Pentium 4: Difference between revisions
Tag: repeating characters |
|||
Line 28: | Line 28: | ||
Pentium 4 CPUs introduced the [[SSE2]] and, in the Prescott-based Pentium 4s, [[SSE3]] [[instruction set]]s to accelerate calculations, transactions, media processing, 3D graphics, and games. Later versions featured [[Hyper-threading|Hyper-Threading Technology]] (HTT), a feature to make one physical CPU work as two logically CPUs. Intel also marketed a version of their low-end [[Celeron]] processors based on the NetBurst microarchitecture (often referred to as ''Celeron 4''), and a high-end derivative, [[Xeon]], intended for [[multiprocessor]] [[Server (computing)|server]]s and [[workstation]]s. In 2005, the Pentium 4 was complemented by the [[Pentium D]] and [[Pentium Extreme Edition]] dual-core CPUs. |
Pentium 4 CPUs introduced the [[SSE2]] and, in the Prescott-based Pentium 4s, [[SSE3]] [[instruction set]]s to accelerate calculations, transactions, media processing, 3D graphics, and games. Later versions featured [[Hyper-threading|Hyper-Threading Technology]] (HTT), a feature to make one physical CPU work as two logically CPUs. Intel also marketed a version of their low-end [[Celeron]] processors based on the NetBurst microarchitecture (often referred to as ''Celeron 4''), and a high-end derivative, [[Xeon]], intended for [[multiprocessor]] [[Server (computing)|server]]s and [[workstation]]s. In 2005, the Pentium 4 was complemented by the [[Pentium D]] and [[Pentium Extreme Edition]] dual-core CPUs. |
||
bgbggbbgbg |
|||
==Microarchitecture== |
|||
In benchmark evaluations, the advantages of the [[NetBurst (microarchitecture)|NetBurst microarchitecture]] were not clear. With carefully optimized application code, the first Pentium 4s did outperform Intel's fastest Pentium III (clocked at 1.13 GHz at the time), as expected. But in [[legacy system|legacy applications]] with many branching or [[x87]] [[floating point|floating-point]] instructions, the Pentium 4 would merely match or even fall behind its predecessor. Its main handicap was a shared unidirectional bus. Furthermore, the NetBurst microarchitecture gave off more heat than any previous Intel or [[AMD]] microarchitectures. |
|||
As a result, the Pentium 4's introduction was met with mixed reviews: Developers disliked the Pentium 4, as it posed a new set of [[Optimization (computer science)|code optimization]] rules. For example, in mathematical applications AMD's lower-clocked [[Athlon]] (the fastest-clocked model was clocked at 1.2 GHz at the time) easily outperformed the Pentium 4, which would only catch up if software were re-compiled with [[SSE2]] support. Tom Yager of ''Infoworld'' magazine called it "the fastest CPU - for programs that fit entirely in cache". Computer-savvy buyers avoided Pentium 4 PCs due to their price-premium and questionable benefit. In terms of product marketing, the Pentium 4's singular emphasis on clock frequency (above all else) made it a marketer's dream. The result of this was that the NetBurst microarchitecture was often referred to as a [[marchitecture]] by various computing websites and publications during the life of the Pentium 4. |
|||
The two classical metrics of CPU performance are IPC (instructions per cycle) and clock speed. While IPC is difficult to quantify (due to dependence on the [[benchmark (computing)|benchmark]] application's instruction mix), clock speed is a simple measurement yielding a single absolute number. Unsophisticated buyers would simply consider the processor with the highest clock speed to be the best product, and the Pentium 4 was the undisputed megahertz champion. As AMD was unable to compete by these rules, it countered Intel's marketing advantage with the "[[megahertz myth]]" campaign. AMD product marketing used a "PR-rating" system, which assigned a merit value based on relative performance to a baseline machine. |
|||
[[Image:Pentium 4-2,4GHz.JPG|right|thumb|180px|A Pentium 4, clocked at 2.4 GHz]] |
|||
