine)
gal (US)
≡ 231 cu in
= 3.785 411 784× 10−3 m3
gill (Imperial); Noggin
gi (Imp); nog
≡ 5 fl oz (Imp)
= 142.065 3125× 10−6 m3
gill (U.S.)
gi (US)
≡ 4 US fl oz
= 118.294 118 25× 10−6 m3
hogshead (Imperial)
hhd (Imp)
≡ 2 bl (Imp)
= 0.327 318 48 m3
hogshead (U.S.)
hhd (US)
≡ 2 fl bl (US)
= 0.238 480 942 392 m3
jigger (bartending)
≡ 1½ US fl oz
≈ 44.36× 10−6 m3
kilderkin
≡ 18 gal (Imp)
= 0.081 829 62 m3
lambda
λ
≡ 1 mm3
= 1× 10−9 m3
last
≡ 80 bu (Imp)
= 2.909 4976 m3
litre
L
≡ 1 dm3 [ 17]
= 0.001 m3
load
≡ 50 cu ft
= 1.415 842 3296 m3
minim (Imperial)
min
≡ 1/480 fl oz (Imp) = 1/60 fl dr (Imp)
= 59.193 880 208 3 × 10−9 m3
minim (U.S.)
min
≡ 1/480 US fl oz = 1/60 US fl dr
= 61.611 519 921 875× 10−9 m3
peck (Imperial)
pk
≡ 2 gal (Imp)
= 9.092 18× 10−3 m3
peck (U.S. dry)
pk
≡ ¼ US lvl bu
= 8.809 767 541 72× 10−3 m3
perch
per
≡ 16½ ft × 1½ ft × 1 ft
= 0.700 841 953 152 m3
pinch (Imperial)
≡ 1/192 gi (Imp) = ⅛ tsp (Imp)
= 739.923 502 60416 × 10−9 m3
pinch (U.S.)
≡ 1/48 US fl oz = ⅛ US tsp
= 616.115 199 218 75× 10−9 m3
pint (Imperial)
pt (Imp)
≡ ⅛ gal (Imp)
= 568.261 25× 10−6 m3
pint (U.S. dry)
pt (US dry)
≡ 1/64 bu (US lvl) ≡ ⅛ gal (US dry)
= 550.610 471 3575× 10−6 m3
pint (U.S. fluid)
pt (US fl)
≡ ⅛ gal (US)
= 473.176 473× 10−6 m3
pony
≡ 3/4 US fl oz
= 22.180 147 171 875× 10−6 m3
pottle; quartern
≡ ½ gal (Imp) = 80 fl oz (Imp)
= 2.273 045× 10−3 m3
quart (Imperial)
qt (Imp)
≡ ¼ gal (Imp)
= 1.136 5225× 10−3 m3
quart (U.S. dry)
qt (US)
≡ 1/32 bu (US lvl) = ¼ gal (US dry)
= 1.101 220 942 715× 10−3 m3
quart (U.S. fluid)
qt (US)
≡ ¼ gal (US fl)
= 946.352 946× 10−6 m3
quarter; pail
≡ 8 bu (Imp)
= 0.290 949 76 m3
register ton
≡ 100 cu ft
= 2.831 684 6592 m3
sack (Imperial); bag
≡ 3 bu (Imp)
= 0.109 106 16 m3 [citation needed ]
sack (U.S.)
≡ 3 bu (US lvl)
= 0.105 717 210 500 64 m3
seam
≡ 8 bu (US lvl)
= 0.281 912 561 335 04 m3 [citation needed ]
shot
≡ 1 US fl oz
≈ 29.57× 10−6 m3
strike (Imperial)
≡ 2 bu (Imp)
= 0.072 737 44 m3
strike (U.S.)
≡ 2 bu (US lvl)
= 0.070 478 140 333 76 m3
tablespoon (Canadian)
tbsp
≡ ½ fl oz (Imp)
= 14.206 531 25× 10−6 m3
tablespoon (Imperial)
tbsp
≡ 5/8 fl oz (Imp)
= 17.758 164 0625× 10−6 m3
tablespoon (metric)
≡ 15.0× 10−6 m3
tablespoon (U.S. customary)
tbsp
≡ ½ US fl oz
= 14.786 764 7825× 10−6 m3
tablespoon (U.S. food nutrition labeling)
tbsp
≡ 15 mL[ 16]
= 1.5× 10−5 m3
teaspoon (Canadian)
tsp
≡ 1/6 fl oz (Imp)
= 4.735 510 416 × 10−6 m3
teaspoon (Imperial)
tsp
≡ 1/24 gi (Imp)
= 5.919 388 02083 × 10−6 m3
teaspoon (metric)
≡ 5.0× 10−6 m3
= 5.0× 10−6 m3
teaspoon (U.S. customary)
tsp
≡ 1/6 US fl oz
= 4.928 921 595× 10−6 m3
teaspoon (U.S. food nutrition labeling)
tsp
≡ 5 mL[ 16]
= 5× 10−6 m3
timber foot
≡ 1 cu ft
= 0.028 316 846 592 m3
ton (displacement)
≡ 35 cu ft
= 0.991 089 630 72 m3
ton (freight)
≡ 40 cu ft
= 1.132 673 863 68 m3
ton (water)
≡ 28 bu (Imp)
= 1.018 324 16 m3
tun
≡ 252 gal (wine)
= 0.953 923 769 568 m3
wey (U.S.)
≡ 40 bu (US lvl)
= 1.409 562 806 6752 m3
Plane angle
Plane angle
Name of unit
Symbol
Definition
Relation to SI units
angular mil
µ
≡ 2π/6400 rad
≈ 0.981 748× 10 −3 rad
arcminute
'
≡ 1°/60
≈ 0.290 888× 10 −3 rad
arcsecond
"
≡ 1°/3600
≈ 4.848 137× 10 −6 rad
centesimal minute of arc
'
≡ 1 grad/100
≈ 0.157 080× 10 −3 rad
centesimal second of arc
"
≡ 1 grad/(10 000)
≈ 1.570 796× 10 −6 rad
degree (of arc)
°
≡ π/180 rad = 1/360 of a revolution
≈ 17.453 293× 10 −3 rad
grad ; gradian; gon
grad
≡ 2π/400 rad = 0.9°
≈ 15.707 963× 10 −3 rad
octant
≡ 45°
≈ 0.785 398 rad
quadrant
≡ 90°
≈ 1.570 796 rad
radian (SI unit)
rad
The angle subtended at the center of a circle by an arc whose length is equal to the circle's radius. One full revolution encompasses 2π radians.
