Jump to content

Extended Unix Code

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Comp.arch (talk | contribs) at 13:41, 1 September 2023 (→EUC-KR: Stats.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Extended Unix Code (EUC) is a multibyte character encoding system used primarily for Japanese, Korean, and simplified Chinese.

The most commonly used EUC codes are variable-length encodings with a character belonging to an ISO/IEC 646 compliant coded character set (such as ASCII) taking one byte, and a character belonging to a 94x94 coded character set (such as GB 2312) represented in two bytes. The EUC-CN form of GB 2312 and EUC-KR are examples of such two-byte EUC codes. EUC-JP includes characters represented by up to three bytes, including an initial shift code, whereas a single character in EUC-TW can take up to four bytes.

Modern applications are more likely to use UTF-8, which supports all of the glyphs of the EUC codes, and more, and is generally more portable with fewer vendor deviations and errors. EUC is however still very popular, especially EUC-KR for South Korea.

Encoding structure

Relationship between packed EUC and other 8-bit ISO 2022 profiles

The structure of EUC is based on the ISO/IEC 2022 standard, which specifies a system of graphical character sets that can be represented with a sequence of the 94 7-bit bytes 0x21–7E, or alternatively 0xA1–FE if an eighth bit is available. This allows for sets of 94 graphical characters, or 8836 (942) characters, or 830584 (943) characters. Although initially 0x20 and 0x7F were always the space and delete character and 0xA0 and 0xFF were unused, later editions of ISO/IEC 2022 allowed the use of the bytes 0xA0 and 0xFF (or 0x20 and 0x7F) within sets under certain circumstances, allowing the inclusion of 96-character sets. The ranges 0x00–1F and 0x80–9F are used for C0 and C1 control codes.

EUC is a family of 8-bit profiles of ISO/IEC 2022, as opposed to 7-bit profiles such as ISO-2022-JP. As such, only ISO 2022 compliant character sets can have EUC forms. Up to four coded character sets (referred to as G0, G1, G2, and G3 or as code sets 0, 1, 2, and 3) can be represented with the EUC scheme. The G0 set is set to an ISO/IEC 646 compliant coded character set such as US-ASCII, ISO 646:KR (KS X 1003) or ISO 646:JP (the lower half of JIS X 0201) and invoked over GL (i.e. 0x21–0x7E, with the most significant bit cleared).[1] If US-ASCII is used, this makes the code an extended ASCII encoding; the most common deviation from US-ASCII is that 0x5C (backslash in US-ASCII) is often used to represent a Yen sign in EUC-JP (see below) and a won sign in EUC-KR.

The other code sets are invoked over GR (i.e. with the most significant bit set). Hence, to get the EUC form of a character, the most significant bit of each coding byte is set (equivalent to adding 128 to each 7-bit coding byte, or adding 160 to each number in the kuten code); this allows the software to easily distinguish whether a particular byte in a character string belongs to the ISO 646 code or the extended code. Characters in code sets 2 and 3 are prefixed with the control codes SS2 (0x8E) and SS3 (0x8F) respectively, and invoked over GR. Besides the initial shift code, any byte outside of the range 0xA0–0xFF appearing in a character from code sets 1 through 3 is not a valid EUC code.[1]

The EUC code itself does not make use of the announcement and designation sequences from ISO 2022.[1] However, the code specification is equivalent to the following sequence of four ISO 2022 announcement sequences, with meanings breaking down as follows.[1]

Individual sequence Hexadecimal Feature of EUC denoted
ESC SP C 1B 20 43 ISO-8 (8-bit, G0 in GL, G1 in GR)
ESC SP Z 1B 20 5A G2 accessed using SS2
ESC SP [ 1B 20 5B G3 accessed using SS3
ESC SP \ 1B 20 5C Single-shifts invoke over GR

Fixed-length format

Layout of the fixed-length format for Japanese

The ISO-2022-based variable-length encoding described above is sometimes referred to as the EUC packed format, which is the encoding format usually labeled as EUC. However, internal processing of EUC data may make use of a fixed-length transformation format called the EUC complete two-byte format. This represents:[2]

  • Code set 0 as two bytes in the range 0x21–0x7E (except that the first may be 0x00).
  • Code set 1 as two bytes in the range 0xA0–0xFF (except that the first may be 0x80).
  • Code set 2 as a byte in the range 0x21–0x7E (or 0x00) followed by a byte in the range 0xA0–0xFF.
  • Code set 3 as a byte in the range 0xA0–0xFF (or 0x80) followed by a byte in the range 0x21–0x7E.