At the launch of the Pentium 4, Intel stated NetBurst-based processors were expected to scale to 10 GHz (which should be achieved over several [[Semiconductor fabrication|fabrication process]] generations). However, the NetBurst microarchitecture ultimately hit a frequency ceiling far below that expectation – the fastest clocked NetBurst-based models reached a peak clock speed of 3.8 GHz. Intel had not anticipated a rapid upward scaling of transistor power leakage that began to occur as the die reached the 90 nm lithography and smaller. This new power leakage phenomenon, along with the standard thermal output, created cooling and clock scaling problems as clock speeds increased. Reacting to these unexpected obstacles, Intel attempted several core redesigns ("[[Pentium 4#Prescott|Prescott]]" most notably) and explored new manufacturing technologies, such as using multiple cores, increasing FSB speeds, increasing the cache size, and using a shorter, more efficient instruction pipeline along with lower clock speeds. Nothing solved their problems though and in 2003–05 Intel shifted development away from NetBurst to focus on the cooler-running [[Pentium M (microarchitecture)|Pentium M microarchitecture]]. On January 5, 2006, Intel launched the Core processors, which put greater emphasis on energy efficiency and performance per clock. The final NetBurst-derived products were released in 2007, with all subsequent product families switching exclusively to the Core microarchitecture. The NetBurst architecture was often affectionately referred to as NetBust. {{Citation needed|date=October 2010}} |
|||
==Processor cores== |
==Processor cores== |
Revision as of 01:05, 3 May 2011
File:Pentium4ds.jpg | |
General information | |
---|---|
Launched | 2000 |
Discontinued | 2008 |
Common manufacturer |
|
Performance | |
Max. CPU clock rate | 1.3 GHz to 3.8 GHz |
FSB speeds | 400 MT/s to 1066 MT/s |
Architecture and classification | |
Technology node | 180 nm to 65 nm |
Microarchitecture | NetBurst |
Instruction set | x86 (i386), x86-64, MMX, SSE, SSE2, SSE3 |
Physical specifications | |
Sockets | |
Products, models, variants | |
Core names |
|
The Pentium 4 brand refers to Intel's line of single-core desktop and laptop central processing units (CPUs) introduced on November 20, 2000[1] and shipped through August 8, 2008.[2] They had the 7th-generation x86 microarchitecture, called NetBurst, which was the company's first all-new design since introduction of P6 microarchitecture of the Pentium Pro CPUs in 1995. NetBurst differed from the preceding P6 (Pentium III, II, etc.) by featuring a very deep instruction pipeline to achieve very high clock speeds[3] (up to 3.8 GHz) limited only by TDPs reaching up to 115 W in 3.4 GHz –3.8 GHz Prescott and Prescott 2M cores.[4] In 2004, the initial 32-bit x86 instruction set of the Pentium 4 microprocessors was extended by the 64-bit x86-64 set.
The first Pentium 4 cores, codenamed Willamette, were clocked from 1.3 GHz to 2 GHz and the first Willamette processor was released on November 20, 2000 using Socket 423. Notable with the introduction of the Pentium 4 was the 400 MHz FSB. It actually operated at 100 MHz but the FSB was quad-pumped, meaning that the maximum transfer rate was four times the base clock of the bus, so it was considered to run at 400 MHz. The AMD Athlon's double-pumped FSB was running at 200 MHz or 266 MHz at that time.
Pentium 4 CPUs introduced the SSE2 and, in the Prescott-based Pentium 4s, SSE3 instruction sets to accelerate calculations, transactions, media processing, 3D graphics, and games. Later versions featured Hyper-Threading Technology (HTT), a feature to make one physical CPU work as two logically CPUs. Intel also marketed a version of their low-end Celeron processors based on the NetBurst microarchitecture (often referred to as Celeron 4), and a high-end derivative, Xeon, intended for multiprocessor servers and workstations. In 2005, the Pentium 4 was complemented by the Pentium D and Pentium Extreme Edition dual-core CPUs.
bgbggbbgbg
Processor cores
The Pentium 4 has an integrated heat spreader (IHS) that prevents the die from accidentally getting damaged when mounting and unmounting cooling solutions. Prior to the IHS, a CPU shim was sometimes used by people worried about damaging the core. Overclockers sometimes removed the IHS on Socket 423 and Socket 478 chips to allow for more direct heat transfer. However, on processors using the Socket LGA 775 (Socket T) interface, the IHS is directly soldered to the die(s), meaning that the IHS cannot be easily removed.
