Lansdale/Doylestown Line
Lansdale/Doylestown Line | |||
---|---|---|---|
Overview | |||
Status | Operating | ||
Locale | Philadelphia Montgomery County Bucks County | ||
Termini | |||
Stations | 28 | ||
Website | septa.org | ||
Service | |||
Type | Commuter rail | ||
System | SEPTA Regional Rail | ||
Route number | R5 Doylestown and R5 Lansdale (1984-2010) | ||
Operator(s) | SEPTA | ||
Depot(s) | SEPTA Yards and maintenance facilities | ||
Rolling stock | Electric multiple units | ||
Daily ridership | 16,267[1]: 94 | ||
History | |||
Electrification | July 26, 1931 | ||
Technical | |||
Character | Grade-separated and At-grade street running | ||
Track gauge | 4 ft 8+1⁄2 in (1,435 mm) standard gauge | ||
Electrification | SEPTA's 25 Hz traction power system Amtrak's 25 Hz traction power system | ||
|
The Lansdale/Doylestown Line is a SEPTA Regional Rail line connecting Center City Philadelphia to Doylestown in Bucks County, Pennsylvania. Until 1981, diesel-powered trains continued on the Bethlehem Branch from Lansdale to Quakertown, Bethlehem, and Allentown. Restored service has been proposed, but is not planned by SEPTA. The line is currently used by the East Penn Railroad, serving Quakertown's industrial complexes.
History
This section possibly contains original research. (September 2010) |
The Lansdale-Doylestown line utilizes what is known as the SEPTA Main Line, a four-track line that has been owned by SEPTA since 1983 (prior to that, by Conrail between 1976 and 1983 and by the Reading Railroad before 1976), and the former Reading Railroad (RDG) Doylestown Branch. Historically, the main part of the line, from Philadelphia north to Lansdale, was part of the Reading Railroad's route from Philadelphia to Bethlehem, and then to Wilkes-Barre and Scranton.
Originally arriving and departing at the former Reading Terminal, now part of the Pennsylvania Convention Center, the line has, since 1985, been directly connected to the ex-PRR/Penn Central side by the Center City Commuter Rail Tunnel. Unlike the ex-PRR/Penn Central Paoli/Thorndale Line it is often paired with for through-service, the ex-RDG line was not as heavily built, as the RDG segregated its through-freight and passenger movements. While the four-track section between the tunnel and Wayne Junction and the two-track section from Wayne Junction to Jenkintown are grade-separated, the two-track section from Jenkintown to Lansdale and the single track from Lansdale to Doylestown has both at-grade railroad crossings and over- and underpasses.[2]
Electrified service between Philadelphia and Hatboro, Lansdale, Doylestown and West Trenton was opened on July 26, 1931. Equipment consisted of dark green painted electric multiple unit cars built at the Reading's own shops. Some of the cars were rebuilt during the 1960s receiving air conditioning, refreshed interior and a new blue paint scheme resulting in their being referred to as "Blueliners". Today, the line uses the Silverliner family of EMU cars which operate throughout SEPTA's Regional Rail system.[2]
Service to Bethlehem and the Lehigh Valley languished due to the post-World War II surge of the automobile as well as the opening of the Pennsylvania Turnpike Northeast Extension in 1957. Service north of Lansdale in the non-electrified territory was terminated by SEPTA on July 29, 1981.[2] Trackage north of Quakertown was dismantled after the railbed was leased for use as the interim Saucon Rail Trail.
Between 1984–2010 the route was designated R5 Doylestown and R5 Lansdale as part of SEPTA's diametrical reorganization of its lines. Lansdale and Doylestown trains operated through the city center to the Paoli Line on the ex-Pennsylvania side of the system.[3] The R-number naming system was dropped on July 25, 2010.[4]
On August 29, 2011, SEPTA adjusted the midday service pattern to encourage ridership at Colmar station, which had available parking capacity immediately adjacent to Pennsylvania Route 309. Previously, every other train turned back at Lansdale; those trains now call at Colmar before terminating at Link Belt, providing half-hourly service at Colmar between the morning and afternoon rush hours.[5]
On December 18, 2011, SEPTA eliminated weekend service at Link Belt and New Britain due to low ridership.
