Jump to content

NER Class F

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ilovejames5 (talk | contribs) at 14:18, 9 December 2022. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

NER Class F
LNER Class D22
Type and origin
Power typeSteam
DesignerNER Class R1
Build date1887-1891
Total produced37
Specifications
Configuration:
 • Whyte4-4-0
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.3 ft 7+14 in (1.099 m)
Driver dia.6 ft 8 in (2.03 m)
Fuel typecoal
Boiler4 ft 6 in (1.37 m) diameter
Boiler pressure160 psi (1.1 MPa)
Cylinderstwo inside
Cylinder size18 in × 24 in (460 mm × 610 mm)
Valve gearStephenson
Performance figures
Tractive effort13,210 lbf (58.8 kN)
Career
OperatorsNorth Eastern Railway
London and North Eastern Railway
DispositionNone preserved

The NER Class F (LNER Class D22) was a class of 4-4-0 steam locomotives of the North Eastern Railway. It was designed by Thomas William Worsdell and introduced in 1887.

History

Class F (compound expansion) and Class F1 (simple expansion) 4-4-0s were developments of T.W. Worsdell's experimental Class D 2-4-0. The Class Ds were two-cylinder compounds of the von Borries type. However, the 2-4-0 wheel arrangement was found unsuitable and this led to the development of the Class F 4-4-0.[1]

Class Build date No. built
D 1886, 1888 2
F 1887 10
F1 1887 10
F 1890-1891 15
Total 37

Between 1896 and 1911 all the Class D, F and F1 locomotives were rebuilt into one 4-4-0 class with 18in x 24in simple expansion cylinders, piston valves, and Stephenson valve gear. They had been built with slide valves and Joy valve gear. The combined class was designated "Class F" from 1914. Superheaters were fitted between 1913 and 1920.

Dimensions

The information box (above right) shows the dimensions after 1911. Before this, dimensions varied:

  • Boiler pressure: 140, 160 or 175 psi
  • Cylinders (compound): one 18 in × 24 in (460 mm × 610 mm) and one 26 in × 24 in (660 mm × 610 mm)
  • Cylinders (simple): two 18 in × 24 in (460 mm × 610 mm)

Use

They were initially used for express passenger services. Between 1892 and 1894 they were displaced by newer locomotives and relegated to secondary duties. By the time of the 1923 Grouping, they had been further relegated and were typically used for branch line stopping trains.

Withdrawal

They were withdrawn between 1927 and 1935 and none were preserved.

References

  1. ^ "The T.W.Worsdell Class D22 (NER Class F) 4-4-0 Locomotives". LNER Encyclopedia.