Surgical mask
Surgical mask | |
---|---|
![]() A surgical mask with hand-tied straps | |
Other names | Procedure mask, medical mask, isolation mask, laser mask, fluid-resistant masks, face mask |
A surgical mask, also known by other names such as a medical face mask or procedure mask, is a personal protective equipment used by healthcare professionals that serves as a mechanical barrier that interferes with direct airflow in and out of respiratory orifices (i.e. nose and mouth). This helps reduce airborne transmission of pathogens and other aerosolized contaminants between the wearer and nearby people via respiratory droplets ejected when sneezing, coughing, forceful expiration or unintentionally spitting when talking, etc. Surgical masks may be labeled as surgical, isolation, dental or medical procedure masks.[1]
Although the material of which surgical masks are made will filter out some viruses and bacteria by trapping the aerosol suspended in breathed air, they only provide partial protection from airborne diseases because of the typically loose fit between the mask edges and the wearer's face.[2][3][4] Surgical masks are distinct from filtering respirators, such as those made to the American N95 standard, which are more airtight and purposefully designed to protect against finer airborne particles.
Evidence from randomized controlled trials that surgical masks reduce infection from diseases such as influenza is weak.[5][6][7] Although a recent very large (over 300,000 people) study found some evidence that they reduced transmission in the community,[8] surgical masks can vary greatly in quality which may make these studies less useful.[3] The effect of surgical masks is partially attributed to filtering out some of aerosol particles that are how airborne diseases are transmitted. Surgical masks are highly variable[3] but the material of which they are made typically filter out more aerosol particles than do cloth masks but much less than does the material of which N95, FFP2 and similar masks, are made.[9] This combined with the poor fit suggests that surgical masks offer some protection to airborne diseases such as COVID-19 but less than do N95, FFP2 and similar masks.
There are standards for the materials masks are made from. For example, the European EN 14683 Type II standard requires the material of the mask to filter particles (mean diameter close to 3 micrometres) containing the bacterium Staphylococcus aureus.[10][11] The bacterial filtration efficiency of the mask material is the fractional reduction in the number of colony-forming units (CFUs) when the aerosol is passed through the material. For a Type II mask under this standard, the material must filter enough of the aerosol particles containing the bacteria to achieve a CFU reduction of at least 98%.
ASTM International has an F2100 standard[12] with similar bacterial filtering standard to the European Type II standard but in addition uses a test aerosol of 0.1 micrometre particles. The Level 3 standard F2100 standard requires that these particles must be filtered out with at least 98% efficiency. Neither the European nor the ASTM standard tests performance as worn, they just test the material — the difference being the air leakage. This is different to personal protection equipment standards such as N95 and FFP, which do test performance as worn.
Surgical masks are made of a nonwoven fabric created using a melt blowing process. They came into use in the 1960s and largely replaced cloth facemasks in developed countries.[13] The colored (usually dark blue, green, or occasionally yellow) side of the mask (fluid-repellant layer) is to be worn outwards, and the white side (absorbent layer) inwards.[14][15][16]
In some East Asian countries, masks have often customarily been worn by people who are sick in order to avoid spreading it, to protect against air pollution or allergens, as a fashion statement, or to deter social interaction.[17][18][19] The use of surgical masks during the COVID-19 pandemic was a subject of debate,[20] as mask shortage was a central issue.[21][22]
Function
A surgical mask serves as a mechanical barrier that interferes with direct airflow in and out of respiratory orifices (i.e. nose and mouth). Most commonly used surgical masks are designed to only trap respiratory droplets, and therefore do not filter or block fine airborne particles that are smaller than the designed filtration ratings, which may be transmitted by coughs, sneezes, unintentional spitting during talking, or certain aerosol-generating medical procedures (e.g. bronchoscopy, laryngoscopy or dental procedures). Surgical masks also cannot provide complete protection from germs and other contaminants because of the often loose fit between the mask edges and the wearer's face,[25] especially when the mask is worn outright incorrectly (e.g. low with the nose and/or mouth exposed).
