Robotics: Difference between revisions
Line 244: | Line 244: | ||
==== Walking applied to robots ==== |
==== Walking applied to robots ==== |
||
[[File:Icub.jpg|thumb|[[iCub]] robot, designed by the [[RobotCub Consortium]] ]] |
[[File:Icub.jpg|thumb|[[iCub]] robot, designed by the [[RobotCub Consortium]] ]] |
||
Walking is a difficult and dynamic problem to solve. Several robots have been made which can walk reliably on two legs, however none have yet been made which are as robust as a human. There has been much study on human inspired walking, such as AMBER lab which was established in 2008 by the Mechanical Engineering Department at Texas A&M University.<ref>[http://www.bipedalrobotics.com]</ref> Many other robots have been built that walk on more than two legs, due to these robots being significantly easier to construct.<ref>[http://www.hexapodrobot.com/index.html Multipod robots easy to construct]</ref><ref>[http://mecatron.rma.ac.be/pub/2005/ISMCR05_verlinden.pdf AMRU-5 hexapod robot]</ref> Hybrids too have been proposed in movies such as [[I, Robot (film)|I, Robot]], where they walk on 2 legs and switch to 4 (arms+legs) when going to a sprint. Typically, robots on 2 legs can walk well on flat floors and can occasionally walk up [[stairway|stairs]]. None can walk over rocky, uneven terrain. Some of the methods which have been tried are: |
Walking is a difficult and dynamic problem to solve. Several robots have been made which can walk reliably on two legs, however none have yet been made which are as robust as a human. There has been much study on human inspired walking, such as AMBER lab which was established in 2008 by the Mechanical Engineering Department at Texas A&M University.<ref>[http://www.bipedalrobotics.com AMBER lab]</ref> Many other robots have been built that walk on more than two legs, due to these robots being significantly easier to construct.<ref>[http://www.hexapodrobot.com/index.html Multipod robots easy to construct]</ref><ref>[http://mecatron.rma.ac.be/pub/2005/ISMCR05_verlinden.pdf AMRU-5 hexapod robot]</ref> Hybrids too have been proposed in movies such as [[I, Robot (film)|I, Robot]], where they walk on 2 legs and switch to 4 (arms+legs) when going to a sprint. Typically, robots on 2 legs can walk well on flat floors and can occasionally walk up [[stairway|stairs]]. None can walk over rocky, uneven terrain. Some of the methods which have been tried are: |
||
===== ZMP Technique ===== |
===== ZMP Technique ===== |
Revision as of 03:39, 25 January 2012
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c5/Shadow_Hand_Bulb_large.jpg/220px-Shadow_Hand_Bulb_large.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/8a/Automation_of_foundry_with_robot.jpg/220px-Automation_of_foundry_with_robot.jpg)
Robotics is the branch of technology that deals with the design, construction, operation, structural disposition, manufacture and application of robots.[3] Robotics is related to the sciences of electronics, engineering, mechanics, mechatronics, and software.[4]
The concept and creation of machines that could operate autonomously dates back to classical times, but research into the functionality and potential uses of robots did not grow substantially until the 20th century. Today, robotics is a rapidly growing field, as we continue to research, design, and build new robots that serve various practical purposes, whether domestically, commercially, or militarily.
Etymology
The word robotics was derived from the word robot, which was introduced to the public by Czech writer Karel Čapek in his play R.U.R. (Rossum's Universal Robots), which premiered in 1921.[5]
According to the Oxford English Dictionary, the word robotics was first used in print by Isaac Asimov, in his science fiction short story "Liar!", published in May 1941 in Astounding Science Fiction. Asimov was unaware that he was coining the term; since the science and technology of electrical devices is electronics, he assumed robotics already referred to the science and technology of robots. In some of Asimov's other works, he states that the first use of the word robotics was in his short story Runaround (Astounding Science Fiction, March 1942).[6][7] However, the original publication of "Liar!" predates that of "Runaround" by five months, so the former is generally cited as the word's origin.
History
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/87/Capek_play.jpg/220px-Capek_play.jpg)
Stories of artificial helpers and companions and attempts to create them have a long history.
The word robot was introduced to the public by the Czech writer Karel Čapek in his play R.U.R. (Rossum's Universal Robots), published in 1920.[5] The play begins in a factory that makes artificial people called robots creatures who can be mistaken for humans – though they are closer to the modern ideas of androids. Karel Čapek himself did not coin the word. He wrote a short letter in reference to an etymology in the Oxford English Dictionary in which he named his brother Josef Čapek as its actual originator.[5]
In 1927 the Maschinenmensch ("machine-human") gynoid humanoid robot (also called "Parody", "Futura", "Robotrix", or the "Maria impersonator") was the first and perhaps the most memorable depiction of a robot ever to appear on film was played by German actress Brigitte Helm in Fritz Lang's film Metropolis.
In 1942 the science fiction writer Isaac Asimov formulated his Three Laws of Robotics and, in the process of doing so, coined the word "robotics" (see details in "Etymology" section below).
In 1948 Norbert Wiener formulated the principles of cybernetics, the basis of practical robotics.
