Jump to content

Smith & Wesson Model 10: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Hmainsbot1 (talk | contribs)
m Users: AWB general fixes and delink dates per WP:DATELINK, WP:YEARLINK and MOS:UNLINKYEARS using AWB
Line 96: Line 96:


==Use==
==Use==
[[File:Bundesarchiv Bild 101I-720-0318-36, Frankreich, Milizionär bewacht Widerstandskämpfer.jpg|right|250px|Smith and Wesson Model 10 used by the Milice chambered in 8mm French Ordance.]]

Many of the Model 10 revolvers were captured and used by some of the police forces, such as the [[Austrian Police]], during the occupation after WWII. Some captured from the allies were used by the pro-Nazi [[Milice|Milice française]] militia of [[Vichy France]] during WWII. From 1942, the United States delivered the Model 10 to [[Kuomintang]] troops who were armed by Communist [[Liu Shaoqi]] during the Chinese Civil War.
Many of the Model 10 revolvers were captured and used by some of the police forces, such as the [[Austrian Police]], during the occupation after WWII. Some captured from the allies were used by the pro-Nazi [[Milice|Milice française]] militia of [[Vichy France]] during WWII. From 1942, the United States delivered the Model 10 to [[Kuomintang]] troops who were armed by Communist [[Liu Shaoqi]] during the Chinese Civil War.



Revision as of 13:58, 13 July 2016

Smith & Wesson Model 1899 Military & Police
Lend-Lease M&P dating from World War II, missing lanyard ring
TypeService revolver
Place of originUnited States
Service history
Used bySee Users
WarsWorld War I
World War II
Korean War
Vietnam War
Gulf War
other conflicts
Production history
Designed1899
ManufacturerSmith & Wesson
Produced1899–present
Variants38 M&P
M&P Model 1902
Model of 1905
Victory Model
Model 10
Specifications
Mass~ 34 oz (907 g) with standard 4" (102 mm) barrel (unloaded)
Barrel length
  • 2 inches (51 mm)
  • 2.5 inches (64 mm)
  • 3 inches (76 mm)
  • 4 inches (100 mm)
  • 5 inches (130 mm)
  • 6 inches (150 mm)

Cartridge.38 Long Colt
.38 Special
.38/200 (.38 S&W)
ActionDouble action
Muzzle velocity1,000 feet per second (300 m/s) (.38 Special)
685 feet per second (209 m/s) (.38/200)
Feed system6-round cylinder
SightsBlade front sight, notched rear sight

The Smith & Wesson Model 10, previously known as the Smith & Wesson .38 Hand Ejector Model of 1899, the Smith & Wesson Military & Police or the Smith & Wesson Victory Model, is a revolver of worldwide popularity. It was the successor to the Smith & Wesson .32 Hand Ejector Model of 1896 and was the first Smith & Wesson revolver to feature a cylinder release latch on the left side of the frame like the Colt M1889. In production since 1899, it is a six-shot double-action revolver with fixed sights. Over its long production run it has been available with barrel lengths of 2 in (51 mm), 3 in (76 mm), 4 in (100 mm), 5 in (130 mm), and 6 in (150 mm). Barrels of 2.5 inches (64 mm) are also known to have been made for special contracts.[1] Some 6,000,000 of the type have been produced over the years, making it the most popular centerfire revolver of the 20th century.[2]

History

In 1899, the Army and Navy placed orders with Smith & Wesson for two to three thousand Model 1899 Hand Ejector revolvers chambered for the M1892 .38 Long Colt U.S. Service Cartridge. With this order, the Hand Ejector Model became known as the .38 Military and Police model.[3] That same year, in response to reports from military sources serving in the Philippines on the relative ineffectiveness of the new cartridge, Smith & Wesson began offering the Military & Police in a new chambering, .38 S&W Special (aka .38 Special) — a slightly elongated version of the .38 Long Colt cartridge with greater bullet weight (158 grains) and an increased powder charge, from eighteen to twenty-one grains of gunpowder.[3]

In 1902 the .38 Military & Police (2nd Model) was introduced, featuring substantial changes.[1] These included major modification and simplification of the internal lockwork and the addition of a locking underlug on the barrel to engage the previously free-standing ejector rod. Barrel lengths were 4, 5, 6, and 6.5 inches with a rounded butt. Serial numbers for the Military & Police ranged from number 1 in the series to 20,975. Most of the early M&P revolvers chambered in .38 Special appear to have been sold to the civilian market.[3] By 1904, S&W was offering the .38 M&P with a rounded or square butt, and 4, 5, and 6.5-inch barrels.