Initial bytes of 0x00 and 0x80 are used in cases where the code set uses only one byte. There is also a four-byte fixed-length format.[2] These fixed-length encoding formats are suited to internal processing and are not usually encountered in interchange.

EUC-JP is registered with the IANA in both formats, the packed format as "EUC-JP" or "csEUCPkdFmtJapanese" and the fixed width format as "csEUCFixWidJapanese".[3] Only the packed format is included in the WHATWG Encoding Standard used by HTML5.[4]

EUC-CN

EUC-CN
MIME / IANAGB2312
Alias(es)csGB2312, CN-GB[5]
Language(s)Simplified Chinese, English, Russian
StandardGB 2312 (1980)
ClassificationExtended ASCII, variable-length encoding, CJK encoding, EUC
ExtendsUS-ASCII
Extensions748, GBK, GB 18030, x-mac-chinesesimp
Transforms / EncodesGB 2312
Succeeded byGBK, GB 18030

EUC-CN[6] is the usual encoded form of the GB 2312 standard for simplified Chinese characters. Unlike the case of Japanese JIS X 0208 and ISO-2022-JP, GB 2312 is not normally used in a 7-bit ISO 2022 code version,[a] although a variant form called HZ (which delimits GB 2312 text with ASCII sequences) was sometimes used on USENET.

An ASCII character is represented in its usual encoding. A character from GB 2312 is represented by two bytes, both from the range 0xA1–0xFE.

748 code

An encoding related to EUC-CN is the "748" code used in the WITS typesetting system developed by Beijing's Founder Technology (now obsoleted by its newer FITS typesetting system). The 748 code contains all of GB 2312, but is not ISO 2022–compliant and therefore not a true EUC code. (It uses an 8-bit lead byte but distinguishes between a second byte with its most significant bit set and one with its most significant bit cleared, and is, therefore, more similar in structure to Big5 and other non–ISO 2022–compliant DBCS encoding systems.) The non-GB2312 portion of the 748 code contains traditional and Hong Kong characters and other glyphs used in newspaper typesetting.

IBM code pages 1380, 1381, 1382 and 1383

IBM code page 1381 (CCSID 1381) comprises the single-byte code page 1115 (CPGID 1115 as CCSID 1115) and the double-byte code page 1380 (CPGID 1380 as CCSID 1380),[7] which encodes GB 2312 the same way as EUC-CN, but deviates from the EUC structure by extending the lead byte range back to 0x8C, adding 31 IBM-selected characters in 0x8CE0 through 0x8CFE and adding 1880 user-defined characters with lead bytes 0x8D through 0xA0.[8]

IBM code page 1383 (CCSID 1383) comprises the single-byte code page 367 and the double-byte code page 1382 (CPGID 1382 as CCSID 1382),[9] which differs by conforming to the EUC structure, adding the 31 IBM-selected characters in 0xFEE0 through 0xFEFE instead, and including only 1360 user-defined characters, interspersed in the positions not used by GB 2312.[10] The alternative CCSID 5479[11] is used for the pure EUC-CN code page: it uses CCSID 9574 as its double-byte set, which uses CPGID 1382 but excludes the IBM-selected and user-defined characters.[12]

GBK and GB 18030

Main articles: GBK (character encoding) and GB 18030

GBK is an extension to GB 2312. It defines an extended form of the EUC-CN encoding capable of representing a larger array of CJK characters sourced largely from Unicode 1.1, including traditional Chinese characters and characters used only in Japanese. It is not, however, a true EUC code, because ASCII bytes may appear as trail bytes (and C1 bytes, not limited to the single shifts, may appear as lead or trail bytes), due to a larger encoding space being required.

Variants of GBK are implemented by Windows code page 936 (the Microsoft Windows code page for simplified Chinese), and by IBM's code page 1386.