Fully autonomous robots only appeared in the second half of the 20th century. The first digitally operated and programmable robot, the Unimate, was installed in 1961 to lift hot pieces of metal from a die casting machine and stack them. Commercial and industrial robots are widespread today and used to perform jobs more cheaply, or more accurately and reliably, than humans. They are also employed in jobs which are too dirty, dangerous, or dull to be suitable for humans. Robots are widely used in manufacturing, assembly, packing and packaging, transport, earth and space exploration, surgery, weaponry, laboratory research, safety, and the mass production of consumer and industrial goods.[8]
Date | Significance | Robot Name | Inventor |
---|---|---|---|
Third century B.C. and earlier | One of the earliest descriptions of automata appears in the Lie Zi text, on a much earlier encounter between King Mu of Zhou (1023-957 BC) and a mechanical engineer known as Yan Shi, an 'artificer'. The latter allegedly presented the king with a life-size, human-shaped figure of his mechanical handiwork.[9] | Yan Shi | |
First century A.D. and earlier | Descriptions of more than 100 machines and automata, including a fire engine, a wind organ, a coin-operated machine, and a steam-powered engine, in Pneumatica and Automata by Heron of Alexandria | Ctesibius, Philo of Byzantium, Heron of Alexandria, and others | |
1206 | Created early humanoid automata, programmable automaton band[10] | Robot band, hand-washing automaton,[11] automated moving peacocks[12] | Al-Jazari |
1495 | Designs for a humanoid robot | Mechanical knight | Leonardo da Vinci |
1738 | Mechanical duck that was able to eat, flap its wings, and excrete | Digesting Duck | Jacques de Vaucanson |
1898 | Nikola Tesla demonstrates first radio-controlled vessel. | Teleautomaton | Nikola Tesla |
1921 | First fictional automatons called "robots" appear in the play R.U.R. | Rossum's Universal Robots | Karel Čapek |
1930s | Humanoid robot exhibited at the 1939 and 1940 World's Fairs | Elektro | Westinghouse Electric Corporation |
1948 | Simple robots exhibiting biological behaviors[13] | Elsie and Elmer | William Grey Walter |
1956 | First commercial robot, from the Unimation company founded by George Devol and Joseph Engelberger, based on Devol's patents[14] | Unimate | George Devol |
1961 | First installed industrial robot. | Unimate | George Devol |
1963 | First palletizing robot[15] | Palletizer | Fuji Yusoki Kogyo |
1973 | First industrial robot with six electromechanically driven axes[16] | Famulus | KUKA Robot Group |
1975 | Programmable universal manipulation arm, a Unimation product | PUMA | Victor Scheinman |
Components
Power source
At present; mostly (lead-acid) batteries are used, but potential power sources could be:
- pneumatic (compressed gases)
- hydraulics (liquids)
- flywheel energy storage
- organic garbage (through anaerobic digestion)
- faeces (human, animal); may be interesting in a military context as faeces of small combat groups may be reused for the energy requirements of the robot assistant (see DEKA's project Slingshot Stirling engine on how the system would operate)
- still unproven energy sources: for example Nuclear fusion, as yet not used in nuclear reactors whereas Nuclear fission is proven (although there are not many robots using it as a power source apart from the Chinese rover tests.[17]).
- radioactive source (such as with the proposed Ford car of the '50s); to those proposed in movies such as Red Planet
Actuation
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/07/2005-11-14_ShadowLeg_Finished_medium.jpg/220px-2005-11-14_ShadowLeg_Finished_medium.jpg)
Actuators are like the "muscles" of a robot, the parts which convert stored energy into movement. By far the most popular actuators are electric motors that spin a wheel or gear, and linear actuators that control industrial robots in factories. But there are some recent advances in alternative types of actuators, powered by electricity, chemicals, or compressed air:
Electric motors
The vast majority of robots use electric motors, often brushed and brushless DC motors in portable robots or AC motors in industrial robots and CNC machines.
Linear actuators
Various types of linear actuators move in and out instead of by spinning, particularly when very large forces are needed such as with industrial robotics. They are typically powered by compressed air (pneumatic actuator) or an oil (hydraulic actuator).
Series elastic actuators
A spring can be designed as part of the motor actuator, to allow improved force control. It has been used in various robots, particularly walking humanoid robots.[18]
Air muscles
Pneumatic artificial muscles, also known as air muscles, are special tubes that contract (typically up to 40%) when air is forced inside them. They have been used for some robot applications.[19][20]
Muscle wire
Muscle wire, also known as Shape Memory Alloy, Nitinol or Flexinol Wire, is a material that contracts slightly (typically under 5%) when electricity runs through it. They have been used for some small robot applications.[21][22]
Electroactive polymers
EAPs or EPAMs are a new plastic material that can contract substantially (up to 380% activation strain) from electricity, and have been used in facial muscles and arms of humanoid robots,[23] and to allow new robots to float,[24] fly, swim or walk.[25]
Piezo motors
Recent alternatives to DC motors are piezo motors or ultrasonic motors. These work on a fundamentally different principle, whereby tiny piezoceramic elements, vibrating many thousands of times per second, cause linear or rotary motion. There are different mechanisms of operation; one type uses the vibration of the piezo elements to walk the motor in a circle or a straight line.[26] Another type uses the piezo elements to cause a nut to vibrate and drive a screw. The advantages of these motors are nanometer resolution, speed, and available force for their size.[27] These motors are already available commercially, and being used on some robots.[28][29]
Elastic nanotubes
Elastic nanotubes are a promising artificial muscle technology in early-stage experimental development. The absence of defects in carbon nanotubes enables these filaments to deform elastically by several percent, with energy storage levels of perhaps 10 J/cm3 for metal nanotubes. Human biceps could be replaced with an 8 mm diameter wire of this material. Such compact "muscle" might allow future robots to outrun and outjump humans.[30]
Sensing
Touch
Current robotic and prosthetic hands receive far less tactile information than the human hand. Recent research has developed a tactile sensor array that mimics the mechanical properties and touch receptors of human fingertips.[31][32] The sensor array is constructed as a rigid core surrounded by conductive fluid contained by an elastomeric skin. Electrodes are mounted on the surface of the rigid core and are connected to an impedance-measuring device within the core. When the artificial skin touches an object the fluid path around the electrodes is deformed, producing impedance changes that map the forces received from the object. The researchers expect that an important function of such artificial fingertips will be adjusting robotic grip on held objects.
Scientists from several European countries and Israel developed a prosthetic hand in 2009, called SmartHand, which functions like a real one—allowing patients to write with it, type on a keyboard, play piano and perform other fine movements. The prosthesis has sensors which enable the patient to sense real feeling in its fingertips.[33]
Vision
Computer vision is the science and technology of machines that see. As a scientific discipline, computer vision is concerned with the theory behind artificial systems that extract information from images. The image data can take many forms, such as video sequences and views from cameras.
In most practical computer vision applications, the computers are pre-programmed to solve a particular task, but methods based on learning are now becoming increasingly common.
