Jump to content

Barton Highway

Route map:
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by InternetArchiveBot (talk | contribs) at 20:56, 27 October 2016 (Rescuing 2 sources and tagging 0 as dead. #IABot (v1.2.6)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Barton Highway

New South Wales
–Australian Capital Territory
General information
TypeHighway
Length52 km (32 mi)
Route number(s)
  • A25
Former
route number
  • National Highway 25
Major junctions
North end Hume Highway,
Yass, New South Wales
 for full list see major intersections
South end Federal Highway, Canberra, Australian Capital Territory
Location(s)
Major settlementsMurrumbateman
Highway system

The Barton Highway[1] is a short highway in New South Wales and the Australian Capital Territory, Australia.

The Barton Highway connects Canberra to the Hume Highway at Yass, and it is part of the route from Melbourne to Canberra and is named in honour of Sir Edmund Barton, the first Prime Minister of Australia.

Intersection of the Federal Highway, Barton Highway and Northbourne Avenue.
Intersection of the Federal Highway, Barton Highway and Northbourne Avenue.

Route and history

Proclaimed a state highway in 1935, it was officially named as the Barton Highway in August 1954, signposted as National Route 25 two years later, fully sealed by 1960, and granted national highway status in 1974. The original purpose of the Yass-Canberra Road was to connect surrounding towns with the newly established national capital. Prior to the highway's establishment a series of trunk routes connected farming locations in the Yass Valley.[2]

Heading east from Yass, the Barton Highway originally commenced at a junction on the Hume Highway, near the historic Cooma Cottage, and east of the Yass River.[3] Requiring traffic to make a right–hand turn across a single lane of the Hume Highway, the highway commenced at this point and tracked generally south by southeast, through undulating hills to the village of Murrumbateman and entering the Australian Capital Territory (ACT), going through the village and main street of Hall, and meeting the Federal Highway at Lyneham at a junction near Sullivans Creek on Mouat Street, adjacent to Lyneham High School and to the south of the Highway's current alignment.[3]

The first realignment occurred during the late 1970s, when the southern terminus of the highway was relocated north, to the north of the Yowani Country Club.[3] In 1980 the village of Hall was bypassed; and during the early 1990s a dual carriageway was completed on the ACT section of the highway, between Hall and Kaleen. A further section of dual carriageways was completed in December 2002, between Gungahlin Drive and the southern terminus with the Federal Highway.[2]

Between April 1993 and May 1995, as part of the Hume Highway bypass of Yass, a 9-kilometre (5.6 mi) dual carriageway deviation of Barton Highway was constructed to connect the Barton Highway with the new route of the Hume Highway, north of Yass. The new route crosses the Yass River on twin bridges to the east of Cooma Cottage before terminating at the Hume Highway about 3 kilometres (1.9 mi) northeast of Yass.[3]

The Gundaroo Drive/Barton Highway round-about is surrounded by a number of trees to the south of the intersection. The pine tree plantation was originally planted in the shape of a map of Australia

Murrumbateman bypass and staged duplication

The Barton Highway passes through farmlands and the NSW town of Murrumbateman. In October 2001 the Australian Government announced that they would bypass to the town to the east. A$20 million was set aside in the 2006 federal budget for planning and duplication costs associated with the bypass.[4] The same year, the National Roads and Motorists' Association had named the Barton Highway as the worst highway on the AusLink National Network in New South Wales; accounting for three road fatalities annually.[5][6] While 42 kilometres (26 mi) of the 52-kilometre (32 mi) highway are located in New South Wales (NSW), only 6 kilometres (3.7 mi) of the NSW section are dual carriageway.[2]

Various NSW[7] and Federal[8] governments have committed funding towards improvements to the Barton Highway, including a bypass east of Murrumbateman and a staged duplication to create 33 kilometres (21 mi) of dual carriageways.[9] Construction work has not commenced.[10]

Major intersections

StateLGA / DistrictLocationkm[11]miDestinationsNotes
New South WalesYass ValleyYass00.0 Hume Highway (M31) – Gundagai, Melbourne, Goulburn, SydneyNorthern highway terminus; trumpet interchange
4.62.9Yass Valley Way – YassDumbbell interchange
Murrumbateman18.311.4Murrumbateman Road – Gundaroo, Bungendore
Wallaroo40.124.9New South Wales–Australian Capital Territory border
Australian Capital TerritoryHallHall
GungahlinKinlyside–Nicholls boundary43.427.0 Kuringa Drive (Tourist Drive 4) south-west / Clarrie Hermes Drive north-east – Fraser, Belconnen, NgunnawalTourist Drive 4 northern concurrency terminus
Gungahlin–Belconnen boundaryNicholls–Crace–Giralang tripoint46.128.6William Slim Drive west / Gundaroo Drive east – Belconnen, Gungahlin, GundarooRoundabout
Crace–Mitchell–Kaleen tripoint49.830.9Gunghalin Drive – Mitchell, Belconnen, WodenParclo interchange
North CanberraLyneham–Downer border52.032.3 Federal Highway (A23) north-east / Northbourne Avenue (A23 / Tourist Drive 4) south – Goulburn, City Centre, Queanbeyan, CoomaSouthern highway terminus; Tourist Drive 4 continues south
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. ^ National Route 25, Ozroads: the Australian Roads Website. Retrieved on 11 May 2008.[self-published source]
  2. ^ a b c "Barton Highway". OzRoads. Retrieved 20 March 2015.[self-published source]
  3. ^ a b c d "Barton Highay: Former alignments". OzRoads. Retrieved 20 March 2015.[self-published source]
  4. ^ "Labor commits $20m to improving Barton Highway". ABC News. Australia. 21 November 2007. Retrieved 20 March 2015.
  5. ^ Hodgkinson, Katrina (17 June 2008). "Barton Highway Funding". Hansard. Parliament of New South Wales. Archived from the original on 2 April 2015. Retrieved 20 March 2015. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  6. ^ Hodgkinson, Katrina (15 May 2008). "Murrumbateman Bypass". Hansard. Parliament of New South Wales. Archived from the original on 2 April 2015. Retrieved 20 March 2015. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  7. ^ "Barton Highway duplication: Preferred road corridor boundaries report" (PDF). Manidis Roberts Pty Ltd (PDF). Roads & Maritime Services, Government of New South Wales. November 2011. ISBN 978-1-922040-05-3. Retrieved 20 March 2015.
  8. ^ Albanese, Anthony (22 October 2012). "Barton Highway: Federal Labor delivers more safety upgrades" (Press release). Australian Government. {{cite press release}}: |access-date= requires |url= (help)
  9. ^ Taylor, Angus (3 September 2014). "Barton Highway duplication plan". Yass Tribune. Retrieved 20 March 2015.
  10. ^ "Barton Highway: Future duplication". Projects: South West NSW. Roads & Maritime Services, Government of New South Wales. Retrieved 20 March 2015.
  11. ^ "Barton Highway" (Map). Google Maps. Retrieved 8 April 2014.
Wikimedia Commons has media related to Barton Highway.
KML file (edit • help)
Template:Attached KML/Barton Highway
KML is from Wikidata
Retrieved from "https://en.wikipedia.org/w/index.php?title=Barton_Highway&oldid=746508038"