Jump to content

Borumba Dam

Coordinates: 26°30′43″S 152°34′44″E / 26.51194°S 152.57889°E / -26.51194; 152.57889
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 124.170.109.141 (talk) at 02:35, 20 October 2017 (corrected direction from Imbul). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Borumba Dam
A panorama of Lake Borumba
Borumba Dam is located in Queensland
Borumba Dam
Location of the Borumba Dam
in Queensland
CountryAustralia
LocationWide Bay–Burnett, Queensland
Coordinates26°30′43″S 152°34′44″E / 26.51194°S 152.57889°E / -26.51194; 152.57889
PurposeIrrigation and potable water supply
StatusOperational
Opening date1963 (1963); upgraded in 1997 (1997) and 2009 (2009)
Operator(s)SEQ Water
Dam and spillways
Type of damEmbankment dam
ImpoundsYabba Creek
Height43 m (141 ft)
Length343 m (1,125 ft)
Dam volume402×10^3 m3 (14.2×10^6 cu ft)
Spillway typeUncontrolled
Spillway capacity3,140 m3/s (111,000 cu ft/s)
Reservoir
CreatesLake Borumba
Total capacity46,000 ML (1,600×10^6 cu ft)[1]
Catchment area465 km2 (180 sq mi)
Surface area480 ha (1,200 acres)
Maximum water depth6.6 m (22 ft)
Website
www.seqwater.com.au

The Borumba Dam is a rock-fill embankment dam with an un-gated spillway located across the Yabba Creek in the Wide Bay–Burnett region of Queensland, Australia. The main purposes of the dam are for irrigation and potable water supply.[2][3] The resultant impounded reservoir is called Lake Borumba.[1]

Location and features

Constructed in 1964, Borumba Dam is one of Queensland's most established[clarification needed] lakes. The dam wall is located about 11 kilometres (6.8 mi) south west of Imbil.

The dam wall is 43 metres (141 ft) high and 343 metres (1,125 ft) long and holds back 46,000 megalitres (1,600×10^6 cu ft) of water when at full capacity. The surface area of the reservoir is 480 hectares (1,200 acres) and the catchment area is 465 square kilometres (180 sq mi). The uncontrolled un-gated spillway has a discharge capacity of 3,140 cubic metres per second (111,000 cu ft/s).[1][3] The dam is managed by Seqwater. The dam wall was raised by 2.5 metres (8 ft 2 in) and completed in 1997. During 2008 and 2009 the dam wall was raised by another 1.6 metres (5 ft 3 in).[4] The second upgrade was intended to allow better management of extreme rainfall events.[5]

According to a local councillor the spillway developed a crack after an earthquake on 1 December 1991.[6]

Recreation

A range of recreation activities are permitted at Borumba Dam including boating (powered and non-powered), canoeing and kayaking, water skiing and jet skiing, fishing, camping, and walking. Picnic and barbeque facilities are available.

Naturally occurring blue-green algae blooms sometimes mean Seqwater closes access to the dam's water for public safety purposes.[7]

See also

References

  1. ^ a b c "Borumba Dam". Water supply: Dams and weirs. Seqwater. 2014. Retrieved 27 June 2014.
  2. ^ Harrison, Rod; James, Ernie; Sully, Chris; Classon, Bill; Eckermann, Joy (2008). Queensland Dams. Bayswater, Victoria: Australian Fishing Network. p. 94. ISBN 978-1-86513-134-4.
  3. ^ a b "Register of Large Dams in Australia" (Excel (requires download)). Dams information. Australian National Committee on Large Dams. 2010. Retrieved 23 June 2014.
  4. ^ "Spillways step up for assessment". International Dam and Power Construction. Global Trade Media. 16 June 2010. Retrieved 26 September 2012.[dead link] [dead link]
  5. ^ "Borumba Dam upgrade won't include storage boost". ABC News. Australia. 9 April 2008. Retrieved 26 September 2012.
  6. ^ Green, Glenis (30 January 2007). "Fault line on dam site". The Courier-Mail. Retrieved 26 September 2012.
  7. ^ "Dam recreation shut down". The Gympie Times. 13 January 2012. Retrieved 26 September 2012.