= 1 rad
sextant
≡ 60°
≈ 1.047 198 rad
sign
≡ 30°
≈ 0.523 599 rad
Solid angle
Solid angle
Name of unit
Symbol
Definition
Relation to SI units
steradian (SI unit)
sr
The solid angle subtended at the center of a sphere of radius r by a portion of the surface of the sphere having an area r2 . A sphere encompasses 4π sr.[ 14]
= 1 sr
Mass
Notes:
See Weight for detail of mass/weight distinction and conversion.
In this table, the unit gee is used to denote standard gravity in order to avoid confusion with the "g" symbol for grams.
In physics , the pound of mass is sometimes written lbm to distinguish it from the pound-force (lbf ). It should not be read as the mongrel unit "pound metre".
Mass
Name of unit
Symbol
Definition
Relation to SI units
atomic mass unit, unified
u; AMU
≈ 1.660 538 73× 10−27 ± 1.3× 10−36 kg
atomic unit of mass , electron rest mass
me
≈ 9.109 382 15× 10−31 ± 45× 10−39 kg [ 18]
bag (coffee )
≡ 60 kg
= 60 kg
bag (Portland cement )
≡ 94 lb av
= 42.637 682 78 kg
barge
≡ 22½ sh tn
= 20 411.656 65 kg
carat
kt
≡ 3 1/6 gr
≈ 205.196 548 333 mg
carat (metric)
ct
≡ 200 mg
= 200 mg
clove
≡ 8 lb av
= 3.628 738 96 kg
crith
≈ 89.9349 mg
dalton
Da
≈ 1.660 902 10× 10−27 ± 1.3× 10−36 kg
dram (apothecary; troy )
dr t
≡ 60 gr
= 3.887 9346 g
dram (avoirdupois)
dr av
≡ 27 11/32 gr
= 1.771 845 195 3125 g
electronvolt
eV
≡ 1 eV (energy unit) / c2
= 1.7826× 10 −36 kg
gamma
γ
≡ 1 μg
= 1 μg
grain
gr
≡ 64.798 91 mg
= 64.798 91 mg
hundredweight (long)
long cwt or cwt
≡ 112 lb av
= 50.802 345 44 kg
hundredweight (short); cental
sh cwt
≡ 100 lb av
= 45.359 237 kg
hyl (CGS unit)
≡ 1 gee × 1 g × 1 s2 /m
= 9.806 65 g
hyl (MKS unit)
≡ 1 gee × 1 kg × 1 s2 /m
= 9.806 65 kg
kilogram , grave
kg; G
(SI base unit )[ 8]
kip
kip
≡ 1 000 lb av
= 453.592 37 kg
mark
≡ 8 oz t
= 248.827 8144 g
mite
≡ 1/20 gr
= 3.239 9455 mg
mite (metric)
≡ 1/20 g
= 50 mg
ounce (apothecary; troy)
oz t
≡ 1/12 lb t
= 31.103 4768 g
ounce (avoirdupois)
oz av
≡ 1/16 lb
= 28.349 523 125 g
ounce (U.S. food nutrition labeling)
oz
≡ 28 g[ 16]
= 28 g
pennyweight
dwt; pwt
≡ 1/20 oz t
= 1.555 173 84 g
point
≡ 1/100 ct
= 2 mg
pound (avoirdupois)
lb av
≡ 7 000 grains
= 0.453 592 37 kg
pound (metric)
≡ 500 g
= 500 g
pound (troy)
lb t
≡ 5 760 grains
= 0.373 241 7216 kg
quarter (Imperial)
≡ 1/4 long cwt = 2 st = 28 lb av
= 12.700 586 36 kg
quarter (informal)
≡ ¼ short tn
= 226.796 185 kg
quarter, long (informal)
≡ ¼ long tn
= 254.011 7272 kg
quintal (metric)
q
≡ 100 kg
= 100 kg
scruple (apothecary )
s ap
≡ 20 gr
= 1.295 9782 g
sheet
≡ 1/700 lb av
= 647.9891 mg
slug ; geepound
slug
≡ 1 gee × 1 lb av × 1 s2 /ft
≈ 14.593 903 kg
stone
st
≡ 14 lb av
= 6.350 293 18 kg
ton, assay (long)
AT
≡ 1 mg × 1 long tn ÷ 1 oz t
≈ 32.666 667 g
ton, assay (short)
AT
≡ 1 mg × 1 sh tn ÷ 1 oz t
≈ 29.166 667 g
ton, long
long tn or ton
≡ 2 240 lb
= 1 016.046 9088 kg
ton, short
sh tn
≡ 2 000 lb
= 907.184 74 kg
tonne (mts unit)
t
≡ 1 000 kg
= 1 000 kg
wey
≡ 252 lb = 18 st
= 114.305 277 24 kg (variants exist)
Zentner
Ztr.