Computer vision systems rely on image sensors which detect electromagnetic radiation which is typically in the form of either visible light or infra-red light. The sensors are designed using solid-state physics. The process by which light propagates and reflects off surfaces is explained using optics. Sophisticated image sensors even require quantum mechanics to provide a complete understanding of the image formation process.
There is a subfield within computer vision where artificial systems are designed to mimic the processing and behavior of biological systems, at different levels of complexity. Also, some of the learning-based methods developed within computer vision have their background in biology.
Other
Other common forms of sensing in robotics use LIDAR, RADAR and SONAR.[citation needed]
Manipulation
Robots need to manipulate objects; pick up, modify, destroy, or otherwise have an effect. Thus the "hands" of a robot are often referred to as end effectors,[34] while the "arm" is referred to as a manipulator.[35] Most robot arms have replaceable effectors, each allowing them to perform some small range of tasks. Some have a fixed manipulator which cannot be replaced, while a few have one very general purpose manipulator, for example a humanoid hand.
For the definitive guide to all forms of robot end-effectors, their design, and usage consult the book "Robot Grippers".[36]
Mechanical grippers
One of the most common effectors is the gripper. In its simplest manifestation it consists of just two fingers which can open and close to pick up and let go of a range of small objects. Fingers can for example be made of a chain with a metal wire run through it.[37] Hands that resemble and work more like a human hand include the Shadow Hand, the Robonaut hand,[38] ... Hands that are of a mid-level complexity include ie the Delft hand, ...[39][40]
Vacuum grippers
Vacuum grippers are very simple astrictive[41] devices, but can hold very large loads provided the prehension surface is smooth enough to ensure suction.
Pick and place robots for electronic components and for large objects like car windscreens, often use very simple vacuum grippers.
General purpose effectors
Some advanced robots are beginning to use fully humanoid hands, like the Shadow Hand, MANUS,[42] and the Schunk hand.[43] These highly dexterous manipulators, with as many as 20 degrees of freedom and hundreds of tactile sensors.[44]
Locomotion
Rolling robots
For simplicity most mobile robots have four wheels or a number of continuous tracks. Some researchers have tried to create more complex wheeled robots with only one or two wheels. These can have certain advantages such as greater efficiency and reduced parts, as well as allowing a robot to navigate in confined places that a four wheeled robot would not be able to.
Two-wheeled balancing robots
Balancing robots generally use a gyroscope to detect how much a robot is falling and then drive the wheels proportionally in the opposite direction, to counter-balance the fall at hundreds of times per second, based on the dynamics of an inverted pendulum.[45] Many different balancing robots have been designed.[46] While the Segway is not commonly thought of as a robot, it can be thought of as a component of a robot, such as NASA's Robonaut that has been mounted on a Segway.[47]
One-wheeled balancing robots
A one-wheeled balancing robot is an extension of a two-wheeled balancing robot so that it can move in any 2D direction using a round ball as its only wheel. Several one-wheeled balancing robots have been designed recently, such as Carnegie Mellon University's "Ballbot" that is the approximate height and width of a person, and Tohoku Gakuin University's "BallIP".[48] Because of the long, thin shape and ability to maneuver in tight spaces, they have the potential to function better than other robots in environments with people.[49]
Spherical orb robots
Several attempts have been made in robots that are completely inside a spherical ball, either by spinning a weight inside the ball,[50][51] or by rotating the outer shells of the sphere.[52][53] These have also been referred to as an orb bot [54] or a ball bot[55][56]
Six-wheeled robots
Using six wheels instead of four wheels can give better traction or grip in outdoor terrain such as on rocky dirt or grass.
Tracked robots
Tank tracks provide even more traction than a six-wheeled robot. Tracked wheels behave as if they were made of hundreds of wheels, therefore are very common for outdoor and military robots, where the robot must drive on very rough terrain. However, they are difficult to use indoors such as on carpets and smooth floors. Examples include NASA's Urban Robot "Urbie".[57]
Walking applied to robots
Walking is a difficult and dynamic problem to solve. Several robots have been made which can walk reliably on two legs, however none have yet been made which are as robust as a human. There has been much study on human inspired walking, such as AMBER lab which was established in 2008 by the Mechanical Engineering Department at Texas A&M University.[58] Many other robots have been built that walk on more than two legs, due to these robots being significantly easier to construct.[59][60] Hybrids too have been proposed in movies such as I, Robot, where they walk on 2 legs and switch to 4 (arms+legs) when going to a sprint. Typically, robots on 2 legs can walk well on flat floors and can occasionally walk up stairs. None can walk over rocky, uneven terrain. Some of the methods which have been tried are:
ZMP Technique
The Zero Moment Point (ZMP) is the algorithm used by robots such as Honda's ASIMO. The robot's onboard computer tries to keep the total inertial forces (the combination of earth's gravity and the acceleration and deceleration of walking), exactly opposed by the floor reaction force (the force of the floor pushing back on the robot's foot). In this way, the two forces cancel out, leaving no moment (force causing the robot to rotate and fall over).[61] However, this is not exactly how a human walks, and the difference is obvious to human observers, some of whom have pointed out that ASIMO walks as if it needs the lavatory.[62][63][64] ASIMO's walking algorithm is not static, and some dynamic balancing is used (see below). However, it still requires a smooth surface to walk on.
Hopping
Several robots, built in the 1980s by Marc Raibert at the MIT Leg Laboratory, successfully demonstrated very dynamic walking. Initially, a robot with only one leg, and a very small foot, could stay upright simply by hopping. The movement is the same as that of a person on a pogo stick. As the robot falls to one side, it would jump slightly in that direction, in order to catch itself.[65] Soon, the algorithm was generalised to two and four legs. A bipedal robot was demonstrated running and even performing somersaults.[66] A quadruped was also demonstrated which could trot, run, pace, and bound.[67] For a full list of these robots, see the MIT Leg Lab Robots page.