A surgical mask is a disposable device that creates a physical barrier between the respiratory tract openings (nose and mouth) of the wearer and potentially pathogenic contaminants in the immediate environment. If worn properly, surgical masks are meant to help block out most (if not all) large-particle droplets, splashes, sprays, or splatter that may contain viruses and bacteria, keeping them from entering the wearer's nose and mouth.,[25] and conversely are also effective barriers for retaining large droplets released from the wearer's the mouth and nose.[23] Surgical masks help reduce exposure of the wearer's saliva and respiratory secretions to others[25] that could otherwise travel up to 7.9 metres (26 ft).[26] Surgical mask also remind wearers not to touch their mouth or nose, which could otherwise transfer viruses and bacteria after having touched a contaminated surface.[24]
A surgical mask is not to be confused with a respirator (which is specifically rated for sub-micron particles) and is not certified as such. Surgical masks are not designed to protect the wearer from inhaling airborne bacteria or virus particles and are less effective than respirators, which are designed for this purpose.[23] Collection efficiency of surgical mask filters can range from less than 10% to nearly 90% for different manufacturers’ masks when measured using the test parameters for NIOSH certification. However, a study found that even for surgical masks with "good" filters, 80–100% of subjects failed an OSHA-accepted qualitative fit test, and a quantitative test showed 12–25% leakage.[27]
Modern surgical masks are made from paper or other non-woven material and should be discarded after each use.[28]
Physical form
Parameter | Typical unit |
---|---|
Pressure differential, ∆P | cm of H2O / cm2 |
Filtration and exposure | % |
Liquid penetration resistance | mbar |
Air permeability | ml/s⋅cm2 at 100 Pa |
Water vapor permeability | g/24 hr⋅cm2 |
Water repellency | grade |
The design of the surgical masks depends on the intended usages. Usually, the masks are rectangular-shaped with pleats to allow the wearer to expand and curve the mask so it can better cover all the area from the nose to around the chin. The outward-facing side of the mask are typically colored (usually blue, green or yellow) and made thicker, tougher and water-impermeable. The inner layers of the mask are made of three-ply (three layers) melt-blown polymer (most commonly polypropylene) placed between non-woven fabric.[29] The melt-blown material acts as the filter that stops microbes from penetrating and exiting the mask.[29] Some masks have an attached thin polyethylene faceshield (known as "splash shield") to provide additional spray protection over the eye area.
A different type of masks, known as "duckbill" masks, uses a trapezoid pouch-like design that has significantly shortened side edges — sometimes none at all — to minimize loose gaps that pathogens can leak past. These masks are typically made to the N95/P2 standards, and are commonly used for clinical situations that demand fine particulates protection, such as tuberculosis.
Small strips of foam or thickened fabric are often sewn along the top edge of the mask to help better seal away exhaled water vapors (which can fog up eyewears and faceshields) and soak up excess perspiration dripping from above. Small bendable metal strips are frequently added to the top edge to better fit over the nasal bridge. Occasionally adhesive tapes can also be added to secure the seal and prevent the mask from slipping up and down.
The masks are typically fastened to the head with straps or elastic bands that are attached to the mask's four corners.[30] Straps come in four free-hanging ribbons that are manually tied in two pairs horizontally around the back of the head, and are most frequently used in surgical operations due to the ability to customize the strap length and tension comfortably to the wearer's face shape and head movements. Elastic bands come in a pair of loops that can either be horizontally or vertically attached. Horizontal loops go around the head like tied straps, designed to exert tension on the top and bottom edges of the mask for firmer contact seal, and are usually seen on duckbill masks; while vertical loops hook around the ears with less tension (due to the weaker rigidity of the elastocartilaginous auricles compared to the bony skull) and thus less firmly secured to the face, but are more popular in non-procedural usages due to the ease of putting on and taking off.