The Unicode-based GB 18030 character encoding defines an extension of GBK capable of encoding the entirety of Unicode. However, Unicode encoded as GB 18030 is a variable-length encoding which may use up to four bytes per character, due to an even larger encoding space being required. Being an extension of GBK, it is a superset of EUC-CN but is not itself a true EUC code. Being a Unicode encoding, its repertoire is identical to that of other Unicode transformation formats such as UTF-8.

Mac OS Chinese Simplified

Other EUC-CN variants deviating from the EUC mechanism include the Mac OS Chinese Simplified script (known as Code page 10008 or x-mac-chinesesimp).[13] It uses the bytes 0x80, 0x81, 0x82, 0xA0, 0xFD, 0xFE, and 0xFF for the U with umlaut (ü), two special font metric characters, the non-breaking space, the copyright sign (©), the trademark sign (™) and the ellipsis (…) respectively.[6] This differs in what is regarded as a single-byte character versus the first byte of a two-byte character from both EUC (where, of those, 0xFD and 0xFE are defined as lead bytes) and GBK (where, of those, 0x81, 0x82, 0xFD and 0xFE are defined as lead bytes).

This use of 0xA0, 0xFD, 0xFE and 0xFF matches Apple's Shift_JIS variant.

Besides these changes to the lead byte range, the other distinctive feature of the double-byte portion of Mac OS Chinese Simplified is the inclusion of two extensions to the basic GB 2312-80 set in rows 6 and 8.[6] These are considered "standard extensions to GB 2312", neither of which is proprietary to Apple: the row 8 extension was taken from GB 6345.1,[6] both extensions are included by GB/T 12345 (the Traditional Chinese variant of GB 2312),[14] and both extensions are included by GB 18030 (the successor to GB 2312).[15]

EUC-JP

EUC-JP
MIME / IANAEUC-JP
Alias(es)Unixized JIS (UJIS), csEUCPkdFmtJapanese
Language(s)Japanese, English, Russian
ClassificationExtended ISO 646, variable-length encoding, CJK encoding, EUC
ExtendsUS-ASCII or ISO 646:JP
Transforms / EncodesJIS X 0208, JIS X 0212, JIS X 0201
Succeeded byEUC-JISx0213
EUC-JIS-2004
Alias(es)EUC-JISx0213
Language(s)Japanese, Ainu, English, Russian
StandardJIS X 0213
ClassificationExtended ASCII, variable-length encoding, CJK encoding, EUC
ExtendsUS-ASCII
Transforms / EncodesJIS X 0213, JIS X 0201 (Kana)
Preceded byEUC-JP

EUC-JP is a variable-length encoding used to represent the elements of three Japanese character set standards, namely JIS X 0208, JIS X 0212, and JIS X 0201. Other names for this encoding include Unixized JIS (or UJIS) and AT&T JIS.[2] 0.2% of all web pages use EUC-JP since September 2022,[16] while 4.7% of websites in Japanese use this encoding[17] (less used than Shift JIS, or UTF-8). It is called Code page 954 by IBM.[18][19] Microsoft has two code page numbers for this encoding (51932 and 20932).

This encoding scheme allows the easy mixing of 7-bit ASCII and 8-bit Japanese without the need for the escape characters employed by ISO-2022-JP, which is based on the same character set standards, and without ASCII bytes appearing as trail bytes (unlike Shift JIS).

A related and partially compatible encoding, called EUC-JISx0213 or EUC-JIS-2004, encodes JIS X 0201 and JIS X 0213[20] (similarly to Shift_JISx0213, its Shift_JIS-based counterpart).

Compared to EUC-CN or EUC-KR, EUC-JP did not become as widely adopted on PC and Macintosh systems in Japan, which used Shift JIS or its extensions (Windows code page 932 on Microsoft Windows, and MacJapanese on classic Mac OS), although it became heavily used by Unix or Unix-like operating systems (except for HP-UX). Therefore, whether Japanese websites use EUC-JP or Shift_JIS often depends on what OS the author uses.

