Traffic light

This article is about the traffic control device. For the type of political coalition, see Traffic light coalition.

"Traffic Signal" redirects here. For the 2007 Bollywood film, see Traffic Signal (film).

"Traffic Light" redirects here. For the Fox comedy show, see Traffic Light (TV series).

An LED traffic light (Siemens Helios) in Portsmouth, United Kingdom.

Traffic lights, which may also be known as stoplights, traffic lamps, traffic signals, stop-and-go lights, robots or semaphore, are signalling devices positioned at road intersections, pedestrian crossings and other locations to control competing flows of traffic. Traffic lights have been installed in most cities around the world. They assign the right of way to road users by the use of lights in standard colors (red - amber/yellow - green), using a universal color code (and a precise sequence to enable comprehension by those who are color blind). In China, there were unsuccessful attempts to change the meaning of "red" to "go" during the Cultural Revolution.

Typically traffic lights consist of a set of three colored lights: red, orange and green. In a typical cycle,

• Illumination of the green light allows traffic to proceed in the direction denoted,
• Illumination of the amber/orange light denoting, if safe to do so, prepare to stop short of the intersection, and
• Illumination of the red signal prohibits any traffic from proceeding.

Usually, the red light contains some orange in its hue, and the green light contains some blue, to provide some support for people with red-green color blindness. Indeed, "green" lights in many areas in fact are blue lenses with a yellowish light behind (often accomplished by reducing the voltage to extend lamp life), the mixture of blue and yellow yielding a green appearance.

History

Marshalite traffic signal. Formerly fitted in various intersections in Melbourne, Australia, indicating how much time remained before a signal change.

On December 10, 1868, the first traffic lights were installed outside the British Houses of Parliament in London, by the railway engineer J. P. Knight. They resembled railway signals of the time, with semaphore arms and red and green gas lamps for night use. The gas lantern was turned with a lever at its base so that the appropriate light faced traffic. Unfortunately, it exploded on 2 January 1869, injuring or killing the policeman who was operating it.

The modern electric traffic light is an American invention. As early as 1912 in Salt Lake City, Utah, policeman Lester Wire invented the first red-green electric traffic lights. On 5 August 1914, the American Traffic Signal Company installed a traffic signal system on the corner of East 105th Street and Euclid Avenue in Cleveland, Ohio. It had two colors, red and green, and a buzzer, based on the design of James Hoge, to provide a warning for color changes. The design by James Hoge allowed police and fire stations to control the signals in case of emergency. The first four-way, three-color traffic light was created by police officer William Potts in Detroit, Michigan in 1920. In 1922, T.E. Hayes patented his "Combination traffic guide and traffic regulating signal" (Patent # 1447659). Ashville, Ohio claims to be the location of the oldest working traffic light in the United States, used at an intersection of public roads until 1982 when it was moved to a local museum.

The installation of a traffic signal in San Diego in December 1940

The first interconnected traffic signal system was installed in Salt Lake City in 1917, with six connected intersections controlled simultaneously from a manual switch. Automatic control of interconnected traffic lights was introduced March 1922 in Houston, Texas. The first automatic experimental traffic lights in England were deployed in Wolverhampton in 1927. In 1923, Garrett Morgan patented his own version. The Morgan traffic signal was a T-shaped pole unit that featured three hand-cranked positions: Stop, in all -directional stop position. This third position halted traffic in all directions to allow pedestrians to cross streets more safely. Its one "advantage" over others of its type was the ability to operate it from a distance using a mechanical linkage.

The color of the traffic lights representing stop and go might be derived from those used to identify port (red) and starboard (green) in maritime rules governing right of way, where the vessel on the left must stop for the one crossing on the right.

Timers on traffic lights - The Greenwalking originated in Taipei, Taiwan in March 18 , 1999, and brought to the US after an engineer discovered its use. Though uncommon in most American urban areas, timers are still used in some other Western Hemisphere countries. Timers are useful for drivers/pedestrians to plan if there is enough time to attempt to cross the intersection before the light turns red and conversely, the amount of time before the light turns green.

Types

Main article: List of variations in traffic light signalling and operation

Traffic lights can have several additional lights for filter turns or bus lanes. This one in Warrington, United Kingdom, also shows the red + amber combination seen in a number of European countries. It also shows the backing board and white border used to increase the target value of the signal head. Improved visibility of the signal head is achieved during the night by using the retro-reflective white border.

Single aspects

The simplest traffic light comprises either a single or a pair of colored aspects that warns any user of the shared right of way of a possible conflict or danger.

• Flashing Red: Treat as a stop sign
• Flashing Amber: Caution, crossing or road hazard ahead
• Flashing Green: Varies among jurisdiction

Dual aspects

These are often seen at railway crossings and at intersections of streets and emergency department driveways. They will flash amber when cross traffic is not expected, and turn red to stop traffic when cross traffic occurs.

Three or more aspects

The universal standard is for the red to be above the green, with amber placed in between. () When mounted vertically red is on top, but when mounted horizontally the red light's location depends on the rule of the road, being on the left in a country that drives on the right (e.g. Turkey) and on the right in a country that drives on the left (e.g. Suriname). In addition to the standard red, amber, and green aspects, other aspects are usually mounted when intersection require more control (i.e. public transport, and permissive turns). Traffic lights in this configuration tend to have a delay between any entry points to allow any residual traffic in the intersection to clear. The delay can be dependent upon the type of intersection, traffic, and road conditions.

The three-aspect standard is also used at locks on the Upper Mississippi River in the United States. Red indicates that another vessel which has the right-of-way is currently locking through or will do so soon. Amber indicates that the lock chamber is being filled or emptied to match the pool level of the approaching vessel. Once the lock gates have opened, a green signal indicates that the approaching vessel may enter the lock chamber.

