IEEE 802.16

IEEE 802.16

Working Group on Broadband Wireless Access Standards

IEEE 802.16 is a series of Wireless Broadband standards authored by the Institute of Electrical and Electronics Engineers (IEEE). The IEEE Standards Board in established a working group in 1999 to develop standards for broadband Wireless Metropolitan Area Networks. The Workgroup is a unit of the IEEE 802 local area network and metropolitan area network standards committee.

Although the 802.16 family of standards is officially called WirelessMAN in IEEE, it has been commercialized under the name “WiMAX” (from "Worldwide Interoperability for Microwave Access") by the WiMAX Forum industry alliance. The Forum promotes and certifies compatibility and interoperability of products based on the IEEE 802.16 standards.

The 802.16e-2005 amendment version was announced as being deployed around the world in 2009. The version IEEE 802.16-2009 was amended by IEEE 802.16j-2009.

Standards

Projects publish draft and proposed standards with the letter "P" prepended, which gets dropped and replaced by a dash and year when the standards are ratified and published.

Projects

Standard	Description	Status
802.16-2001	Fixed Broadband Wireless Access (10–63 GHz)	Superseded
802.16.2-2001	Recommended practice for coexistence	Superseded
802.16c-2002	System profiles for 10–63 GHz	Superseded
802.16a-2003	Physical layer and MAC definitions for 2–11 GHz	Superseded
P802.16b	License-exempt frequencies (Project withdrawn)	Withdrawn
P802.16d	Maintenance and System profiles for 2–11 GHz (Project merged into 802.16-2004)	Merged
802.16-2004	Air Interface for Fixed Broadband Wireless Access System (rollup of 802.16-2001, 802.16a, 802.16c and P802.16d)	Superseded
P802.16.2a	Coexistence with 2–11 GHz and 23.5–43.5 GHz (Project merged into 802.16.2-2004)	Merged
802.16.2-2004	Recommended practice for coexistence (Maintenance and rollup of 802.16.2-2001 and P802.16.2a)	Current
802.16f-2005	Management Information Base (MIB) for 802.16-2004	Superseded
802.16-2004/Cor 1-2005	Corrections for fixed operations (co-published with 802.16e-2005)	Superseded
802.16e-2005	Mobile Broadband Wireless Access System	Superseded
802.16k-2007	Bridging of 802.16 (an amendment to IEEE 802.1D)	Current
802.16g-2007	Management Plane Procedures and Services	Superseded
P802.16i	Mobile Management Information Base (Project merged into 802.16-2009)	Merged
802.16-2009	Air Interface for Fixed and Mobile Broadband Wireless Access System (rollup of 802.16-2004, 802.16-2004/Cor 1, 802.16e, 802.16f, 802.16g and P802.16i)	Current
802.16j-2009	Multihop relay	Current
802.16h-2010	Improved Coexistence Mechanisms for License-Exempt Operation	Current
802.16m-2011	Advanced Air Interface with data rates of 100 Mbit/s mobile and 1 Gbit/s fixed. Also known as Mobile WiMAX Release 2 or WirelessMAN-Advanced. Aiming at fulfilling the ITU-R IMT-Advanced requirements on 4G systems.	Current
P802.16n	Higher Reliability Networks	In Progress
P802.16p	Enhancements to Support Machine-to-Machine Applications	In Progress

Working group history

IEEE 802.16 standardizes the air interface and related functions associated with wireless local loop. The charter originally envisioned that three working groups would each produce a stand alone standard referred to as 802.16.1, 802.16.2 and 802.16.3. During development a decision was made that the first and third tasks were significantly related; the result was that two standards and an amendment were released.

• IEEE 802.16 (formerly 802.16.1) - Air interface for 10 to 66 GHz, also known as Local Multipoint Distribution Service. It was approved in December 2001. It delivered a standard for point to multipoint Broadband Wireless transmission in the 10–66 GHz band, with only a line-of-sight (LOS) capability. It uses a single carrier (SC) physical (PHY) standard.
• IEEE 802.16.2 - Coexistence of broadband wireless access systems.
• IEEE 802.16a (the former 802.16.3) was an amendment to 802.16 and delivered a point to multipoint capability in the 2–11 GHz band. For this to be of use, it also required a non-line-of-sight (NLOS) capability, and the PHY standard was therefore extended to include Orthogonal Frequency Division Multiplex (OFDM) and Orthogonal Frequency Division Multiple Access (OFDMA). 802.16a was ratified in January 2003 and was intended to provide "last mile" fixed broadband access.

802.16c, a further amendment to 802.16, delivered a system profile for the 10–66 GHz 802.16 standard.