Characters are encoded as follows:

  • As an EUC/ISO 2022 compliant encoding, the C0 control characters, space, and DEL are represented as in ASCII.
  • A graphical character from ASCII (code set 0) is represented as its usual one-byte representation, in the range 0x21 – 0x7E. While some variants of EUC-JP encode the lower half of JIS X 0201 here, most encode ASCII,[21] including the W3C/WHATWG Encoding standard used by HTML5,[22] and so does EUC-JIS-2004.[20] While this means that 0x5C is typically mapped to Unicode as U+005C REVERSE SOLIDUS (the ASCII backslash), U+005C may be displayed as a Yen sign by certain Japanese-locale fonts, e.g. on Microsoft Windows, for compatibility with the lower half of JIS X 0201.[23][24]
  • A character from JIS X 0208 (code set 1) is represented by two bytes, both in the range 0xA1 – 0xFE. This differs from the ISO-2022-JP representation by having the high bit set. This code set may also contain vendor extensions in some EUC-JP variants. In EUC-JIS-2004, the first plane of JIS X 0213 is encoded here, which is effectively a superset of standard JIS X 0208.[20]
  • A character from the upper half of JIS X 0201 (half-width kana, code set 2) is represented by two bytes, the first being 0x8E, the second being the usual JIS X 0201 representation in the range 0xA1 – 0xDF. This set may contain IBM vendor extensions in some variants.
  • A character from JIS X 0212 (code set 3) is represented in EUC-JP by three bytes, the first being 0x8F, the following two being in the range 0xA1–0xFE, i.e. with the high bit set. In addition to standard JIS X 0212, code set 3 of some EUC-JP variants may also contain extensions in rows 83 and 84 to represent characters from IBM's Shift JIS extensions which lack standard JIS X 0212 mappings, which may be coded in either of two layouts, one defined by IBM themselves and one defined by the OSF.[25][26] In EUC-JIS-2004, the second plane of JIS X 0213 is encoded here,[20] which does not collide with the allocated rows in standard JIS X 0212.[27] Some implementations of EUC-JIS-2004, such as the one used by Python, allow both JIS X 0212 and JIS X 0213 plane 2 characters in this set.[27]

Vendor extensions to EUC-JP (from, for example, the Open Software Foundation, IBM or NEC) were often allocated within the individual code sets,[25][26] as opposed to using invalid EUC sequences (as in popular extensions of EUC-CN and EUC-KR).

However, some vendor-specific encodings are partially compatible with EUC-JP, due to encoding JIS X 0208 over GR, but do not follow the packed EUC structure. Often, these do not include use of the single shifts from EUC-JP, and are thus not straight extensions of EUC-JP, with the exception of Super DEC Kanji.

DEC Kanji

Digital Equipment Corporation defines two variants of EUC-JP only partly conforming to the EUC packed format, but also bearing some resemblance to the complete two-byte format. The overall format of the "DEC Kanji" encoding mostly corresponds to fixed-length (complete two-byte) EUC; however, code set 0 is not required to be left-padded with null bytes (similarly to the packed format).[28] JIS X 0208 is, as usual, used for code set 1; code set 2 (half-width katakana) is absent; code set 3 is encoded like the two-byte fixed width format (i.e. without a shift byte and with only the first high bit set), but used for two-byte user defined characters rather than being specified for JIS X 0212.[28] In the basic "DEC Kanji" encoding, only the first 31 rows of code set 3 are used for user-defined characters: rows 32 through 94 are reserved, similarly to the unused rows in code set 1.[29]

The "Super DEC Kanji" encoding accepts codes both from the "DEC Kanji" encoding and from packed-format EUC, for a total of five code-sets.[28] It also allows the entire user defined code set, and the unused rows at the ends of the JIS X 0208 and JIS X 0212 code sets (rows 85–94 and 78–94 respectively), to be used for user-defined characters.[29]

HP-16

Hewlett-Packard defines an encoding referred to as "HP-16". This accompanies their "HP-15" encoding, which is a variant of Shift JIS. HP-16 encodes JIS X 0208 using the same bytes as in EUC-JP, but does not use the single shift codes (thus omitting code sets 2 and 3), and adds three user-defined regions which do not follow the packed-format EUC structure:[28]

  • Lead bytes 0xA1–C2, trail bytes 0x21–7E
  • Lead bytes 0xC3–E3, trail bytes 0x21–3F
  • Lead bytes 0xC3–E1, trail bytes 0x40–64