In Quebec, signal bulbs are often mounted horizontally with each color being a distinct shape: red is a square (larger than the conventional circle); yellow is a diamond shape, and green is the usual circle.

Pedestrian and cyclist crossing lights

Sounds

In some jurisdictions such as Australia, pedestrian lights are associated with a sound device, for the benefit of blind pedestrians. These make a slow beeping sound when the pedestrian lights are red (beep ..... beep ..... beep) and a continuous buzzing sound when the lights are green. In New South Wales the sound is produced in the same unit as the push buttons.

European Standard

Bicycle traffic lights in Vienna

The European approach to a signalized crossing is use dual or more rarely, a triple aspect. with a blackened out lens of a Pictogram pedestrian. For cyclist, the same approach is used with the lens blackened out for a bicycle frame. It is not uncommon to see lenses with both symbols on them.

Light Sequence;
Green: Cross.
Yellow: Continue to cross only if unable to stop safely.
Flashing Yellow: Cross with caution, usually used when lights are out of order or shut down for the night, for low traffic
Red: Do not cross

Ampelmännchen pedestrian traffic signals have come to be seen as a nostalgic sign for the former German Democratic Republic.

North American Standard

In North America, the most common aspects found are text only lenses (WALK/ DON'T WALK), and the pictogram stop hand (in Red/Orange) and a walking person (in Green or White). Increasing for retrofits of dual aspects and newer installations, the lower aspect formally used for the walk signal (walking person) is being replaced with a timer countdown.

Light Sequence;
Green or White (Walking Human or WALK); Cross with caution
Flashing Red/Orange (Stop hand or DON'T WALK); Continue to cross if already in the intersection. Do not start to cross
Red/Orange; Do not cross

The State of Massachusetts allows an unusual indication variation for pedestrian movement. At signalized intersections without separate pedestrian signal heads the traffic signals may be programmed to turn red in all directions, followed by a steady display of yellow lights simultaneously with the red indications. During this red-plus-yellow indication the intersection is closed to vehicular traffic and pedestrians may cross, usually in whatever direction they choose. Please see Wikipedia- List of Variations in Traffic Light Signalling and Operation for a more complete discussion on unusual traffic signal indications.

Asia

Japan
India
Korea
Green: Cross
Amber: Cross if already in intersection, otherwise do not (however by law, you are allowed to cross)
Red: Do not cross
Red Flashing Traffic Light
Green (sometimes blue) Arrow: Turn only the direction the arrow points Pedestrians:
Green man: Walk Human
Flashing Green Man: Cross if already in intersection, otherwise do not
Flashing Green Traffic Light
Red Man: Do not cross
Japan generally does not have timers that accompany the signal, however some new signals will have this function.
Some traffic lights in Korea have countdown timers for predestrian crossing lights, usually they countdown from 30 when the green flashing man appears.

Oceania

Some traffic-light controlled junctions have a light sequence that stops all vehicular traffic at the junction at the same time, and gives pedestrians exclusive access to the intersection so that they can cross in any direction (including diagonally). This is known as a pedestrian scramble in some places.

Australia: In Australia, a red man means do not cross, a green man means cross and a red flashing man means finish crossing. Some traffic lights in Melbourne have countdown timers for predestrian crossing lights, usually they countdown from 30 when the red flashing man appears. This however was a trial and was removed as it resulted in large amounts of jaywalking.

Lights for public transport

4-lamp public transport traffic light in Moscow, Russia, showing "stop" signal.

Traffic light in Munich, Germany, showing a special bus signal.

Traffic lights for public transport often use signals that are distinct from those for private traffic. They can be letters, arrows or bars of white or colored light.

In Portland, Oregon, the tram signals feature a horizontal white bar and an orange vertical bar. Some systems use the letter B for buses, and T for trams.

In Russia, dedicated traffic signals for public transport (tram, trolleybus or bus) have four white lights that form the letter T. If the three top lamps are lit, this means "stop". If the bottom lamp and some lamps on the top row are lit, this means permission to go in a direction shown. In case of a tram signal, if there are no tram junctions on an intersection, a simpler system of one amber signal in the form of letter T is used instead; the tram must proceed only when the signal is lit.

In North European countries the tram signals feature white lights of different forms: "S" for "stop", "—" for "caution" and arrows to permit passage in a given direction.

The Netherlands use a distinctive "negenoog" (nine-eyed) design shown on the top row of the diagram; bottom row signals are used in Belgium and France. The signals mean (from left to right): "go straight ahead", "go left", "go right", "go in any direction" (like the "green" of a normal traffic light), "stop, unless the emergency brake is needed" (equal to "yellow"), and "stop" (equal to "red").

The Hiawatha Line in Minneapolis, Minnesota uses a simplified variant of the Belgian/French system in the city's central business district where only the "go" and "stop" configurations are used. A third signal equal to yellow is accomplished by flashing the "go" signal.

In Japan, tram signals are under the regular vehicle signal; however the color of the signal for the tram is coloured orange.

Preemption

Main article: Traffic signal preemption

Some regions have signals that are interruptible, giving priority to special traffic. Such traffic light preemption is usually reserved for emergency vehicles such as fire apparatus, ambulances, and police squad cars, though sometimes mass transit vehicles including buses and light rail trains can interrupt lights. Most of the systems operate with small transmitters that send radio waves, infrared signals, or strobe light signals that are received by a sensor on or near the traffic lights. Some systems use audio detection, where a certain type of siren must be used and detected by a receiver on the traffic light structure.

Upon activation the normal traffic light cycle is suspended and replaced by the "preemption sequence": the traffic lights to all approaches to the intersection are switched to "red" with the exception of the light for the vehicle that has triggered the preemption sequence. Sometimes, an additional signal light is placed nearby to indicate to the preempting vehicle that the preempting sequence has been activated and to warn other motorists of the approach of an emergency vehicle. The normal traffic light cycle resumes after the sensor has been passed by the vehicle that triggered the preemption.

