Jump to content

NER Class P

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 96.45.242.133 (talk) at 13:37, 13 September 2019 (Withdrawal). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

NER Class P
LNER Class J24
Type and origin
Power typeSteam
DesignerWilson Worsdell
BuilderNER Gateshead Works (50)
NER Darlington Works (20)
Build date1894-1898
Total produced70
Specifications
Configuration:
 • Whyte0-6-0
Gauge4 ft 8+12 in (1,435 mm)
Driver dia.4 ft 7.25 in (1.403 m)
Loco weight38.5 long tons (39.1 t) (ns)
39.55 long tons (40.18 t) (su)
Tender weight36.95 long tons (37.54 t)
Fuel typecoal
Boiler pressure160 psi (1,100 kPa)
Cylinderstwo inside
Cylinder size18 in × 24 in (460 mm × 610 mm) (ns)
18.5 in × 24 in (470 mm × 610 mm) (su)
Performance figures
Tractive effort19,140 lbf (85,100 N) (18" cylinders)
20,220 lbf (89,900 N) (18½" cylinders)

The NER Class P (LNER Class J24) was a class of 0-6-0 steam locomotives of the North Eastern Railway.[1][2] They were designed by Wilson Worsdell for mineral traffic.

Modifications

As built, the locomotives had slide valves but 20 were fitted with piston valves and superheaters between 1914 and 1920. The cylinder bore was increased by half an inch at the same time.

In the infobox (right) 'ns' denotes non-superheated and 'su' denotes superheated. Some locomotives later had their superheaters removed but the piston valves were retained.

British Railways

Thirty-four locomotives survived into British Railways ownership in 1948 and their BR numbers were 65600-65644 (with gaps).

Withdrawal

Withdrawals started under LNER ownership in 1933. British Railways quickly withdrew the remaining locomotives and all had gone by the end of 1951. None were preserved.

References

  1. ^ Ian Allan (1948). ABC of British Railways Locomotives. Vol. Part 4. p. 41.
  2. ^ "The W. Worsdell J24 (NER Class P) 0-6-0 Locomotives". LNER Encyclopedia.