IKIS

The IKIS (Interactive Kanji Information System) encoding used by Data General resembles EUC-JP without single shifts, i.e. with only code sets 0 and 1. Half-width katakana are instead included in row 8 of JIS X 0208 (colliding with the box-drawing characters added to the standard in 1983). JIS X 0208 rows 9 through 12 are used for user-defined characters.[28][29]

Adaptations of EUC-JP for EBCDIC

Main article: Japanese language in EBCDIC

KEIS (Kanji-processing Extended Information System) is an EBCDIC encoding used by Hitachi,[29] with double-byte characters (a DBCS-Host encoding) included using shifting sequences, making it a stateful encoding. Specifically, the sequence 0x0A 0x41 switches to single-byte mode and the sequence 0x0A 0x42 switches to double-byte mode.[b] However, JIS X 0208 characters are encoded using the same byte sequences used to encode them in EUC-JP. This results in duplicate encodings for the ideographic space—0x4040 per the DBCS-Host code structure, and 0xA1A1 as in EUC-JP. This differs from IBM's DBCS-Host encoding for Japanese, the layout of which builds on versions which predate JIS X 0208 altogether. The lead byte range is extended back to 0x59, out of which the lead bytes 0x81–A0 are designated for user-defined characters,[28] and the remainder are used for corporate-defined characters, including both kanji and non-kanji.[29]

JEF (Japanese-processing Extended Feature)[29] is an EBCDIC encoding used on Fujitsu FACOM mainframes, contrasting with FMR (a variant of Shift JIS) used on Fujitsu PCs. Like KEIS, JEF is a stateful encoding, switching to a double-byte DBCS-Host mode using shifting sequences (where 0x29 switches to single-byte mode and 0x28 switches to double-byte mode).[30] Also similarly to KEIS, JIS X 0208 codes are represented the same as in EUC-JP.[28] The lead byte range is extended back to 0x41, with 0x80–A0 designated for user definition; lead bytes 0x41–7F are assigned row numbers 101 through 163 for kuten purposes, although row 162 (lead byte 0x7E) is unused.[28][29] Rows 101 through 148 are used for extended kanji, while rows 149 through 163 are used for extended non-kanji.[29]

EUC-KR

"EUC-KR" redirects here. For the variant so named in HTML standards, see Unified Hangul Code.
EUC-KR
EUC-KR code structure
MIME / IANAEUC-KR
Alias(es)Wansung, IBM-970
Language(s)Korean, English, Russian
StandardKS X 2901 (KS C 5861)
ClassificationExtended ISO 646, variable-length encoding, CJK encoding, EUC
ExtendsUS-ASCII or ISO 646:KR
ExtensionsMac OS Korean, IBM-949, Unified Hangul Code (Windows-949)
Transforms / EncodesKS X 1001
Succeeded byUnified Hangul Code (web standards)

EUC-KR is a variable-length encoding to represent Korean text using two coded character sets, KS X 1001 (formerly KS C 5601)[31][32] and either ISO 646:KR (KS X 1003, formerly KS C 5636) or US-ASCII, depending on variant. KS X 2901 (formerly KS C 5861) stipulates the encoding and RFC 1557 dubbed it as EUC-KR.

A character drawn from KS X 1001 (G1, code set 1) is encoded as two bytes in GR (0xA1–0xFE) and a character from KS X 1003 or US-ASCII (G0, code set 0) takes one byte in GL (0x21–0x7E).

It is usually referred to as Wansung (Template:Lang-ko) in the Republic of Korea. IBM refers to the double-byte component as Code page 971,[33] and to EUC-KR with ASCII as Code page 970.[34][35][36] It is implemented as Code page 20949 ("Korean Wansung")[37][38] and Code page 51949 ("EUC Korean") by Microsoft.[37]

As of July 2023, 0.08% of all web pages globally use EUC-KR,[39] but 5.0% of South Korean web pages use EUC-KR,[40] Including extensions, it is the most widely used legacy character encoding in Korea on all three major platforms (macOS, other Unix-like OSes, and Windows), but its use has been very slowly shifting to UTF-8 as it gains popularity, especially on Linux and macOS.

