Scania K series

Scania K series
Scania K series
	Australia Wide Coaches, Sydney Coach Design-bodied Scania K480EB
Overview
Manufacturer	Scania
Also called	K EB, K IA, K IB, K UA, K UB, K UD
Production	2006–present
Assembly	Sweden: Södertälje; Brazil: São Bernardo do Campo; Indonesia: Jakarta;
Body and chassis
Class	Bus and coach chassis
Body style	Single-decker bus; Single-decker coach; Single-decker articulated bus; Double-decker bus
Doors	1, 2, 3 or 4 (1-1-0; 1-2-0; 1-1-1; 1-2-1; 1-1-1-0)
Floor type	Low floor (K UD); Low entry (K UB and K UA); Step deck (K EB, K IA and K IB)
Powertrain
Engine	Scania DC9/DC12/DT12; Scania DC09/DC13; Scania OC9/OC09 (CNG);
Power output	230–500 ps
Transmission	Voith DIWA; ZF Ecomat; ZF EcoLife; Scania Comfort Shift; Scania Opticruise
Dimensions
Length	9.4m to 18.1m
Width	2.5m
Height	3.0m to 4.4m
Chronology
Predecessor	Scania 4 series;

The Scania K series is a series of chassis in Scania's city bus and coach range with longitudinally, straight-up mounted engine at the rear, replacing the K- (K94, K114, K124) and L-type (L94) chassis of the 4 series. The K series was first presented on Busworld 2005^[1] in Kortrijk, Belgium, and models were available from 2006.

Type designation breakdown

Plant at which the vehicle was assembled (integral buses only)

C: former Kapena plant, Slupsk, Poland (K UB, K UA)
L: Lahden Autokori plant, Lahti, Finland – Interlink and OmniExpress (K UB, K IB, K EB)
T: Higer plant, China – A30 and A808 Touring coaches (K EB chassis only)

Engine location

K: chassis with centrally mounted longitudinal engine behind rearmost axle

Power code

Approximation of the power rating in hp to the nearest ten. The power code has spaces on both sides.

Type of transport

E: coach, long distance, high comfort
I: intercity, short to long distance, normal comfort
U: urban, short distance, normal comfort

Chassis adaption

A: articulated bus
B: normal bus
D: double-decker bus

Wheel configuration

4x2: two-axle bus
6x2: tri-axle bus
6x2/2: tri-axle articulated bus
6x2*4: tri-axle bus with steered tag axle
8x2: quad-axle bus (K IB in Latin America only)
8x2/2: quad-axle articulated bus (K IA only)

Chassis height

L: low front, normal rear
M: low front and middle, normal rear (K UA only)
N: normal front and rear

Suspension

B: air suspension front and rear, rigid front axle
I: air suspension front and rear, independent front suspension

K230UB4x2LB would be a two-axle "low entry" city bus, while K480EB6x2*4NI would be a tri-axle long-distance coach with a steerable tag axle.

Note: One might think that double-decker coaches are designated as (e.g.) K 440 ED6x2*4NI. But they still use K EB for some reason.

Engines

When introduced, the K series was available with Euro IV-compliant 8.9-litre (8867 cc) 5-cylinder engines (DC9) with output of 230 hp (1050 Nm), 270 hp (1250 Nm) and 310 hp (1550 Nm) as well as the 11.7-litre (11705 cc) 6-cylinder engines (DC12) with output of 340 hp (1700 Nm), 380 hp (1900 Nm), 420 hp (2100 Nm) or 470 hp (2200 Nm), the latter being a DT12 turbo-compound engine. For the 5- and 6-cylinder engines Scania is using exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) systems to fulfill the legal Euro emission standards.