Dynamic balancing (controlled falling)
A more advanced way for a robot to walk is by using a dynamic balancing algorithm, which is potentially more robust than the Zero Moment Point technique, as it constantly monitors the robot's motion, and places the feet in order to maintain stability.[68] This technique was recently demonstrated by Anybots' Dexter Robot,[69] which is so stable, it can even jump.[70] Another example is the TU Delft Flame.
Passive dynamics
Perhaps the most promising approach utilizes passive dynamics where the momentum of swinging limbs is used for greater efficiency. It has been shown that totally unpowered humanoid mechanisms can walk down a gentle slope, using only gravity to propel themselves. Using this technique, a robot need only supply a small amount of motor power to walk along a flat surface or a little more to walk up a hill. This technique promises to make walking robots at least ten times more efficient than ZMP walkers, like ASIMO.[71][72]
Other methods of locomotion
Flying
A modern passenger airliner is essentially a flying robot, with two humans to manage it. The autopilot can control the plane for each stage of the journey, including takeoff, normal flight, and even landing.[73] Other flying robots are uninhabited, and are known as unmanned aerial vehicles (UAVs). They can be smaller and lighter without a human pilot onboard, and fly into dangerous territory for military surveillance missions. Some can even fire on targets under command. UAVs are also being developed which can fire on targets automatically, without the need for a command from a human. Other flying robots include cruise missiles, the Entomopter, and the Epson micro helicopter robot. Robots such as the Air Penguin, Air Ray, and Air Jelly have lighter-than-air bodies, propelled by paddles, and guided by sonar.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/be/Robosnakes.jpg/220px-Robosnakes.jpg)
Snaking
Several snake robots have been successfully developed. Mimicking the way real snakes move, these robots can navigate very confined spaces, meaning they may one day be used to search for people trapped in collapsed buildings.[74] The Japanese ACM-R5 snake robot[75] can even navigate both on land and in water.[76]
Skating
A small number of skating robots have been developed, one of which is a multi-mode walking and skating device. It has four legs, with unpowered wheels, which can either step or roll.[77] Another robot, Plen, can use a miniature skateboard or rollerskates, and skate across a desktop.[78]
Climbing
Several different approaches have been used to develop robots that have the ability to climb vertical surfaces. One approach mimicks the movements of a human climber on a wall with protrusions; adjusting the center of mass and moving each limb in turn to gain leverage. An example of this is Capuchin,[79] built by Stanford University, California. Another approach uses the specialised toe pad method of wall-climbing geckoes, which can run on smooth surfaces such as vertical glass. Examples of this approach include Wallbot [80] and Stickybot.[81] China's "Technology Daily" November 15, 2008 reported New Concept Aircraft (ZHUHAI) Co., Ltd. Dr. Li Hiu Yeung and his research group have recently successfully developed the bionic gecko robot "Speedy Freelander".According to Dr. Li introduction, this gecko robot can rapidly climbing up and down in a variety of building walls, ground and vertical wall fissure or walking upside down on the ceiling, it is able to adapt on smooth glass, rough or sticky dust walls as well as the various surface of metallic materials and also can automatically identify obstacles, circumvent the bypass and flexible and realistic movements. Its flexibility and speed are comparable to the natural gecko. A third approach is to mimick the motion of a snake climbing a pole[citation needed].
Swimming (like a fish)
It is calculated that when swimming some fish can achieve a propulsive efficiency greater than 90%.[82] Furthermore, they can accelerate and maneuver far better than any man-made boat or submarine, and produce less noise and water disturbance. Therefore, many researchers studying underwater robots would like to copy this type of locomotion.[83] Notable examples are the Essex University Computer Science Robotic Fish,[84] and the Robot Tuna built by the Institute of Field Robotics, to analyze and mathematically model thunniform motion.[85] The Aqua Penguin, designed and built by Festo of Germany, copies the streamlined shape and propulsion by front "flippers" of penguins. Festo have also built the Aqua Ray and Aqua Jelly, which emulate the locomotion of manta ray, and jellyfish, respectively.
Environmental interaction and navigation
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/ElementBlack2.jpg/200px-ElementBlack2.jpg)
Though a significant percentage of robots in commission today are either human controlled, or operate in a static environment, there is an increasing interest in robots that can operate autonomously in a dynamic environment. These robots require some combination of navigation hardware and software in order to traverse their environment. In particular unforeseen events (e.g. people and other obstacles that are not stationary) can cause problems or collisions. Some highly advanced robots as ASIMO, EveR-1, Meinü robot have particularly good robot navigation hardware and software. Also, self-controlled cars, Ernst Dickmanns' driverless car, and the entries in the DARPA Grand Challenge, are capable of sensing the environment well and subsequently making navigational decisions based on this information. Most of these robots employ a GPS navigation device with waypoints, along with radar, sometimes combined with other sensory data such as LIDAR, video cameras, and inertial guidance systems for better navigation between waypoints.
Human-robot interaction
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/01/Kismet_robot_20051016.jpg/140px-Kismet_robot_20051016.jpg)
If robots are to work effectively in homes and other non-industrial environments, the way they are instructed to perform their jobs, and especially how they will be told to stop will be of critical importance. The people who interact with them may have little or no training in robotics, and so any interface will need to be extremely intuitive. Science fiction authors also typically assume that robots will eventually be capable of communicating with humans through speech, gestures, and facial expressions, rather than a command-line interface. Although speech would be the most natural way for the human to communicate, it is unnatural for the robot. It will probably be a long time before robots interact as naturally as the fictional C-3PO.
