|Linear Perspective: Brunelleschi's Experiment, Smarthistory|
|How One-Point Linear Perspective Works, Smarthistory|
|Empire of the Eye: The Magic of Illusion: The Trinity-Masaccio, Part 2, National Gallery of Art|
Perspective (from Latin: perspicere 'to see through') Linear or Point projection perspective is one of two types of Graphical projection perspective in the graphic arts (the other type is Parallel projection). Linear perspective is an approximate representation, generally on a flat surface (such as paper), of an image as it is seen by the eye. The most characteristic features of Linear perspective are that objects appear smaller as their distance from the observer increases; and that they are subject to foreshortening, meaning that an object's dimensions along the line of sight appear shorter than its dimensions across the line of sight. Also all objects will recede to points in the distance, usually along the horizon line, but also above and below the horizon line depending on view used.
Italian Renaissance painters and architects including Filippo Brunelleschi, Masaccio, Paolo Uccello, Piero della Francesca and Luca Pacioli studied linear perspective, wrote treatises on it, and incorporated it into their artworks, thus contributing to the mathematics of art.
Perspective works by representing the light that passes from a scene through an imaginary rectangle (realized as the plane of the painting), to the viewer's eye, as if a viewer were looking through a window and painting what is seen directly onto the windowpane. If viewed from the same spot as the windowpane was painted, the painted image would be identical to what was seen through the unpainted window. Each painted object in the scene is thus a flat, scaled down version of the object on the other side of the window. Because each portion of the painted object lies on the straight line from the viewer's eye to the equivalent portion of the real object it represents, the viewer sees no difference (sans depth perception) between the painted scene on the windowpane and the view of the real scene. All perspective drawings assume the viewer is a certain distance away from the drawing. Objects are scaled relative to that viewer. An object is often not scaled evenly: a circle often appears as an ellipse and a square can appear as a trapezoid. This distortion is referred to as foreshortening.
Perspective drawings have a horizon line, which is often implied. This line, directly opposite the viewer's eye, represents objects infinitely far away. They have shrunk, in the distance, to the infinitesimal thickness of a line. It is analogous to (and named after) the Earth's horizon.
Any perspective representation of a scene that includes parallel lines has one or more vanishing points in a perspective drawing. A one-point perspective drawing means that the drawing has a single vanishing point, usually (though not necessarily) directly opposite the viewer's eye and usually (though not necessarily) on the horizon line. All lines parallel with the viewer's line of sight recede to the horizon towards this vanishing point. This is the standard "receding railroad tracks" phenomenon. A two-point drawing would have lines parallel to two different angles. Any number of vanishing points are possible in a drawing, one for each set of parallel lines that are at an angle relative to the plane of the drawing.
Perspectives consisting of many parallel lines are observed most often when drawing architecture (architecture frequently uses lines parallel to the x, y, and z axes). Because it is rare to have a scene consisting solely of lines parallel to the three Cartesian axes (x, y, and z), it is rare to see perspectives in practice with only one, two, or three vanishing points; even a simple house frequently has a peaked roof which results in a minimum of six sets of parallel lines, in turn corresponding to up to six vanishing points.
Of the many types of perspective drawings, the most common categorizations of artificial perspective are one-, two- and three-point. The names of these categories refer to the number of vanishing points in the perspective drawing.
Aerial (or atmospheric) perspective depends on distant objects being more obscured by atmospheric factors, so farther objects are less visible to the viewer. In general, distant objects become lighter in daytime and darker at night as they recede. Aerial perspective can be combined with, but does not depend on, one or more vanishing points.
A drawing has one-point perspective when it contains only one vanishing point on the horizon line. This type of perspective is typically used for images of roads, railway tracks, hallways, or buildings viewed so that the front is directly facing the viewer. Any objects that are made up of lines either directly parallel with the viewer's line of sight or directly perpendicular (the railroad slats) can be represented with one-point perspective. These parallel lines converge at the vanishing point.
One-point perspective exists when the picture plane is parallel to two axes of a rectilinear (or Cartesian) scene—a scene which is composed entirely of linear elements that intersect only at right angles. If one axis is parallel with the picture plane, then all elements are either parallel to the picture plane (either horizontally or vertically) or perpendicular to it. All elements that are parallel to the picture plane are drawn as parallel lines. All elements that are perpendicular to the picture plane converge at a single point (a vanishing point) on the horizon.