Definitions vary; see [ 19] and.[ 14]
Density
Density
Name of unit
Symbol
Definition
Relation to SI units
gram per millilitre
g/mL
≡ g/mL
= 1000 kg/m3
kilogram per cubic metre (SI unit)
kg/m3
≡ kg/m3
= 1 kg/m3
kilogram per litre
kg/L
≡ kg/L
= 1000 kg/m3
ounce (avoirdupois) per cubic foot
oz/ft3
≡ oz/ft3
≈ 1.001153 961 kg/m3
ounce (avoirdupois) per cubic inch
oz/in3
≡ oz/in3
≈ 1.729994 044 × 103 kg/m3
ounce (avoirdupois) per gallon (Imperial)
oz/gal
≡ oz/gal
≈ 6.236023 291 kg/m3
ounce (avoirdupois) per gallon (U.S. fluid)
oz/gal
≡ oz/gal
≈ 7.489151 707 kg/m3
pound (avoirdupois) per cubic foot
lb/ft3
≡ lb/ft3
≈ 16.018463 37 kg/m3
pound (avoirdupois) per cubic inch
lb/in3
≡ lb/in3
≈ 2.767990 471 × 104 kg/m3
pound (avoirdupois) per gallon (Imperial)
lb/gal
≡ lb/gal
≈ 99.776372 66 kg/m3
pound (avoirdupois) per gallon (U.S. fluid)
lb/gal
≡ lb/gal
≈ 119.8264273 kg/m3
slug per cubic foot
slug/ft3
≡ slug/ft3
≈ 515.3788184 kg/m3
Time
Time , t
Name of unit
Symbol
Definition
Relation to SI units
atomic unit of time
au
≡ a0 /(α ·c)
≈ 2.418 884 254× 10−17 s
Callippic cycle
≡ 441 mo (hollow) + 499 mo (full) = 76 a of 365.25 d
= 2.398 3776× 10 9 s
century
≡ 100 a (see below for definition of year length)
= 100 × year
day
d
= 24 h
= 86400 s
day (sidereal)
d
≡ Time needed for the Earth to rotate once around its axis, determined from successive transits of a very distant astronomical object across an observer's meridian (International Celestial Reference Frame )
≈ 86 164.1 s
decade
≡ 10 a (see below for definition of year length)
= 10 × year
fortnight
≡ 2 wk
= 1 209 600 s
helek
≡ 1/1 080 h
= 3.3 s
Hipparchic cycle
≡ 4 Callippic cycles - 1 d
= 9.593 424× 10 9 s
hour
h
≡ 60 min
= 3 600 s
jiffy
≡ 1/60 s
= .016 s
jiffy (alternate)
≡ 1/100 s
= 10 ms
ke (quarter of an hour)
≡ ¼ h = 1/96 d
= 60 × 60 / 4 s = 900 s = 60 / 4 min = 15 min
ke (traditional)
≡ 1/100 d
= 24 × 60 × 60 / 100 s = 864 s = 24 * 60 / 100 min = 14.4 min
lustre; lustrum
≡ 5 a of 365 d
= 1.5768× 10 8 s
Metonic cycle ; enneadecaeteris
≡ 110 mo (hollow) + 125 mo (full) = 6940 d ≈ 19 a
= 5.996 16× 10 8 s
millennium
≡ 1 000 a (see below for definition of year length)
= 1000 × year
milliday
md
≡ 1/1 000 d
= 24 × 60 × 60 / 1 000 s = 86.4 s
minute
min
≡ 60 s
= 60 s
moment
≡ 90 s
= 90 s
month (full)
mo
≡ 30 d[ 20]
= 2 592 000 s
month (Greg. av.)
mo
Average Gregorian month = 365.2425/12 d = 30.436875 d
≈ 2.6297× 10 6 s
month (hollow)
mo
≡ 29 d[ 20]
= 2 505 600 s
month (synodic)
mo
Cycle time of moon phases ≈ 29.530589 days (Average)
≈ 2.551× 10 6 s
octaeteris
= 48 mo (full) + 48 mo (hollow) + 3 mo (full)[ 21] [ 22] = 8 a of 365.25 d = 2922 d
= 2.524 608× 10 8 s
Planck time
≡ (G ℏ /c 5 )½
≈ 1.351 211 868× 10−43 s
second
s
time of 9 192 631 770 periods of the radiation corresponding to the transition between the 2 hyperfine levels of the ground state of the caesium 133 atom at 0 K[ 8] (but other seconds are sometimes used in astronomy)
(SI base unit )
shake
≡ 10−8 s
= 10 ns
sigma
≡ 10−6 s
= 1 μs
Sothic cycle
≡ 1 461 a of 365 d
= 4.607 4096× 10 10 s
svedberg
S
≡ 10−13 s
= 100 fs
week
wk
≡ 7 d
= 604 800 s
year (Gregorian)
a, y, or yr
= 365.2425 d average, calculated from common years (365 d) plus leap years (366 d) on most years divisible by 4. See leap year for details.
= 31 556 952 s
year (Julian)
a, y, or yr
= 365.25 d average, calculated from common years (365 d) plus one leap year (366 d) every four years
= 31 557 600 s
year (sidereal)
a, y, or yr
≡ time taken for Sun to return to the same position with respect to the stars of the celestial sphere
≈ 365.256 363 d ≈ 31 558 149.7632 s
year (tropical)
a, y, or yr
≡ Length of time it takes for the Sun to return to the same position in the cycle of seasons
≈ 365.242 190 d ≈ 31 556 925 s
Where UTC is observed, the length of time units longer than 1 s may increase or decrease by 1 s if a leap second occurs during the time interval of interest.
Frequency
Frequency
Name of unit
Symbol
Definition
Relation to SI units
hertz (SI unit)
Hz
≡ Number of cycles per second
= 1 Hz = 1/s
revolutions per minute
rpm
≡ One unit rpm equals one rotation completed around a fixed axis in one minute of time.
≈ 0.104719 755 rad/s
Speed or velocity
Speed
Name of unit
Symbol
Definition
Relation to SI units
foot per hour
fph
≡ 1 ft/h
≈ 8.466 667× 10−5 m/s
foot per minute
fpm
≡ 1 ft/min
= 5.08× 10−3 m/s
foot per second
fps
≡ 1 ft/s
= 3.048× 10−1 m/s
furlong per fortnight
≡ furlong/fortnight
≈ 1.663 095× 10−4 m/s
inch per minute
ipm
≡ 1 in/min
≈ 4.23 333× 10−4 m/s
inch per second
ips
≡ 1 in/s
= 2.54× 10−2 m/s
kilometre per hour
km/h
≡ 1 km/h
≈ 2.777 778× 10−1 m/s
knot
kn
≡ 1 NM /h = 1.852 km/h
≈ 0.514 444 m/s
knot (Admiralty)
kn
≡ 1 NM (Adm)/h = 1.853 184 km/h [citation needed ]
= 0.514 773 m/s
mach number
M
The ratio of the speed of an object moving through a fluid to the speed of sound in the same medium; typically used as a measure of aircraft speed.
Unitless. Actual speed of sound varies depending on atmospheric conditions. See "speed of sound" below for one specific condition.
metre per second (SI unit)
m/s
≡ 1 m/s
= 1 m/s
mile per hour
mph
≡ 1 mi/h
= 0.447 04 m/s
mile per minute
mpm
≡ 1 mi/min
= 26.8224 m/s
mile per second
mps
≡ 1 mi/s
= 1 609.344 m/s
speed of light in vacuum
c
≡ 299 792 458 m/s
= 299 792 458 m/s
speed of sound in air
s
≈ 344 m/s at 20 °C, 60% relative humidity [ 23]
A velocity consists of a speed combined with a direction; the speed part of the velocity takes units of speed.