In 2008 Scania released upgraded Euro V engines in order to meet these regulations. The 5-cylinder DC9 (later DC09) engines featured a larger bore and displace 9.3-litres (9291 cc) instead of 8.9-litres. The new DC13 engines feature both a larger bore and a longer stroke and therefore displace 12.7-litres (12742 cc) instead of 11.7-litres. Some engines also received slight performance improvements, for example the DC9 engine that outputs 310 hp (1550 Nm) was upgraded to 320 hp (1600 Nm).

With the introduction of Euro VI engines in 2013, the DC09 outputs 250 hp (1250 Nm), 280 hp (1400 Nm), 320 hp (1600 Nm) and 360 hp (1700 Nm), while the DC13 outputs 410 hp (2150 Nm), 450 hp (2350 Nm) and 490 hp (2550 Nm).^[2] Euro III, IV and V engines are still available for export markets.

For alternative fuels, the 9.3-litre was available as the OC9 CNG engine with power outputs of 270 hp (1100 Nm) and 305 hp (1250 Nm), which from the introduction of Euro VI was replaced by the OC09 with power outputs of 280 hp (1350 Nm) and 340 hp (1600 Nm). The 8.9-litre is available as the ethanol fueled DC9 E02 with a power output of 270 hp (1200 Nm).

Scania K EB

The K280EB, K310EB, K320EB, K340EB, K360EB, K380EB, K400EB, K410EB, K420EB, K440EB, K450EB, K470EB, K480EB, K490EB and K500EB chassis have independent front suspension and are used for top end coaches. (4x2, 6x2 and 6x2*4).

Scania K IA

Scania K320IA (left) and Scania K340IA (right) operated for TransJakarta

The K310IA is an articulated intercity bus chassis available in Latin America as 6x2/2 and 8x2/2.

One K340IA 6x2/2 and 107 K320IA 6x2/2 are operated for TransJakarta, with the K340IA unit and 51 K320IA units self-operated by TransJakarta management and 56 K320IA units owned and operated by PT. Mayasari Bakti. All units uses OC09 CNG engines that fulfill Euro VI emission standard.

Scania K IB

The K250IB, K270IB, K280IB, K310IB, K320IB, K340IB, K360IB, K380IB, K400IB, K410IB, and K420IB are the intercity bus variants but are also used for coaches. Available as 4x2, 6x2, 6x2*4 and 8x2.

A Nan-Jye bodied K400IB4X2NB bus operated by Ho-Hsin Bus in Taiwan
Greyhound Australia Mills-Tui bodied K380IB
A Sin-Sheng bodied K400IB4X2NB bus operated by Capital Bus in Taipei, Taiwan
Laksana Cityline2 bodied K310IB 6x2*4 operated by PT Mayasari Bakti for TransJakarta BRT
Scania K320IB/Higer A30 TV7681
Laksana Cityline3 bodied Scania K250IB for TransJakarta BRT

Scania K UA

The K270UA, K280UA, K305UA (CNG), K310UA, K320UA, and K360UA are the articulated (6x2/2) city bus variant which can be ordered with the two stronger 9-litre diesel engine variants or the strongest 9-litre CNG engine variant.

Sydney Buses currently has one K310UA (Fleet No. 2111) in service on Metrobus Route 10, plying between Maroubra Junction and Leichhardt via CBD.

In Adelaide (as of the 5th July 2020 contracts), Torrens Transit currently have 96 K320UA units (831–850, 1101–1119, 1121–1166, 1170–1181), plus 19 K360UAs (803, 805–808, 851–853, 857, 1182–1189, 1849–1850).^[3] In addition, Torrens Transit has one K310UA unit (1015) which was used as an initial trial bus on the O-Bahn.^[3] SouthLink currently has 10 K360UA units (3370–3379).^[4] Busways has 3 K360UAs (2859-2860, 2864).^[5]

Scania K UB

The K230UB, K250UB, K270UB, K280UB, K305UB (CNG), K310UB, K320UB, and K360UB are the rigid (4x2 or 6x2*4) city bus variant which can be ordered with all 9-litre engines. A pair of K380UB 6x2*4 with the 11.7-litre engine has also been made for a customer in Norway.