Filter material in the middle layer may be made of microfibers with an electrostatic charge; that is, the fibers are electrets. An electret filter increases the chances that smaller particles will veer and hit a fiber, rather than going straight through (electrostatic capture).[31][32][33][34][better source needed][medical citation needed] While there is some development work on making electret filtering materials that can stand being washed and reused,[35] current commercially produced electret filters are ruined by many forms of disinfection, including washing with soap and water or alcohol, which destroys the electric charge.[36] During the COVID-19 pandemic, public health authorities issued guidelines on how to save, disinfect and reuse electret-filter masks without damaging the filtration efficiency.[37][36] Standard disposible surgical masks are not designed to be washed.
Physical properties and quality
Performance of surgical masks is evaluated based on such parameters as filtration (mask capture of exhaled aerosols), exposure (transfer of aerosols from outside), mask airflow resistance (pressure difference during breathing, ΔP, also known as breathability),[38] liquid penetration resistance, air and water vapor permeability, water repellency (for outer and inner surfaces).[39]
Filtration and exposure is typically measured in bacterial filtration efficiency (BFE) using particles of size 3.0 μm. Particulate filtration efficiency (PFE) using particles of size 0.3 μm is only measured in China.[40]
History
Face masks for use in surgery were developed in Europe by several physicians, including Jan Mikulicz-Radecki at the University of Breslau and Paul Berger in Paris, in the late nineteenth century, as a result of increasing awareness of germ theory and the importance of antiseptic procedures in medicine.[41] In response to a pneumonic plague in Manchuria and Mongolia in 1910, Chinese-Malaysian epidemiologist Dr. Wu Lien-teh greatly improved on the designs he had seen in Europe to develop a face mask of layers of gauze and cotton that would protect both the wearer and others.
Modern surgical masks began to be used in the 1960s. Their adoption caused cloth facemasks, which had been used since the late 19th century, to completely fall out of use in the developed world.[42][43] However, cloth masks and surgical masks both continued to be used in developing countries.[44]
COVID-19 pandemic
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c4/Coronavirus_COVID-19_face_mask_in_supermarket.jpg/220px-Coronavirus_COVID-19_face_mask_in_supermarket.jpg)
As the pandemic raged on, healthcare workers were required to continue wearing surgical masks for 12 or more hours a day. This caused the ear loops of the masks to chafe the back of their ears. Ear savers, plastic straps and hooks that go around wearer's heads, were invented to move the ear loops away from the wearer's ears. They could be made on demand by using 3D printing process.[45]
Use
Healthcare workers
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/db/CPMC_Surgery_%28412142792%29.jpg/220px-CPMC_Surgery_%28412142792%29.jpg)
A surgical mask is intended to be worn by health professionals during surgery and certain health care procedures[46] to catch microorganisms shed in liquid droplets and aerosols from the wearer's mouth and nose.[28] Evidence supports the effectiveness of surgical masks in reducing the risk of infection among other healthcare workers and in the community.[47] However, a Cochrane review found that there is no clear evidence that disposable face masks worn by members of the surgical team would reduce the risk of wound infections after clean surgical procedures.[7]
Healthcare workers are trained in how to put on, handle, remove, and dispose of surgical masks. For healthcare workers, safety guidelines recommend the wearing of a face-fit tested N95 or FFP3 respirator mask instead of a surgical mask in the vicinity of pandemic-flu patients, to reduce the exposure of the wearer to potentially infectious aerosols and airborne liquid droplets.[48][49][50]
General public
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b1/Childfacemask101.jpeg/220px-Childfacemask101.jpeg)
![People on a subway wearing face masks.](http://upload.wikimedia.org/wikipedia/commons/thumb/6/66/Swine_Flu_Masked_Train_Passengers_in_Mexico_City.jpg/220px-Swine_Flu_Masked_Train_Passengers_in_Mexico_City.jpg)
In community and home settings, the use of facemasks and respirators generally are not recommended, with other measures preferred such as avoiding close contact, maintaining good hand hygiene,[28] and wearing cloth face coverings.[52]