Speech recognition
Interpreting the continuous flow of sounds coming from a human, in real time, is a difficult task for a computer, mostly because of the great variability of speech.[86] The same word, spoken by the same person may sound different depending on local acoustics, volume, the previous word, whether or not the speaker has a cold, etc.. It becomes even harder when the speaker has a different accent.[87] Nevertheless, great strides have been made in the field since Davis, Biddulph, and Balashek designed the first "voice input system" which recognized "ten digits spoken by a single user with 100% accuracy" in 1952.[88] Currently, the best systems can recognize continuous, natural speech, up to 160 words per minute, with an accuracy of 95%.[89]
Robotic voice
Other hurdles exist when allowing the robot to use voice for interacting with humans. For social reasons, synthetic voice proves suboptimal as a communication medium,[90] making it necessary to develop the emotional component of robotic voice through various techniques.[91] [92]
Gestures
One can imagine, in the future, explaining to a robot chef how to make a pastry, or asking directions from a robot police officer. In both of these cases, making hand gestures would aid the verbal descriptions. In the first case, the robot would be recognizing gestures made by the human, and perhaps repeating them for confirmation. In the second case, the robot police officer would gesture to indicate "down the road, then turn right". It is likely that gestures will make up a part of the interaction between humans and robots.[93] A great many systems have been developed to recognize human hand gestures.[94]
Facial expression
Facial expressions can provide rapid feedback on the progress of a dialog between two humans, and soon it may be able to do the same for humans and robots. Robotic faces have been constructed by Hanson Robotics using their elastic polymer called Frubber, allowing a great amount of facial expressions due to the elasticity of the rubber facial coating and imbedded subsurface motors (servos) to produce the facial expressions.[95] The coating and servos are built on a metal skull. A robot should know how to approach a human, judging by their facial expression and body language. Whether the person is happy, frightened, or crazy-looking affects the type of interaction expected of the robot. Likewise, robots like Kismet and the more recent addition, Nexi[96] can produce a range of facial expressions, allowing it to have meaningful social exchanges with humans.[97]
Artificial emotions
Artificial emotions can also be imbedded and are composed of a sequence of facial expressions and/or gestures. As can be seen from the movie Final Fantasy: The Spirits Within, the programming of these artificial emotions is complex and requires a great amount of human observation. To simplify this programming in the movie, presets were created together with a special software program. This decreased the amount of time needed to make the film. These presets could possibly be transferred for use in real-life robots.
Personality
Many of the robots of science fiction have a personality, something which may or may not be desirable in the commercial robots of the future.[98] Nevertheless, researchers are trying to create robots which appear to have a personality:[99][100] i.e. they use sounds, facial expressions, and body language to try to convey an internal state, which may be joy, sadness, or fear. One commercial example is Pleo, a toy robot dinosaur, which can exhibit several apparent emotions.[101]
Control
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/5d/Magnus_B._Egerstedt_puppet.jpg/220px-Magnus_B._Egerstedt_puppet.jpg)
The mechanical structure of a robot must be controlled to perform tasks. The control of a robot involves three distinct phases - perception, processing, and action (robotic paradigms). Sensors give information about the environment or the robot itself (e.g. the position of its joints or its end effector). This information is then processed to calculate the appropriate signals to the actuators (motors) which move the mechanical.
The processing phase can range in complexity. At a reactive level, it may translate raw sensor information directly into actuator commands. Sensor fusion may first be used to estimate parameters of interest (e.g. the position of the robot's gripper) from noisy sensor data. An immediate task (such as moving the gripper in a certain direction) is inferred from these estimates. Techniques from control theory convert the task into commands that drive the actuators.
At longer time scales or with more sophisticated tasks, the robot may need to build and reason with a "cognitive" model. Cognitive models try to represent the robot, the world, and how they interact. Pattern recognition and computer vision can be used to track objects. Mapping techniques can be used to build maps of the world. Finally, motion planning and other artificial intelligence techniques may be used to figure out how to act. For example, a planner may figure out how to achieve a task without hitting obstacles, falling over, etc.
Autonomy levels
Control systems may also have varying levels of autonomy.
- Direct interaction is used for haptic or tele-operated devices, and the human has nearly complete control over the robot's motion.
- Operator-assist modes have the operator commanding medium-to-high-level tasks, with the robot automatically figuring out how to achieve them.
- An autonomous robot may go for extended periods of time without human interaction. Higher levels of autonomy do not necessarily require more complex cognitive capabilities. For example, robots in assembly plants are completely autonomous, but operate in a fixed pattern.
Another classification takes into account the interaction between human control and the machine motions.
- Teleoperation. A human controls each movement, each machine actuator change is specified by the operator.
- Supervisory. A human specifies general moves or position changes and the machine decides specific movements of its actuators.
- Task-level autonomy. The operator specifies only the task and the robot manages itself to complete it.
- Full autonomy. The machine will create and complete all its tasks without human interaction.
Robotics research
Much of the research in robotics focuses not on specific industrial tasks, but on investigations into new types of robots, alternative ways to think about or design robots, and new ways to manufacture them but other investigations, such as MIT's cyberflora project, are almost wholly academic.
A first particular new innovation in robot design is the opensourcing of robot-projects. To describe the level of advancement of a robot, the term "Generation Robots" can be used. This term is coined by Professor Hans Moravec, Principal Research Scientist at the Carnegie Mellon University Robotics Institute in describing the near future evolution of robot technology. First generation robots, Moravec predicted in 1997, should have an intellectual capacity comparable to perhaps a lizard and should become available by 2010. Because the first generation robot would be incapable of learning, however, Moravec predicts that the second generation robot would be an improvement over the first and become available by 2020, with the intelligence maybe comparable to that of a mouse. The third generation robot should have the intelligence comparable to that of a monkey. Though fourth generation robots, robots with human intelligence, professor Moravec predicts, would become possible, he does not predict this happening before around 2040 or 2050.[102]
The second is Evolutionary Robots. This is a methodology that uses evolutionary computation to help design robots, especially the body form, or motion and behavior controllers. In a similar way to natural evolution, a large population of robots is allowed to compete in some way, or their ability to perform a task is measured using a fitness function. Those that perform worst are removed from the population, and replaced by a new set, which have new behaviors based on those of the winners. Over time the population improves, and eventually a satisfactory robot may appear. This happens without any direct programming of the robots by the researchers. Researchers use this method both to create better robots,[103] and to explore the nature of evolution.[104] Because the process often requires many generations of robots to be simulated,[105] this technique may be run entirely or mostly in simulation, then tested on real robots once the evolved algorithms are good enough.[106] Currently, there are about 1 million industrial robots toiling around the world, and Japan is the top country having high density of utilizing robots in its manufacturing industry.[citation needed]
Dynamics and kinematics
The study of motion can be divided into kinematics and dynamics. Direct kinematics refers to the calculation of end effector position, orientation, velocity, and acceleration when the corresponding joint values are known. Inverse kinematics refers to the opposite case in which required joint values are calculated for given end effector values, as done in path planning. Some special aspects of kinematics include handling of redundancy (different possibilities of performing the same movement), collision avoidance, and singularity avoidance. Once all relevant positions, velocities, and accelerations have been calculated using kinematics, methods from the field of dynamics are used to study the effect of forces upon these movements. Direct dynamics refers to the calculation of accelerations in the robot once the applied forces are known. Direct dynamics is used in computer simulations of the robot. Inverse dynamics refers to the calculation of the actuator forces necessary to create a prescribed end effector acceleration. This information can be used to improve the control algorithms of a robot.