Flow (volume)
Flow
Name of unit
Symbol
Definition
Relation to SI units
cubic foot per minute
CFM
≡ 1 ft3 /min
= 4.719474 432 × 10−4 m3 /s
cubic foot per second
ft3 /s
≡ 1 ft3 /s
= 0.028316 846 592 m3 /s
cubic inch per minute
in3 /min
≡ 1 in3 /min
= 2.731177 3 × 10 −7 m3 /s
cubic inch per second
in3 /s
≡ 1 in3 /s
= 1.6387064 × 10−5 m3 /s
cubic metre per second (SI unit)
m3 /s
≡ 1 m3 /s
= 1 m3 /s
gallon (U.S. fluid) per day
GPD
≡ 1 gal/d
= 4.381263 63 8 × 10 −8 m3 /s
gallon (U.S. fluid) per hour
GPH
≡ 1 gal/h
= 1.051503 27 3 × 10 −6 m3 /s
gallon (U.S. fluid) per minute
GPM
≡ 1 gal/min
= 6.309019 64 × 10−5 m3 /s
litre per minute
LPM
≡ 1 L/min
= 1.6 × 10 −5 m3 /s
Acceleration
Force
Force
Name of unit
Symbol
Definition
Relation to SI units
atomic unit of force
≡ me ·α 2 ·c 2 /a0
≈ 8.238 722 06× 10−8 N [ 24]
dyne (cgs unit )
dyn
≡ g·cm/s2
= 10−5 N
kilogram-force ; kilopond; grave -force
kgf; kp; Gf
≡ g × 1 kg
= 9.806 65 N
kip ; kip-force
kip; kipf; klbf
≡ g × 1 000 lb
= 4.448 221 615 2605× 10 3 N
milligrave -force, gravet-force
mGf; gf
≡ g × 1 g
= 9.806 65 mN
newton (SI unit)
N
A force capable of giving a mass of one kg an acceleration of one meter per second, per second.[ 25]
= 1 N = 1 kg·m/s2
ounce-force
ozf
≡ g × 1 oz
= 0.278 013 850 953 7812 N
pound
lb
≡ slug·ft/s2
= 4.448 230 531 N
pound-force
lbf
≡ g × 1 lb
= 4.448 221 615 2605 N
poundal
pdl
≡ 1 lb·ft/s2
= 0.138 254 954 376 N
sthene (mts unit)
sn
≡ 1 t·m/s2
= 1× 10 3 N
ton -force
tnf
≡ g × 1 sh tn
= 8.896 443 230 521× 10 3 N
See also: Conversion between weight (force) and mass
Pressure or mechanical stress
Pressure
Name of unit
Symbol
Definition
Relation to SI units
atmosphere (standard)
atm
≡ 101 325 Pa [ 26]
atmosphere (technical)
at
≡ 1 kgf/cm2
= 9.806 65× 10 4 Pa [ 26]
bar
bar
≡ 105 Pa
barye (cgs unit )
≡ 1 dyn/cm2
= 0.1 Pa
centimetre of mercury
cmHg
≡ 13 595.1 kg/m3 × 1 cm × g
≈ 1.333 22× 10 3 Pa [ 26]
centimetre of water (4 °C)
cmH2 O
≈ 999.972 kg/m3 × 1 cm × g
≈ 98.0638 Pa [ 26]
foot of mercury (conventional)
ftHg
≡ 13 595.1 kg/m3 × 1 ft × g
≈ 40.636 66× 10 3 Pa [ 26]
foot of water (39.2 °F)
ftH2 O
≈ 999.972 kg/m3 × 1 ft × g
≈ 2.988 98× 10 3 Pa [ 26]
inch of mercury (conventional)
inHg
≡ 13 595.1 kg/m3 × 1 in × g
≈ 3.386 389× 10 3 Pa [ 26]
inch of water (39.2 °F)
inH2 O
≈ 999.972 kg/m3 × 1 in × g
≈ 249.082 Pa [ 26]
kilogram-force per square millimetre
kgf/mm2
≡ 1 kgf/mm2
= 9.806 65× 10 6 Pa [ 26]
kip per square inch
ksi
≡ 1 kipf/sq in
≈ 6.894 757× 10 6 Pa [ 26]
micron (micrometre) of mercury
μ
{\displaystyle \mu }
mHg
≡ 13 595.1 kg/m3 × 1
μ
{\displaystyle \mu }
m × g ≈ 0.001 torr
≈ 0.133 3224 Pa [ 26]
millimetre of mercury
mmHg
≡ 13 595.1 kg/m3 × 1 mm × g ≈ 1 torr
≈ 133.3224 Pa [ 26]
millimetre of water (3.98 °C)
mmH2 O
≈ 999.972 kg/m3 × 1 mm × g = 0.999 972 kgf/m2
= 9.806 38 Pa
pascal (SI unit)
Pa
≡ N/m2 = kg/(m·s2 )
= 1 Pa [ 27]
pièze (mts unit)
pz
≡ 1 000 kg/m·s2
= 1× 10 3 Pa = 1 kPa
pound per square foot
psf
≡ 1 lbf/ft2
≈ 47.880 25 Pa [ 26]
pound per square inch
psi
≡ 1 lbf/in2
≈ 6.894 757× 10 3 Pa [ 26]
poundal per square foot
pdl/sq ft
≡ 1 pdl/sq ft
≈ 1.488 164 Pa [ 26]