In Japan and Taiwan, surgical masks have commonly been worn in winter months during the flu season by those who have respiratory illnesses as a courtesy intended to prevent viral transmission.[17][53][54] Surgical masks provide some protection against the spread of diseases, and improvised masks provide about half as much protection.[55] People in Japan as well as Korea and China may also wear masks in any season because of air pollution or allergies. Some younger Japanese people wear masks and audio headsets to signal a desire to avoid interaction. It has been suggested that mask-wearing as a custom appeared in East Asia rather than other parts of the world also facing pollution and disease due to the historical influence of Traditional Chinese Medicine and its ideas about air and wind.[17]
More recently, due to the rising issue of smog in South and Southeast Asia, surgical masks and air filtering face masks are now frequently used in major cities in India, Nepal and Thailand when air quality deteriorates to toxic levels.[56][57][58] Additionally, face masks are used in Indonesia, Malaysia and Singapore during the Southeast Asian haze season.[59][60] Air filtering surgical-style masks are quite popular across Asia and as a result, many companies have released masks that not only prevent the breathing in of airborne dust particles but are also fashionable.[61][62] In Japan, some use masks as fashion statements, at times as a result of influence from K-pop stars.[18][19]
Surgical masks may also be worn to conceal identity. In the United States banks, convenience stores, etc. have banned their use as a result of criminals repeatedly doing so, but allowed facemasks due to the COVID-19 pandemic.[63] In the 2019–20 Hong Kong protests, some protestors wore surgical masks amongst other types of mask to avoid recognition, and the government tried to ban such use.[64]
Research and development
Researchers are developing face-masks which may help reduce viral spread better than existing ones and/or have possibly useful properties such as biodegradability or better breathability.[65][66][67][68][69][70][71] Some are exploring whether attachments could be added to existing face-masks to make them more effective[70] such as due to virus-deactivating fabrics or impregnations.[70][69] The COVID-19 pandemic increased efforts to develop such masks.[70]
There also is an experimental face mask with an embedded biosensor that can detect a pathogenic signature (such as one of SARS-CoV-2)[72] and face masks that glow under ultraviolet light if they contain SARS-CoV-2 when the filter is taken out and sprayed with a fluorescent dye that contains antibodies from ostrich eggs.[73]
Other research investigated environmental pollution associated with face mask waste management[74][75][76] and weak spots of masks with product designs of the widely applied FFP standards, in particular variants with exhalation valves.[77]
Regulation
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/26/A_bag_of_face_masks_made_by_BYD%2C_2020-04-26.jpg/220px-A_bag_of_face_masks_made_by_BYD%2C_2020-04-26.jpg)
In the United States, surgical masks are cleared for marketing by the U.S. Food and Drug Administration. In the European Economic Area (EEA), surgical masks have to be certified through the CE marking process in order to be commercialized. CE marking of surgical masks involves the respect of many obligations indicated in the Medical Device Regulation (Council Regulation 2017/745 of 5 April 2017 concerning medical devices, OJ No L 117/1 of 2017-05-05).
Surgical masks for use in the US and the EEA conform to ASTM F2100[12] and EN 14683[10] respectively. In both standards, a mask must have a Bacterial Filtration Efficiency (BFE) of more than 95%, for an aerosol of particles of size approximately 3.0 μm.[78]
In China, two types of masks are common: surgical masks that conform to YY 0469 standard (BFE ≥ 95%, PFE ≥ 30%, splash resistance) and single-use medical masks that conform to YY/T 0969 standard (BFE ≥ 95%).[40][79] Daily protective masks conforming to GB/T 32610 standard[80] is yet another type of masks that can have similar appearance to surgical masks.
See also
References
- ^ "N95 Respirators and Surgical Masks (Face Masks)". FDA. Retrieved 12 April 2020.
- ^ Sommerstein R, Fux CA, Vuichard-Gysin D, Abbas M, Marschall J, Balmelli C, et al. (July 2020). "Risk of SARS-CoV-2 transmission by aerosols, the rational use of masks, and protection of healthcare workers from COVID-19". Antimicrobial Resistance and Infection Control. 9 (1): 100. doi:10.1186/s13756-020-00763-0. PMC 7336106. PMID 32631450.
{{cite journal}}
: CS1 maint: unflagged free DOI (link) - ^ a b c Oberg T, Brosseau LM (May 2008). "Surgical mask filter and fit performance". American Journal of Infection Control. 36 (4): 276–282. doi:10.1016/j.ajic.2007.07.008. PMC 7115281. PMID 18455048.
