Jump to content

Quadrant roadway intersection

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 20:28, 5 January 2021 (Task 18 (cosmetic): eval 10 templates: hyphenate params (13×);). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A single-quadrant roadway intersection.

A quadrant roadway intersection adds an additional "quadrant roadway" between two legs of an intersection. This roadway adds two three-way intersections in addition to the original four-way intersection moving all left turns (in right-hand traffic countries) or right turns (in left-hand traffic countries) from the main intersection. The design is intended to improve traffic flow by reducing signal timing phases from four to two in the main intersection. The design is intended for intersections where large artery routes meet in an area of dense development and high pedestrian volume.[1][2]

Proponents also point to a reduction in places where accidents could occur from vehicles potentially crossing paths as well as a low development cost compared to roundabouts or the more complex single-point urban interchange designs.[1][3][4] Opponents point to the increase in points where accidents could occur with merging traffic as well as the non-traditional nature of the design which has the potential to confuse drivers. Opponents also rebut low cost claims pointing to right-of-way and construction costs of the quadrant road.[1][3]

Variants

Single-quadrant intersections (pictured above) feature a single quadrant road.

A double-quadrant intersection (or two-quadrant intersection) adds a second quadrant road placed opposite another.[5][6][7]

Another variant links grade-separated roads, generally a faster road with denser traffic, to a less traveled, slower road, via the quadrant road. This design is referred to as a one-quadrant interchange[8] or as a single-loop intersection.[4] This type of junction is common in Germany, where it is called a "partial at-grade intersection" (Template:Lang-de).[9] A so-called two-quadrant interchange also exists, which adds a second quadrant road (although the term "two-quadrant interchange" could be applied to any grade-separated junction in which there are ramps in two quadrants).[10]

Examples

Canada

The single-loop variant is used frequently in the Thornhill area, in the Greater Toronto Area in Ontario, Canada, examples include:

United States

Germany

References

  1. ^ a b c Turner-Fairbank Highway Research Center (August 2004). "Signalized Intersections: Informational Guide". ALTERNATIVE INTERSECTION TREATMENTS. United States Department of Transportation. Retrieved 3 January 2010.
  2. ^ Cooke, Jordan (Mar 24, 2009). "Left turns left out of road redesign". Cary News. Archived from the original on April 10, 2009. Retrieved 3 January 2010.
  3. ^ a b Hummer, Joseph E. (May 14, 2003). "Moving More Cars Through the Same Space Using Unconventional Intersection Designs" (PDF). NCDOT Traffic Engineering Conference. North Carolina State University. Retrieved 3 January 2010.
  4. ^ a b "Quadrant Roadway Intersection vs. Traditional Intersection" (PDF). Community Planning Assn. of Southwest Idaho. Retrieved 3 January 2010.
  5. ^ "Quadrant Roadway Intersection". Alternative Intersections/Interchanges: Informational Report (AIIR). Federal Highway Administration. April 2010. FHWA-HRT-09-060. Retrieved September 4, 2017.
  6. ^ Wilbur Smith Associates; Thompson Transportation; HDR; Hummer, Joseph E., Ph.D., P.E. (April 21, 2008). "Intersection Concept Layout Report" (PDF). High Volume Intersection Study (PDF). Community Planning Association of Southwest Idaho. Retrieved September 4, 2017.{{cite web}}: CS1 maint: multiple names: authors list (link)
  7. ^ Nelson, Catherine M., P.E.; Belleque, Kent; Crossler-Laird, Rich; Gutierrez, Rodger; Henson, Christopher; Lindland, Steve; Nguyen, Lily; Polly, Dave; Warrick, Dave (2012). "Chapter 2: Design Controls and Criteria" (PDF). ODOT Highway Design Manual (PDF). Oregon Department of Transportation. Retrieved September 4, 2017.{{cite web}}: CS1 maint: multiple names: authors list (link)
  8. ^ "Archived copy" (PDF). Archived from the original (PDF) on April 12, 2015. Retrieved December 23, 2014.{{cite web}}: CS1 maint: archived copy as title (link)
  9. ^ Institut für Straßen- und Eisenbahnwesen am KIT: Entwurf und Bau von Straßen – Teil: Straßenentwurf. (PDF; 8,44 MB) Abgerufen am 7. September 2013.
  10. ^ Maze, T.H.; Hochstein, Joshua L.; Souleyrette, Reginald R.; Preston, Howard; Storm, Richard (2010). Appendix A, Detailed Green Book Review with Comments (PDF) (PDF). Transportation Research Board. doi:10.17226/22958. ISBN 978-0-309-43543-7. Project Number 15-30. Retrieved September 12, 2017. {{cite book}}: |work= ignored (help)
  11. ^ "Cary Parkway and High House Road Intersection Improvements". Town of Cary, North Carolina. Retrieved 3 January 2010.