A drawing has two-point perspective when it contains two vanishing points on the horizon line. In an illustration, these vanishing points can be placed arbitrarily along the horizon. Two-point perspective can be used to draw the same objects as one-point perspective, rotated: looking at the corner of a house, or at two forked roads shrinking into the distance, for example. One point represents one set of parallel lines, the other point represents the other. Seen from the corner, one wall of a house would recede towards one vanishing point while the other wall recedes towards the opposite vanishing point.
Two-point perspective exists when the painting plate is parallel to a Cartesian scene in one axis (usually the z-axis) but not to the other two axes. If the scene being viewed consists solely of a cylinder sitting on a horizontal plane, no difference exists in the image of the cylinder between a one-point and two-point perspective.
Two-point perspective has one set of lines parallel to the picture plane and two sets oblique to it. Parallel lines oblique to the picture plane converge to a vanishing point, which means that this set-up will require two vanishing points.
Three-point perspective is often used for buildings seen from above (or below). In addition to the two vanishing points from before, one for each wall, there is now one for how the vertical lines of the walls recede. For an object seen from above, this third vanishing point is below the ground. For an object seen from below, as when the viewer looks up at a tall building, the third vanishing point is high in space.
Three-point perspective exists when the perspective is a view of a Cartesian scene where the picture plane is not parallel to any of the scene's three axes. Each of the three vanishing points corresponds with one of the three axes of the scene. One, two and three-point perspectives appear to embody different forms of calculated perspective, and are generated by different methods. Mathematically, however, all three are identical; the difference is merely in the relative orientation of the rectilinear scene to the viewer.
By superimposing two perpendicular, curved sets of two-point perspective lines, a four-or-above-point curvilinear perspective can be achieved. This perspective can be used with a central horizon line of any orientation, and can depict both a worm's-eye and bird's-eye view at the same time.
Additionally, a central vanishing point can be used (just as with one-point perspective) to indicate frontal (foreshortened) depth.
Foreshortening is the visual effect or optical illusion that causes an object or distance to appear shorter than it actually is because it is angled toward the viewer. Additionally, an object is often not scaled evenly: a circle often appears as an ellipse and a square can appear as a trapezoid.
Although foreshortening is an important element in art where visual perspective is being depicted, foreshortening occurs in other types of two-dimensional representations of three-dimensional scenes. Some other types where foreshortening can occur include oblique parallel projection drawings. Foreshortening also occurs when imaging rugged terrain using a synthetic aperture radar system.
In painting, foreshortening in the depiction of the human figure was improved during the Italian Renaissance, and the Lamentation over the Dead Christ by Andrea Mantegna (1480s) is one of the most famous of a number of works that show off the new technique, which thereafter became a standard part of the training of artists.
Rudimentary attempts to create the illusion of depth were made in ancient times, with artists achieving isometric projection by the Middle Ages. Various early Renaissance works depict perspective lines with an implied convergence, albeit without a unifying vanishing point. The first to master perspective was Italian Renaissance architect Filippo Brunelleschi, who developed the adherence of perspective to a vanishing point in the early fifteenth century. His discovery was immediately influential on subsequent Renaissance art and was explored contemporaneously in manuscripts by Leon Battista Alberti, Piero della Francesca and others.
The earliest art paintings and drawings typically sized many objects and characters hierarchically according to their spiritual or thematic importance, not their distance from the viewer, and did not use foreshortening. The most important figures are often shown as the highest in a composition, also from hieratic motives, leading to the so-called "vertical perspective", common in the art of Ancient Egypt, where a group of "nearer" figures are shown below the larger figure or figures; simple overlapping was also employed to relate distance. Additionally, oblique foreshortening of round elements like shields and wheels is evident in Ancient Greek red-figure pottery. By the first century BC, some Ancient Greek paintings included isometric projection or generally converging lines without a consistent vanishing point.[a] First century Roman frescoes have been found which use multiple vanishing points in a systematic but not fully consistent manner.