- ^ Peeples L (October 2020). "Face masks: what the data say". Nature. 586 (7828): 186–189. Bibcode:2020Natur.586..186P. doi:10.1038/d41586-020-02801-8. PMID 33024333. S2CID 222183103.
- ^ Xiao J, Shiu EY, Gao H, Wong JY, Fong MW, Ryu S, Cowling BJ (May 2020). "Nonpharmaceutical Measures for Pandemic Influenza in Nonhealthcare Settings-Personal Protective and Environmental Measures". Emerging Infectious Diseases. 26 (5): 967–975. doi:10.3201/eid2605.190994. PMC 7181938. PMID 32027586.
- ^ Long Y, Hu T, Liu L, Chen R, Guo Q, Yang L, et al. (May 2020). "Effectiveness of N95 respirators versus surgical masks against influenza: A systematic review and meta-analysis". Journal of Evidence-Based Medicine. 13 (2): 93–101. doi:10.1111/jebm.12381. PMC 7228345. PMID 32167245.
- ^ a b Vincent M, Edwards P (April 2016). "Disposable surgical face masks for preventing surgical wound infection in clean surgery". The Cochrane Database of Systematic Reviews. 2016 (4): CD002929. doi:10.1002/14651858.CD002929.pub3. PMC 7138271. PMID 27115326.
- ^ Abaluck J, Kwong LH, Styczynski A, Haque A, Kabir MA, Bates-Jefferys E, et al. (January 2022). "Impact of community masking on COVID-19: A cluster-randomized trial in Bangladesh". Science. 375 (6577): eabi9069. doi:10.1126/science.abi9069. PMC 9036942. PMID 34855513. S2CID 245933929.
- ^ Zangmeister CD, Radney JG, Vicenzi EP, Weaver JL (July 2020). "Filtration Efficiencies of Nanoscale Aerosol by Cloth Mask Materials Used to Slow the Spread of SARS-CoV-2". ACS Nano. 14 (7): 9188–9200. doi:10.1021/acsnano.0c05025. PMC 7341689. PMID 32584542.
- ^ a b "European Standards: Medical face masks. Requirements and test methods BS EN 14683:2019".
- ^ "Medical face masks - Requirements and test methods EN 14683:2019+AC:2019" (PDF).
- ^ a b "Standard Specification for Performance of Materials Used in Medical Face Masks". www.astm.org. Retrieved 2021-12-26.
- ^ Strasser BJ, Schlich T (July 2020). "A history of the medical mask and the rise of throwaway culture". Lancet. 396 (10243). The Lancet: 19–20. doi:10.1016/S0140-6736(20)31207-1. PMC 7255306. PMID 32450110.
- ^ Chua MH, Cheng W, Goh SS, Kong J, Li B, Lim JY, et al. (2020). "Face Masks in the New COVID-19 Normal: Materials, Testing, and Perspectives". Research. 2020: 7286735. Bibcode:2020Resea202086735C. doi:10.34133/2020/7286735. PMC 7429109. PMID 32832908.
- ^ Min J (1 June 2020). "Which Way Round Should a Surgical Face Mask Go?". SmartAirFilters.com. Retrieved 8 October 2020.
- ^ Min J (1 June 2020). "Does Wearing Surgical Masks With the Wrong Side Out Affect Their Ability to Capture Viruses?". SmartAirFilters.com. Retrieved 8 October 2020.
- ^ a b c Yang J (19 November 2014). "A quick history of why Asians wear surgical masks in public". Quartz. Retrieved 28 March 2020.
- ^ a b "How surgical masks became a fashion statement". Dazed. 24 December 2015. Retrieved 28 March 2020.
- ^ a b "How K-Pop Revived Black Sickness Masks In Japan". Kotaku Australia. February 7, 2019.
- ^ Ting V (4 April 2020). "To mask or not to mask: WHO makes U-turn while US, Singapore abandon pandemic advice and tell citizens to start wearing masks". South China Morning Post.
