BMW N63
BMW N63/S63 | |
---|---|
S63 variant of N63 | |
Overview | |
Manufacturer | BMW |
Production | 2008-present |
Layout | |
Configuration | turbo DOHC 90° V8 |
Chronology | |
Predecessor | BMW N62 |
Successor | - |
The BMW N63 is a twin-turbo DOHC V8 engine which has been in production since 2008 to present. The N63 is the world's first production car engine to use a "hot-vee" layout, with the turbochargers located inside the "V" of the engine. The N63 is also BMW's first V8 engine to use direct injection. The engine was first used in the 2008 BMW X6 xDrive50i.[1]
The N63 replaced the naturally aspirated N62. Due to the presence of turbocharging, the N63 does not use a variable-length intake manifold, and initial versions of the N63 do not have variable valve lift (Valvetronic).
In December 2014, BMW North America released a voluntary recall ("Customer Care Package") relating to issues with timing chain stretch, fuel injectors, mass air flow sensors, crankcase vent lines, battery, engine vacuum pump, low pressure fuel sensor and revising the oil service interval.[2]
The S63 engine is the high-performance version (M version) of this engine.
Alpina versions of the N63 are used in various F01 7 Series, F10 5 Series, G11 7 Series and G30 5 Series models.
Design
The airflow path through the engine uses a "hot-vee" layout, where the exhaust manifolds and turbochargers are located between the cylinder banks (on the "inside" of the V8) and the intake manifolds are located on the outside of the engine.[3] This is opposite to the traditional layout for a V8, where the intake is inside the "V" and the exhaust manifold is on the outside. The hot-vee layout reduces the width of the engine and decreases the exhaust runner length from the exhaust valves to the turbochargers. The engine uses air-to-water intercoolers, therefore improving throttle response.[1][4]
Similar to the N54B30, initial N63 variants (including the S63) do not use variable valve lift (Valvetronic), because its benefit of reducing of intake vacuum is not as important in turbocharged engines.[5]
The N63/S63 uses a bore of 89 mm (3.5 in) and a stroke of 88.3 mm (3.5 in) (except for the Chinese market 4.0 litre variant).
2012 technical update
In 2012, a "Technical Update" was applied to the N63, resulting in the N63TU variants (also known as N63B44O1). The main upgrade was the addition of Valvetronic.[6][7] Other changes include revised turbochargers, removal of the blowoff valve, lighter pistons, forged connecting rods and crankshaft, addition of an oil catch can system, revised fuel system and addition of a second coolant pump.[5]
2016 technical update
A second Technical Update occurred in 2016, resulting in the N63TU2 variants (also known as N63B44O2). The major changes are the use of twin-scroll turbochargers, a wider powerband and the oil/coolant heat exchanger being moved to within the "V" of the engine.[8]
2018 technical update
A third Technical Update was introduced in 2018. Two variants are offered: N63B44M3[9] and N63B44T3[10]. N63B44M3 features the turbochargers relocated inside the "V" of the engine, improved thermal shielding for the crankcase and the cylinder head, and a new ignition system. In addition, N63B44T3 uses higher pressure (5000psi) injectors, larger twin-scroll turbochargers, a redesigned intake manifold, and an upstream cooling radiator.
Models
Engine | Displacement | Power | Torque | Years |
---|---|---|---|---|
N63B40A | 3,982 cc (243 cu in) | 300 kW (408 PS; 402 bhp) @ 5500 rpm |
600 N⋅m (443 lb⋅ft) @ 1750-4500 rpm |
2012-2015 |
330 kW (449 PS; 443 bhp) @ 5500 rpm |
650 N⋅m (479 lb⋅ft) @ 1750-4500 rpm | |||
N63B44O0 | 4,395 cc (268 cu in) | 300 kW (408 PS; 402 bhp) @ 5500-6400 rpm |
600 N⋅m (443 lb⋅ft) @ 1750-4500 rpm |
2008-2013 |
N63B44O1 | 331 kW (450 PS; 444 bhp) @ 5500-6000 rpm |
650 N⋅m (479 lb⋅ft) @ 2000-4500 rpm |
2013-2016 | |
N63B44O2 | 331 kW (450 PS; 444 bhp) @ 5500-6000 rpm |
650 N⋅m (480 lb⋅ft) @ 1800-4500 rpm |
2016-present | |
N63B44M3 | 340 kW (462 PS; 456 bhp) @ 5250-6000 rpm |
650 N⋅m (480 lb⋅ft) @ 1500-4750 rpm |
2018-present | |
N63B44T3 | 390 kW (530 PS; 523 bhp) @ 5500-6000 rpm |
750 N⋅m (550 lb⋅ft) @ 1800-4600 rpm |
2018-present | |
S63B44O0 | 408 kW (555 PS; 547 bhp) @ 6000 rpm |
680 N⋅m (502 lb⋅ft) @ 1500-5650 rpm |
2010-2013 | |
S63B44T0 | 412 kW (560 PS; 553 bhp) @ 6000-7000 rpm |
680 N⋅m (500 lb⋅ft) @ 1500-5750 rpm |
2011-present | |
S63B44T2 | 423 kW (575 PS; 567 bhp) @ 6000-6500 rpm |
750 N⋅m (550 lb⋅ft) @ 2200-5000 rpm |
2015-present | |
S63B44T4 | 441 kW (600 PS; 591 bhp) @ 5600-6700 rpm |
750 N⋅m (550 lb⋅ft) @ 1800-5600 rpm |
2018-present |
N63B40A
This smaller variant was sold in the Chinese market. Due to a shorter stroke length of 80 mm (3.1 in), the capacity is reduced to 3,982 cc (243.0 cu in).[11]
Applications:
- 2012-2017 F12/F13 650i (China only, 300 kW version)
- 2012-2017 F01/F02 750i/750Li (China only, 330 kW version)
N63B44O0
The initial version of the N63 produces 300 kW (402 bhp) and 600 N⋅m (443 lb⋅ft).
