GWR 9400 Class

Specifications
Specifications
Configuration:;
• Whyte	0-6-0PT
• UIC	C h2t (10); C n2t (200);
Gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.	4 ft 7+1⁄2 in (1.410 m)
Minimum curve	5 chains (330 ft; 100 m) normal,; 4.5 chains (300 ft; 91 m) slow;
Wheelbase	15 ft 6 in (4.72 m)
Length	33 ft 2 in (10.11 m) over buffers
Width	8 ft 7 in (2.616 m)
Height	12 ft 5+1⁄2 in (3.797 m)
Axle load	19 long tons 5 cwt (43,100 lb or 19.6 t) (21.6 short tons) full
Loco weight	55 long tons 7 cwt (124,000 lb or 56.2 t) (62.0 short tons) full
Fuel type	Coal
Water cap.	1,300 imp gal (5,900 L; 1,600 US gal)
Firebox:
• Grate area	17.40 sq ft (1.617 m2)
Boiler pressure	200 lbf/in2 (1.38 MPa)
Heating surface:
• Firebox	101.7 sq ft (9.45 m2)
• Tubes	1,245.7 sq ft (115.73 m2)
• Total surface	1,347 sq ft (125.1 m2)
Cylinders	Two, inside
Cylinder size	17+1⁄2 in × 24 in (444 mm × 610 mm)

Type and origin
Type and origin
Power type	Steam
Builder	Swindon Works (10); R. Stephenson & Hawthorns (100); W. G. Bagnall (50); Yorkshire Engine Company (50);
Order number	GWR Lot Nos. 365, 382–387
Serial number	RSH: 7450–69, 7547–96, 7611–40; WGB: 2910–2959; YEC: 2443–72, 2544–53, 2575–84;
Build date	1947–1956
Total produced	210

Great Western Railway 9400 class
Great Western Railway 9400 class
	9466 is one of two preserved members of the 210-strong class. Its Great Western Railway livery is inauthentic as it was one of those built for British Railways after nationalisation.
Power type
Type and origin
Power type	Steam
Builder	Swindon Works (10); R. Stephenson & Hawthorns (100); W. G. Bagnall (50); Yorkshire Engine Company (50);
Order number	GWR Lot Nos. 365, 382–387
Serial number	RSH: 7450–69, 7547–96, 7611–40; WGB: 2910–2959; YEC: 2443–72, 2544–53, 2575–84;
Build date	1947–1956
Total produced	210
Configuration:;
Specifications
Configuration:;
• Whyte	0-6-0PT
• UIC	C h2t (10); C n2t (200);
Gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.	4 ft 7+1⁄2 in (1.410 m)
Minimum curve	5 chains (330 ft; 100 m) normal,; 4.5 chains (300 ft; 91 m) slow;
Wheelbase	15 ft 6 in (4.72 m)
Length	33 ft 2 in (10.11 m) over buffers
Width	8 ft 7 in (2.616 m)
Height	12 ft 5+1⁄2 in (3.797 m)
Axle load	19 long tons 5 cwt (43,100 lb or 19.6 t) (21.6 short tons) full
Loco weight	55 long tons 7 cwt (124,000 lb or 56.2 t) (62.0 short tons) full
Fuel type	Coal
Water cap.	1,300 imp gal (5,900 L; 1,600 US gal)
Firebox:
• Grate area	17.40 sq ft (1.617 m2)
Boiler pressure	200 lbf/in2 (1.38 MPa)
Heating surface:
• Firebox	101.7 sq ft (9.45 m2)
• Tubes	1,245.7 sq ft (115.73 m2)
• Total surface	1,347 sq ft (125.1 m2)
Cylinders	Two, inside
Cylinder size	17+1⁄2 in × 24 in (444 mm × 610 mm)
Tractive effort
Performance figures
Tractive effort	22,515 lbf (100.15 kN)
Operators
Career
Operators	Great Western Railway; Western Region of British Railways;
Class	9400 or 94XX
Power class	GWR: C; BR: 4F;
Numbers	9400–9499, 8400–8499, 3400–3409
Axle load class	GWR: Red
Withdrawn	1959–1965
Preserved	9400, 9466
Disposition	Two preserved, remainder scrapped

The Great Western Railway (GWR) 9400 Class is a class of 0-6-0 pannier tank steam locomotive, used for shunting and banking duties.