As with most other encodings, UTF-8 is now preferred for new use, solving problems with consistency between platforms and vendors.

Unified Hangul Code

Main article: Unified Hangul Code

A common extension of EUC-KR is the Unified Hangul Code (Template:Lang-ko,[41] or Template:Lang-ko), which is the default Korean codepage on Microsoft Windows. It is given the code page number 949 by Microsoft, and 1261[42] or 1363[43] by IBM. IBM's code page 949 is a different, unrelated, EUC-KR extension.

Unified Hangul Code extends EUC-KR by using codes that do not conform to the EUC structure to incorporate additional syllable blocks, completing the coverage of the composed syllable blocks available in Johab and Unicode. The W3C/WHATWG Encoding Standard used by HTML5 incorporates the Unified Hangul Code extensions into its definition of EUC-KR.[44]

Mac OS Korean (HangulTalk)

Other encodings incorporating EUC-KR as a subset include the Mac OS Korean script (known as Code page 10003 or x-mac-korean),[13] which was used by HangulTalk (MacOS-KH), the Korean localization of the classic Mac OS. It was developed by Elex Computer (Template:Lang-ko), who were at the time the authorised distributor of Apple Macintosh computers in South Korea.[45][29]

HangulTalk adds extension characters with lead bytes between 0xA1 and 0xAD, both in unused space within the EUC-KR GR plane (trail bytes 0xA1–0xFE), and using non-EUC codes outside of it (trail bytes 0x41–0xA0). Some of these characters are font-style-independent stylized dingbats.[29] Many of these characters do not have exact Unicode mappings, and Apple software maps these cases variously to combining sequences, to approximate mappings with an appended private-use character as a modifier for round-trip purposes, or to private-use characters.[46]

Apple also uses certain single-byte codes outside of the EUC-KR plane for additional characters: 0x80 for a required space, 0x81 for a won sign (₩), 0x82 for an en dash (–), 0x83 for a copyright sign (©), 0x84 for a wide underscore (＿) and 0xFF for an ellipsis (…).[46] Although none of these additional single-byte codes are within the lead byte range of plain EUC-KR (unlike Apple's extensions to EUC-CN, see above), some are within the lead byte range of Unified Hangul Code (specifically, 0x81, 0x82, 0x83 and 0x84).

EUC-KP

Main article: KPS 9566

Similarly to KS X 1001, the North Korean KPS 9566 standard is typically used in EUC form; in these contexts, it is sometimes referred to as EUC-KP.[47] More recent editions of the standard extend the EUC representation with characters using non-EUC two-byte codes, in a similar manner to Unified Hangul Code.[48]

EUC-TH

Although certain single-byte encodings such as the ISO/IEC 8859 series technically conform to the EUC structure, they are rarely labeled as EUC. However, eucTH is used on Solaris as a label for TIS-620.[49]

EUC-TW

EUC-TW is a variable-length encoding that supports US-ASCII and 16 planes of CNS 11643, each of which is 94x94. It is a rarely used encoding for traditional Chinese characters as used in Taiwan. Variants of Big5 are much more common than EUC-TW, although Big5 only encodes the first two planes of CNS 11643 hanzi, while UTF-8 is becoming more common.

  • As an EUC/ISO 2022 encoding, the C0 control characters, ASCII space, and DEL are encoded as in ASCII.
  • A graphical character from US-ASCII (G0, code set 0) is encoded in GL as its usual single-byte representation (0x21–0x7E).
  • A character from CNS 11643 plane 1 (code set 1) is encoded as two bytes in GR (0xA1–0xFE).
  • A character in planes 1 through 16 of CNS 11643 (code set 2) is encoded as four bytes:
    • The first byte is always 0x8E (Single Shift 2).
    • The second byte (0xA1–0xB0) indicates the plane, the number of which is obtained by subtracting 0xA0 from that byte.
    • The third and fourth bytes are in GR (0xA1–0xFE).

Note that plane 1 of CNS 11643 is encoded twice as code set 1 and a part of code set 2.