In September 2003, a revision project called 802.16d commenced aiming to align the standard with aspects of the European Telecommunications Standards Institute (ETSI) HIPERMAN standard as well as lay down conformance and test specifications. This project concluded in 2004 with the release of 802.16-2004 which superseded the earlier 802.16 documents, including the a and c amendments.

An amendment to 802.16-2004, IEEE 802.16e-2005, addressing mobility, was concluded in 2005. This implemented a number of enhancements to 802.16-2004, including better support for Quality of Service and the use of Scalable OFDMA, and is sometimes called “Mobile WiMAX”, after the WiMAX forum for interoperability. The fixed and mobile variants of the protocol do not interoperate. In 2007, the Radiocommunication Assembly of the International Telecommunication Union (ITU) approved IEEE 802.16e-2005 as meeting the "International Mobile Telecommunications 2000" requirements, which were generally meant for products marketed as 3G.

802.16e-2005 Technology

The 802.16 standard essentially standardizes two aspects of the air interface - the physical layer (PHY) and the Media Access Control layer (MAC). This section provides an overview of the technology employed in these two layers in the mobile 802.16e specification.

PHY

802.16e uses Scalable OFDMA to carry data, supporting channel bandwidths of between 1.25 MHz and 20 MHz, with up to 2048 sub-carriers. It supports adaptive modulation and coding, so that in conditions of good signal, a highly efficient 64 QAM coding scheme is used, whereas when the signal is poorer, a more robust BPSK coding mechanism is used. In intermediate conditions, 16 QAM and QPSK can also be employed. Other PHY features include support for Multiple-in Multiple-out (MIMO) antennas in order to provide good non-line-of-sight propagation (NLOS) characteristics (or higher bandwidth) and Hybrid automatic repeat request (HARQ) for good error correction performance.

Although the standards allow operation in any band from 2 to 66 GHz, mobile operation is best in the lower bands which are also the most crowded, and therefore most expensive.

MAC

The 802.16 MAC describes a number of Convergence Sublayers which describe how wireline technologies such as Ethernet, Asynchronous Transfer Mode (ATM) and Internet Protocol (IP) are encapsulated on the air interface, and how data is classified, etc. It also describes how secure communications are delivered, by using secure key exchange during authentication, and encryption using Advanced Encryption Standard (AES) or Data Encryption Standard (DES) during data transfer. Further features of the MAC layer include power saving mechanisms (using Sleep Mode and Idle Mode) and handover mechanisms.

A key feature of 802.16 is that it is a connection oriented technology. The subscriber station (SS) cannot transmit data until it has been allocated a channel by the Base Station (BS). This allows 802.16e to provide strong support for Quality of Service (QoS).

QoS

Quality of service (QoS) in 802.16e is supported by allocating each connection between the SS and the BS (called a service flow in 802.16 terminology) to a specific QoS class. In 802.16e, there are 5 QoS classes:

802.16e-2005 QoS classes

Service	Abbrev	Definition	Typical Applications
Unsolicited Grant Service	UGS	Real-time data streams comprising fixed-size data packets issued at periodic intervals	T1/E1 transport
Extended Real-time Polling Service	ertPS	Real-time service flows that generate variable-sized data packets on a periodic basis	VoIP
Real-time Polling Service	rtPS	Real-time data streams comprising variable-sized data packets that are issued at periodic intervals	MPEG Video
Non-real-time Polling Service	nrtPS	Delay-tolerant data streams comprising variable-sized data packets for which a minimum data rate is required	FTP with guaranteed minimum throughput
Best Effort	BE	Data streams for which no minimum service level is required and therefore may be handled on a space-available basis	HTTP

The BS and the SS use a service flow with an appropriate QoS class (plus other parameters, such as bandwidth and delay) to ensure that application data receives QoS treatment appropriate to the application.

Certification

Because the IEEE only sets specifications but does not test equipment for compliance with them, the WiMAX Forum runs a certification program wherein members pay for certification. WiMAX certification by this group is intended to guarantee compliance with the standard and interoperability with equipment from other manufacturers. The mission of the Forum is to promote and certify compatibility and interoperability of broadband wireless products.

See also

• WiBro
• WiMAX
• WiBAS
• WiMAX MIMO
• History of wireless mesh networking

External links

• "The IEEE 802.16 Working Group on Broadband Wireless Access Standards". Official web site.
• "802.16: Broadband Wireless MANs". Get IEEE 802 official standards download.
  • IEEE Std 802.16-2004
  • IEEE Std 802.16e-2005
  • IEEE Std 802.16-2009
• The WiMAX Forum
• The implications of WiMAX for competition and regulation A paper of the OECD, Organisation for Economic Co-operation and Development