- ^ "Not Enough Face Masks Are Made In America To Deal With Coronavirus". NPR.org. 5 March 2020. Retrieved 10 April 2020.
- ^ "Chinese mask makers use loopholes to speed up regulatory approval". Financial Times. 1 April 2020. Retrieved 10 April 2020.
- ^ a b c "Respiratory Protection Against Airborne Infectious Agents for Health Care Workers: Do surgical masks protect workers?" (OSH Answers Fact Sheets). Canadian Centre for Occupational Health and Safety. 28 February 2017. Retrieved 28 February 2017.
- ^ a b Tang JW, Nicolle AD, Pantelic J, Jiang M, Sekhr C, Cheong DK, Tham KW (22 June 2011). "Qualitative real-time schlieren and shadowgraph imaging of human exhaled airflows: an aid to aerosol infection control". PLOS ONE. 6 (6): e21392. Bibcode:2011PLoSO...621392T. doi:10.1371/journal.pone.0021392. PMC 3120871. PMID 21731730.
- ^ a b c "N95 Respirators and Surgical Masks (Face Masks)". U.S. Food and Drug Administration. 11 March 2020. Retrieved 28 March 2020.
This article incorporates text from this source, which is in the public domain.
- ^ Padilla R, Zarracina J (3 April 2020). "Coronavirus might spread much farther than 6 feet in the air. CDC says wear a mask in public". USATODAY.com. Retrieved 4 April 2020.
- ^ Brosseau L, Ann RB (14 October 2009). "N95 Respirators and Surgical Masks". NIOSH Science Blog. Retrieved 28 March 2020.
This article incorporates text from this source, which is in the public domain.
- ^ a b c "Interim Recommendations for Facemask and Respirator Use to Reduce Novel Influenza A (H1N1) Virus Transmission". Centers for Disease Control and Prevention. 27 May 2009.
Unless otherwise specified, the term "facemasks" refers to disposable facemasks cleared by the U.S. Food and Drug Administration (FDA) for use as medical devices. This includes facemasks labeled as surgical, dental, medical procedure, isolation, or laser masks... Facemasks should be used once and then thrown away in the trash.
- ^ a b "How Surgical Masks are Made, Tested and Used". ThomasNet. Retrieved 5 April 2020.
- ^ Reusability of Facemasks During an Influenza Pandemic: Facing the Flu. 17 March 2006. doi:10.17226/11637. ISBN 978-0-309-10182-0. Retrieved 5 April 2020.
{{cite book}}
:|website=
ignored (help) - ^ "Electrostatic Capture stops a virus smaller than fabric fibers in surgical masks". maskenplanet.de. 28 January 2022.
- ^ Wei NK (6 May 2019). "What is PM0.3 and Why Is It Important?". Smart Air Filters.
- ^ US 5496507, "Method Of Charging Electret Filter Media"
- ^ "PROPERTIES OF DIFFERENT TYPES OF MASKS" (PDF). Government of New South Wales Clinical Excellence Commission. February 2020.
- ^ Jung J (17 March 2020). "KAIST Researchers Develop Highly Reusable Mask Filter". KoreaTechToday.
- ^ a b "Recommended Guidance for Extended Use and Limited Reuse of N95 Filtering Facepiece Respirators in Healthcare Settings". cdc.gov. NIOSH Workplace Safety and Health Topic. CDC. 27 March 2020.
- ^ "Coronavirus Disease 2019 (COVID-19)". Centers for Disease Control and Prevention. 11 February 2020.
- ^ Skaria S, Smaldone G (2014). "Respiratory Source Control Using Surgical Masks With Nanofiber Media". Annals of Occupational Hygiene. 6 (58): 771–781.
- ^ Li Y, Wong T, Chung J, Guo YP, Hu JY, Guan YT, et al. (December 2006). "In vivo protective performance of N95 respirator and surgical facemask". American Journal of Industrial Medicine. 49 (12): 1056–1065. doi:10.1002/ajim.20395. PMID 17096360.