The first ten 9400s were the last steam engines built by the GWR. After nationalisation in 1948, another 200 were built by private contractors for British Railways (BR). Most had very short working lives as the duties for which they were designed disappeared through changes in working practices or were taken over by diesel locomotives. Two locomotives survived into preservation, one as part of the National Collection.

Design

The 9400 class was the final development in a long lineage of tank locomotives that can be directly traced to the 645 Class of 1872. Over the decades details altered, the most significant being the adoption of Belpaire fireboxes necessitating pannier tanks.

The 9400 resembled a pannier tank version of the 2251 class, and indeed shared the same boiler and cylinders as the 2251, but was in fact a taper-boilered development of the 8750 subgroup of the 5700 class. The advantage was a useful increase in boiler power, but there was a significant weight penalty that restricted route availability. The 10 GWR-built locomotives had superheaters but the remainder did not.

The first ten 9400s were built by the Great Western and were the last steam engines built by the company. After the nationalisation of Britain's railways in 1948, private contractors built another 200 for British Railways.

The 9400s were numbered 9400–9499, 8400–8499 and 3400–3409. BR gave them the power classification 4F.

Duties

The 9400 class were used on Paddington empty stock work right up to the end of steam on the Western Region of British Railways. A familiar sight at the buffer stops at departure side in 1964–1965 was a filthy 9400 class locomotive devoid of number plates simmering at the head of a rake of British Railways Mark 1 coaches.

Numbers 8400 to 8406 served as bank engines on the Lickey Incline after its transferral to the Western Region.

In retrospect they were a wasteful investment, many having very short lives of less than 10 years as their intended work dried up and diesels took over their remaining duties. 8447 holds the unenviable record of the shortest life of any GWR loco in BR times, beginning in August 1954 and ending four years and nine months later in May 1959.

Build details

Table of orders and numbers^[1]
Lot No.	Fleet Nos.	Manufacturer	Serial Nos.	Date	Notes
365	9400–9409	Swindon Works	—	1947
382	9410–9459	Robert Stephenson and Hawthorns	7547–7596	1950–1951
383	9460–9489	Robert Stephenson and Hawthorns	7611–7640	1950–1953
384	8400–8449	W. G. Bagnall	2910–2959	1949–1954
385	8450–8479	Yorkshire Engine Company	2443–65/67–71/66/72	1949–1952
386	8480–8499	Robert Stephenson and Hawthorns	7450–7469	1952	under subcontract from Hudswell Clarke
387	9490–9499	Yorkshire Engine Company	2544–2553	1954–1955	under subcontract from Hunslet Engine Company
387	3400–3409	Yorkshire Engine Company	2575–2584	1955–1956	under subcontract from Hunslet Engine Company

No. 3409 was the last locomotive built for British mainline use by private contractors. It was ordered by GWR in December 1947 and delivered by Yorkshire Engine Company in October 1956.^[2]

Preservation

Two have been preserved:

9400 at Swindon Steam Railway Museum
9466 is based at the Buckinghamshire Railway Centre but does visit other railways from time to time. The locomotive is operational and mainline certificated. 9466 is currently in working order.

Models

Lima produced a model of the class in 00 gauge between 1978 and 1985 also Graham Farish produced an 00 model in the 1960s. Graham Farish manufacture a model of the 94xx in N scale. Bachmann are producing a model of the 94xx in 00 scale, as of November 2015^[update].

References

^ Whitehurst 1973, pp. 32, 70, 73–74.
^ Atkins 1999, p. 51.

Sources

Atkins, Philips (1999). The Golden Age of Steam Locomotive Building. Penryn, Cornwall: Atlantic Transport Publishers and the National Railway Museum. ISBN 0-906899-87-7. OCLC 468585665. {{cite book}}: Invalid |ref=harv (help)
Russell, J. H. (1975). A Pictorial Record of Great Western Engines.
Whitehurst, Brian (1973). Great Western Engines, Names, Numbers, Types and Classes (1940 to Preservation). Oxford, UK: Oxford Publishing Company. pp. 32, 70, 73–74, 82, 102, 158. ISBN 978-0-9028-8821-0. OCLC 815661.

External links

[FOOTNOTEWhitehurst197332,_70,_73–74-1] Whitehurst 1973, pp. 32, 70, 73–74.

[FOOTNOTEAtkins199951-2] Atkins 1999, p. 51.

[1]

[2]