In lieu of pre-emptive mechanisms, in most jurisdictions, emergency vehicles are not required to respect traffic lights, but must activate their own emergency lights when crossing an intersection against the light, in order to alert oncoming drivers to the preemption.

Turning signals and rules

Animation of a 4-state traffic signal cycle

A traffic signal in Halifax, Nova Scotia, Canada with specially-shaped lights to assist people with colour blindness.

In some instances, traffic may turn left (in left-driving jurisdictions) or right (in right-driving jurisdictions) after stopping at a red light, providing they give way to the pedestrians and other vehicles. In some places that generally disallow this, a sign next to the traffic light indicates that it is allowed at a particular intersection. Conversely, jurisdictions that generally allow this might forbid it at a particular intersection with a "no turn on red" sign, or put a green arrow to indicate specifically when a turn is allowed without having to yield to pedestrians (this is usually when traffic from the perpendicular street is making a turn onto one's street and thus no pedestrians are allowed in the intersection anyway). Some jurisdictions allow turning on red in the opposite direction (left in right-driving countries; right in left-driving countries) from a one-way road onto another one-way road; some of these even allow these turns from a two-way road onto a one-way road. Also differing is whether a red arrow prohibits turns; some jurisdictions require a "no turn on red" sign in these cases. A study in the State of Illinois (a right-driving jurisdiction) concluded that allowing drivers to proceed straight on red after stopping, at specially posted T-intersections where the intersecting road went left only, was dangerous. Proceeding straight on red at T-intersections where the intersecting road went left only used to be legal in Mainland China, with right-hand traffic provided that such movement would not interfere with other traffic, but when the Road Traffic Safety Law of the People's Republic of China took effect on 1 May 2004, such movement was outlawed. In some other countries, the permission is indicated by a flashing amber arrow (cars do not have to stop but must give way to other cars and pedestrians).

Another distinction is between intersections that have dedicated signals for turning across the flow of opposing traffic and those that do not. Such signals are called dedicated left-turn lights in the United States and Canada (since opposing traffic is on the left). With dedicated left turn signals, a left-pointing arrow turns green when traffic may turn left without opposing traffic and pedestrian conflict, and turns red or disappears otherwise. Such a signal is referred to as a "protected" signal if it has its own red phase; a "permissive" signal does not have such a feature. Three standard versions of the permissive signal exist: One version is a horizontal bar with five lights - the green and yellow arrows are located between the standard green and yellow lights. A vertical 5-light bar holds the arrows underneath the standard green light (in this arrangement, the yellow arrow is sometimes omitted, leaving only the green arrow below the solid green light, or possibly an LED based device capable of showing both green and yellow arrows within a single lamp housing). Some newer LED turn arrows seen in parts of Canada are capable of multicolored animation. Such lights will often display a flashing and animated green or yellow arrow when the dedicated turn is allowed, but then transform into a red arrow on a white background with a red line through it, emphasising that the turn is no longer allowed. These lights will also often have the words "NO TURN" displayed, or an explanatory reason why the turn is not allowed, such as "TRAIN" in the case of a rail or light rail crossing. A third type is known as a "doghouse" or "cluster head" - a vertical column with the two normal lights is on the right side of the signal, a vertical column with the two arrows is located on the left, and the normal red signal is in the middle above the two columns. Cluster signals in Australia and New Zealand use six signals, the sixth being a red arrow that can operate separately from the standard red light. In a fourth type, sometimes seen at intersections in Ontario and Quebec, Canada, there is no dedicated left-turn lamp per se. Instead, the normal green lamp flashes rapidly, indicating permission to go straight as well as make a left turn in front of opposing traffic, which is being held by a steady red lamp. (This "advance green," or flashing green can be somewhat startling and confusing to drivers not familiar with this system. This also can cause confusion amongst visitors to British Columbia, where a flashing green signal denotes a pedestrian controlled intersection.) Another interesting practice seen at least in Ontario is that cars wishing to turn left that arrived after the left turn signal ended can do so during the amber phase, as long as there is enough time to make a safe turn.

A flashing amber arrow, which allows drivers to make left turns after giving way to oncoming traffic, is becoming more widespread in the United States, particularly in Oregon. In the normal sequence, a protected green left-turn arrow will first change to a solid amber arrow to indicate the end of the protected phase, then to a flashing amber arrow, which remains flashing until the standard green light changes to amber and red. These generally take the form of four signal sections (green, amber, amber, red). On some newer signals, notably in the city of Bend, the green and flashing amber arrows emanate from the same light section through the use of a dual-color LED array, while the solid amber arrow is mounted above it.

Generally, a dedicated left-turn signal is illuminated at the beginning of the green phase of the green-yellow-red-green cycle. This is called a leading turn. This allows left-turn traffic, which often consists of just a few cars, to vacate the intersection quickly before giving priority to vehicles traveling straight. This increases the throughput of left-turn traffic while reducing the number of drivers, perhaps frustrated by long waits in heavy traffic for opposing traffic to clear, attempting to make an illegal left turn on red. A dedicated left-turn signal that appears at the end of the green phase is called a lagging turn. If there is no left-turn signal, the law requires one to yield to oncoming traffic and turn when the intersection is clear and it is safe to do so. Nevertheless, it is increasingly and disturbingly common in at least the U.S. to see drivers who do not yield in the absence of a dedicated signal, cutting off traffic that has right-of-way and is starting to head across the intersection. In the U.S., many older inner-city and rural areas do not have dedicated left-turn lights, while most newer suburban areas have them. Such lights tend to decrease the overall efficiency of the intersection as it becomes congested, although it makes intersections safer by reducing the risk of head-on collisions and may even speed up through traffic, but if a significant amount of traffic is turning, a dedicated turn signal helps eliminate congestion.