- ^ a b 中华人民共和国医药行业标准:YY 0469–2011 医用外科口罩(Surgical mask) (in Chinese)
- ^ Strasser BJ, Schlich T (July 2020). "A history of the medical mask and the rise of throwaway culture". Lancet. 396 (10243): 19–20. doi:10.1016/S0140-6736(20)31207-1. PMC 7255306. PMID 32450110.
- ^ Reusability of Facemasks During an Influenza Pandemic: Facing the Flu. Washington, D.C.: National Academies Press. 24 July 2006. pp. 6, 36–38. doi:10.17226/11637. ISBN 978-0-309-10182-0.
- ^ Chughtai AA, Seale H, MacIntyre CR (19 June 2013). "Use of cloth masks in the practice of infection control – evidence and policy gaps". International Journal of Infection Control. 9 (3). doi:10.3396/IJIC.v9i3.020.13.
- ^ MacIntyre CR, Chughtai AA (April 2015). "Facemasks for the prevention of infection in healthcare and community settings". BMJ. 350 (apr09 1): h694. doi:10.1136/bmj.h694. PMID 25858901. S2CID 46366687.
- ^ Cavalcanti G, Cocciole C, Cole C, Forgues A, Jaqua V, Jones-Davis D, Merlo S (2021). Design, Make, Protect: A report on the Open Source Maker and Manufacturer Response to the COVID-19 PPE Crisis (PDF). Open Source Medical Supplies & Nation of Makers. pp. 22, 46. Retrieved 17 June 2021.
- ^ Procedure mask. nursingcenter.com
- ^ MacIntyre CR, Chughtai AA (April 2015). "Facemasks for the prevention of infection in healthcare and community settings". BMJ. 350: h694. doi:10.1136/bmj.h694. PMID 25858901. S2CID 46366687.
- ^ "Interim guidance on planning for the use of surgical masks and respirators in health care settings during an influenza pandemic" (PDF). U.S. Department of Health & Human Services. October 2006. Archived from the original (PDF) on 4 March 2016.
- ^ "Working with highly pathogenic avian influenza virus". UK Health and Safety Executive. Retrieved 2 August 2014.
- ^ "N95 Factsheet". Centers for Disease Control and Prevention. Archived from the original on 11 November 2009.
- ^ FDA clears first single-use face mask for children; URL accessed 18 October 2020.
- ^ CDC (11 February 2020). "Coronavirus Disease 2019 (COVID-19)". Centers for Disease Control and Prevention. Retrieved 5 July 2020.
- ^ Juliet Hindell (30 May 1999). "Japan's war on germs and smells". BBC Online.
- ^ "CJCU Student Handbook" (PDF). 2016. Retrieved 4 April 2020.
In Taiwan, it is considered courteous to wear a face mask if you have a cold and cough and plan to be in close proximity with others
- ^ Davies A, Thompson KA, Giri K, Kafatos G, Walker J, Bennett A (August 2013). "Testing the efficacy of homemade masks: would they protect in an influenza pandemic?". Disaster Medicine and Public Health Preparedness. 7 (4): 413–418. doi:10.1017/dmp.2013.43. PMC 7108646. PMID 24229526.
- ^ "Why are face masks selling out in Bangkok?". BBC News. Retrieved 28 March 2020.
- ^ Thomas M, Punit IS (8 November 2016). "Delhi's rich and beautiful are breathing clean air stylishly, with help from the Nevada desert". Quartz India. Retrieved 28 March 2020.
- ^ "Keeping Kathmandu Out". kathmandupost.com. Retrieved 28 March 2020.
- ^ "How to choose the right mask to protect yourself from the haze". AsiaOne. Retrieved 28 March 2020.
- ^ Holliday K (20 June 2013). "Face Masks, Anyone? Singapore Struggles With Haze". www.cnbc.com. Retrieved 28 March 2020.
- ^ Delhi residents brave the smog in style
- ^ "New mask against air pollution offers six times more protection". South China Morning Post. December 1, 2016.
- ^ "Masks, Robberies and Negligent Security Lawsuits—a COVID Quandary for Banks". Law.com. 21 January 2021.