short ton per square foot
≡ 1 sh tn × g / 1 sq ft
≈ 95.760 518× 10 3 Pa
torr
torr
≡ 101 325/760 Pa
≈ 133.3224 Pa [ 26]
Torque or moment of force
Torque
Name of unit
Symbol
Definition
Relation to SI units
foot-pound force
ft lbf
≡ g × 1 lb × 1 ft
= 1.355 817 948 331 4004 N·m
foot -poundal
ft pdl
≡ 1 lb·ft2 /s2
= 4.214 011 009 380 48× 10−2 N·m
inch-pound force
in lbf
≡ g × 1 lb × 1 in
= 0.112 984 829 027 6167 N·m
metre kilogram
m kg
≡ N × m / g
≈ 0.101 971 621 N·m
Newton metre (SI unit)
N·m
≡ N × m = kg·m2 /s2
= 1 N·m
Energy, work, or amount of heat
Energy
Name of unit
Symbol
Definition
Relation to SI units
barrel of oil equivalent
bboe
≈ 5.8× 10 6 BTU59 °F
≈ 6.12× 10 9 J
British thermal unit (ISO)
BTUISO
≡ 1.0545× 10 3 J
= 1.0545× 10 3 J
British thermal unit (International Table)
BTUIT
= 1.055 055 852 62× 10 3 J
British thermal unit (mean)
BTUmean
≈ 1.055 87× 10 3 J
British thermal unit (thermochemical)
BTUth
≈ 1.054 350× 10 3 J
British thermal unit (39 °F)
BTU39 °F
≈ 1.059 67× 10 3 J
British thermal unit (59 °F)
BTU59 °F
≡ 1.054 804× 10 3 J
= 1.054 804× 10 3 J
British thermal unit (60 °F)
BTU60 °F
≈ 1.054 68× 10 3 J
British thermal unit (63 °F)
BTU63 °F
≈ 1.0546× 10 3 J
calorie (International Table)
calIT
≡ 4.1868 J
= 4.1868 J
calorie (mean)
calmean
≈ 4.190 02 J
calorie (thermochemical)
calth
≡ 4.184 J
= 4.184 J
calorie (3.98 °C)
cal3.98 °C
≈ 4.2045 J
calorie (15 °C)
cal15 °C
≡ 4.1855 J
= 4.1855 J
calorie (20 °C)
cal20 °C
≈ 4.1819 J
Celsius heat unit (International Table)
CHUIT
≡ 1 BTUIT × 1 K/°R
= 1.899 100 534 716× 10 3 J
cubic centimetre of atmosphere ; standard cubic centimetre
cc atm; scc
≡ 1 atm × 1 cm3
= 0.101 325 J
cubic foot of atmosphere; standard cubic foot
cu ft atm; scf
≡ 1 atm × 1 ft3
= 2.869 204 480 9344× 10 3 J
cubic foot of natural gas
≡ 1 000 BTUIT
= 1.055 055 852 62× 10 6 J
cubic yard of atmosphere; standard cubic yard
cu yd atm; scy
≡ 1 atm × 1 yd3
= 77.468 520 985 2288× 10 3 J
electronvolt
eV
≡ e × 1 V
≈ 1.602 177 33× 10−19 ± 4.9× 10 −26 J
erg (cgs unit )
erg
≡ 1 g·cm2 /s2
= 10−7 J
foot-pound force
ft lbf
≡ g × 1 lb × 1 ft
= 1.355 817 948 331 4004 J
foot-poundal
ft pdl
≡ 1 lb·ft2 /s2
= 4.214 011 009 380 48× 10−2 J
gallon -atmosphere (imperial)
imp gal atm
≡ 1 atm × 1 gal (imp)
= 460.632 569 25 J
gallon-atmosphere (US)
US gal atm
≡ 1 atm × 1 gal (US)
= 383.556 849 0138 J
hartree , atomic unit of energy
Eh
≡ me ·α 2 ·c 2 (= 2 Ry)
≈ 4.359 744× 10−18 J
horsepower -hour
hp·h
≡ 1 hp × 1 h
= 2.684 519 537 696 172 792× 10 6 J
inch-pound force
in lbf
≡ g × 1 lb × 1 in
= 0.112 984 829 027 6167 J
joule (SI unit)
J
The work done when a force of one newton moves the point of its application a distance of one meter in the direction of the force.[ 25]
= 1 J = 1 m·N = 1 kg·m2 /s2
kilocalorie; large calorie
kcal; Cal
≡ 1 000 calIT
= 4.1868× 10 3 J
kilowatt-hour ; Board of Trade Unit
kW·h; B.O.T.U.
≡ 1 kW × 1 h
= 3.6× 10 6 J
litre -atmosphere
l atm; sl
≡ 1 atm × 1 L
= 101.325 J
quad
≡ 1015 BTUIT
= 1.055 055 852 62× 10 18 J
rydberg
Ry
≡ R∞ ·ℎ ·c
≈ 2.179 872× 10−18 J
therm (E.C.)
≡ 100 000 BTUIT
= 105.505 585 262× 10 6 J
therm (U.S.)