Systematic attempts to evolve a system of perspective are usually considered to have begun around the fifth century BC in the art of ancient Greece, as part of a developing interest in illusionism allied to theatrical scenery. This was detailed within Aristotle's Poetics as skenographia: using flat panels on a stage to give the illusion of depth. The philosophers Anaxagoras and Democritus worked out geometric theories of perspective for use with skenographia. Alcibiades had paintings in his house designed using skenographia, so this art was not confined merely to the stage. Euclid in his Optics (c. 300 BC) argues correctly that the perceived size of an object is not related to its distance from the eye by a simple proportion.
Chinese artists made use of oblique projection from the first or second century until the 18th century. It is not certain how they came to use the technique; some authorities suggest that the Chinese acquired the technique from India, which acquired it from Ancient Rome. Oblique projection is also seen in Japanese art, such as in the Ukiyo-e paintings of Torii Kiyonaga (1752–1815).[b]
Various paintings and drawings from the Middle Ages show amateur attempts at projections of objects, where parallel lines are successfully represented in isometric projection, or by nonparallel ones without a vanishing point.
By the later periods of antiquity, artists, especially those in less popular traditions, were well aware that distant objects could be shown smaller than those close at hand for increased realism, but whether this convention was actually used in a work depended on many factors. Some of the paintings found in the ruins of Pompeii show a remarkable realism and perspective for their time. It has been claimed that comprehensive systems of perspective were evolved in antiquity, but most scholars do not accept this. Hardly any of the many works where such a system would have been used have survived. A passage in Philostratus suggests that classical artists and theorists thought in terms of "circles" at equal distance from the viewer, like a classical semi-circular theatre seen from the stage. The roof beams in rooms in the Vatican Virgil, from about 400 AD, are shown converging, more or less, on a common vanishing point, but this is not systematically related to the rest of the composition. In the Late Antique period use of perspective techniques declined. The art of the new cultures of the Migration Period had no tradition of attempting compositions of large numbers of figures and Early Medieval art was slow and inconsistent in relearning the convention from classical models, though the process can be seen underway in Carolingian art.
Medieval artists in Europe, like those in the Islamic world and China, were aware of the general principle of varying the relative size of elements according to distance, but even more than classical art was perfectly ready to override it for other reasons. Buildings were often shown obliquely according to a particular convention. The use and sophistication of attempts to convey distance increased steadily during the period, but without a basis in a systematic theory. Byzantine art was also aware of these principles, but also used the reverse perspective convention for the setting of principal figures.
Ambrogio Lorenzetti painted a floor using a rudimentary vanishing point in his Presentation at the Temple (1342). However the rest of the painting is not consistent with the perspective of the floor. Other artists of the greater proto-Renaissance, such as Melchior Broederlam, strongly anticipated modern perspective in their works but lacked the constraint of a vanishing point.
Renaissance: mathematical basis
Filippo Brunelleschi conducted a series of experiments between 1415 and 1420, which included making drawings of various Florentine buildings in correct perspective. According to Vasari and others, in about 1420, Brunelleschi demonstrated his discovery by having people look through a hole in the back of a painting he had made. Through it, they would see a building such as the Florence Baptistery. When Brunelleschi lifted a mirror in front of the viewer, it reflected his painting of the buildings which had been seen previously, so that the vanishing point was perfectly centered from the perspective of the participant. To the viewer, the painting of the Baptistery and the building itself were nearly indistinguishable.
Soon after, nearly every artist in Florence and in Italy used geometrical perspective in their paintings, notably Paolo Uccello, Masolino da Panicale, Lorenzo Ghiberti, and Donatello. Perspective can be seen in Donatello's The Feast of Herod, as well as in elaborate checkerboard floors sculpted beneath the simple manger portrayed in the birth of Christ. Although anachronistic, these floors demonstrate geometrical perspective, with the rate at which the horizontal lines recede into the distance graphically determined. This became an integral part of Quattrocento art. Melozzo da Forlì first used the technique of upward foreshortening (in Rome, Loreto, Forlì and others), and was celebrated for that. Not only was perspective a way of showing depth, it was also a new method of composing a painting. Paintings began to show a single, unified scene, rather than a combination of several.