Intel Pentium 4 processor family | |||||||
---|---|---|---|---|---|---|---|
Desktop | Laptop | ||||||
Code-named | Core | Date released | Code-named | Core | Date released | ||
Willamette Northwood Prescott |
180 nm 130 nm 90 nm |
Nov 2000 Jan 2002 Mar 2004 |
Northwood | 130 nm | Jun 2003 | ||
Northwood Pentium 4-M |
130 nm | Apr 2002 | |||||
Hyper-threading (HT) | |||||||
Northwood Prescott Prescott 2M Cedar Mill |
130 nm 90 nm 90 nm 65 nm |
May 2003 Feb 2004 Feb 2005 Jan 2006 |
Northwood Prescott |
130 nm 90 nm |
Sep 2003 Jun 2004 | ||
Gallatin XE Prescott 2M XE |
130 nm 90 nm |
Sep 2003 Feb 2005 |
|||||
List of Intel Pentium 4 microprocessors |
Willamette
[[Image:KL Intel Pentium 4 Wilamette.jpg|right|thumbhmhLal Shimpi | publisher=Anandtech | date=November 20, 2000}}</ref> Although introduced at prices of $644 (1.4 GHz) and mhm
Northwood
[[File:Pentium 4 Northwood SL6SH.jpg|right|thumb|180px|A 'Northwood' core Pentium 4 processor. Left the die, and right the heat spreader]] In October 2001, the Athlon XP regained a clear lead for AMD. In January 2002 Intel released Pentium 4s with a new core code named "Northwood" at speeds of 1.6 GHz, 1.8 GHz, 2 GHz and 2.2 GHz.[5][6] Northwood (product code 80532) combined an increase in the L2 cache size from 256 KB to 512 KB (increasing the transistor count from 42 million to 55 million) with a transition to a new 130 nm fabrication process.[6] By making the processor out of smaller transistors, processors can run at higher clock speeds or at the same speed while producing less heat. In the same month boards utilizing the 845 chipset were released with enabled support for DDR SDRAM which provided double the bandwidth of PC133 SDRAM, and alleviated the associated high costs of using Rambus RDRAM for maximal performance with Pentium 4.[citation needed]
A 2.4 GHz Pentium 4 was released on April 2, 2002, and the bus speed increased from 400 MHz to 533 MHz for the 2.26 GHz, 2.4 GHz, and 2.53 GHz models in May, 2.66 GHz and 2.8 GHz models in August, and 3.06 GHz model in November. With Northwood, the Pentium 4 came of age. The battle for performance leadership remained competitive (as AMD introduced faster versions of the Athlon XP) but most observers agreed that the fastest-clocked Northwood-based Pentium 4 was usually ahead of its rival.[citation needed] This was particularly so in the summer of 2002, when AMD's changeover to its 130 nm production process did not help the initial "Thoroughbred A" revision Athlon XP CPUs to clock high enough to overcome the advantages of Northwood in the 2.4 to 2.8 GHz range.[7]
The 3.06 GHz Pentium 4 enabled Hyper-Threading Technology that was first supported in Foster-based Xeons. This began the convention of virtual processors (or virtual cores) under x86 by enabling multiple threads to be run at the same time on the same physical processor.[citation needed] By shuffling two (ideally differing) program instructions to simultaneously execute through a single physical processor core, the goal is to best utilize processor resources that would have otherwise been unused from the traditional approach of having these single instructions wait for each other to execute singularly through the core. This initial 3.06 GHz 533FSB Pentium 4 Hyper-Threading enabled processor was not branded as such.[citation needed] That would be reserved for the 800FSB variant known Pentium 4 HT.