Some intersections with protected-turn signals occasionally have what is known as "Orange trap", "lag-trap", or "left turn trap" (in right-driving countries). It occurs at intersections where vehicles are permitted to make left turns on normal green lights. "Orange trap" refers to situations when left-turning drivers are trapped in the intersection with a red light, while opposing traffic still has a green. In British Columbia, the law addresses this problem by giving a left-turning driver already in an intersection the right-of-way to make the turn once the intersection is otherwise clear, regardless of the traffic light state.

For example, an intersection has dedicated left-turn signals for traffic traveling north. The southbound traffic gets a red light so northbound traffic can make a left turn, but the straight-through northbound traffic continues to get a green light. A southbound driver who had entered the intersection earlier will now be in a predicament, since they have no idea whether traffic continuing straight for both directions is becoming red, or just their direction. The driver will now have to check the traffic light behind them, which is often impossible from the viewing angle of a driver's seat. This can also happen when emergency vehicles or railroads preempt normal signal operation. In the United States, signs reading "Oncoming traffic has extended green" or "Oncoming traffic may have extended green" must be posted at intersections where the "Orange trap" condition exists.

Although motorcycles and scooters in most jurisdictions follow the same traffic signal rules for left turns as do cars and trucks, some places, such as Taiwan, have different rules. In these areas, it is not permitted for such small and often hard-to-see vehicles to turn left in front of oncoming traffic on certain high-volume roads when there is no dedicated left-turn signal. Instead, in order to make a left turn, the rider moves to the right side of the road, travels through the first half of the intersection on green, then slows down and stops directly in front of the line of cars on the driver's right waiting to travel across the intersection, which are of course being held by a red light. There is often a white box painted on the road in this location to indicate where the riders should group. The rider turns the bike 90 degrees to the left from the original direction of travel and proceeds along with the line of cars when the red light turns green, completing the left turn. This procedure improves safety because the rider never has to cross oncoming traffic, which is particularly important given the much greater likelihood of injury when a cycle is hit by a car or truck. This system (called a "hook turn") is also used at many intersections in the CBD of Melbourne, Australia, where either or both streets carry tramways. This is done so right-turning vehicles (Australia drives on the left) do not block the passage of trams. The system is being extended to the suburbs.

Lane control

Main article: Lane control lights

Lane-control lights are a specific type of traffic light used to manage traffic on a multi-way road, highway or tollway. Typically, these lights allow or forbid traffic to use one or more of the available lanes by the use of green lights or arrows (to permit) or by red lights or crosses (to prohibit). In the US, lane-control lights are often used to control and/or direct the flow of traffic through toll plazas and highway tunnels, such as during unusually-heavy traffic flow when more lanes may be required in one direction than in the other direction, or during a hurricane evacuation, when the lane signals for all lanes will show green for one direction to assist in more rapid traffic flow from the evacuation site. Lane-control lights are also used at highway weigh stations to direct tractor-trailers and other heavy or oversized vehicles into the proper lanes for weighing, inspection or exit.

Many states in the United States, most notably the southeastern states, use a "continuous-flow" lane. This lane is protected by a single, constant-green arrow pointing down at the lane(s) (in some cases the arrow may point up) permitting the continuous flow of traffic, without regard to the condition of signals for other lanes or cross streets. Continuous lanes are restricted in that vehicles turning from a side street may not cross over the double-white line to enter the continuous lane, and no lane changes are permitted to the continuous lane from an adjacent lane or from the continuous lane to an adjacent lane, until the double-white line has been passed. Some continuous lanes are protected by a raised curb located between the continuous lane and a normal traffic lane, with white and/or yellow reflective paint or tape, prohibiting turning or adjacent traffic from entering the lane. Continuous-flow traffic lanes are found only at "T" intersections where there is no side street or driveway entrance on the right side of the main thoroughfare; additionally, no pedestrians are permitted to cross the main thoroughfare at intersections with a continuous-flow lane, although crossing at the side street may be permitted. Intersections with continuous-flow lanes will be posted with a white regulatory sign approximately 500 feet before the intersection with the phrase, "Right Lane Continuous Traffic," or other similar wording. If the arrow is extinguished for any reason, whether by malfunction or design, traffic through the continuous lane will revert to the normal traffic pattern for adjacent lanes, except that turning or moving into or out of the restricted lane is still prohibited.

Special provisions

Traffic light failure in most jurisdictions must be handled by drivers as a priority-to-the-right intersection in both drive-on-the-left Australia and some states of the mainly drive-on-the-right Europe, or an all-way stop elsewhere, pending the arrival of a police officer to direct traffic. Traffic lights save over 11,000 lives per year.

Some jurisdictions, however, have additional right-of-way signs mounted above, below or next to the traffic lights; these take effect when the lights are no longer active. (In Italy as well as some jurisdictions in the US, traffic lights inactive at nighttime emit an amber-colored flashing signal in directions owing priority while the intersecting street emit a flashing red light, requiring drivers to stop before proceeding. In Germany the priority directions will not be illuminated while the intersecting streets will be shown a flashing yellow signal.) In the UK and parts of North America, drivers simply treat the junction as being uncontrolled when traffic lights fail, giving way as appropriate, unless a police officer is present. In much of the United States failed traffic signals must be treated as all-way stop intersections.

Dummy lights

Historic dummy light in Canajoharie, New York, United States

In an era when intersections were often controlled by a single traffic signal head, many signals were installed on pedestals in the centers of intersections. Often referred to as "dummy lights," these installations often replaced beacons or "mushrooms" that denoted the centers of intersections and separated opposing traffic, with the infrastructure used for the beacons and mushrooms serving the new "stop and go" type signals.