Applications:
- 2008– 2013 E71 X6
- 2009– 2012 F01/F02 750i/750Li[12]
- 2010– 2012 F07 550i GT
- 2011– 2013 F10/F11 550i
- 2011– 2013 E70 X5
- 2012– 2012 F12/F13 650i
- 2011–2014 Wiesmann GT MF4
N63B44O1 (N63TU)
The first technical update resulted in an increase of 30 kW (40 bhp) and 50 N⋅m (37 lb⋅ft).
Applications:
- 2013–2015 F01/F02 750i/750Li
- 2013–2016 F07 550i GT
- 2014–2016 F10/F11 550i
- 2014–2018 F15 X5
- 2014–2019 F16 X6
- 2013–2018 F12/F13 650i
- 2013–2019 F06 650i
N63B44O2 (N63TU2)
The second technical update resulted in peak torque being produced over a 200 rpm wider band.
Applications:
- 2016– G12 750i/750Li sDrive/xDrive
- 2017– G30 M550i xDrive
N63B44M3 (N63TU3)
Applications:
- 2018–2019 G05 X5 xDrive50i
N63B44T3 (N63TU3)
Applications:
- 2018– G15 M850i xDrive
- 2019– G05 X5 M50i
- 2019– G30 M550i xDrive
S63
The S63 is BMW's Motorsport division version of the N63, which debuted in the BMW X6 M. The S63 uses two twin-scroll turbochargers plus a pulse tuned, cross-engine exhaust manifold[3] to keep constant exhaust pulses flowing to the turbos at every 180 degree rotation.
S63B44O0
Applications:
- 2010–2013 E70 X5 M
- 2010–2013 E71 X6 M
- 2011–2014 Wiesman GT MF5[13]
S63B44T0
A technical update to the S63, known as the S63B44T0, debuted on the F10 M5 sedan. This version uses Valvetronic,[14] a 10:1 compression ratio (compared with 9.3:1 for the non-TU version) and 1.5 bar of boost (compared with 1.3).[15] It is the first BMW M engine to use Valvetronic. The rev limit was increased from 6800 rpm to 7200 rpm.[16]
Applications:
S63B44T2
The S63B44T2 debuted on the 2015 X5 M and X6 M models.[17]
Applications:
S63B44T4
The S63B44T4 debuted on the 2018 M5.[18]
Applications:
Alpina
Alpina uses a variant of the N63 engine, which was hand-assembled at the Alpina plant in Buchloe before being transported to the BMW production line.[19]
For the 2013 model year, the Alpina engine received Valvetronic like all other N63 engines.[20]
Engine | Power | Torque | CR | Year |
---|---|---|---|---|
M1 | 373 kW (500 bhp) @ 5500 rpm |
700 N⋅m (516 lb⋅ft) @ 3000-4750 rpm |
9.2:1 | 2009-2012 |
M1/1 | 397 kW (532 bhp) @ 5200-6250 rpm |
730 N⋅m (538 lb⋅ft) @ 2800-5000 rpm |
9.2:1 | 2012-2014 |
M2, M2/1 | 397 kW (532 bhp) @ 5200-6250 rpm |
730 N⋅m (538 lb⋅ft) @ 2800-5000 rpm |
10.0:1 | 2012-2015 |
M2/2 | 441 kW (591 bhp) @ 6000 rpm |
800 N⋅m (590 lb⋅ft) @ 3500-4500 rpm |
10.0:1 | 2015- |
? (N63M30) |
447 kW (599 bhp) @ 5750-6250 rpm |
800 N⋅m (590 lb⋅ft) @ 3000-5000 rpm |
10.0:1 | 2016- |
M1
Applications:
- 2009–2012 Alpina B7 Bi-Turbo: based on the BMW F01 7 Series[21][22]
- 2010–2011 Alpina B5 Bi-Turbo Sedan/Touring: based on the BMW F10/F11 5 Series
M1/1
Applications:
- 2012–2014 Alpina B5 Bi-Turbo Sedan/Touring: based on the BMW F10/F11 5 Series[23]
M1/2
Applications:
- 2011–2015 Alpina B6 Bi-Turbo Coupé/Cabrio: based on the BMW F12/F13 6 Series[23]
M2, M2/1
Applications:
- 2014–2015 Alpina B6 Bi-Turbo Gran Coupé: based on the BMW F06 6 Series[24]
- 2012–2015 Alpina B7 Bi-Turbo: based on the BMW F01 7 Series[24][25]
M2/2
Applications:
- 2015 Alpina B5 Bi-Turbo Edition 50 Sedan/Touring: based on the BMW F10/F11 5 Series[26]
- 2015–2016 Alpina B6 Bi-Turbo Edition 50 Coupé/Cabrio: based on the BMW F12/F13 6 Series[26]
- 2016 Alpina B5 Bi-Turbo: based on the BMW F10/F11 5 Series
- 2016–present Alpina B6 Bi-Turbo: based on the BMW F06/F12/F13 6 Series[26]
N63M30
The Alpina engine code is still unknown but the engine is codenamed N63M30 by BMW.