On April 14, 2003, Intel officially launched the new Pentium 4 HT processor. This processor used a 800 MHz FSB, was clocked at 3 GHz, and had Hyper-Threading Technology (which is what the HT moniker represents).[8] This was meant to help the Pentium 4 better compete with AMD's Opteron line of processors. However, when the Opteron was launched, due to its server-oriented positioning motherboard manufacturers did not initially build motherboards with AGP as Opteron initially did not share a common socket with AMD's desktop processor line (Socket A). Because AGP was the primary graphics expansion port for desktop use, this oversight prevented the Opteron from encroaching from the server market and threaten the Pentium 4 desktop market. Meanwhile with the launch of the Athlon XP 3200+ in AMD's desktop line, AMD increased the Athlon XP's FSB speed from 333 MHz to 400 MHz, but it was not enough to hold off the new 3 GHz Pentium 4 HT.[9] The Pentium 4 HT's increase to a 200mhz quad-pumped bus (200x4=800Mhz effective) greatly helped to satisfy the bandwidth requirements the Netburst architecture desired for reaching optimal performance. While the Athlon XP architecture was less dependent on bandwidth, the bandwidth numbers reached by Intel were well out of range for the Athlon's EV6 bus. EV6 could have only been able to hypothetically achieve the same bandwidth numbers at speeds unreachable at the time. Intel's higher bandwidth proved useful in benchmarks for streaming operations[citation needed], and Intel marketing wisely capitalized on this as a tangible improvement over AMD's desktop processors[citation needed]. Northwood 2.4 GHz, 2.6 GHz and 2.8 GHz variants were released on May 21, 2003. A 3.2 GHz variant was launched on June 23, 2003 and the final 3.4 GHz version arrived on February 2, 2004.
Overclocking early stepping Northwood cores yielded a startling phenomenon. While core voltage increases past 1.7 V would often allow substantial additional gains in overclocking headroom, the processor would slowly become more unstable over time with a degradation in maximum stable clock speed before dying and becoming totally unusable. This became known as Sudden Northwood Death Syndrome (SNDS), which is caused by electromigration.[10]
Pentium 4-M
Also based on the Northwood core, the Mobile Intel Pentium 4 Processor - M[11] was released on April 23, 2002 and included Intel's SpeedStep and Deeper Sleep technologies. Intel's naming conventions made it difficult at the time of the processor's release to identify the processor model. There was the Pentium III mobile chip, the Mobile Pentium 4-M, the Mobile Pentium 4, and then just the Pentium M which itself was based on the Pentium III and significantly faster than the former three. Its TDP is about 35 watts in most applications. This lowered power consumption was due to lowered core voltage, and other features mentioned previously.
Unlike the desktop Pentium 4, the Pentium 4-M did not feature an integrated heat spreader (IHS), since it operates at a lower voltage. The lower voltage means lower power consumption, and in turn less heat. However, according to Intel specifications, the Pentium 4-M had a maximum thermal junction temperature rating of 100 degrees C, approximately 40 degrees higher than the desktop Pentium 4.
Mobile Pentium 4
The Mobile Intel Pentium 4 Processor[12] was released to address the problem of putting a full desktop Pentium 4 processor into a laptop, which some manufacturers were doing. The Mobile Pentium 4 used a 533 MHz FSB, following the desktop Pentium 4's evolution. Oddly, increasing the bus speed by 133 MHz (33 MHz core) caused a massive increase in TDPs, as mobile Pentium 4 processors gave off 59.8 W - 70 W of heat, with the Hyper-Threading variants giving off 66.1 W - 88 W. This allowed the mobile Pentium 4 to bridge the gap between the desktop Pentium 4 (giving off 115 W maximum), and the Pentium 4-M (giving off 35 W maximum).
Gallatin (Extreme Edition)
In September 2003, at the Intel Developer Forum, the Pentium 4 Extreme Edition (P4EE) was announced, just over a week before the launch of Athlon 64 and Athlon 64 FX. The design was mostly identical to Pentium 4 (to the extent that it would run in the same motherboards), but differed by an added 2 MB of level 3 cache. It shared the same Gallatin core as the Xeon MP, though in a Socket 478 form factor (as opposed to Socket 603 for the Xeon MP) and with an 800 MHz bus, twice as fast as that of the Xeon MP. An LGA 775 version is also available.