There are a handful of operational dummy lights still in service. Three are located in New York State: Beacon, Canajoharie and Croton-on-Hudson.

After a dummy light was knocked down by a truck in 2010, the City of Coleman Texas decided to preserve and refurbish its last two pedestal mounted dummy lights as part of its historic district preservation efforts.

In 2011 The Arkansas Historic Preservation Program nominated the last remaining pedestal mounted signal in Arkansas, located in Smackover, AR, to be listed in the National Register of Historic Places.

Increases in traffic flows have prompted calls for these types of traffic lights to be removed due to safety concerns, but their historic value has kept these landmarks at their original locations. To serve historic district applications, Teeco Safety Systems of Shreveport, LA still manufactures replacement fixed 4-way traffic signals for pedestal and overhead span wire installations.

Technology

Optics and lighting

An example of an LED traffic light Australia

Traditionally, incandescent and halogen bulbs were used. Because of the low efficiency of light output and a single point of failure (filament burnout) municipalities are increasingly retrofitting traffic signals with LED arrays that consume less power, have increased light output, last significantly longer, and in the event of an individual LED failure, still operate albeit with a reduced light output. With the use of optics, the light pattern of an LED array can be comparable with the pattern of an incandescent or halogen bulb.

Programmable visibility signals

3M traffic signals installed in Shelton, Washington, United States. Standing off-axis from the intended viewing area, these signals appear to be "off" or invisible to adjacent lanes of traffic during the daytime. (A faint glow is present in the lit indication when viewed at night)

The same two signals above, taken in the signal's intended viewing area (a single lane of northbound traffic). Special light-diffusing optics and a colored fresnel lens create the indication.

Signals such as the 3M High Visibility Signal and McCain Programmable Visibility signal, utilize light diffusing optics and a powerful fresnel lens to create the signal indication. Lit via a powerful 150W PAR46 sealed-beam lamp, the light from the lamp in these "programmable visibility" signals passes through a set of two glass lenses at the back of the signal. The first lens, a frosted glass diffusing lens, diffuses the light into a uniform ball of light around five inches in diameter. The light then passes through a nearly identical lens known as an optical limiter (3M's definition of the lens itself), also known as a "programming lens", also five inches in diameter.

Using a special aluminum foil-based adhesive tape, these signals are "masked" or programmed via the programming lens so that only certain lanes of traffic will view the indication. At the front of these programmable visibility signals is a 12" fresnel lens, each lens tinted to meet United States Institute of Transportation Engineers (ITE) chromaticity and luminance standards. The fresnel lens (3M utilized a square lens masked to create a ball indication, McCain used a circular lens itself) focuses or concentrates the light output created by the lamp, and creates a uniform display of light for the lane in which it is intended. These signals were first developed by the 3M Company in the late 1960s, and were wildly popular in the late 1970s as traffic density increased.

In addition to being positioned and mounted for desired visibility for their respective traffic, some traffic lights are also aimed, louvered, or shaded to minimize mis-interpretation from other lanes. For example, a Fresnel lens on an adjacent through-lane signal may be aimed to prevent left-turning traffic from anticipating its own green arrow. One example of the Fresnel lens application common in the USA is the 3M Model 131 traffic signal (dubbed the "Programmed Visibility" signal). Although 3M has recently discontinued the M-131, it became a popular traffic signal for skewed or complex intersections. Today, McCain Traffic Systems (a traffic signal manufacturing company based in Vista, California) is the only U.S.-based manufacturer producing true "programmable visibility" traffic signals. In addition to aiming, Fresnel lenses, and louvers, visors and back panels are also useful in areas where sunlight would diminish the contrast and visibility of a signal face.

Typical applications for these signals were skewed intersections, specific multi-lane control, left-turn pocket signals or other areas where complex traffic situations existed.

Conventional lighting systems

Conventional traffic signal lighting, still common in some areas, utilizes a standard light bulb. Typically, a 67 watt, 69 watt, or 115 watt medium-base (household lamp in the U.S) light bulb provides the illumination. Light then bounces off a mirrored glass or polished aluminium reflector bowl, and out through a polycarbonate plastic or glass signal lens. In some signals, these lenses were cut to include a specific refracting pattern. Crouse-Hinds is one notable company for this practice. In the 1930s throughout the 1950s, they utilized a beaded prismatic lens with a "smiley" pattern embossed into the bottom of each lens.

Light design

In the United States, traffic lights are currently designed with lights approximately 12 inches (300 mm) in diameter. Previously the standard had been 8 inches (200 mm), however those are slowly being phased out in favor of the larger and more visible 12 inch lights. Variations used have also included a hybrid design, which had one or more 12 inch lights along with one or more lights of 8 inches (200 mm) on the same light. For example, these "12-8-8" (along with 8-8-8) lights are standard in most jurisdictions in Ontario, Manitoba, and British Columbia (that, is, the red light is 12 and others 8, making the red more prominent).

In the United Kingdom, 12 inch lights were implemented only with Mellor Design Signal heads designed by David Mellor. These were designed for symbolic optics to compensate for the light loss caused by the symbol. With the invention of anti-phantom, highly visible SIRA lenses, lights of 8 inches (200 mm) could be designed to give the same output as plain lenses, so a larger surface area was unnecessary. Consequently lights of 12 inches (300 mm) are no longer approved for use in the UK and all lights installed on new installations have to be 200 millimetres (8 in) in accordance with TSRGD (Traffic Signs Regulations and General Directions). Exemptions are made for temporary or replacement signals.

In the state of Victoria, Australia, lights used to have long visors with a slanted cut on the side nearest the road (for approach side) and none for the opposite side. These lights also had a sort of horizontal filter covering the upper half of the visor, except on arrows. This design eliminated or minimised washout of the light by a low-lying sun. This type of design has yet to surface outside of Victoria. LED-based lights, however, do not follow this standard, adopting the national standard of having a short visor and cut on both sides, although the cut is also applied to the lights on the opposite side of the junction. Some installations do not have cuts on the opposite side. There exists at least 1 LED-based light using the visor and filter set of its predecessor.