In each area mentioned above, researchers strive to develop new concepts and strategies, improve existing ones, and improve the interaction between these areas. To do this, criteria for "optimal" performance and ways to optimize design, structure, and control of robots must be developed and implemented.
Education and training
![](http://upload.wikimedia.org/wikipedia/commons/3/3d/ER4u.jpg)
Robots have become a popular educational tool in some middle and high schools, as well as in numerous youth summer camps, raising interest in programming, artificial intelligence and robotics among students. First-year computer science courses at several universities now include programming of a robot in addition to traditional software engineering-based coursework.
Career training
Universities offer Bachelors, Masters, and Doctoral degrees in the field of robotics. Some Private Career Colleges and vocational schools offer robotics training aimed at careers in robotics.
Certification
The Robotics Certification Standards Alliance (RCSA) is an international robotics certification authority that confers various industry- and educational-related robotics certifications.
Summer robotics camp
Several national summer camp programs include robotics as part of their core curriculum, including Digital Media Academy, RoboTech, and Cybercamps. In addition, youth summer robotics programs are frequently offered by celebrated museums such as the American Museum of Natural History[107] and The Tech Museum of Innovation in Silicon Valley, CA, just to name a few.
Employment
![](http://upload.wikimedia.org/wikipedia/en/thumb/1/10/MobileRobotsPioneerAT.jpg/220px-MobileRobotsPioneerAT.jpg)
Robotics is an essential component in many modern manufacturing environments. As factories increase their use of robots, the number of robotics–related jobs grow and have been observed to be steadily rising.
Effects on unemployment
Some analysts, such as Martin Ford, author of The Lights in the Tunnel: Automation, Accelerating Technology and the Economy of the Future,[108] argue that robots and other forms of automation will ultimately result in significant unemployment unless the economy is engineered to absorb them without displacing humans, as machines begin to match and exceed the capability of workers to perform most jobs. At present the negative impact is only on menial and repetitive jobs, and there is actually a positive impact on the number of jobs for highly skilled technicians, engineers, and specialists. However, these highly skilled jobs are not sufficient in number to offset the greater decrease in employment among the general population, causing structural unemployment in which overall (net) unemployment rises.
As robotics and artificial intelligence develop further, some worry that even many skilled jobs may be threatened. According to conventional economic theory, this should merely cause an increase in the productivity of the involved industries; resulting in higher demand for other goods, and hence higher labour demand in these sectors and off-setting whatever negatives are caused. Conventional theory describes the past well, but may not describe future scenarios due to shifts in the parameter values that shape the context (see Automation and its effects on unemployment).
See also
Notes
- ^ "A Ping-Pong-Playing Terminator". Popular Science.
- ^ "Best robot 2009". www.gadgetrivia.com.
- ^ "robotics". Oxford Dictionaries. Retrieved 4 February 2011.
- ^ "Industry Spotlight: Robotics from Monster Career Advice". Retrieved 2007-08-26.
- ^ a b c Zunt, Dominik. "Who did actually invent the word "robot" and what does it mean?". The Karel Čapek website. Retrieved 2007-09-11. Cite error: The named reference "KapekWebsite" was defined multiple times with different content (see the help page).
- ^ Asimov, Isaac (1996) [1995]. "The Robot Chronicles". Gold. London: Voyager. pp. 224–225. ISBN 0-00-648202-3.
- ^ Asimov, Isaac (1983). "4 The Word I Invented". Counting the Eons. Doubleday.
Robotics has become a sufficiently well developed technology to warrant articles and books on its history and I have watched this in amazement, and in some disbelief, because I invented … the word
- ^ "Robotics: About the Exhibition". The Tech Museum of Innovation. Retrieved 2008-09-15.
- ^ Needham, Joseph (1991). Science and Civilisation in China: Volume 2, History of Scientific Thought. Cambridge University Press. ISBN 0521058007.
- ^ Fowler, Charles B. (October 1967). "The Museum of Music: A History of Mechanical Instruments". Music Educators Journal. 54 (2): 45–49. doi:10.2307/3391092. JSTOR 3391092.
- ^ Rosheim, Mark E. (1994). Robot Evolution: The Development of Anthrobotics. Wiley-IEEE. pp. 9–10. ISBN 0471026220.
- ^ al-Jazari (Islamic artist), Encyclopædia Britannica.
- ^ Imitation of Life: A History of the First Robots
- ^ Waurzyniak, Patrick (2006-07). "Masters of Manufacturing: Joseph F. Engelberger". Society of Manufacturing Engineers. 137 (1).
{{cite journal}}
: Check date values in:|date=
(help) - ^ "Company History". Fuji Yusoki Kogyo Co. Retrieved 2008-09-12.
- ^ "KUKA Industrial Robot FAMULUS". Retrieved 2008-01-10.
- ^ "China Developing Nuclear-Powered Robot Lunar Rover". Fox News. Retrieved 28 February 2011.
- ^ "CiteSeerX — Series Elastic Actuators for legged robots". Citeseerx.ist.psu.edu. Retrieved 2010-11-27.
- ^ Air Muscles from Image Company
- ^ Air Muscles from Shadow Robot
- ^ "TALKING ELECTRONICS Nitinol Page-1". Talkingelectronics.com. Retrieved 2010-11-27.