≡ 100 000 BTU59 °F
= 105.4804× 10 6 J
thermie
th
≡ 1 McalIT
= 4.1868× 10 6 J
ton of coal equivalent
TCE
≡ 7 Gcalth
= 29.3076× 10 9 J
ton of oil equivalent
TOE
≡ 10 Gcalth
= 41.868× 10 9 J
ton of TNT
tTNT
≡ 1 Gcalth
= 4.184× 10 9 J
Power or heat flow rate
Power
Name of unit
Symbol
Definition
Relation to SI units
atmosphere -cubic centimetre per minute
atm ccm
≡ 1 atm × 1 cm3 /min
= 1.688 75× 10−3 W
atmosphere-cubic centimetre per second
atm ccs
≡ 1 atm × 1 cm3 /s
= 0.101 325 W
atmosphere-cubic foot per hour
atm cfh
≡ 1 atm × 1 cu ft/h
= 0.797 001 244 704 W
atmosphere-cubic foot per minute
atm·cfm
≡ 1 atm × 1 cu ft/min
= 47.820 074 682 24 W
atmosphere-cubic foot per second
atm cfs
≡ 1 atm × 1 cu ft/s
= 2.869 204 480 9344× 10 3 W
BTU (International Table) per hour
BTUIT /h
≡ 1 BTUIT /h
≈ 0.293 071 W
BTU (International Table) per minute
BTUIT /min
≡ 1 BTUIT /min
≈ 17.584 264 W
BTU (International Table) per second
BTUIT /s
≡ 1 BTUIT /s
= 1.055 055 852 62× 10 3 W
calorie (International Table) per second
calIT /s
≡ 1 calIT /s
= 4.1868 W
foot-pound-force per hour
ft lbf/h
≡ 1 ft lbf/h
≈ 3.766 161× 10−4 W
foot-pound-force per minute
ft lbf/min
≡ 1 ft lbf/min
= 2.259 696 580 552 334× 10−2 W
foot-pound-force per second
ft lbf/s
≡ 1 ft lbf/s
= 1.355 817 948 331 4004 W
horsepower (boiler)
bhp
≈ 34.5 lb/h × 970.3 BTUIT /lb
≈ 9.810 657× 10 3 W
horsepower (European electrical)
hp
≡ 75 kp·m/s
= 736 W
horsepower (Imperial electrical)
hp
≡ 746 W
= 746 W
horsepower (Imperial mechanical)
hp
≡ 550 ft lbf/s
= 745.699 871 582 270 22 W
horsepower (metric)
hp
≡ 75 m kgf/s
= 735.498 75 W
litre -atmosphere per minute
L·atm/min
≡ 1 atm × 1 L/min
= 1.688 75 W
litre-atmosphere per second
L·atm/s
≡ 1 atm × 1 L/s
= 101.325 W
lusec
lusec
≡ 1 L·µmHg/s [ 14]
≈ 1.333× 10−4 W
poncelet
p
≡ 100 m kgf/s
= 980.665 W
square foot equivalent direct radiation
sq ft EDR
≡ 240 BTUIT /h
≈ 70.337 057 W
ton of air conditioning
≡ 1 t ice melted / 24 h
≈ 3 504 W
ton of refrigeration (Imperial)
≡ 1 BTUIT × 1 lng tn/lb ÷ 10 min/s
≈ 3.938 875× 10 3 W
ton of refrigeration (IT)
≡ 1 BTUIT × 1 sh tn/lb ÷ 10 min/s
≈ 3.516 853× 10 3 W
watt (SI unit)
W
The power which in one second of time gives rise to one joule of energy.[ 25]
= 1 W = 1 J/s = 1 N·m/s = 1 kg·m2 /s3
Action
Dynamic viscosity
Dynamic viscosity
Name of unit
Symbol
Definition
Relation to SI units
pascal second (SI unit)
Pa·s
≡ N·s/m2 , kg/(m·s)
= 1 Pa·s
poise (cgs unit )
P
≡ 10−1 Pa·s
= 0.1 Pa·s
pound per foot hour
lb/(ft·h)
≡ 1 lb/(ft·h)
≈ 4.133 789× 10 −4 Pa·s
pound per foot second
lb/(ft·s)
≡ 1 lb/(ft·s)
≈ 1.488164 Pa·s
pound-force second per square foot
lbf·s/ft2
≡ 1 lbf·s/ft2
≈ 47.88026 Pa·s
pound-force second per square inch
lbf·s/in2
≡ 1 lbf·s/in2
≈ 6894 .757 Pa·s
Kinematic viscosity
Kinematic viscosity
Name of unit
Symbol
Definition
Relation to SI units
square foot per second
ft2 /s
≡ 1 ft2 /s
= 0.092903 04 m2 /s
square metre per second (SI unit)
m2 /s
≡ 1 m2 /s
= 1 m2 /s
stokes (cgs unit )
St
≡ 10−4 m2 /s
= 10−4 m2 /s
Electric current
Electric current
Name of unit
Symbol
Definition
Relation to SI units
ampere (SI base unit )
A
≡ The constant current needed to produce a force of 2 × 10 −7 newton per metre between two straight parallel conductors of infinite length and negligible circular cross-section placed one metre apart in a vacuum.[ 8]
= 1 A
electromagnetic unit ; abampere (cgs unit )
abamp
≡ 10 A
= 10 A
esu per second ; statampere (cgs unit )
esu/s
≡ (0.1 A·m/s) / c
≈ 3.335641 × 10−10 A
Electric charge
Electric dipole
Electric dipole
Name of unit
Symbol
Definition
Relation to SI units
atomic unit of electric dipole moment
ea 0
≈ 8.478 352 81× 10 −30 C·m[ 29]
Electromotive force, electric potential difference
Voltage , electromotive force
Name of unit
Symbol
Definition
Relation to SI units
abvolt (cgs unit )
abV
≡ 1× 10 −8 V
= 1× 10 −8 V
statvolt (cgs unit )
statV
≡ c · (1 μJ/A·m)
= 299.792 458 V
volt (SI unit)
V
The difference in electric potential across two points along a conducting wire carrying one ampere of constant current when the power dissipated between the points equals one watt.[ 25]
= 1 V = 1 W/A = 1 kg·m2 /(A·s3 )
Electrical resistance
Electrical resistance
Name of unit
Symbol
Definition
Relation to SI units
ohm (SI unit)
Ω
The resistance between two points in a conductor when one volt of electric potential difference, applied to these points, produces one ampere of current in the conductor.[ 25]
= 1 Ω = 1 V/A = 1 kg·m2 /(A2 ·s3 )
Capacitance
Capacitor 's ability to store charge
Name of unit
Symbol
Definition
Relation to SI units
farad (SI unit)
F
The capacitance between two parallel plates that results in one volt of potential difference when charged by one coulomb of electricity.[ 25]
= 1 F = 1 C/V = 1 A2 ·s4 /(kg·m2 )
Magnetic flux
magnetic flux
Name of unit
Symbol
Definition
Relation to SI units
maxwell (CGS unit)
Mx
≡ 10−8 Wb[ 30]
= 1× 10 −8 Wb
weber (SI unit)
Wb
Magnetic flux which, linking a circuit of one turn, would produce in it an electromotive force of 1 volt if it were reduced to zero at a uniform rate in 1 second.[ 25]
= 1 Wb = 1 V·s = 1 kg·m2 /(A·s2 )
Magnetic flux density
What physicists call Magnetic field is called Magnetic flux density by electrical engineers and magnetic induction by applied mathematicians and electrical engineers.
