Jump to content

Molen van Vledder

Coordinates: 52°51′34″N 6°12′55″E / 52.85944°N 6.21528°E / 52.85944; 6.21528
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Hyacinth (talk | contribs) at 01:24, 6 March 2018 (top: | image_size = 300px). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Molen van Vledder
Molen van Vledder, January 2009
Map
Origin
Mill nameNooitgedacht
Mill locationDe Bree 1, 8381 VS Vledder
Coordinates52°51′34″N 6°12′55″E / 52.85944°N 6.21528°E / 52.85944; 6.21528
Operator(s)Private
Year built1968
Information
PurposeCorn mill
TypeSmock mill
StoreysTwo-storey smock
Base storeysThree-storey base
Smock sidesEight sides
No. of sailsFour sails
Type of sailsCommon sails
WindshaftSteel
WindingTailpole and winch
No. of pairs of millstonesOne pair
Size of millstones1.00 metre (3 ft 3 in)

The Molen van Vledder is a smock mill in Vledder, Drenthe, which is used as holiday accommodation. The mill was built in 1968 and is listed as a Rijksmonument, number 357823.[1]

History

A mill stood on this site until 1958. In 1968, the present mill was built by millwright J D Medendorp of Zuidlaren, incorporating parts from two demolished mills.[2] The 1877-built drainage mill De Kooi, Kantens, Groningen which had been demolished in 1961 and the 1862-built drainage mill Gebroeders Bos, which stood at Hoogkerk, Groningen and was demolished in 1963.[3] The mill is used as a holiday home.[2]

Description

The Molen van Vledder is what the Dutch describe as an "achtkante stellingmolen". It is a two-storey smock mill with a stage on a three-storey brick base. The stage is at second-floor level, 6.20 metres (20 ft 4 in) above ground level. The smock and cap are thatched. The mill is winded by a tailpole and winch. The four Common sails have a span of 11.20 metres (36 ft 9 in) and are carried in a steel windshaft. The windshaft also carries the brake wheel which has 31 cogs. This drives the wallower (24 cogs) at the top of the upright shaft. At the bottom of the upright shaft, the great spur wheel, which has 58 cogs, drives the 1.00 metre (3 ft 3 in) diameter French Burr stones via a lantern pinion stone nut with 31 staves.[1]

References

  1. ^ a b "Technische gegevens" (in Dutch). De Hollandsche Molen. Retrieved 20 October 2009. (Click on "Technische gegevens" to view.)
  2. ^ a b "Geschiedenis" (in Dutch). De Hollandsche Molen. Retrieved 20 October 2009. (Click on "Geschiedenis" to view.)
  3. ^ "Vledder, Drenthe" (in Dutch). Molendatabase. Retrieved 20 October 2009.