The .38 S&W Military & Police Model of 1905 4th Change (introduced 1915), incorporated a passive hammer block and enlarged service sights that quickly became a standard across the service revolver segment of the industry. Heat treatment of cylinders began in 1919.[4]

The 1st Model M&P of 1899, six-inch barrel. The ejector rod is free-standing, without the under-barrel latch of later models
Smith & Wesson 1905 4th change 1915 Target model. "NRA"Slow Fire at 25 yards. This one left the factory in 1929 and was sent with ten others to a firm in Buenos Aires. The hammer was added later and is in the general form of the King Gun Shop modification usually intended for the timed and rapid fire portions of the NRA course.
The lockwork of the first model differed substantially from subsequent versions. The trigger return spring is a flat leaf rather than the coil spring-powered slide used in variations dating from 1905 onwards.
The M&P 1905 Fourth Change variant (1915). The lock mechanism remained principally unchanged after this model.

Victory Model

The S&W Model 10 military revolvers produced from 1942 to 1944 had serial numbers with a "V" prefix, and were known as the Smith & Wesson Victory Model. It is noteworthy that early Victory Models did not always have the V prefix. During World War II over 570,000 of these pistols were supplied to the United Kingdom, Canada, Australia, New Zealand, and South Africa under the Lend-Lease program, chambered in the British .38/200 caliber already in use in the Enfield No 2 Mk I Revolver and the Webley Mk IV Revolver. Most Victory Models sent to Britain were fitted with 4" (102 mm) or 5" (127 mm) barrels, although a few early versions had 6" (150 mm) barrels.[5][6] In general, most British and Commonwealth forces expressed a preference for the .38/200 Smith & Wesson over their standard Enfield revolver.[7]

The Victory Model was used by United States forces during World War II, being chambered in the well-known and popular .38 Special cartridge. The Victory Model was a standard-issue sidearm for US Navy and Marine aircrews, and was also used by security guards at factories and defense installations throughout the United States during the war.[8]

Some of these revolvers remained in service well into the 1990s with units of the US Armed Forces, including the Coast Guard. Until the introduction of the Beretta M9 9mm pistol in 1990, U.S. Army helicopter crew members and female Military Police officers were equipped with .38 caliber Victory Model revolvers. Criminal Investigation Division agents were issued .38 caliber revolvers with two inch barrels. The Victory Model remained in use with Air National Guard tanker and transport crews as late as Operation Desert Storm in 1991.[9]

Some Lend-Lease Victory Model revolvers originally chambered for the British .38/200 were returned to the U.S. and rechambered to fire the more popular and more powerful .38 Special ammunition, and such revolvers are usually so marked on their barrels. Rechambering of .38-200 cylinders to .38 Special results in oversized chambers which may cause problems. Lee Harvey Oswald was carrying a re-chambered Victory Model when he was apprehended on November 22, 1963.[10]

The finish on Victory Models was typically a sandblasted and parkerized finish, which is noticeably different from the higher-quality blue or nickel/chrome finishes usually found on commercial M&P/Model 10 revolvers. Other distinguishing features of the Victory Model revolver are the lanyard loop at the bottom of the grip frame, and the use of smooth (rather than checkered) walnut grip panels. However some early models did use a checkered grip, most notably the pre-1942 manufacture.[11]

Post-World War II models

After World War II, Smith & Wesson returned to manufacturing the M&P series. Along with cosmetic changes and replacement of the frame fitting grip with the Magna stocks, the spring-loaded hammer block safety gave way to a cam-actuated hammer block that rode in a channel in the side plate (Smith 1968). In 1957, Smith & Wesson adopted the convention of using numeric designations to distinguish their various models of handguns, and the M&P was renamed the Model 10.[9]

The M&P/Model 10 has been available in both blued steel finish and nickel finish for most of its production run. The model has also been offered throughout the years with both the round butt and square butt (i.e. grip patterns). Beginning with the Model 10-5 series in the late 1960s, the tapered barrel and its trademark 'half moon' front sight (as shown in the illustrations on this page) were replaced by a straight bull barrel and a sloped milled ramp front sight. Late model Model 10s are capable of handling any .38 Special cartridge produced today up to and including +P+ rounds.[9]

As of 2012 the Model 10 was available only in a 4" (102mm) barrel model. The Model 10's stainless steel (Inox) counterpart, the Smith & Wesson Model 64, is also available with only a 4" (102 mm) barrel.[12]

Model 10 Engineering and Production Changes Timeline

As the Model 10 evolved, the following Engineering and Production Changes were made:

  • 10 (1957): begin stamping model number.
  • 10-1 (1959): introduction of heavy barrel (the frame is slightly different for the heavy barrel, and changes to the standard-barrel variant were generally carried over to the heavy-barrel variant, thus the engineering changes happen in pairs)
  • 10-2 (1961): change extractor rod thread for standard barrel
  • 10-3 (1961): change extractor rod thread for heavy barrel, change front sight width from 1/10" to 1/8"
  • 10-4 (1962): eliminate trigger-guard screw on standard barrel frame
  • 10-5 (1962): change sight width from 1/10" to 1/8" for standard barrel
  • 10-6 (1962): eliminate trigger-guard screw on heavy-barrel frame
  • 10-7 (1977): change gas ring from yoke to cylinder for standard barrel
  • 10-8 (1977): change gas ring from yoke to cylinder for heavy barrel
  • 10-9 (1988): new yoke retention system, radius stud package, floating hand hammer nose bushing for standard barrel
  • 10-10 (1988): new yoke retention system, radius stud package, floating hand hammer nose bushing for heavy barrel
  • 10-11 (1997): MIM hammer/trigger + floating firing pin for standard barrel
  • 10-12 (1997): MIM hammer/trigger + floating firing pin for heavy barrel
  • 10-13 (2002): limited production 1899 commemorative edition
  • 10-14 (2002): internal lock