A large parking garage is to be built at Lansdale station. 9th Street station opened nearby on November 15, 2015 as an alternate parking location during construction; it will remain open afterwards to as part of planned transit-oriented development.[6]
SEPTA activated positive train control on the Lansdale/Doylestown Line from Doylestown to Glenside on June 13, 2016. Positive train control was activated from Glenside to Fern Rock on December 12, 2016 and from Fern Rock to 30th Street on January 9, 2017.[7]
Stations
The Lansdale/Doylestown Line makes the following station stops after leaving the Center City Commuter Connection; stations indicated with italics are closed. Weekday boardings are from FY 2013; data for stations between Temple University and Glenside include all lines serving those stations.[1]: 95–96
Zone | Milepost | Station | Boardings | City/Township | County | Connections |
---|---|---|---|---|---|---|
C | 2.1 | Temple University | 3,028 | Philadelphia | Philadelphia | All SEPTA Regional Rail lines |
1 | 2.9 | North Broad | 103 | |||
5.1 | Wayne Junction | 527 | ||||
7.3 | Fern Rock Transportation Center | 825 | ||||
2 | 8.4 | Melrose Park | 458 | Cheltenham | Montgomery | |
9.2 | Elkins Park | 632 | ||||
3 | 10.8 | Jenkintown-Wyncote | 1,998 | Cheltenham/Jenkintown | ||
11.9 | Glenside | 1,064 | Cheltenham | |||
13.0 | North Hills | 202 | Abington | |||
13.9 | Oreland | 276 | Springfield | |||
-- | Fellwick | Whitemarsh | ||||
15.9 | Fort Washington | 1,108 | ||||
17.3 | Ambler | 1,017 | Ambler | |||
18.8 | Penllyn | 216 | Lower Gwynedd | |||
20.0 | Gwynedd Valley | 210 | ||||
4 | 22.4 | North Wales | 790 | North Wales | ||
23.5 | Pennbrook | 467 | Lansdale | |||
24.4 | Lansdale | 1,396 | ||||
25.0 | 9th Street | [note 1] | ||||
25.9 | Fortuna | 60 | Hatfield | |||
26.8 | Colmar | 370 | ||||
27.5 | Link Belt | 46 | ||||
29.7 | Chalfont | 136 | Chalfont | Bucks | ||
31.5 | New Britain | 51 | New Britain | |||
32.8 | Delaware Valley College | 68 | Doylestown Township | |||
34.4 | Doylestown | 383 | Doylestown |
Ridership
Between FY 2008–FY 2014 yearly ridership on the Lansdale/Doylestown Line has held steady at 4.6 million, save for a brief dip to 4.3 million in FY 2010–2011.[1]: 94 [8][9][10][11][12][13]
Notes
References
- ^ a b c "Fiscal Year 2016 Annual Service Plan" (PDF). SEPTA. June 2015. Retrieved August 13, 2016.
- ^ a b c Williams, Gerry (1998). Trains, Trolleys & Transit: A Guide to Philadelphia Area Rail Transit. Piscataway, New Jersey: Railpace Company. pp. 80–83. ISBN 978-0-9621541-7-1.
- ^ Vuchic, Vukan; Kikuchi, Shinya (1984). General Operations Plan for the SEPTA Regional High Speed System. Philadelphia: SEPTA. pp. 2–8.
- ^ Lustig, David (November 2010). "SEPTA makeover". Trains Magazine. Kalmbach Publishing: 26.
- ^ "SEPTA adds more Colmar stops". September 1, 2011. Retrieved December 11, 2011.
- ^ a b "9th Street Station". Southeastern Pennsylvania Transportation Authority. Retrieved 1 November 2015.
- ^ "Positive Train Control Update". SEPTA. May 1, 2017. Retrieved May 17, 2017.
- ^ "Fiscal Year 2015 Annual Service Plan" (PDF). SEPTA. May 2014. p. 60. Retrieved August 13, 2016.
- ^ "Fiscal Year 2014 Annual Service Plan" (PDF). SEPTA. May 2013. p. 44. Retrieved August 13, 2016.
- ^ "Fiscal Year 2013 Annual Service Plan" (PDF). SEPTA. May 2012. p. 55. Retrieved August 13, 2016.
- ^ "Fiscal Year 2012 Annual Service Plan" (PDF). SEPTA. July 2011. p. 94. Retrieved August 13, 2016.
- ^ "Fiscal Year 2011 Annual Service Plan" (PDF). SEPTA. June 2010. p. 70. Retrieved August 13, 2016.
- ^ "FY 2010 Annual Service Plan" (PDF). SEPTA. June 2009. p. 63. Retrieved August 13, 2016.