- ^ "Hong Kong protesters defy face mask ban — with humor". DW.COM.
- ^ Layt S (14 April 2020). "Queensland researchers hit sweet spot with new mask material". Brisbane Times. Retrieved 17 May 2020.
- ^ Technology (QUT), Queensland University of. "New mask material can remove virus-size nanoparticles". QUT. Retrieved 17 May 2020.
- ^ Khan J, Momin SA, Mariatti M, Vilay V, Todo M (November 2021). "Recent advancements in nonwoven bio-degradable facemasks to ameliorate the post-pandemic environmental impact". Materials Research Express. 8 (11): 112001. Bibcode:2021MRE.....8k2001K. doi:10.1088/2053-1591/ac35d0.
- ^ Leichman AK (28 January 2020). "New antiviral masks from Israel may help stop deadly coronavirus". Israel21c. Retrieved 17 May 2020.
- ^ a b Pollard ZA, Karod M, Goldfarb JL (September 2021). "Metal leaching from antimicrobial cloth face masks intended to slow the spread of COVID-19". Scientific Reports. 11 (1): 19216. Bibcode:2021NatSR..1119216P. doi:10.1038/s41598-021-98577-6. PMC 8479130. PMID 34584143.
- ^ a b c d Karlin S (12 May 2020). "Scientists are racing to design a face mask that can rip coronavirus apart". Fast Company. Retrieved 17 May 2020.
- ^ Vavra C (18 April 2020). "Self-sanitizing face mask project for COVID-19 research receives NSF grant". Control Engineering. Retrieved 17 May 2020.
- ^ Nguyen PQ, Soenksen LR, Donghia NM, Angenent-Mari NM, de Puig H, Huang A, et al. (November 2021). "Wearable materials with embedded synthetic biology sensors for biomolecule detection". Nature Biotechnology. 39 (11): 1366–1374. doi:10.1038/s41587-021-00950-3. PMID 34183860. S2CID 235673261.
- ^ "Japanese scientists develop glowing masks to detect coronavirus". Kyodo News+. Retrieved 16 January 2022.
- ^ Bowyer C, Roberts KP, Kolstoe S, Fletcher S (14 August 2020). "Coronavirus face masks: an environmental disaster that might last generations". The Conversation.
- ^ Chowdhury H, Chowdhury T, Sait SM (July 2021). "Estimating marine plastic pollution from COVID-19 face masks in coastal regions". Marine Pollution Bulletin. 168: 112419. doi:10.1016/j.marpolbul.2021.112419. PMC 8064874. PMID 33930644.
- ^ Aragaw TA (October 2020). "Surgical face masks as a potential source for microplastic pollution in the COVID-19 scenario". Marine Pollution Bulletin. 159: 111517. doi:10.1016/j.marpolbul.2020.111517. PMC 7381927. PMID 32763564.
- ^ Verma S, Dhanak M, Frankenfield J (September 2020). "Visualizing droplet dispersal for face shields and masks with exhalation valves". Physics of Fluids. 32 (9): 091701. arXiv:2008.00125. Bibcode:2020PhFl...32i1701V. doi:10.1063/5.0022968. PMC 7497716. PMID 32952381.
- ^ Robertson P (15 March 2020). "Comparison of Mask Standards, Ratings, and Filtration Effectiveness". Smart Air Filters.
- ^ 中华人民共和国医药行业标准:YY/T 0969–2013 一次性使用医用口罩(Single-use medical face mask) (in Chinese)
- ^ "GB/T 32610–2016 Technical specification of daily protective mask" (PDF).
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Filtering out confusion. Frequently Asked Questions about Respiratory Protection, National Institute for Occupational Safety and Health
- Juwarkar CS (September 2013). "Cleaning and sterilisation of anaesthetic equipment". Indian Journal of Anaesthesia. 57 (5): 541–550. doi:10.4103/0019-5049.120152. PMC 3821272. PMID 24249888.
{{cite journal}}
: CS1 maint: unflagged free DOI (link) - Coronavirus disease (COVID-19) advice for the public: When and how to use masks