As shown by the quick proliferation of accurate perspective paintings in Florence, Brunelleschi likely understood (with help from his friend the mathematician Toscanelli), but did not publish, the mathematics behind perspective. Decades later, his friend Leon Battista Alberti wrote De pictura (1435/1436), a treatise on proper methods of showing distance in painting. Alberti's primary breakthrough was not to show the mathematics in terms of conical projections, as it actually appears to the eye. Instead, he formulated the theory based on planar projections, or how the rays of light, passing from the viewer's eye to the landscape, would strike the picture plane (the painting). He was then able to calculate the apparent height of a distant object using two similar triangles. The mathematics behind similar triangles is relatively simple, having been long ago formulated by Euclid. In viewing a wall, for instance, the first triangle has a vertex at the user's eye, and vertices at the top and bottom of the wall. The bottom of this triangle is the distance from the viewer to the wall. The second, similar triangle, has a point at the viewer's eye, and has a length equal to the viewer's eye from the painting. The height of the second triangle can then be determined through a simple ratio, as proven by Euclid. Alberti was also trained in the science of optics through the school of Padua and under the influence of Biagio Pelacani da Parma who studied Alhazen's Book of Optics  Alhazen's Book of Optics, translated around 1200 into Latin, laid the mathematical foundation for perspective in Europe.
Piero della Francesca elaborated on De pictura in his De Prospectiva pingendi in the 1470s, making many references to Euclid. Alberti had limited himself to figures on the ground plane and giving an overall basis for perspective. Della Francesca fleshed it out, explicitly covering solids in any area of the picture plane. Della Francesca also started the now common practice of using illustrated figures to explain the mathematical concepts, making his treatise easier to understand than Alberti's. Della Francesca was also the first to accurately draw the Platonic solids as they would appear in perspective. Luca Pacioli's 1509 Divina proportione (Divine Proportion), illustrated by Leonardo da Vinci, summarizes the use of perspective in painting, including much of Della Francesca's treatise. Leonardo applied one-point perspective as well as shallow focus to some of his works.
Perspective remained, for a while, the domain of Florence. Jan van Eyck, among others, was unable to create a consistent structure for the converging lines in paintings, as in Arnolfini Portrait, because he was unaware of the theoretical breakthrough just then occurring in Italy. However he achieved very subtle effects by manipulations of scale in his interiors. Gradually, and partly through the movement of academies of the arts, the Italian techniques became part of the training of artists across Europe, and later other parts of the world.
Two-point perspective was demonstrated as early as 1525 by Albrecht Dürer, who studied perspective by reading Piero and Pacioli's works, in his Unterweisung der messung ("Instruction of the measurement").
The culmination of these Renaissance traditions finds its ultimate synthesis in the research of the 17th-century architect, geometer, and optician Girard Desargues on perspective, optics and projective geometry. Further advances in projective geometry in the 19th and 20th centuries contributed to the development of analytic geometry, algebraic geometry, relativity and quantum mechanics.
Present: computer graphics
3-D computer games and ray-tracers often use a modified version of perspective. Like the painter, the computer program is generally not concerned with every ray of light that is in a scene. Instead, the program simulates rays of light traveling backwards from the monitor (one for every pixel), and checks to see what it hits. In this way, the program does not have to compute the trajectories of millions of rays of light that pass from a light source, hit an object, and miss the viewer.[dubious ]
CAD software, and some computer games (especially games using 3-D polygons) use linear algebra, and in particular matrix multiplication, to create a sense of perspective. The scene is a set of points, and these points are projected to a plane (computer screen)[dubious ] in front of the view point (the viewer's eye). The problem of perspective is simply finding the corresponding coordinates on the plane corresponding to the points in the scene. By the theories of linear algebra, a matrix multiplication directly computes the desired coordinates, thus bypassing any descriptive geometry theorems used in perspective drawing.[dubious ]
Perspective images are calculated assuming a particular vanishing point. In order for the resulting image to appear identical to the original scene, a viewer of the perspective must view the image from the exact vantage point used in the calculations relative to the image. This cancels out what would appear to be distortions in the image when viewed from a different point. These apparent distortions are more pronounced away from the center of the image as the angle between a projected ray (from the scene to the eye) becomes more acute relative to the picture plane. In practice, unless the viewer chooses an extreme angle, like looking at it from the bottom corner of the window, the perspective normally looks more or less correct. This is referred to as "Zeeman's Paradox". It has been suggested that a drawing in perspective still seems to be in perspective at other spots because we still perceive it as a drawing, because it lacks depth of field cues.