Control and coordination

Main article: Traffic light control and coordination

The normal function of traffic lights requires sophisticated control and coordination to ensure that traffic moves as smoothly and safely as possible and that pedestrians are protected when they cross the roads.

Mounting

There are significant differences from place to place in how traffic lights are mounted or positioned so that they are visible to drivers. Depending upon the location, traffic lights may be mounted on poles situated on street corners, hung from horizontal poles or wires strung over the roadway, or installed within large horizontal gantries that extend out from the corner and over the right-of-way. In the last case, such poles or gantries often have a lit sign with the name of the cross-street.

• Typical light mounting in Calgary, Alberta, Canada.
  Typical light mounting in Calgary, Alberta, Canada.
• 
  An example of a wire-mounted traffic light in Fort Worth, Texas, United States.
• 
  A typical traffic light on Ninth Avenue in New York City.

Japan, Malaysia, South Korea, Singapore, Taiwan, Thailand and Croatia, along with some jurisdictions in the U.S. (including New Mexico, Wisconsin, most of Texas, Florida, Nebraska, and some localities in Kansas, New Jersey and Louisiana.), the provinces of Alberta, Saskatchewan, Québec, Nova Scotia, some of New Brunswick and Newfoundland and Labrador and the territories of Northwest Territories and Yukon in Canada, as well as some places in Mexico mount lights with their multiple faces arranged horizontally, often with supplemental vertical signals on the side, while others use vertical signals almost exclusively. Horizontal signals have consistent orientation, like their vertical counterparts. Often, supplemental curb pedestal mounts, intended to support a signal for a different approach road, are used when primary signals are partially obscured due to structures such as overpasses, approaches around a building that obscures the primary signal mountings, and unusual approach geometry. In Florida, horizontal signals mounted on poles, known as "mast arms", are in wide use due to their lower wind profile, important for minimising hurricane damage. The horizontally mounted traffic light position is very common in Texas (with the exceptions of Fort Worth and most of downtown Dallas), New Mexico, and South Florida on most intersections. In areas where wind-load is not as major a concern as ice-load such as Illinois or Minnesota the lights are mounted vertically to reduce the accumulation of ice or snow over the surface of the signal heads. In Nebraska, horizontal lights are used throughout the state, except for Omaha and intersections with wire-span assemblies.

California is particularly rigorous in ensuring that drivers can see the current state of a traffic light. One entrance to a typical large intersection, with three through lanes, two dedicated left-turn lanes, and a crosswalk, may have as many as three traffic lights for the left-turn lanes, three for the through lanes, and a pedestrian signal for the crosswalk. Those numbers must be multiplied by four to cover all four ways to enter a typical intersection.

Example of horizontal mounted traffic light in Atlantic City, New Jersey, United States

Traffic signals in most areas of Europe are located at the stop line on same side of the intersection as the approaching traffic (there being both right- and left-hand traffic) and are often mounted overhead as well as on side of the road. At particularly busy junctions for freight, higher lights may be mounted specifically for trucks. The stop line alignment is done to prevent vehicles blocking any crosswalk blocking and allow for better pedestrian traffic flow. There may also be a special area a few metres in advance of the stop line where cyclists may legally wait but not motor vehicles; this advanced stop line is often painted with a different road surface with greater friction and a high color, both for the benefit of cyclists and for other vehicles. The traffic lights are mounted so that cyclists can still see them.

In North America, there is often a pole-mounted signal on the same side of the intersection, but additional pole-mounted and overhead signals are usually mounted on the far side of the intersection for better visibility. In some areas, signals facing all four directions are hung directly over the intersection on a wire strung diagonally over the intersection.

Implementation

According to transportation engineers, traffic lights can have both positive and negative effects on traffic safety and traffic flow. The separation of conflicting streams of traffic in time can reduce the chances of right-angle collisions. But also the frequency of rear-end crashes can be increased by the installation of traffic lights, and they can adversely affect the safety of bicycle and pedestrian traffic. They can increase the traffic capacity at intersections, but can also result in excessive traffic delay. Hans Monderman, the innovative Dutch traffic engineer, and pioneer of shared space schemes, was sceptical of their role, and is quoted as having said of them: "We only want traffic lights where they are useful and I haven't found anywhere where they are useful yet".

Small vehicle safety

In some instances the stoplight traffic detector will not change the light for small vehicles such as motorcycles, scooters and particularly bicycles, because the induction loop sensor fails to detect the small vehicle. A vehicle with sufficient mass of metal such as steel interacts with the sensors magnetic field causing the light to change at the appropriate time. Motorcycles and scooters have much less mass than cars, resulting in a failure to trigger the sensor, while bicycles may not even be constructed with metal. This situation most often occurs at the times of day when other traffic is sparse as well as when the small vehicle is coming from a direction that does not have a high volume of traffic. Not all sensor traffic lights have this problem. There are some that can pick up these vehicles without problems and most are capable of doing so. However, through road construction and other processes, they are not properly adjusted or calibrated for the small vehicles. Magnetic field sensors detect vehicles passing over them and not necessarily stationary vehicles.

Some states in the United States have passed laws which give motorcyclists the right to proceed past a red light with caution after stopping when the device which causes the light to change from red to green does not activate.

Traffic signal warrants

Template:Globalize/USA Traffic signals have strengths and weaknesses that must be considered when deciding whether to install them. Signaled intersections can reduce delay for side road traffic and reduce the occurrence of collisions by turning traffic and cross traffic. But they may also cause delay for traffic on the main road, and often increase rear-end collisions by up to 50%. Since right-angled and turn-against-traffic collisions are more likely to result in injuries, this is often an acceptable trade-off.