While Intel maintained that the Extreme Edition was aimed at gamers, critics viewed it as an attempt to steal the Athlon 64's launch thunder, nicknaming it the "Emergency Edition". With a price tag of $999, it was also referred to as the "Expensive Edition" or "Extremely Expensive".
The added cache generally resulted in a noticeable performance increase in most processor intensive applications. Multimedia encoding and certain games benefited the most, with the Extreme Edition outperforming the Pentium 4, and even the two Athlon 64 variants, although the lower price and more balanced performance of the Athlon 64 (particularly the non-FX version) led to it usually being seen as the better value proposition. Nonetheless, the Extreme Edition did achieve Intel's apparent aim, which was to prevent the Athlon 64 winning every single major benchmark over the existing Pentium 4s, which it would otherwise have done.
A slight performance increase was achieved in late 2004 by increasing the bus speed from 800 MHz to 1066 MHz, resulting in a 3.46 GHz Pentium 4 Extreme Edition. By most metrics, this was on a per-clock basis the fastest single-core NetBurst processor that was ever produced, even outperforming many of its successor chips (not counting the dual-core Pentium D). Afterwards, the Pentium 4 Extreme Edition was migrated to the Prescott core. The new 3.73 GHz Extreme Edition had the same features as a 6x0-sequence Prescott 2M, but with a 1066 MHz bus. In practice however, the 3.73 GHz Pentium 4 Extreme Edition almost always proved to be slower than the 3.46 GHz Pentium 4 Extreme Edition, which is most likely due to the lack of an L3 cache and the longer instruction pipeline. The only advantage the 3.73 GHz Pentium 4 Extreme Edition had over the 3.46 GHz Pentium 4 Extreme Edition was the ability to run 64-bit applications since all Gallatin-based Pentium 4 Extreme Edition processors lacked the Intel 64 instruction set.
Although never a particularly good seller, especially since it was released in a time when AMD were asserting near total dominance in the processor performance race, the Pentium 4 Extreme Edition established a new position within Intel's product line, that of an enthusiast oriented chip with the highest-end specifications offered by Intel chips, along with unlocked multipliers to allow for easier overclocking. In this role it has since been succeeded by the Pentium Extreme Edition (The Extreme version of the dual-core Pentium D), the Core 2 Extreme, and most recently, the Core i7.
Prescott
![]() |
![]() |
On February 1, 2004, Intel introduced a new core codenamed "Prescott". The core used a 90 nm process for the first time, which one analyst described as "a major reworking of the Pentium 4's microarchitecture—major enough that I am surprised Intel did not opt to call this processor the Pentium 5."[13] Despite this overhaul, the performance gains were inconsistent. Some programs benefited from Prescott's doubled cache and SSE3 instructions, whereas others were negatively impacted by its longer pipeline. The Prescott's microarchitecture allowed Prescott to be clocked at slightly higher rates, but not nearly as high as Intel had anticipated. (See Overclocking.) The fastest mass-produced Prescott-based Pentium 4s were clocked at 3.8 GHz. While Northwood ultimately achieved clock speeds 70% higher than Willamette, Prescott ultimately scaled just 12% beyond Northwood.
The "Prescott" Pentium 4 contains 125 million transistors and has a die area of 122 mm2.[14][15] It was fabricated in a 90 nm process with seven levels of copper interconnect.[15] The process has features such as strained silicon transistors and Low-K carbon-doped silicon oxide (CDO) dielectric, which is also known as organosilicate glass (OSG).[15] The Prescott was first fabricated at the D1C development fab and was later moved to F11X production fab.[15]
Originally, two Prescott lines were released: the E-series, with an 800 MHz FSB and Hyper-Threading support, and the low-end A-series, with a 533 MHz FSB and Hyper-Threading disabled. Intel eventually added XD Bit (eXecute Disable) and Intel 64 functionality to Prescott.