Applications:
- 2016–present Alpina B7 Bi-Turbo: based on the BMW G12 7 Series[27]
- 2017–present Alpina B5 Bi-Turbo: based on the BMW G30/G31 5 Series[28]
References
- ^ a b BMW X6 Full Details, Specifications and Photos
- ^ "BMW offers Customer Care Package for N63 engines". www.bmwblog.com. Archived from the original on 6 January 2015.
- ^ a b BimmerBoost - BMW twin turbo V8 analysis - Power potential, tuning, performance, and architecture of the N63 and S63 motors
- ^ "Interview: BMW M Head of Engine Development Details F10 M5 S63Tu Engine". www.m5post.com. Retrieved 19 July 2017.
- ^ a b "BMW N63 Turbocharged V8 Engines". www.unixnerd.demon.co.uk. Retrieved 8 July 2017.
- ^ "BMW TwinPower Turbo and Valvetronic". www.bmwblog.com. Retrieved 8 July 2017.
- ^ "BMW updates all N63 V8 Turbo cars to the 445 horsepower N63TU motor for 2013". www.bimmerboost.com. Retrieved 8 July 2017.
- ^ "N63TU2 Engine Technical Training". BMW Service. Retrieved 10 July 2017.
- ^ "The all-new BMW X5". BMW Group. Retrieved 6 June 2018.
- ^ "The all-new BMW 8 Series Coupe". www.press.bmwgroup.com. Retrieved 2018-06-15.
- ^ "2014 650i technical data". www.bmw.com.cn (in Chinese). Retrieved 8 July 2017.
- ^ New BMW 7-Series (F01) Specifications and Photos
- ^ "Car and Driver - BMW M5 powered Wiesmann GT MF5 on road and track". www.youtube.com. Retrieved 13 July 2017.
- ^ "FAQ F10 M5". www.bmwmregistry.com. Retrieved 13 July 2017.
- ^ New BMW M5 S63Tu Engine Improves Upon X5/X6M's S63 - All Details
- ^ "BMW S63 V8 Turbocharged M-Tech Engines". www.unixnerd.demon.co.uk. Retrieved 19 July 2017.
- ^ "BMW X5 M price, photos and specs". www.caranddriver.com. Retrieved 13 July 2017.
- ^ "New BMW M5 revealed". www.carmagazine.co.uk. Retrieved 24 September 2017.
- ^ "2011 BMW 750Li Alpina B7 First Drive". www.edmunds.com. Archived from the original on 10 February 2015.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ "Archived copy". Archived from the original on 2013-01-29. Retrieved 2012-10-07.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help)CS1 maint: archived copy as title (link) - ^ Noah Joseph RSS feed. "Geneva 2009: An M7 by any other name - 2009 BMW Alpina B7 Bi-Turbo". Autoblog.com. Retrieved 2012-06-05.
- ^ "2011 BMW Alpina B7 First Drive". Motor Trend. 2010-05-19. Archived from the original on 2015-02-25. Retrieved 2012-06-05.
{{cite web}}
: Unknown parameter|dead-url=
ignored (|url-status=
suggested) (help) - ^ a b Burgan, Richard (27 March 2015). "Alpina B5 Bi-Turbo et B6 Bi-Turbo Edition 50 : 100 unités, 600 chevaux" (in French). Retrieved 29 June 2015.
- ^ a b Quiroga, Tony (May 2014). "2015 BMW Alpina B6 xDrive Gran Coupe - First Drive Review". Car & Driver. Retrieved 29 June 2015.
- ^ Vaughn, Mark (7 July 2014). "To The Max". Autoweek. 64 (14): 22–23.
- ^ a b c Ramey, Jay (6 April 2015). "Celebrate Alpina's 50th at 204 mph". Autoweek. Retrieved 29 June 2015.
- ^ "Road Vehicle Descriptor (RVD1)". rvcs-prodweb.dot.gov.au. Retrieved 2016-11-24.
- ^ "Road Vehicle Descriptor (RVD1)". rvcs-prodweb.dot.gov.au. Retrieved 2018-06-08.