US Department of Transportation Manual of Uniform Traffic Control Devices

Criteria have been developed to help ensure that new signals are installed only where they will do more good than harm. In the United States these criteria are called warrants, and are found in the Manual on Uniform Traffic Control Devices (MUTCD), the Federal regulation covering the use of signs, pavement markings, traffic signals, and similar devices.

In the US MUTCD, there are nine warrants for traffic signals:

• Eight-Hour Vehicular Volume. Traffic volume must exceed prescribed minima for eight hours of an average day (usually a weekday).
• Four-Hour Vehicular Volume. Traffic volume must exceed prescribed minima for four hours of an average day.
• Peak Hour Volume or Delay. This is applied only in unusual cases, such as office parks, industrial complexes, or park and ride lots that attract or discharge large numbers of vehicles in a short time, and, for a minimum of one hour of an average day. The side road traffic suffers undue delay when entering or crossing the major street.
• Pedestrian Volume, if the traffic volume on a major street is so heavy that pedestrians experience excessive delay in attempting to cross it
• School Crossing, if there not enough safe gaps in traffic for school children to safely cross the street
• Coordinated Signal System, for places where adjacent traffic control signals do not keep traffic grouped together efficiently.
• Crash Experience. The volumes in the eight- and four-hour warrants may be reduced if five or more right-angle and cross traffic turn collisions have happened at the intersection in a twelve month period.
• Roadway Network. Installing a traffic control signal at some intersections might be justified to encourage concentration and organization of traffic flow on a roadway network.
• Intersection Near a Grade Crossing. A traffic control signal is often justified at an intersection near a railroad crossing, in order to provide a preemption sequence to allow traffic queued up on the tracks an opportunity to clear the tracks before the train arrives.

An intersection should meet one or more of these warrants before a signal is installed. However, meeting one or more warrants does not require the installation of a traffic signal, only suggests that they may be suitable. It could be that a roundabout would work better there. There may be other unconsidered conditions that lead to traffic engineers to conclude a signal is undesirable. For example, they may decide not to install a signal at an intersection if traffic stopped by it will back up and block another, more heavily trafficked intersection. Also, if a signal meets only the peak hour warrant, the advantages during that time may not outweigh the disadvantages during the rest of the day.

Between 1979 and 1988, the city of Philadelphia removed 199 signals that did not meet any of the warrants. On average, the intersections had 24% fewer crashes after the unwarranted signals were removed.

Legal implications

File:Redlightfinesign.jpg

Attempt to discourage red light running by posting the minimum fine, which has increased by $1.09 since this photo was taken.

File:Stoponredbanner.jpg

Another method is to simply remind drivers what red means through advertising campaigns.

In virtually all jurisdictions in which they are used, it is an offence for motorists (and other road users) to disregard the instructions of traffic lights (or other traffic control devices). Exceptionally, it is not an offence for pedestrians to cross against a red light in the United Kingdom, where pedestrian lights officially give advice, rather than an instruction, although UK pedestrians do commit an offence if they cross a road against the signals of a police officer controlling traffic.

The most common infraction associated with traffic lights is failing to stop for a red light (in some jurisdictions, running an amber light can also incur a penalty). Enforcement of traffic lights varies from jurisdiction to jurisdiction; some places are extremely strict. Other locales are infamous for traffic lights being routinely ignored by motorists, with no serious attempts by law enforcement to alter the situation.

Jurisdictions differ somewhat on how to deal with "red light running" — attempts by motorists to race to an intersection while facing a yellow light, in an attempt to beat the red. In some locales, as long as the light is yellow when the motorist enters the intersection, no offense has been committed; in others, if the light turns red at any time before the motorist clears the intersection, then an offense occurs. In Oregon and other places, a stricter standard applies-—running an amber light is an offense, unless the motorist is unable to stop safely. This standard has been criticized as ambiguous and difficult to enforce (red light cameras in Oregon are activated only if a motorist enters the intersection on a red). Red light cameras in NSW, Australia are activated only if a motorist enters an intersection 0.3 seconds after the light has turned red.

In some jurisdictions (such as Toronto, Washington D.C., New York City, and the state of California), there are ordinances against "gridlocking." A motorist entering an intersection (even if on a green light) but is unable to proceed and gets stranded in the intersection (when traffic ahead fails to proceed), and remains after the light turns red (thus blocking traffic from other directions) may be cited. The definition of the intersection area is that square where the two streets overlap marked by the inner lines of each crosswalk. (Occupying the space inside the crosswalk lines is itself a traffic infraction, but different from gridlocking.) This gives the meaning to the anti-gridlock slogan "Don't Block the Box." This is sometimes used as a justification for making a turn across the opposing travel lanes on a red light at a busy intersection, by pulling partway into the intersection at a green light waiting to perform the turn, and, if oncoming traffic is not abated before the light changes to red, proceeding to turn once the light has turned red and opposing traffic has stopped. This means that at busy junctions without a protected green arrow for turning traffic, one turns after the light turns red. This maneuver is commonly referred to as "occupying the intersection" or "being legally allowed to complete one's turn". In some jurisdictions, including most American states, a vehicle already in the intersection when the light turns red legally has the right of way, and vehicles who have green must yield to the vehicle in the intersection.

In Sackville, New Brunswick it is customary for through traffic to voluntarily yield to the first oncoming left-turning vehicle to allow it to perform a Pittsburgh left. This is similar to a hook turn performed in Melbourne, Australia, which is legal at signed intersections.

A driver comes to a stop on the crosswalk beyond the stop line as a result of attempting to avoid a red light violation.

Enforcement of traffic lights is done in one of several ways:

• By police officers observing traffic, and issuing citations to motorists who violate the signal.
• As a result of an accident investigation, if it is determined that one or more motorists ran the red light — even if the incident was not observed by a police officer.
• With red light cameras.