Australia

Numerous bus operators in Australia operate the Scania K-series chassis.

In Melbourne, CDC Melbourne, Transdev Melbourne and Ventura Bus Lines all operate fleets of K230UBs. In Geelong, CDC Geelong operates a number of K230UBs and McHarry's Buslines also operate a number of K270UBs, K270IBs, K280UBs, K280IBs, K320IBs and one K310IB.

In New South Wales, Busways and ComfortDelGro Australia's Hillsbus and Hunter Valley Buses subsidiaries have significant numbers of K230UB, K280UB and K310UB in their fleet.^[6] Transdev NSW also operates a fleet of K230UB^[7] while State Transit operate K280UB & K310UB.^[8]

In Canberra, ACTION operates over 150 K320UBs, including 26 Euro V K320UB 6x2*4 buses.^[9]

In Adelaide, Light-City Buses has 112 K230UB units, of which 98 are used on the O-Bahn Busway. Greater-northern and greater-southern, and hills operator SouthLink have 34 K230UB units + 13 KUB units for use in the Adelaide Hills.

Hong Kong

In 2008, Kowloon Motor Bus purchased 30 Scania K230UBs with Euro IV engines and Salvador Caetano body, 20 of which were 10.6m and the remainder were 12m in length. All were delivered in 2009.

The twenty 10.6m versions of K230UBs have been registered between April and June 2009 and known as the ASB class. After undergoing tests, the first few units were finally introduced on route 2C plying between Yau Yat Tsuen and Tsim Sha Tsui on Sunday, 24 May 2009. Some other buses have also been introduced on suburban routes, such as route 7M & 24.

The ten 12m versions of K230UBs have also been registered between June and August 2009 and known as the ASC class.

A further 20 K230UBs of 12m length were ordered afterwards, with one being a Euro V EEV demonstrator of the ASCU class.

HZMB bus operator has ordered 100 K250UBs with Higer body and delivered in 2018.

Indonesia

In 2016, the Jakarta Provincial Government placed orders for 150 Scania K250UB Euro III to replace aging Kopaja and MetroMini fleet.^[10] In advantage of the older buses, the Scania K250UB is wheelchair accessible and fitted with air conditioner. It is also expected to reduce air pollution since it fulfills Euro III emission standard. The buses are operated by TransJakarta as MetroTrans, and operated outside the BRT system. Operation started by 2017.^[11]

In 2020, Suroboyo Bus purchased eight Scania K250UB Euro III buses bodied with Cityline 3 by Laksana. These units are equipped with bike racks in the front of the bus.^[12]

Malaysia

Rapid Bus, a Prasarana Malaysia subsidiary company, currently operates one of the largest fleets of Scania K-series buses, with a total of 830 single-deck K250UB and K270UBs with three different service brands.

Rapid Penang

In 2009, 200 Scania K270UB Euro III units were delivered to Rapid Penang. An additional order for 120 Scania K250UB Euro III units was placed in 2012, all with a total length of 10.7m.

Rapid KL

In 2011, Rapid KL placed an order for 150 Scania K270UB Euro III units. The bodywork and interior of these buses bear a close resemblance to the Euro V units SBS Transit has introduced earlier. Rapid KL placed a follow-up order for 300 units of K250UB Euro III vehicles in 2015.

Rapid Kuantan

Ten units Scania K250UB Euro III have gone into operation in December 2012. A total of 60 units has been purchased. The buses have restyled front and rear as well as a newly developed driver's place.

New Zealand

In New Zealand, several operators have Scania K-series UB urban buses. Because of the additional weight of the 9-litre engine compared to the 7-litre units offered by other manufacturers, many (though not all) Scania urban buses are specified as 6x2 rather than 4x2. This helps reduce the operator's liability for road user charges, which are calculated by vehicle weight. Scania K-series urban buses may have tag axles at lengths where buses of other makes would not, e.g. NZ Bus's 2100 and 2200 series at approximately 12.0 m and only 42 seats.