LGA 775 Prescott uses a rating system, labeling them as the 5xx series (Celeron Ds are the 3xx series, while Pentium Ms are the 7xx series). The LGA 775 version of the E-series uses model numbers 5x0 (520-560), and the LGA 775 version of the A-series uses model numbers 5x5 and 5x9 (505-519). The fastest, the 570J and 571, is clocked at 3.8 GHz. Plans to mass-produce a 4 GHz Pentium 4 were cancelled by Intel in favor of dual core processors, although some European retailers claimed to be selling a Pentium 4 580, clocked at 4 GHz.
The 5x0J series (and its low-end equivalent, the 5x5J and 5x9J series) introduced the XD Bit (eXecute Disable) or Execute Disabled Bit [1] to Intel's line of processors. This technology, introduced to the x86 line by AMD and called NX (No eXecute), can help prevent certain types of malicious code from exploiting a buffer overflow to get executed. Intel also released a series of Prescott supporting Intel 64, Intel's implementation of the x86-64 64-bit extensions to the x86 architecture. These were originally released as the F-series, and only sold to OEMs, but they were later renamed to the 5x1 series and sold to the general public. Two low-end Intel64-enabled Prescotts, based on the 5x5/5x9 series, were also released with model numbers 506 and 516. 5x0, 5x0J, and 5x1 series Prescott incorporates Hyper-Threading in order to speed up some processes that use multithreaded software, such as video editing. The 5x1 series also supports 64 bit computing.
Prescott would ultimately be the last codename within the NetBurst microarchitecture altogether. Its successor, the Pentium M, would pursue trends toward wider CPU microarchitecture and slower clock speeds would align with their process roadmap to reduce power and continue to increase performance. The little-funded Israeli design team that produced the Pentium M core took over this next microarchitecture iteration.[16] The Pentium M was launched to address the mobile Pentium 4's and Pentium 4-M's performance and heat output issues. While it was clocked at much slower speeds when compared to the mobile Pentium 4, it was significantly faster, clock for clock. For example, a 1.6 GHz Pentium M could have approximately the same performance of a 2.4 GHz mobile Pentium 4. While it was intended for use only in laptops, a few manufacturers made desktop motherboards that used the socket that the Pentium M supported.
Prescott 2M (Extreme Edition)
Intel, by the first quarter of 2005, released a new Prescott core with 6x0 numbering, codenamed "Prescott 2M". Prescott 2M is also sometimes known by the name of its Xeon derivative, "Irwindale". It features Intel 64, the XD Bit, EIST (Enhanced Intel SpeedStep Technology), Tm2 (for processors at 3.6 GHz and above), and 2 MB of L2 cache. However, any advantage introduced by the added cache is mostly negated due to higher cache latency, and the double word size if using Intel 64 mode. Rather than being a targeted speed boost the double size cache is intended to provide the same space and hence performance for 64-bit mode operations.
6xx series Prescott 2Ms have incorporated Hyper-Threading in order to speed up some processes that use multithreaded software, such as video editing.
On November 14, 2005, Intel released Prescott 2M processors with VT (Virtualization Technology, codenamed "Vanderpool") enabled. Intel only released two models of this Prescott 2M category: 662 and 672, running at 3.6 GHz and 3.8 GHz, respectively.
Cedar Mill
The final revision of the Pentium 4 was Cedar Mill, released on January 5, 2006. This was simply a straightforward die shrink of the Prescott-based 600 series core to 65 nm, with no real feature additions. Cedar Mill had a lower heat output than Prescott, with a TDP of 86 W. The Core Stepping of D0 in late 2006 reduced this to 65 watts. It has a 65 nm core and features a 31-stage pipeline (just like Prescott), 800 MHz FSB, Intel 64, Hyper-Threading and Virtualization Technology. As with Prescott 2M, Cedar Mill also has a 2 MB L2 cache. It was released as Pentium 6x1 and 6x3 (product code 80552) at frequencies from 3 GHz up to 3.6 GHz. Overclockers managed to exceed 8 GHz with these processors using liquid Nitrogen cooling.[17] None of the 6x1 range (631, 641, 651, and 661) has Virtualization Technology support. As of March 2007[update], it has not been possible to obtain 6x3, nor had Intel any records of this product line on their website.