Red light cameras

Main article: Red light camera

In some areas, red light cameras are used. An automated camera is connected to the triggering mechanism for the corresponding traffic light, which is targeted to photograph any vehicle, which crosses against the light. The driver or owner (depending on local laws) of a vehicle is photographed so that they can be fined for the violation. In some jurisdictions in the United States, private companies have been contracted to operate traffic-related cameras and in turn receive a portion of the resulting revenues. In some cases red light cameras have been abused by local governments, where vehicle operators have been fined as a result of traffic systems that have been improperly modified.

Light timing length

See also: Traffic light control and coordination

The length of amber lights can differ, for example in many places the length of an amber light is usually 5 seconds, but elsewhere it may be as little as 3 seconds considerably reducing the time for reaction. It is typical for these times to vary according to the set speed limit, with longer times for higher limits. In the state of Georgia, United States, an amber light must be lit one second for every 10 mph of posted speed limit. In this situation, a 45 mph posted speed limit would have a 4.5 second amber light. For intersections with red light cameras, 1 extra second must be added. In Colorado Springs, Colorado, green lights at numerous intersections have been noted with durations of approximately two seconds.

The time from when a red light is displayed and when a cross street is given a green light is usually based on the physical size of the intersection. This intervening period is called the all-red time. A typical all-red time is 3 seconds to allow cars to clear the intersection. In a wider intersection, such as 4 lane road or highway intersection, the all-red time may be as much as 5 seconds, allowing drivers who could not or would not stop at the amber light enough time to clear the intersection without causing a collision.

In other contexts

The symbolism of a traffic light (and the meanings of the three primary colors used in traffic lights) are frequently found in many other contexts. Since they are often used as single spots of color without the context of vertical position, they are typically not comprehensible to up to one in ten males who are color blind.

Traffic lights have also been used in pieces of artwork, particularly the Traffic Light tree in London, UK.

Racing

Automobile racing circuits can also use standard traffic signals to indicate to racing car drivers the status of racing. On an oval track, four sets may be used, two facing a straight-away and two facing the middle of the 180 degree turn between straight-aways. Green would indicate racing is under way, while yellow would indicate to slow or while following a pace car; red would indicate to stop, probably for emergency reasons.

Scuderia Ferrari, a Formula One racing team, formerly used a traffic light system during their pit stops to signal to their drivers to when to leave the pits. The red light was on when the tires were being changed and fuel was being added, yellow was on when the tires were changed, and green was on when all work was completed. The system is (usually) completely automatic. However, the system was withdrawn after the 2008 Singapore Grand Prix, due to the fact that it heavily delayed Felipe Massa during the race, when he was in the lead. Usually, the system was automatic, but heavy traffic in the pit lane forced the team to operate it manually. A mechanic accidentally pressed the green light button when the fuel hose was still attached to the car, causing Massa to drive off, towing the fuel hose along. Additionally, Massa drove into the path of Adrian Sutil, earning him a penalty. He finally stopped at the end of the pit lane, forcing Ferrari's mechanics to sprint down the whole of the pit lane to remove the hose. As a result of this, and the penalty he also incurred, Massa finished 13th. Ferrari decided to use a traditional "lollipop" for the remainder of the 2008 season.

As a rating mechanism

See also: Traffic light rating system and European Union energy label

The colors red, amber and green are often used as a simple-to-understand rating system for products and processes. It may be extended by analogy to provide a greater range of intermediate colors, with red and green at the extremes.

Gallery

• An LED traffic light
  An LED traffic light
• 
  Temporary LED traffic lights with sensor in Australia
• 
  Traffic light on a small intersection in Maryland, United States
• 
  Example of traffic signals mounted on gantries in downtown Cincinnati, Ohio, United States and integrated with street signage.
• Typical example of traffic lights mounted on a wide street in California, United States
  Typical example of traffic lights mounted on a wide street in California, United States
• 
  One example of traffic lights on a suburban street in Santa Clarita, CA
• 
  LED traffic lights in Örnsköldsvik, Sweden.
• 
  Typical set of traffic lights in Spain
• 
  The green on top light in Tipperary Hill, Syracuse, NY.

See also

• Ampelmännchen
• Level crossing
• Pedestrian crossing
• Traffic optimization
• Yellow trap

Notes

36. http://www.eduqna.com/Trivia/1836-1-trivia-4.html.\ 37.http://www.docstoc.com/docs/6220827/Stoplight

References

• City of Beacon. Canajoharie, New York: Credits. Retrieved Sep. 30, 2008.
• Croton-on-Hudson Historical Society. Canajoharie, New York: Credits. Retrieved Sep. 30, 2008.
• Villages of Canajoharie & Palatine Bridge. Canajoharie, New York: Credits. Retrieved Sep. 30, 2008.
• Woods, Arthur (1916). "Keeping City Traffic Moving: One Of The Most Difficult Of All City Problems, And The New Methods Which Have Been Devised To Solve It". The World's Work: A History of Our Time. XXXI. Doubleday, Page & Company: 621–532. Retrieved 2009-08-04. {{cite journal}}: Cite has empty unknown parameter: |coauthors= (help); Unknown parameter |month= ignored (help)

External links

• FHWA Arterial Management Website, latest information on traffic signal operations
• Traffic Lights by Ed Pegg, Jr., Wolfram Demonstrations Project: demonstrates that there are "seven distinct light cycles that will prevent collisions."
• Animations of various US signal phasings
• Micro Controller based Traffic Light Controller.
• SCATS - Sydney Coordinated Adaptive Traffic System
• InSync: The #1 Self-Optimizing Traffic Signal System. Pioneer in Artificial Intelligence and Robotics for Traffic Signal Optimization