Scania K-series urban buses pioneered steerable tag axles in New Zealand, which became a requirement for buses between 12.6 m and 13.5 m in length. Because Scania K-series buses had a longer rear overhang than competing makes, the allowable overhang with a steerable tag axle was increased from 4.25 m to 4.5 m. The Scania K280 UB 6x2*4 and K320 UB 6x2*4 have been popular chassis for operators building high-capacity single-deck buses. New Zealand's first double-deck bus in regular urban service was a Gemilang-bodied Scania K310 UD 6x2*4.

Singapore

SBS Transit

Euro IV

Euro V

Scania K230UB operating under SBS Transit in Singapore

SBS Transit currently operates the largest fleet of Scania K-series buses in Singapore, with a total of 1,101 Scania K230UBs.

The company made its first purchase of 500 K230UBs^[13] at a cost of S$180 million in early 2007, as part of its scheme to replace most of the ageing fleet and compliance with the new Euro IV emission standards set by local authorities.^[14] The single-decker buses are wheelchair accessible and have 2 wheelchair bays each. They are also fitted with 6-speed ZF automatic transmission, bodied by Gemilang Coachwork of Johor, Malaysia with a modified Scania licensed front.

In September 2008, SBS Transit purchased another 400 K230UBs at the cost of S$147 million, with similar features to the first batch of 500. However, these buses had Euro V EEV engine as standard, one wheelchair bay each in favour of extra seating.

SBS Transit made the last order for 200 more K230UBs in August 2009 at a cost of S$72 million.

These Scania K230UBs are the only SBS Transit Bus that ply Service 160 and 170 which is a cross-border service between Singapore and Johor Barhu, Malaysia. Other buses that are SG Plated or not in SBS Transit Livery are not allowed to ply Services into Malaysia.

Early Withdrawal

SBS8900B was caught in an accident at Bedok North Bus Depot while on Service 48 in December 2011 and was deregistered and scrapped in April 2013.

SBS8360J was caught in an accident at Jalan Jurong Kechil with a MAN NL323F A22 (SMB1636U) while on Service 157 on 11 May 2018 and was deregistered and parked at Traffic Police Compound. In September 2020, it was reported the bus had been moved to Ulu Pandan Bus Depot. It is unknown whether the bus will be repaired.

Other operators

Singapore Ducktours has 9 Scania K230UBs (3 under 2007, 4 under 2010 and 2 under 2011), configured as open top double-decker buses with bodywork by Soon Chow Corporation for its Hippotours service.

Singapore Changi Airport contracted Woodlands Transport Service Pte Ltd to operate 3 Gemilang-bodied Scania K230UB for its internal shuttle services (Budget Terminal >> Terminal 2). Upon withdrawal of the shuttle services (due to the closure of Budget Terminal), these buses were repainted into SATS gateway livery and are used inside the Airport runway. In addition, a specially configured Scania K230UB (registered as SKP8296X) is used as an "ambulance bus".

Resorts World Sentosa operates a handful of KUBs to provide shuttle services for its hotel guests. These buses were bodied by SC Auto in a coach configuration.

ComfortDelGro Bus also operates a handful of SC Auto-bodied K230UBs for its National University of Singapore internal shuttle service.

Taiwan

Two units of Scania K230UB have been in operation by Ho-Hsin Bus (zh) in Tainan City since 2014, with bodywork by Gemilang Coachworks.

Scania K UD

The K280UD, K310UD and K320UD is the double-decker city bus variant with an 8.9-litre DC9-18 5-cylinder 310 hp Euro IV compliant engine (hence the 310 in K310UD), or a 9.3-litre DC9-29 5-cylinder 280 hp Euro V compliant engine. The 'U' indicates the bus is designed for the urban application, the 'D' points out the chassis is made for a double-decker.