For a typical perspective, however, the field of view is narrow enough (often only 60 degrees) that the distortions are similarly minimal enough that the image can be viewed from a point other than the actual calculated vantage point without appearing significantly distorted. When a larger angle of view is required, the standard method of projecting rays onto a flat picture plane becomes impractical. As a theoretical maximum, the field of view of a flat picture plane must be less than 180 degrees (as the field of view increases towards 180 degrees, the required breadth of the picture plane approaches infinity).
To create a projected ray image with a large field of view, one can project the image onto a curved surface. To have a large field of view horizontally in the image, a surface that is a vertical cylinder (i.e., the axis of the cylinder is parallel to the z-axis) will suffice (similarly, if the desired large field of view is only in the vertical direction of the image, a horizontal cylinder will suffice). A cylindrical picture surface will allow for a projected ray image up to a full 360 degrees in either the horizontal or vertical dimension of the perspective image (depending on the orientation of the cylinder). In the same way, by using a spherical picture surface, the field of view can be a full 360 degrees in any direction (note that for a spherical surface, all projected rays from the scene to the eye intersect the surface at a right angle).
Just as a standard perspective image must be viewed from the calculated vantage point for the image to appear identical to the true scene, a projected image onto a cylinder or sphere must likewise be viewed from the calculated vantage point for it to be precisely identical to the original scene. If an image projected onto a cylindrical surface is "unrolled" into a flat image, different types of distortions occur. For example, many of the scene's straight lines will be drawn as curves. An image projected onto a spherical surface can be flattened in various ways:
- An image equivalent to an unrolled cylinder
- A portion of the sphere can be flattened into an image equivalent to a standard perspective
- An image similar to a fisheye photograph
- "Linear Perspective: Brunelleschi's Experiment". Smarthistory at Khan Academy. Archived from the original on 24 May 2013. Retrieved 12 May 2013.
- "How One-Point Linear Perspective Works". Smarthistory at Khan Academy. Archived from the original on 13 July 2013. Retrieved 12 May 2013.
- "Empire of the Eye: The Magic of Illusion: The Trinity-Masaccio, Part 2". National Gallery of Art at ArtBabble. Archived from the original on 1 May 2013. Retrieved 12 May 2013.
- D'Amelio, Joseph (2003). Perspective Drawing Handbook. Dover. p. 19.
- McKinley, Richard. "What Is Aerial Perspective?". Artists Network. Retrieved 14 September 2019.
- "The Beginner's Guide to Perspective Drawing". The Curiously Creative. Retrieved 17 August 2019.
- Calvert, Amy. "Egyptian Art (article) | Ancient Egypt". Khan Academy. Retrieved 14 May 2020.
- Regoli, Gigetta Dalli; Gioseffi, Decio; Mellini, Gian Lorenzo; Salvini, Roberto (1968). Vatican Museums: Rome. Italy: Newsweek. p. 22.
- Carla Hurt, Romans paint better perspective than Renaissance artists, August 9, 2013
- "Skenographia in Fifth Century". CUNY. Archived from the original on 17 December 2007. Retrieved 27 December 2007.
- Smith, A. Mark (1999). Ptolemy and the Foundations of Ancient Mathematical Optics: A Source Based Guided Study. Philadelphia: American Philosophical Society. p. 57. ISBN 978-0-87169-893-3.
- Cucker, Felix (2013). Manifold Mirrors: The Crossing Paths of the Arts and Mathematics. Cambridge University Press. pp. 269–278. ISBN 978-0-521-72876-8.
Dubery and Willats (1983:33) write that 'Oblique projection seems to have arrived in China from Rome by way of India round about the first or second century AD.'Figure 10.9 [Wen-Chi returns home, anon, China, 12th century] shows an archetype of the classical use of oblique perspective in Chinese painting.
- "Pompeii. House of the Vettii. Fauces and Priapus". SUNY Buffalo. Archived from the original on 24 December 2007. Retrieved 27 December 2007.
- Panofsky, Erwin (1960). Renaissance and Renascences in Western Art. Stockholm: Almqvist & Wiksell. p. 122, note 1. ISBN 0-06-430026-9.