See also

Notes

  1. ^ 7-bit ISO 2022 code versions supporting GB 2312 include ISO-2022-CN (with shift codes) and ISO-2022-JP-2 (without shift codes), both of which also support other non-ASCII sets.
  2. ^ These sequences match the hexadecimal forms shown by DEC[30] and the decimal forms (10 65 and 10 66) listed by Lunde.[28] Lunde lists the hexadecimal forms for both as 0xA0 0x42, seemingly in error.

References

  1. ^ a b c d IBM. "Character Data Representation Architecture (CDRA)". IBM. pp. 157–162.
  2. ^ a b c Lunde, Ken (2008). CJKV Information Processing: Chinese, Japanese, Korean, and Vietnamese Computing. O'Reilly. pp. 242–244. ISBN 9780596800925.
  3. ^ "Character Sets". IANA.
  4. ^ "4.2. Names and labels". Encoding Standard. WHATWG.
  5. ^ Zhu, Haifeng; Hu, Daoyuan; Wang, Zhiguan; Kao, Tien-cheu; Chang, Wen-chung; Crispin, Mark (1996). "RFC 1922: Chinese Character Encoding for Internet Messages (§ 2.1: CN-GB)". Requests for Comments. IETF. doi:10.17487/rfc1922.
  6. ^ a b c d "Map (external version) from Mac OS Chinese Simplified encoding to Unicode 3.0 and later". Apple, Inc.
  7. ^ "S-Ch PC Data mixed (IBM GB) including 1880 UDC, 31 IBM selected characters and 5 SAA SB characters". IBM Globalization: Coded character set identifiers. IBM. Archived from the original on 2016-03-26.
  8. ^ "IBM Simplified Chinese Graphic Character Set" (PDF). IBM. 1993. C-H 3-3220-130 1993-11.
  9. ^ "CCSID 1383: S-Ch EUC G0 set, ASCII G1 set, GB 2312-80 set (1382)". IBM Globalization: Coded character set identifiers. IBM. Archived from the original on 2016-03-28.
  10. ^ "IBM Simplified Chinese Graphic Character Set for Extended UNIX Code (EUC)" (PDF). IBM. 1994. C-H 3-3220-132 1994-06.
  11. ^ "CCSID 5479: S-Ch EUC G0 set, ASCII G1 set, GB 2312-80 set (5478)". IBM Globalization: Coded character set identifiers. IBM. Archived from the original on 2016-03-27.
  12. ^ "CCSID 9574: S-Ch DBCS PC GB 2312-80 set, excluding 31 IBM selected and 1360 UDC. Also used in T-Ch 2022-CN TCP". IBM Globalization: Coded character set identifiers. IBM. Archived from the original on 2016-03-27.
  13. ^ a b "Encoding.WindowsCodePage Property - .NET Framework (current version)". MSDN. Microsoft.
  14. ^ Lunde, Ken (1998). Appendix F: GB/T 12345 (PDF). O'Reilly Media. ISBN 9781565922242. {{cite book}}: |work= ignored (help)
  15. ^ Standardization Administration of China (SAC) (2005-11-18). GB 18030-2005: Information Technology—Chinese coded character set.
  16. ^ "Historical trends in the usage of character encodings for websites". W3Techs.
  17. ^ "Distribution of Character Encodings among websites that use Japanese". w3techs.com. Retrieved 2023-01-16.
  18. ^ "CCSID 954 information document". Archived from the original on 2016-03-27.
  19. ^ International Components for Unicode (ICU), ibm-954_P101-2007.ucm, 2002-12-03
  20. ^ a b c d "JIS X 0213 Code Mapping Tables". x0213.org.
  21. ^ "Ambiguities in conversion from Japanese EUC to Unicode (Non-Normative)". XML Japanese Profile. W3C.
  22. ^ "EUC-JP decoder". Encoding Standard. WHATWG. "If the byte is an ASCII byte, return a code point whose value is a byte."
  23. ^ "3.1.1 Details of Problems". Problems and Solutions for Unicode and User/Vendor Defined Characters. The Open Group Japan. Archived from the original on 1999-02-03. Retrieved 2019-08-14.
  24. ^ Kaplan, Michael S. (2005-09-17). "When is a backslash not a backslash?".
