GWR 6959 Class

Great Western Railway 6959 Class
6990 Witherslack Hall with a Collett tender
Type and origin Power type Steam Builder GWR/BR Swindon Works Build date 1944–1950 Total produced 71 (6959 Peatling Hall-7929 Wyke Hall)
Specifications Configuration: ​  • Whyte 4-6-0  • UIC 2′C h2 Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Leading dia. 3 ft 0 in (0.914 m) Driver dia. 6 ft 0 in (1.829 m) Minimum curve 8 chains (530 ft; 160 m) normal, 7 chains (460 ft; 140 m) slow Length 63 ft 0+1⁄4 in (19.21 m) over buffers Width 8 ft 11+1⁄2 in (2.731 m) Height 13 ft 2 in (4.013 m) Axle load 19 long tons 5 cwt (43,100 lb or 19.6 t) (21.6 short tons) Adhesive weight 57 long tons 10 cwt (128,800 lb or 58.4 t) (64.4 short tons) Loco weight 75 long tons 16 cwt (169,800 lb or 77 t) (84.9 short tons) full Tender weight 47 long tons 6 cwt (106,000 lb or 48.1 t) (53.0 short tons) full Fuel type Coal Fuel capacity 6 long tons 0 cwt (13,400 lb or 6.1 t) (5.6 short tons) Water cap. 4,000 imp gal (18,000 L; 4,800 US gal) Firebox: ​  • Grate area 27.07 sq ft (2.515 m2) Boiler pressure 225 psi (1.55 MPa) Heating surface: ​  • Firebox 154.90 sq ft (14.391 m2)  • Tubes and flues 1,582.60 sq ft (147.028 m2) Superheater: ​  • Heating area 295 sq ft (27.4 m2) Cylinders Two, outside Cylinder size 18.5 in × 30 in (470 mm × 762 mm) Valve gear Stephenson, inside Valve type Piston valves
Performance figures Tractive effort 27,275 lbf (121.33 kN)
Career Operators Great Western Railway → British Railways Power class GWR: D, BR: 5MT Numbers 6959–6999, 7900-7929 Axle load class GWR: Red Withdrawn 1963–1965 Disposition Six preserved, remainder scrapped

The Great Western Railway (GWR) 6959 Class or Modified Hall Class is a class of 4-6-0 steam locomotive. They were a development by Frederick Hawksworth of Charles Collett's earlier Hall Class named after English and Welsh country houses.

Background

Although the GWR had been at the forefront of British locomotive development between 1900 and 1930, the 1930s saw a degree of complacency at Swindon reflected in the fact that many designs and production methods had not kept pace with developments elsewhere. This was especially true with the useful GWR 4900 Class, the design of which largely originated in the 1900s and had not fundamentally changed since the mid-1920s. Charles Collett was replaced as the Chief Mechanical Engineer of the Railway by F.W. Hawksworth in 1941 who immediately created a modified version of the design, known as the 'Modified Hall Class'.

Design

The Modified Halls marked the most radical change to Swindon Works' practice since Churchward's time as chief mechanical engineer and was very far from a simple modification of the Hall design. 'Although in outward appearance it looked almost the same, nearly everything about it was new.' Hawksworth's use of plate frames throughout the design was a break with Churchward's practice for 2 Cylinder locomotives. The cylinders were cast separately from the smokebox saddle and bolted to the frames on each side. A stiffening brace was inserted between the frames and extended to form the smokebox saddle. The exhaust pipes leading from the cylinders to the blastpipe were incorporated into this assembly.

Additionally, Churchward's bar framed bogie which had been adapted for the original Hall prototype in 1924 was replaced by a plate frame structure with individual springing. There were changes too above the running board. Hawksworth decided that the declining quality of coal reaching Great Western depots necessitated a higher degree of superheating. A larger three-row superheater and header regulator were fitted into Swindon No.1 boiler. Improvements were subsequently made to the draughting on some engines, while others were fitted with hopper ashpans.

Production

6998 Burton Agnes Hall a British Railways built locomotive, with a Hawksworth flat-sided tender.

The first batch of twelve Modified Halls was delivered from Swindon works between March and September 1944. They carried plain black livery were unnamed and numbered 6959-6970 (immediately following the Hall Class sequence). They were all subsequently named between 1946 and 1948.

A further batch of ten locomotives appeared during October and November 1947 and others were on order when the nationalisation or Britain's railways took place in 1948. British Railways continued construction of this class until November 1950, by which time there were seventy-one examples.

Some modified Halls were equipped with a flat, high-sided Hawksworth tenders. Once he became Chief Mechanical Engineer, many earlier locomotives also received these tenders so a Hawksworth tender does not necessarily mean a Hawksworth locomotive.

Assessment

The Modified Hall class 'ran freely, steamed well and were popular with both footplate and maintenance staff. After the unambitious designs of Collett's final years, they restored Swindon's reputation.' Fourteen survived until the end of steam on the former GWR in 1965.

List of locomotives

• See List of GWR 6959 Class locomotives

Preservation

Main article: Preserved GWR Modified Hall Class locomotives

Six Modified Halls are preserved on various heritage railways. A seventh survivor no 7927 Willington Hall is being used as a donor for the Grange and County re-creation projects.

Locos in Preservation

Out of the Six engines to be preserved, four engines have run in preservation. Half of the class have also seen main line operation: Nos. 6960 Raveningham Hall, 6990 Witherslack Hall & 6998 Burton Agnes Hall. 6960 & 6998 Saw main use in the 1980s especially in 1985 when the locos saw regular use during the GW150 Celebrations. 6998 was a popular mainline performer in the late 1980's and also in the 90's until 1996 when she was withdrawn from operation awaiting an overhaul, three of the class are currently operational but since 6998 was withdrawn no Modified Hall's have been seen running on the main line.

Number	Name	Image	Built	Withdrawn	Status	Current Location	Notes
6960	Raveningham Hall		March 1944	June 1964	Operational	West Somerset Railway	Boiler ticket expires in 2022.
6984	Owsden Hall		February 1948	December 1965	Undergoing Restoration	Swindon and Cricklade Railway	Undergoing restoration from ex Barry scrapyard condition.
6989	Wightwick Hall		March 1948	June 1964	Undergoing Restoration	Buckinghamshire Railway Centre
6990	Witherslack Hall		April 1948	December 1965	Operational	Great Central Railway	Recently returned to traffic from a major overhaul which included the pairing with an authentic Hawksworth tender which was formerly paired with 4930 Hagley Hall. Boiler ticket expires in 2026.
6998	Burton Agnes Hall		January 1949	December 1965	Static Display	Didcot Railway Centre	Awaiting Overhaul. Famed for working the GWS Vintage trains which used vintage GWR carriages.
7903	Foremarke Hall		March 1949	June 1964	Operational	Gloucestershire and Warwickshire Railway	Recently returned to traffic following completion of her recent overhaul. Boiler ticket expires in 2026.

References

• Whitehurst, Brian (1973). Great Western Engines, Names, Numbers, Types and Classes (1940 to Preservation). Oxford, UK: Oxford Publishing Company. pp. 63–64, 69, 103, 131. ISBN 978-0-9028-8821-0. OCLC 815661.

External links

• Great Western Archives - Modified Hall Class.