- Vatican Virgil image
- Heidi J. Hornik and Mikeal Carl Parsons, Illuminating Luke: The infancy narrative in Italian Renaissance painting, p. 132
- Gärtner, Peter (1998). Brunelleschi (in French). Cologne: Konemann. p. 23. ISBN 3-8290-0701-9.
- "Archived copy". Archived from the original on September 27, 2007. Retrieved March 12, 2007.CS1 maint: archived copy as title (link)
- "...and these works (of perspective by Brunelleschi) were the means of arousing the minds of the other craftsmen, who afterwards devoted themselves to this with great zeal."
Vasari's Lives of the Artists Chapter on Brunelleschi
- "Messer Paolo dal Pozzo Toscanelli, having returned from his studies, invited Filippo with other friends to supper in a garden, and the discourse falling on mathematical subjects, Filippo formed a friendship with him and learned geometry from him."
Vasarai's Lives of the Artists, Chapter on Brunelleschi
- El-Bizri, Nader (2010). "Classical Optics and the Perspectiva Traditions Leading to the Renaissance". In Hendrix, John Shannon; Carman, Charles H. (eds.). Renaissance Theories of Vision (Visual Culture in Early Modernity). Farnham, Surrey: Ashgate. pp. 11–30. ISBN 1-409400-24-7.
- Hans, Belting (2011). Florence and Baghdad: Renaissance art and Arab science (1st English ed.). Cambridge, Massachusetts: Belknap Press of Harvard University Press. pp. 90–92. ISBN 9780674050044. OCLC 701493612.
- Livio, Mario (2003). The Golden Ratio. New York: Broadway Books. p. 126. ISBN 0-7679-0816-3.
- O'Connor, J. J.; Robertson, E. F. (July 1999). "Luca Pacioli". University of St Andrews. Archived from the original on 22 September 2015. Retrieved 23 September 2015.
- Goldstein, Andrew M. (17 November 2011). "The Male "Mona Lisa"?: Art Historian Martin Kemp on Leonardo da Vinci's Mysterious "Salvator Mundi"". Blouin Artinfo.
- MacKinnon, Nick (1993). "The Portrait of Fra Luca Pacioli". The Mathematical Gazette. 77 (479): 206. doi:10.2307/3619717.
- Mathographics by Robert Dixon New York: Dover, p. 82, 1991.
- "...the paradox is purely conceptual: it assumes we view a perspective representation as a retinal simulation, when in fact we view it as a two dimensional painting. In other words, perspective constructions create visual symbols, not visual illusions. The key is that paintings lack the depth of field cues created by binocular vision; we are always aware a painting is flat rather than deep. And that is how our mind interprets it, adjusting our understanding of the painting to compensate for our position."
"Archived copy". Archived from the original on 6 January 2007. Retrieved 25 December 2006.CS1 maint: archived copy as title (link) Retrieved on 25 December 2006
- Andersen, Kirsti (2007). The Geometry of an Art: The History of the Mathematical Theory of Perspective from Alberti to Monge. Springer.
- Damisch, Hubert (1994). The Origin of Perspective, Translated by John Goodman. Cambridge, Massachusetts: MIT Press.
- Hyman, Isabelle, comp (1974). Brunelleschi in Perspective. Englewood Cliffs, New Jersey: Prentice-Hall.
- Kemp, Martin (1992). The Science of Art: Optical Themes in Western Art from Brunelleschi to Seurat. Yale University Press.
- Pérez-Gómez, Alberto, and Pelletier, Louise (1997). Architectural Representation and the Perspective Hinge. Cambridge, Massachusetts: MIT Press.
- Vasari, Giorgio (1568). The Lives of the Artists. Florence, Italy.
- Gill, Robert W (1974). Perspective From Basic to Creative. Australia: Thames & Hudson.
|Wikimedia Commons has media related to Perspective drawings.|
|Wikimedia Commons has media related to Evolution of Perspective.|
- A tutorial covering many examples of linear perspective
- Teaching Perspective in Art and Mathematics through Leonardo da Vinci's Work at Mathematical Association of America
- Perspective in Ancient Roman-Wall Painting at Southampton Solent University
- How to Draw a Two Point Perspective Grid at Creating Comics