  25. ^ a b "4.2 Review Process of Rules for Code Set Conversion Between eucJP-open and UCS". Problems and Solutions for Unicode and User/Vendor Defined Characters. The Open Group Japan. Archived from the original on 1999-02-03. Retrieved 2019-08-14.
  26. ^ a b Lunde, Ken (13 January 2009). "Appendix J: Japanese Character Sets" (PDF). CJKV Information Processing (2nd ed.). ISBN 978-0-596-51447-1.
  27. ^ a b Chang, Hyeshik (8 December 2021). "Readme for CJKCodecs". cPython. Python Software Foundation.
  28. ^ a b c d e f g h i Lunde, Ken (13 January 2009). "Appendix F: Vendor Encoding Methods" (PDF). CJKV Information Processing (2nd ed.). ISBN 978-0-596-51447-1.
  29. ^ a b c d e f g h i j Lunde, Ken (2009). "Appendix E: Vendor Character Set Standards" (PDF). CJKV Information Processing: Chinese, Japanese, Korean & Vietnamese Computing (2nd ed.). Sebastopol, CA: O'Reilly. ISBN 978-0-596-51447-1.
  30. ^ a b "2: Codesets and Codeset Conversion". DIGITAL UNIX Technical Reference for Using Japanese Features. Digital Equipment Corporation, Compaq.
  31. ^ "KS X 1001:1992" (PDF).
  32. ^ Korea Bureau of Standards (1988-10-01). KS C 5601:1987 (PDF). ITSCJ/IPSJ. ISO-IR-149.
  33. ^ "IBM Globalization - Coded character set identifiers - CCSID 971". Archived from the original on 2014-11-30. Retrieved 2021-09-03.
  34. ^ "CCSID 970". IBM Globalization. IBM. Archived from the original on 2014-12-01.
  35. ^ "ibm-970_P110_P110-2006_U2 (alias euc-kr)". Converter Explorer - ICU Demonstration. International Components for Unicode.
  36. ^ International Components for Unicode (ICU), ibm-970_P110_P110-2006_U2.ucm, 2002-12-03
  37. ^ a b "Code Page Identifiers". Windows Dev Center. Microsoft.
  38. ^ Julliard, Alexandre. "dump_krwansung_codepage: build Korean Wansung table from the KSX1001 file". make_unicode: Generate code page .c files from ftp.unicode.org descriptions. Wine Project.
  39. ^ "Usage Statistics and Market Share of EUC-KR for Websites, July 2023". w3techs.com. Retrieved 2023-07-07.
  40. ^ "Distribution of Character Encodings among websites that use .kr". w3techs.com. Retrieved 2023-07-07.
  41. ^ "한글 코드에 대하여" (in Korean). W3C. Archived from the original on 2013-05-24. Retrieved 2019-01-07.
  42. ^ In ucnv_lmb.cpp, a file originating from IBM and included in the International Components for Unicode source tree, the lead byte 0x11 is commented as referring to "Korean: ibm-1261" after the definition of ULMBCS_GRP_KO, and is mapped to the "windows-949" ICU codec in the OptGroupByteToCPName array later in the file.
  43. ^ "Coded character set identifiers - CCSID 1363", IBM Globalization, IBM, archived from the original on 2014-11-29
  44. ^ "5. Indexes (§ index EUC-KR)", Encoding Standard, WHATWG
  45. ^ Gil, Hojin. "HangulTalk: De facto standard Hangul environment for Mac". Guide to using Hangul on Macintosh.
  46. ^ a b Apple (2005-04-05). "Map (external version) from Mac OS Korean encoding to Unicode 3.2 and later". Unicode Consortium.
  47. ^ Kim, Kyongsok (2002-11-30). "3-way cross-reference tables - KS X 1001, KPS 9566, and UCS" (PDF). ISO/IEC JTC 1/SC 2/WG 2 N2564. [Note: updated links for tables accompanying document: [1] [2]]
  48. ^ Chung, Jaemin (2018-01-05). "Information on the most recent version of KPS 9566 (KPS 9566-2011?)" (PDF). UTC L2/18-011.
  49. ^ IBM (2001-05-07). "solaris-eucTH-2.7". icu-data. Unicode Consortium/International Components for Unicode.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Extended_Unix_Code&oldid=1173288237"