Jump to content

Lutetium(III) oxide

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 24.3.8.179 (talk) at 19:38, 14 May 2014 (add link). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Lutetium(III) oxide
Names
Other names
Lutetium oxide, Lutetium sesquioxide
Identifiers
ECHA InfoCard 100.031.591 Edit this at Wikidata
Properties
Lu2O3
Molar mass 397.932 g/mol
Melting point 2490 °C
Boiling point 3980 °C
Solubility in other solvents moderate
Band gap 5.5 eV[1]
Structure
N/A
N/A<
Related compounds
Other anions
Lutetium(III) chloride
Other cations
Ytterbium(III) oxide
Supplementary data page
Lutetium(III) oxide (data page)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Lutetium(III) oxide, a white solid, is a cubic compound of lutetium sometimes used in the preparation of specialty glasses. It is also called lutecia. It is a lanthanide oxide, also known as a rare earth.[2]

History

In 1879, Jean-Charles-Galissard de Margnac (1817–1894), a French chemist, claimed to have discovered ytterbium, but actually he had found a mixture of elements. In 1907, a French chemist Georges Urbain (1872–1938) reported that ytterbium was a mixture of two new elements and not a single element. Two more chemists came to the same conclusion. They were from Germany, Karl Auer (1858–1929) and America, Charles James (1880–1926). The two compounds they discovered were neoytterbium and lutecium. However, none of these chemists actually dealt with pure lutetium. The compound they found was usually lutetium oxide.[3]

Uses

The product of Lu2O3 and palladium(II) oxide (PdO) (formed at high pressure and temperature in the presence of potassium chlorate) has a potential use in superconducting materials.[4] Lutetium(III) oxide is an important raw material for laser crystals. It also has specialized uses in ceramics, glass, phosphors, and lasers. Lutetium(III) oxide is used as a catalyst in cracking, alkylation, hydrogenation, and polymerization.[2] The band gap of lutetium oxide is 5.5 eV. [5]

References

  1. ^ "Optical and dielectric characteristics of the rare-earth metal oxide Lu2O3," S. V. Ordin and A. I. Shelykh, Semiconductors, Vol. 44, Num. 5 (2010), pp. 558-563, DOI: 10.1134/S1063782610050027
  2. ^ a b Lutetium Oxide. 1997-2007. Metall Rare Earth Limited.<http://www.metall.com.cn/luo.htm?gclid=CKrqtNDdyIsCFR0CPwodEkZnHw>
  3. ^ Lutetium. 2005-2006. Bookrags.<http://www.bookrags.com/research/lutetium/>
  4. ^ Lutetium (III) oxide. 2007. Sigma Aldrich.<http://www.sigmaaldrich.com/catalog/search/ProductDetail/ALDRICH/289191>
  5. ^ "Optical and dielectric characteristics of the rare-earth metal oxide Lu2O3," S. V. Ordin and A. I. Shelykh, Semiconductors Volume 44, Number 5 (2010), 558-563, DOI: 10.1134/S1063782610050027
  • Macintyre, J.E. (1992). Dictionary of Inorganic Compounds volumes 1-3. London, UK: Chapman & Hall.
  • Trotman-Dickenson, A.F. (1973). Comprehensive Inorganic Chemistry. Oxford, UK: Pergamon.