Name of unit
Symbol
Definition
Relation to SI units
gauss (CGS unit)
G
≡ Mx /cm2 = 10−4 T
= 1× 10 −4 T [ 31]
tesla (SI unit)
T
≡ Wb /m2
= 1 T = 1 Wb/m2 = 1 kg/(A·s2 )
Inductance
Inductance
Name of unit
Symbol
Definition
Relation to SI units
henry (SI unit)
H
The inductance of a closed circuit that produces one volt of electromotive force when the current in the circuit varies at a uniform rate of one ampere per second.[ 25]
= 1 H = 1 Wb/A = 1 kg·m2 /(A·s)2
Temperature
Temperature
Name of unit
Symbol
Definition
Conversion to kelvin
degree Celsius
°C
°C = K − 273.15. A unit of °C is the same size as a unit of K; however, their numerical values differ as the zero point of Celsius is set at 273.15 K (the ice point).[ 8]
[K] = [°C] + 273.15
degree Delisle
°De
[K] = 373.15 − [°De] × 2/3
degree Fahrenheit
°F
0 °F ≡ freezing pt. of H2 O+NaCl, 180°F between freezing and boiling pt of H2 O @ 1atm
[K] = ([°F] + 459.67) × 5/9
degree Newton
°N
[K] = [°N] × 100/33 + 273.15
degree Rankine
°R; °Ra
0 °R ≡ absolute zero
[K] = [°R] × 5/9
degree Réaumur
°Ré
[K] = [°Ré] × 5/4 + 273.15
degree Rømer
°Rø
[K] = ([°Rø] − 7.5) × 40/21 + 273.15
kelvin (SI base unit)
K
≡ 1/273.16 of the thermodynamic temperature of the triple point of water .[ 8]
1 K
Information entropy
Name of unit
Symbol
Definition
Relation to SI units
Relation to bits
SI unit
J/K
≡ J/K
= 1 J/K
nat ; nip; nepit
nat
≡ kB
= 1.380 650 5(23)× 10 −23 J/K
bit ; shannon
bit; b; Sh
≡ ln(2) × kB
= 9.569 940 (16)× 10 −24 J/K
= 1 bit
ban ; hartley
ban; Hart
≡ ln(10) × kB
= 3.179 065 3(53)× 10 −23 J/K
nibble
≡ 4 bits
= 3.827 976 0(64)× 10 −23 J/K
= 22 bit
byte
B
≡ 8 bits
= 7.655 952 (13)× 10 −23 J/K
= 23 bit
kilobyte (decimal)
kB
≡ 1 000 B
= 7.655 952 (13)× 10 −20 J/K
kilobyte (kibibyte )
KB; KiB
≡ 1 024 B
= 7.839 695 (13)× 10 −20 J/K
= 210 bit
Often, information entropy is measured in shannons , whereas the (discrete) storage space of digital devices is measured in bits. Thus, uncompressed redundant data occupy more than one bit of storage per shannon of information entropy. The multiples of a bit listed above are usually used with this meaning. Other times the bit is used as a measure of information entropy and is thus a synonym of shannon.
Luminous intensity
The candela is the preferred nomenclature for the SI unit.
Luminous intensity
Name of unit
Symbol
Definition
Relation to SI units
candela (SI base unit); candle
cd
The luminous intensity, in a given direction, of a source that emits monochromatic radiation of frequency 540× 10 12 hertz and that has a radiant intensity in that direction of 1/683 watt per steradian.[ 8]
= 1 cd
candlepower (new)
cp
≡ cd The use of candlepower as a unit is discouraged due to its ambiguity.
= 1 cd
candlepower (old, pre-1948)
cp
Varies and is poorly reproducible.[ 32] Approximately 0.981 cd.[ 14]
≈ 0.981 cd
Luminance
Luminance
Name of unit
Symbol
Definition
Relation to SI units
candela per square foot
cd/ft2
≡ cd/ft2
≈ 10.763910 417 cd/m2
candela per square inch
cd/in2
≡ cd/in2
≈ 1550 .0031 cd/m2
candela per square metre (SI unit); nit (deprecated[ 14] )
cd/m2
≡ cd/m2
= 1 cd/m2
footlambert
fL
≡ (1/π) cd/ft2
≈ 3.426259 0996 cd/m2
lambert
L
≡ (104 /π) cd/m2
≈ 3183 .0988618 cd/m2
stilb (CGS unit)
sb
≡ 104 cd/m2
≈ 1× 10 4 cd/m2
Luminous flux
Luminous flux
Name of unit
Symbol
Definition
Relation to SI units
lumen (SI unit)
lm
≡ cd·sr
= 1 lm = 1 cd·sr
Illuminance
Illuminance
Name of unit
Symbol
Definition
Relation to SI units
footcandle ; lumen per square foot
fc
≡ lm/ft2
= 10.763910 417 lx
lumen per square inch
lm/in2
≡ lm/in2
≈ 1550 .0031 lx
lux (SI unit)
lx
≡ lm/m2
= 1 lx = 1 lm/m2
phot (CGS unit)
ph
≡ lm/cm2
= 1× 10 4 lx
Radiation - source activity
Radioactivity
Name of unit
Symbol
Definition
Relation to SI units
becquerel (SI unit)
Bq
≡ Number of disintegrations per second
= 1 Bq = 1/s
curie
Ci
≡ 3.7× 10 10 Bq
= 3.7× 10 10 Bq [ 33]
rutherford (H)
rd
≡ 1 MBq
= 1× 10 6 Bq
Please note that although becquerel (Bq) and hertz (Hz) both ultimately refer to the same SI base unit (s−1 ), Hz is used only for periodic phenomena, and Bq is only used for stochastic processes associated with radioactivity.[ 34]
Radiation - exposure
Radiation - exposure
Name of unit
Symbol
Definition
Relation to SI units
roentgen
R
1 R ≡ 2.58× 10 −4 C/kg[ 30]
= 2.58× 10 −4 C/kg
The roentgen is not a SI unit and the NIST strongly discourages its continued use.[ 35]
Radiation - absorbed dose
Radiation - absorbed dose
Name of unit
Symbol
Definition
Relation to SI units
gray (SI unit)
Gy
≡ 1 J/kg = 1 m2 /s2 [ 36]
= 1 Gy
rad
rad
≡ 0.01 Gy[ 30]
= 0.01 Gy
Radiation - equivalent dose
Although the definitions for sievert (Sv) and gray (Gy) would seem to indicate that they measure the same quantities, this is not the case. The effect of receiving a certain dose of radiation (given as Gy) is variable and depends on many factors, thus a new unit was needed to denote the biological effectiveness of that dose on the body; this is known as the equivalent dose and is shown in Sv. The general relationship between absorbed dose and equivalent dose can be represented as
H = Q · D
where H is the equivalent dose, D is the absorbed dose, and Q is a dimensionless quality factor. Thus, for any quantity of D measured in Gy, the numerical value for H measured in Sv may be different.[ 37]
Home and office computers come with converters in bundled spreadsheet applications or can access free converters via the Internet. Units and measurements can be easily converted using these tools, but only if the units are explicitly defined and the conversion is compatible (e.g., cmHg to kPa).