.357 Magnum variations

After a small prototype run of Model 10-6 revolvers in .357 Magnum caliber, Smith & Wesson introduced the Model 13 heavy barrel in carbon steel and then the Model 65 in stainless steel. Both revolvers featured varying barrel weights and lengths—generally three and four inches with and without underlugs (shrouds). Production dates begin in 1974 for the Model 13 and end upon discontinuation in 1999. The Model 65 was in production from 1972-1999.[1] Both the blued and stainless models were popular with police and FBI and a variation of the Model 65 was marketed in the Lady Smith line from 1992-1999.

Use

Smith and Wesson Model 10 used by the Milice chambered in 8mm French Ordance.
Smith and Wesson Model 10 used by the Milice chambered in 8mm French Ordance.

Many of the Model 10 revolvers were captured and used by some of the police forces, such as the Austrian Police, during the occupation after WWII. Some captured from the allies were used by the pro-Nazi Milice française militia of Vichy France during WWII. From 1942, the United States delivered the Model 10 to Kuomintang troops who were armed by Communist Liu Shaoqi during the Chinese Civil War.

The weapon is currently used by French cash couriers and banks, Disciplined Services of Hong Kong, Myanmar Police Force officers and other Burmese paramilitary units, Peruvian National Police and other police units.

Copies of Smith & Wesson Model 10 are produced in Israel by Israel Military Industries (IMI) as the Revolver IMI 9mm. The weapon is chambered in the 9×21mm caliber instead of .38 Special, the original caliber. Also, Norinco of China has manufactured the NP50, which is a copy of the Smith & Wesson Model 64, since 2000.

Hermann Goering, a German Nazi military leader had a .38 Model 10 for self defence.

Replacement

The S&W Model 10 revolver was a popular weapon before the semi-automatic pistol replaced the revolver in many police departments as well as police units and armies.

Users

See also

References

  1. ^ a b c Supica, Jim; Richard Nahas (2001). Standard Catalog of Smith & Wesson. Iola Wisconsin: Krause Publications. p. 1068.
  2. ^ Boorman, Dean K., The History of Smith & Wesson Firearms (2002), p. 46: "The .38 in Military and Police Model 10 has historically been the mainstay of the Smith & Wesson Company, with some 6,000,000 of this general type produced to date. It has been described as the most successful handgun of all time, and the most popular centerfire revolver of the 20th Century."
  3. ^ a b c Cumpston, Mike (2003-01-16). "The First M&P". Gunblast.com. Retrieved 2008-05-02.
  4. ^ Smith, W.H.B (1968). Book of Pistols and Revolvers (7th ed.). Harrisburg: Stackpole Books.
  5. ^ Shore, C. (Capt), With British Snipers to the Reich, Paladin Press (1988), p. 55
  6. ^ Dunlap, Roy, Ordnance Went Up Front, Samworth Press (1948), p. 142
  7. ^ Shore, C. (Capt), With British Snipers to the Reich, Paladin Press (1988), p. 202
  8. ^ Ayoob, Massad (15 March 2010). Massad Ayoob's Greatest Handguns of the World. Iola, Wisconsin: Gun Digest Books. p. 71. ISBN 1-4402-1503-0.
  9. ^ a b c d e f g h i j k l m n o p q r s t u v Supica, Jim; Nahas, Richard (2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. pp. 141–143, 174, 210–211. ISBN 0-89689-293-X.
  10. ^ Martin, Orlando (January 2010). JFK. Analysis of a Shooting: The Ultimate Ballistics Truth Exposed. Dog Ear Publishing. pp. 118–119. ISBN 978-1-60844-315-4.
  11. ^ Hunter, Hunter (2009). "S&W Victory & Colt Commando Revolvers". American Rifleman. 157 (6). Fairfax, Virginia: National Rifle Association of America: 36–37. ISSN 0003-083X.
  12. ^ Shideler, Dan (7 August 2011). Gun Digest 2012. Iola, Wisconsin: Gun Digest Books. p. 420. ISBN 1-4402-1447-6.
  13. ^ a b c Arnold, David (28 February 2011). Classic Handguns of the 20th Century. Iola, Wisconsin: Gun Digest Books. p. 33. ISBN 1-4402-2640-7.
  14. ^ Sugiura, Hisaya (September 2015). "Pistols of the Japanese police in the postwar era". Gun Professionals. Hobby Japan: 72–79.
  15. ^ Schwing, Ned (5 November 2005). Standard Catalog of Military Firearms: The Collector's Price and Reference Guide. Iola, Wisconsin: Krause Publications. p. 323. ISBN 0-87349-902-6.