- ^ "lf205, Hardware: Building a Linux-controlled walking robot". Ibiblio.org. 2001-11-01. Retrieved 2010-11-27.
- ^ "WW-EAP and Artificial Muscles". Eap.jpl.nasa.gov. Retrieved 2010-11-27.
- ^ "Empa - a117-2-eap". Empa.ch. Retrieved 2010-11-27.
- ^ "Electroactive Polymers (EAP) as Artificial Muscles (EPAM) for Robot Applications". Hizook. Retrieved 2010-11-27.
- ^ "Piezo LEGS - -09-26".
- ^ "Squiggle Motors: Overview". Retrieved 2007-10-08.
- ^ Nishibori; et al. (2003). "Robot Hand with Fingers Using Vibration-Type Ultrasonic Motors (Driving Characteristics)". Journal of Robotics and Mechatronics. Retrieved 2007-10-09.
{{cite journal}}
: Cite journal requires|journal=
(help); Explicit use of et al. in:|author=
(help) - ^ Otake; et al. (2001). "Shape Design of Gel Robots made of Electroactive Polymer Gel" (PDF). Retrieved 2007-10-16.
{{cite journal}}
: Cite journal requires|journal=
(help); Explicit use of et al. in:|author=
(help) - ^ John D. Madden, 2007, /science.1146351
- ^ "Syntouch LLC: BioTac(R) Biomimetic Tactile Sensor Array". Retrieved 2009-08-10.
- ^ Wettels, N; Santos, VJ; Johansson, RS; Loeb, Gerald E.; et al. (2008). "Biomimetic tactile sensor array". Advanced Robotics. 22 (8): 829–849. doi:10.1163/156855308X314533.
{{cite journal}}
: Explicit use of et al. in:|first3=
(help) - ^ "What is The SmartHand?". SmartHand Project. Retrieved 4 February 2011.
- ^ "What is a a robotic end-effector?". ATI Industrial Automation. 2007. Retrieved 2007-10-16.
- ^ Crane, Carl D. (1998-03). Kinematic Analysis of Robot Manipulators. Cambridge University Press. ISBN 0521570638. Retrieved 2007-10-16.
{{cite book}}
: Check date values in:|date=
(help); Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ G.J. Monkman, S. Hesse, R. Steinmann & H. Schunk – Robot Grippers - Wiley, Berlin 2007
- ^ Discovery Channel's Mythbusters making mechanical gripper from chain and metal wire
- ^ Robonaut hand
- ^ Delft hand by TU Delft
- ^ Delft hand by Gert Kragten
- ^ Definition "astrictive" (to bind, confine, or constrict) in Collins English Dictionary & Thesaurus
- ^ MANUS
- ^ Allcock, Andrew (2006-09). "Anthropomorphic hand is almost human". Machinery. Retrieved 2007-10-17.
{{cite web}}
: Check date values in:|date=
(help) - ^ Shadowrobot.com
- ^ "T.O.B.B". Mtoussaint.de. Retrieved 2010-11-27.
- ^ "nBot, a two wheel balancing robot". Geology.heroy.smu.edu. Retrieved 2010-11-27.
- ^ "ROBONAUT Activity Report". NASA. 2004-02. Archived from the original on 2007-08-20. Retrieved 2007-10-20.
{{cite web}}
: Check date values in:|date=
(help) - ^ "IEEE Spectrum: A Robot That Balances on a Ball". Spectrum.ieee.org. Retrieved 2010-11-27.
- ^ "Carnegie Mellon Researchers Develop New Type of Mobile Robot That Balances and Moves on a Ball Instead of Legs or Wheels" (Press release). Carnegie Mellon. 2006-08-09. Retrieved 2007-10-20.
- ^ "Spherical Robot Can Climb Over Obstacles". BotJunkie. Retrieved 2010-11-27.
- ^ "Rotundus". Rotundus.se. Retrieved 2010-11-27.
- ^ "OrbSwarm Gets A Brain". BotJunkie. 2007-07-11. Retrieved 2010-11-27.
- ^ "Rolling Orbital Bluetooth Operated Thing". BotJunkie. Retrieved 2010-11-27.
- ^ "Swarm". Orbswarm.com. Retrieved 2010-11-27.
- ^ "The Ball Bot : Johnnytronic@Sun". Blogs.sun.com. Retrieved 2010-11-27.
- ^ "Senior Design Projects | College of Engineering & Applied Science| University of Colorado at Boulder". Engineering.colorado.edu. 2008-04-30. Retrieved 2010-11-27.
- ^ JPL Robotics: System: Commercial Rovers
- ^ AMBER lab
- ^ Multipod robots easy to construct
- ^ AMRU-5 hexapod robot
- ^ "Achieving Stable Walking". Honda Worldwide. Retrieved 2007-10-22.
- ^ "Funny Walk". Pooter Geek. 2004-12-28. Retrieved 2007-10-22.
- ^ "ASIMO's Pimp Shuffle". Popular Science. 2007-01-09. Retrieved 2007-10-22.
- ^ Vtec Forum: A drunk robot? thread
- ^ "3D One-Leg Hopper (1983–1984)". MIT Leg Laboratory. Retrieved 2007-10-22.
- ^ "3D Biped (1989–1995)". MIT Leg Laboratory.
- ^ "Quadruped (1984–1987)". MIT Leg Laboratory.
- ^ "About the robots". Anybots. Archived from the original on 2007-09-09. Retrieved 2007-10-23.
- ^ "Homepage". Anybots. Retrieved 2007-10-23.
- ^ "Dexter Jumps video". YouTube. 2007-03. Retrieved 2007-10-23.
{{cite web}}
: Check date values in:|date=
(help) - ^ Collins, Steve (2005-02-11). "Efficient bipedal robots based on passive-dynamic Walkers" (PDF). Science. 307 (5712): 1082–1085. doi:10.1126/science.1107799. PMID 15718465. Archived from the original (PDF) on 2007-06-22. Retrieved 2007-09-11.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Collins, Steve. "A bipedal walking robot with efficient and human-like gait" (PDF). Proc. IEEE International Conference on Robotics and Automation.