Free conversion software
General commercial sources of converters
See also
Template:Multicol
Template:Multicol-break
Template:Multicol-end
References
^ United States Naval Observatory . (2009). Selected Astronomical Constants, 2009 . Accessed May 10, 2009
^ "NIST Reference on Constants, Units, and Uncertainty." (2006). National Institute of Standards and Technology . Retrieved February 22, 2008.
^ a b c d e f g h i j k l m n o Lide, D. (Ed.). (1990). Handbook of Chemistry and Physics (71st ed). Boca Raton, FL: CRC Press. Section 1.
^ a b National Bureau of Standards. (June 30, 1959). Refinement of values for the yard and the pound . Federal Register, viewed September 20, 2006 at National Geodetic Survey web site .
^ National Institute of Standards and Technology General Tables of Units of Measurement
^ The International Astronomical Union and Astronomical Units
^
Klein, Herbert Arthur.
(1988). The Science of Measurement: a Historical Survey . Mineola, NY: Dover Publications 0-4862-5839-4 .
^ a b c d e f g The International System of Units, Section 2.1 (8 ed.), Bureau International des Poids et Mesures , 2006, retrieved August 26, 2009
^ International System of Units, 8th ed. (2006), Bureau International des Poids et Mesures , Section 4.1 Table 8.
^ P. Kenneth Seidelmann, Ed. (1992). Explanatory Supplement to the Astronomical Almanac. Sausalito, CA: University Science Books. p. 716 and s.v. parsec in Glossary.
^ a b c Whitelaw, Ian. (2007). A Measure of All Things: The Story of Man and Measurement . New York: Macmillan 0-312-37026-1 . p. 152.
^ a b De Vinne, Theodore Low (1900). The practice of typography: a treatise on the processes of type-making, the point system, the names, sizes, styles and prices of plain printing types 2nd ed. New York: The Century Co. p. 142–150.
^ Pasko, Wesley Washington (1894). American dictionary of printing and bookmaking . (1894). New York: Howard Lockwood. p. 521.
^ a b c d e f Rowlett, Russ (2005), How Many? A Dictionary of Units of Measurement
^ Thompson, A. and Taylor, B.N. (2008). Guide for the Use of the International System of Units (SI) . National Institute of Standards and Technology Special Publication 811. p. 57.
^ a b c d e U.S. Code of Federal Regulations, Title 21, Section 101.9, Paragraph (b)(5)(viii) , retrieved August 29, 2009
^ Barry N. Taylor, Ed.,NIST Special Publication 330: The International System of Units (SI) (2001 Edition), Washington: U.S. Government Printing Office, 43,"The 12th Conference Generale des Poids et Mesures (CGPM)…declares that the word “litre” may be employed as a special name for the cubic decimetre".
^ CODATA Value: atomic uint of mass. (2006). National Institute of Standards and Technology . Retrieved 16 September 2008.
^ The Swiss Federal Office for Metrology gives Zentner on a German language web page [1] and quintal on the English translation of that page [2] ; the unit is marked "spécifiquement suisse !"
^ a b Pedersen O. (1983). "Glossary" in Coyne, G. , Hoskin, M., and Pedersen, O. Gregorian Reform of the Calendar: Proceedings of the Vatican Conference to Commemorate its 400th Anniversary . Vatican Observatory. Available from Astrophysics Data System .
^ Richards, E.G. (1998). Mapping Time . Oxford University Press. pp. 94–95. ISBN 0-19-850413-6 .
^ Steel, Duncan (2000). Marking Time . John Wiley & Sons. p. 46. ISBN 0-471-29827-1 .
^ Lide, 1990, p. 14-35.
^ CODATA Value: atomic unit of force . (2006). National Institute of Standards and Technology . Retrieved September 14, 2008.
^ a b c d e f g h i [[Comité International des Poids et Mesures]], Resolution 2 , 1946, retrieved August 26, 2009
^ a b c d e f g h i j k l m n o p Barry N. Taylor, (April 1995), Guide for the Use of the International System of Units (SI) (NIST Special Publication 811), Washington, DC: U.S. Government Printing Office, pp. 57–68.
^ Barry N. Taylor, (April 1995), Guide for the Use of the International System of Units (SI) (NIST Special Publication 811), Washington, DC: U.S. Government Printing Office, p. 5.
^ International System of Units, 8th ed. (2006), Bureau International des Poids et Mesures , Section 4.1 Table 7.
^ The NIST Reference on Constants, Units, and Uncertainty , 2006, retrieved August 26, 2009
^ a b c NIST Guide to SI Units, Appendix B.9 , retrieved August 27, 2009
^ Standard for the Use of the International System of Units (SI): The Modern Metric System IEEE/ASTM SI 10-1997. (1997). New York and West Conshohocken, PA: Institute of Electrical and Electronics Engineers and American Society for Testing and Materials . Tables A.1 through A.5.
^ The NIST Reference on Constants, Units, and Uncertainty , retrieved August 28, 2009
^ Ambler Thompson & Barry N. Taylor. (2008). Guide for the Use of the International System of Units (SI) . Special Publication 811. Gaithersburg, MD: National Institute of Standards and Technology . p. 10.
^ a b The International System of Units, Section 2.2.2., Table 3 (8 ed.), Bureau International des Poids et Mesures , 2006, retrieved August 27, 2009
^ The NIST Guide to the SI (Special Publication 811), section 5.2 , 2008, retrieved August 27, 2009
^ Ambler Thompson & Barry N. Taylor. (2008). Guide for the Use of the International System of Units (SI) . (Special Publication 811. Gaithersburg, MD: National Institute of Standards and Technology . p. 5.
^ [[Comité international des poids et mesures]], 2002, Recommendation 2 , retrieved August 27, 2009
External links
Current
Background
Historic
Metric Europe Asia Africa North America South America
Ancient List articles Other