To distinguish Cedar Mill cores from Prescott cores with the same features, Intel added 1 to their model numbers. Thus, Pentium 4 631, 641, 651 and 661 are 65 nm microprocessors, while Pentium 630, 640, 650 and 660 respectively are their 90 nm equivalents.
The name "Cedar Mill" refers to Cedar Mill, Oregon, a neighborhood near Intel's Hillsboro, Oregon facilities.
Successor
The original successor to the Pentium 4 was (codenamed) Tejas, which was scheduled for an early-mid-2005 release. However, it was cancelled a few months after the release of Prescott due to extremely high TDPs (a 2.8 GHz Tejas gave off 150 W of heat, compared to around 80 W for a Northwood of the same speed, and 100 W for a comparably clocked Prescott) and development on the NetBurst microarchitecture as a whole ceased, with the exception of the dual-core Pentium D and Pentium Extreme Edition and the Cedar Mill-based Pentium 4 HT.
Since May 2005, Intel has released dual-core processors based on the Pentium 4 under the names Pentium D and Pentium Extreme Edition. They represent Intel's shift towards parallelism and their intent was to eventually make the bulk of their main processor line multiple-core. These came under the code names Smithfield and Presler for the 90 nm and 65 nm parts respectively.
The ultimate successors to Pentium 4 are the Intel Core 2 processors using the "Conroe" core based upon the Core microarchitecture, released on July 27, 2006. Intel Core 2 processors have been released as single, dual and quad core processors. Single core counterparts are present in the Intel Core 2 line, primarily for the OEM market, while dual and quad core processors can be sold to retail and OEM.
mhgmtk r667r 7uytf fggh
Notes and references
- ^ "Intel Introduces The Pentium 4 Processor". Intel. Archived from the original on 2007-04-03. Retrieved 2007-08-14.
- ^ "Intel intros 3.0 GHz quad-core Xeon, drops Pentiums". TG Daily. Retrieved 2007-08-14.
- ^ "Intel Core 2 Extreme QX9650 45nm Quad Core CPU". PC Magazine. Retrieved 2007-10-30.
- ^ "The 65 nm Pentium D 900's Coming Out Party: Thermal Design Power Overview". Tom's Hardware. Retrieved 2007-06-15.
- ^ Wasson, Scott. AMD's Athlon XP 1800+ processor, Tech Report, October 9, 2001.
- ^ a b Wasson, Scott and Brown, Andrew. Pentium 4 'Northwood' 2.2 GHz vs. Athlon XP 2000+, January 7, 2002.
- ^ Wasson, Scott. AMD's Athlon XP 2800+ and NVIDIA's nForce2, Tech Report, October 1, 2002.
- ^ Wasson, Scott. Intel's Pentium 4 3.2 GHz processor, Tech Report, June 23, 2003.
- ^ Wasson, Scott. AMD's Athlon XP 3200+ processor, Tech Report, May 13, 2003.
- ^ Shilov, Anton. Sudden Overclocked Northwood Death Syndrome. Is It Strange That Overclocked CPUs Eventually Die?, X-bit Labs, December 6, 2002.
- ^ "Mobile Intel Pentium 4 Processor-M Datasheet". Intel Corp.
- ^ "Intel's Mobile Pentium 4". Intel Corp.
- ^ "Intel's Pentium 4 Prescott processor". The Tech Report. February 2, 2004. Retrieved 2007-08-28.
- ^ Intel's Pentium 4 Prescott processor - The Tech Report
- ^ a b c d Glaskowsky, Peter N. (2 February 2004). "Prescott Pushes Pipelining Limits". Microprocessor Report.
- ^ King, Ian (April 9, 2007). "How Israel saved Intel". The Seattle Times. Retrieved 2007-09-07.
- ^ "OC Team Italy sets a new world record at 8GHz". NordicHardware. January 22, 2007. Archived from the original on 2008-05-26. Retrieved 2008-01-11.