{{cite conference}}
: Unknown parameter|booktitle=
ignored (|book-title=
suggested) (help); Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ "Testing the Limits" (PDF). Boeing. p. page 29. Retrieved 2008-04-09.
{{cite web}}
:|page=
has extra text (help) - ^ Miller, Gavin. "Introduction". snakerobots.com. Retrieved 2007-10-22.
- ^ ACM-R5
- ^ Swimming snake robot (commentary in Japanese)
- ^ "Commercialized Quadruped Walking Vehicle "TITAN VII"". Hirose Fukushima Robotics Lab. Retrieved 2007-10-23.
- ^ "Plen, the robot that skates across your desk". SCI FI Tech. 2007-01-23. Retrieved 2007-10-23.
- ^ Capuchin at YouTube
- ^ Wallbot at YouTube
- ^ Stanford University: Stickybot
- ^ Sfakiotakis; et al. (1999-04). "Review of Fish Swimming Modes for Aquatic Locomotion" (PDF). IEEE Journal of Oceanic Engineering. Archived from the original (PDF) on 2007-09-26. Retrieved 2007-10-24.
{{cite journal}}
: Check date values in:|date=
(help); Cite journal requires|journal=
(help); Explicit use of et al. in:|author=
(help) - ^ Richard Mason. "What is the market for robot fish?".
- ^ "Robotic fish powered by Gumstix PC and PIC". Human Centred Robotics Group at Essex University. Retrieved 2007-10-25.
- ^ Witoon Juwarahawong. "Fish Robot". Institute of Field Robotics. Archived from the original on 2007-11-04. Retrieved 2007-10-25.
- ^ J. Norberto Pires, (2005). "Robot-by-voice: experiments on commanding an industrial robot using the human voice", Industrial Robot: An International Journal, Vol. 32, Issue 6, pp. 505-511, doi: 10.1108/01439910510629244. Available: online and pdf
- ^ Survey of the State of the Art in Human Language Technology: 1.2: Speech Recognition
- ^ Fournier, Randolph Scott., and B. June. Schmidt. "Voice Input Technology: Learning Style and Attitude Toward Its Use." Delta Pi Epsilon Journal 37 (1995): 1_12.
- ^ "History of Speech & Voice Recognition and Transcription Software". Dragon Naturally Speaking. Retrieved 2007-10-27.
- ^ M.L. Walters, D.S. Syrdal, K.L. Koay, K. Dautenhahn, R. te Boekhorst, (2008). Human approach distances to a mechanical-looking robot with different robot voice styles. In: Proceedings of the 17th IEEE International Symposium on Robot and Human Interactive Communication, 2008. RO-MAN 2008, Munich, 1-3 Aug. 2008, pp. 707-712, doi: 10.1109/ROMAN.2008.4600750. Available: online and pdf
- ^ Sandra Pauletto, Tristan Bowles, (2010). Designing the emotional content of a robotic speech signal. In: Proceedings of the 5th Audio Mostly Conference: A Conference on Interaction with Sound, New York, ISBN 978-1-4503-0046-9, doi: 10.1145/1859799.1859804. Available: online
- ^ Tristan Bowles, Sandra Pauletto, (2010). Emotions in the Voice: Humanising a Robotic Voice. In: Proceedings of the 7th Sound and Music Computing Conference, Barcelona, Spain. Available: online
- ^ Waldherr, Romero & Thrun (2000). "A Gesture Based Interface for Human-Robot Interaction" (PDF). Kluwer Academic Publishers. Retrieved 2007-10-28.
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ Markus Kohler. "Vision Based Hand Gesture Recognition Systems". University of Dortmund. Retrieved 2007-10-28.
- ^ Frubber facial expressions
- ^ Nexi facial expressions
- ^ "Kismet: Robot at MIT's AI Lab Interacts With Humans". Sam Ogden. Retrieved 2007-10-28.
- ^ (Park et al. 2005) Synthetic Personality in Robots and its Effect on Human-Robot Relationship
- ^ National Public Radio: Robot Receptionist Dishes Directions and Attitude
- ^ New Scientist: A good robot has personality but not looks
- ^ Ugobe: Introducing Pleo[dead link]
- ^ NOVA conversation with Professor Moravec, October, 1997. NOVA Online
- ^ Sandhana, Lakshmi (2002-09-05). A Theory of Evolution, for Robots. Wired Magazine. Retrieved 2007-10-28.
- ^ Experimental Evolution In Robots Probes The Emergence Of Biological Communication. Science Daily. 2007-02-24. Retrieved 2007-10-28.
- ^ Žlajpah, Leon (2008-12-15). "Simulation in robotics". Mathematics and Computers in Simulation. 79 (4): 879–897. doi:10.1016/j.matcom.2008.02.017.
- ^ The Latest Technology Research News: Evolution trains robot teams
- ^ Education at American Museum of Natural History
- ^ Ford, Martin R. (2009), The Lights in the Tunnel: Automation, Accelerating Technology and the Economy of the Future, Acculant Publishing, ISBN 978-1448659814.
Bibliography
- K. S. Fu & R.C. Gonzalez & C.S.G. Lee, Robotics: Control, Sensing, Vision, and Intelligence (CAD/CAM, robotics, and computer vision)
- C.S.G. Lee & R.C. Gonzalez & K.S. Fu, Tutorial on robotics
- “SP200 With Open Control Center. Robotic Prescription Dispensing System”, accessed November 22, 2008.
- “McKesson Empowering HealthCare. Robot RX”, accessed November 22, 2008.
- “Aethon. You Deliver the Care. TUG Delivers the Rest”, accessed November 22, 2008.[dead link]
- Marco Ceccarelli, "Fundamentals of Mechanics of Robotic Manipulators"
Further reading
- Journal of Field Robotics
- Robotics education website
- R. Andrew Russell (1990). Robot Tactile Sensing. New York: Prentice Hall. ISBN 0-13-781592-1.